! Started logfile: /image_prod/ug002_uva//J1603+1554_S_dfm.log on Thu Mar  5 02:32:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1603+1554_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1603+1554_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.976296 visibilities/baseline/integration-bin.
! Found source: J1603+1554
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7908 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1603+1554_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013446Jy  sigma=9.018325
! Fit after  self-cal, rms=0.860360Jy  sigma=7.663358
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=11.65 mas, bpa=-18.79 degrees
! Estimated noise=1.21176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109894 Jy
! Component: 100  -  total flux cleaned = 0.133858 Jy
! Total flux subtracted in 100 components = 0.133858 Jy
! Clean residual min=-0.004644 max=0.006685 Jy/beam
! Clean residual mean=0.000012 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.133858 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.133858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064062Jy  sigma=0.486054
! Fit after  self-cal, rms=0.064047Jy  sigma=0.486019
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.708 mas, bmaj=11.98 mas, bpa=-18.9 degrees
! Estimated noise=0.922535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00847452 Jy
! Component: 100  -  total flux cleaned = 0.0130192 Jy
! Component: 150  -  total flux cleaned = 0.0156895 Jy
! Component: 200  -  total flux cleaned = 0.0173356 Jy
! Total flux subtracted in 200 components = 0.0173356 Jy
! Clean residual min=-0.003830 max=0.004574 Jy/beam
! Clean residual mean=0.000014 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.151194 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.151194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062997Jy  sigma=0.473770
! Fit after  self-cal, rms=0.062962Jy  sigma=0.473476
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.708 x 11.98 at -18.9 degrees (North through East)
! Clean map  min=-0.0038611  max=0.14072 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.09     HN        0.98     KP        0.95     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.96     
!   PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.11     HN        1.00     KP        0.95     
!   LA        0.97     MK        1.00     NL        1.07     OV        1.00     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.12     HN        1.00     KP        0.97     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.062962Jy  sigma=0.473476
! Fit after  self-cal, rms=0.061215Jy  sigma=0.465216
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.716 mas, bmaj=12.01 mas, bpa=-18.93 degrees
! Estimated noise=0.915545 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001068 Jy
! Component: 100  -  total flux cleaned = 4.59054e-06 Jy
! Component: 150  -  total flux cleaned = 5.17357e-06 Jy
! Component: 200  -  total flux cleaned = 4.79081e-05 Jy
! Total flux subtracted in 200 components = 4.79081e-05 Jy
! Clean residual min=-0.004331 max=0.003059 Jy/beam
! Clean residual mean=0.000004 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.151241 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.151241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061176Jy  sigma=0.464854
! Fit after  self-cal, rms=0.061180Jy  sigma=0.464740
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061180Jy  sigma=0.464740
! Fit after  self-cal, rms=0.061944Jy  sigma=0.446652
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.713 mas, bmaj=12.03 mas, bpa=-19 degrees
! Estimated noise=0.918392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115264 Jy
! Component: 100  -  total flux cleaned = 0.00134355 Jy
! Component: 150  -  total flux cleaned = 0.00134546 Jy
! Component: 200  -  total flux cleaned = 0.00135976 Jy
! Total flux subtracted in 200 components = 0.00135976 Jy
! Clean residual min=-0.001802 max=0.001838 Jy/beam
! Clean residual mean=0.000002 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.152601 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.152601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061923Jy  sigma=0.446379
! Fit after  self-cal, rms=0.062010Jy  sigma=0.446241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.5472e-05 Jy
! Component: 100  -  total flux cleaned = 5.36711e-05 Jy
! Component: 150  -  total flux cleaned = 5.33789e-05 Jy
! Component: 200  -  total flux cleaned = 5.37634e-05 Jy
! Total flux subtracted in 200 components = 5.37634e-05 Jy
! Clean residual min=-0.001814 max=0.001841 Jy/beam
! Clean residual mean=0.000002 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.152655 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.152655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062005Jy  sigma=0.446211
! Fit after  self-cal, rms=0.062004Jy  sigma=0.446208
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062004Jy  sigma=0.446208
! Fit after  self-cal, rms=0.062864Jy  sigma=0.445726
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.709 mas, bmaj=12.03 mas, bpa=-19 degrees
! Estimated noise=0.918407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632579 Jy
! Component: 100  -  total flux cleaned = 0.000633309 Jy
! Component: 150  -  total flux cleaned = 0.000622661 Jy
! Component: 200  -  total flux cleaned = 0.000631976 Jy
! Total flux subtracted in 200 components = 0.000631976 Jy
! Clean residual min=-0.001542 max=0.001741 Jy/beam
! Clean residual mean=-0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.153287 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.153287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062857Jy  sigma=0.445646
! Fit after  self-cal, rms=0.062873Jy  sigma=0.445641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.4885e-05 Jy
! Component: 100  -  total flux cleaned = 2.50844e-05 Jy
! Component: 150  -  total flux cleaned = 2.51225e-05 Jy
! Component: 200  -  total flux cleaned = 1.71526e-05 Jy
! Total flux subtracted in 200 components = 1.71526e-05 Jy
! Clean residual min=-0.001537 max=0.001746 Jy/beam
! Clean residual mean=-0.000001 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.153304 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.153304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062870Jy  sigma=0.445624
! Fit after  self-cal, rms=0.062869Jy  sigma=0.445623
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062869Jy  sigma=0.445623
! Fit after  self-cal, rms=0.062910Jy  sigma=0.445596
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.8 mas, bmaj=12.88 mas, bpa=-16.39 degrees
! Estimated noise=1.06835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501152 Jy
! Component: 100  -  total flux cleaned = 0.000546394 Jy
! Component: 150  -  total flux cleaned = 0.000538977 Jy
! Component: 200  -  total flux cleaned = 0.000532551 Jy
! Total flux subtracted in 200 components = 0.000532551 Jy
! Clean residual min=-0.001859 max=0.001764 Jy/beam
! Clean residual mean=-0.000002 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.153837 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 110 components and 0.153837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062907Jy  sigma=0.445569
! Fit after  self-cal, rms=0.062907Jy  sigma=0.445567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.68074e-06 Jy
! Component: 100  -  total flux cleaned = -8.69884e-06 Jy
! Component: 150  -  total flux cleaned = -8.75045e-06 Jy
! Component: 200  -  total flux cleaned = -8.62754e-06 Jy
! Total flux subtracted in 200 components = -8.62754e-06 Jy
! Clean residual min=-0.001858 max=0.001747 Jy/beam
! Clean residual mean=-0.000002 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.153828 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 118 components and 0.153828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062906Jy  sigma=0.445573
! Fit after  self-cal, rms=0.062907Jy  sigma=0.445571
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.707 mas, bmaj=12.04 mas, bpa=-19 degrees
! Estimated noise=0.918659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.707 x 12.04 at -19 degrees (North through East)
! Clean map  min=-0.0014708  max=0.13914 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=11.65 mas, bpa=-18.91 degrees
! Estimated noise=1.20103 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108875 Jy
! Component: 100  -  total flux cleaned = 0.132752 Jy
! Component: 150  -  total flux cleaned = 0.140629 Jy
! Component: 200  -  total flux cleaned = 0.144941 Jy
! Total flux subtracted in 200 components = 0.144941 Jy
! Clean residual min=-0.002146 max=0.002205 Jy/beam
! Clean residual mean=0.000002 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.144942 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.144942 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.707 mas, bmaj=12.04 mas, bpa=-19 degrees
! Estimated noise=0.918659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377909 Jy
! Component: 100  -  total flux cleaned = 0.0059083 Jy
! Component: 150  -  total flux cleaned = 0.00722882 Jy
! Component: 200  -  total flux cleaned = 0.00807384 Jy
! Total flux subtracted in 200 components = 0.00807384 Jy
! Clean residual min=-0.001552 max=0.001781 Jy/beam
! Clean residual mean=-0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.153015 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 64 components and 0.153015 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.8 mas, bmaj=12.88 mas, bpa=-16.39 degrees
! Estimated noise=1.06835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787457 Jy
! Component: 100  -  total flux cleaned = 0.000918214 Jy
! Component: 150  -  total flux cleaned = 0.000932761 Jy
! Component: 200  -  total flux cleaned = 0.000933512 Jy
! Total flux subtracted in 200 components = 0.000933512 Jy
! Clean residual min=-0.001895 max=0.001728 Jy/beam
! Clean residual mean=-0.000002 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.153949 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.45894e-08 Jy
! Component: 100  -  total flux cleaned = -9.47944e-06 Jy
! Component: 150  -  total flux cleaned = -9.31502e-06 Jy
! Component: 200  -  total flux cleaned = -9.4263e-06 Jy
! Total flux subtracted in 200 components = -9.4263e-06 Jy
! Clean residual min=-0.001880 max=0.001732 Jy/beam
! Clean residual mean=-0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.153939 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 84 components and 0.153939 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.707 mas, bmaj=12.04 mas, bpa=-19 degrees
! Estimated noise=0.918659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195978 Jy
! Component: 100  -  total flux cleaned = -0.00015168 Jy
! Component: 150  -  total flux cleaned = -0.000112697 Jy
! Component: 200  -  total flux cleaned = -7.79394e-05 Jy
! Total flux subtracted in 200 components = -7.79394e-05 Jy
! Clean residual min=-0.001501 max=0.001768 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.153861 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 98 components and 0.153861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062906Jy  sigma=0.445597
! Fit after  self-cal, rms=0.062906Jy  sigma=0.445589
wmodel J1603+1554_S_map.mod
! Writing 98 model components to file: J1603+1554_S_map.mod
wobs   J1603+1554_S_uvs.fits
! Writing UV FITS file: J1603+1554_S_uvs.fits
wwins  J1603+1554_S_map.win
! wwins: Wrote 1 windows to J1603+1554_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000602735 Jy
! Component: 100  -  total flux cleaned = 0.000880825 Jy
! Component: 150  -  total flux cleaned = 0.00106461 Jy
! Component: 200  -  total flux cleaned = 0.00129202 Jy
! Component: 250  -  total flux cleaned = 0.00155976 Jy
! Component: 300  -  total flux cleaned = 0.00170094 Jy
! Component: 350  -  total flux cleaned = 0.00181422 Jy
! Component: 400  -  total flux cleaned = 0.00183572 Jy
! Component: 450  -  total flux cleaned = 0.00179294 Jy
! Component: 500  -  total flux cleaned = 0.00181406 Jy
! Component: 550  -  total flux cleaned = 0.00181354 Jy
! Component: 600  -  total flux cleaned = 0.00179357 Jy
! Component: 650  -  total flux cleaned = 0.00192989 Jy
! Component: 700  -  total flux cleaned = 0.00194827 Jy
! Component: 750  -  total flux cleaned = 0.00198601 Jy
! Component: 800  -  total flux cleaned = 0.00205978 Jy
! Component: 850  -  total flux cleaned = 0.00211392 Jy
! Component: 900  -  total flux cleaned = 0.00216707 Jy
! Component: 950  -  total flux cleaned = 0.00218449 Jy
! Component: 1000  -  total flux cleaned = 0.00223585 Jy
! Component: 1050  -  total flux cleaned = 0.00225281 Jy
! Component: 1100  -  total flux cleaned = 0.00225284 Jy
! Component: 1150  -  total flux cleaned = 0.0022858 Jy
! Component: 1200  -  total flux cleaned = 0.00230215 Jy
! Component: 1250  -  total flux cleaned = 0.00230268 Jy
! Component: 1300  -  total flux cleaned = 0.00233413 Jy
! Component: 1350  -  total flux cleaned = 0.00234946 Jy
! Component: 1400  -  total flux cleaned = 0.00236469 Jy
! Component: 1450  -  total flux cleaned = 0.00237982 Jy
! Component: 1500  -  total flux cleaned = 0.00240957 Jy
! Component: 1550  -  total flux cleaned = 0.00235071 Jy
! Component: 1600  -  total flux cleaned = 0.00236523 Jy
! Component: 1650  -  total flux cleaned = 0.00233625 Jy
! Component: 1700  -  total flux cleaned = 0.00235038 Jy
! Component: 1750  -  total flux cleaned = 0.00232209 Jy
! Component: 1800  -  total flux cleaned = 0.00240552 Jy
! Component: 1850  -  total flux cleaned = 0.00230918 Jy
! Component: 1900  -  total flux cleaned = 0.00230939 Jy
! Component: 1950  -  total flux cleaned = 0.00229571 Jy
! Component: 2000  -  total flux cleaned = 0.00228226 Jy
! Component: 2050  -  total flux cleaned = 0.00228229 Jy
! Component: 2100  -  total flux cleaned = 0.00226935 Jy
! Component: 2150  -  total flux cleaned = 0.00225642 Jy
! Component: 2200  -  total flux cleaned = 0.00225659 Jy
! Component: 2250  -  total flux cleaned = 0.00225643 Jy
! Component: 2300  -  total flux cleaned = 0.00226884 Jy
! Component: 2350  -  total flux cleaned = 0.00228118 Jy
! Component: 2400  -  total flux cleaned = 0.00228092 Jy
! Component: 2450  -  total flux cleaned = 0.00228099 Jy
! Component: 2500  -  total flux cleaned = 0.00229316 Jy
! Component: 2550  -  total flux cleaned = 0.00226936 Jy
! Component: 2600  -  total flux cleaned = 0.00230476 Jy
! Component: 2650  -  total flux cleaned = 0.00226951 Jy
! Component: 2700  -  total flux cleaned = 0.00226971 Jy
! Component: 2750  -  total flux cleaned = 0.00230421 Jy
! Component: 2800  -  total flux cleaned = 0.00226984 Jy
! Component: 2850  -  total flux cleaned = 0.00223583 Jy
! Component: 2900  -  total flux cleaned = 0.00226965 Jy
! Component: 2950  -  total flux cleaned = 0.00222517 Jy
! Component: 3000  -  total flux cleaned = 0.00225828 Jy
! Component: 3050  -  total flux cleaned = 0.00223649 Jy
! Component: 3100  -  total flux cleaned = 0.00220395 Jy
! Component: 3150  -  total flux cleaned = 0.00223623 Jy
! Component: 3200  -  total flux cleaned = 0.00220413 Jy
! Component: 3250  -  total flux cleaned = 0.00215127 Jy
! Component: 3300  -  total flux cleaned = 0.002078 Jy
! Component: 3350  -  total flux cleaned = 0.00209893 Jy
! Component: 3400  -  total flux cleaned = 0.00206789 Jy
! Component: 3450  -  total flux cleaned = 0.00204739 Jy
! Component: 3500  -  total flux cleaned = 0.00200688 Jy
! Component: 3550  -  total flux cleaned = 0.00200706 Jy
! Component: 3600  -  total flux cleaned = 0.00201708 Jy
! Component: 3650  -  total flux cleaned = 0.00196746 Jy
! Component: 3700  -  total flux cleaned = 0.00198707 Jy
! Component: 3750  -  total flux cleaned = 0.00196748 Jy
! Component: 3800  -  total flux cleaned = 0.00188981 Jy
! Component: 3850  -  total flux cleaned = 0.00190893 Jy
! Component: 3900  -  total flux cleaned = 0.00188977 Jy
! Component: 3950  -  total flux cleaned = 0.00182334 Jy
! Component: 4000  -  total flux cleaned = 0.00183279 Jy
! Component: 4050  -  total flux cleaned = 0.00178584 Jy
! Total flux subtracted in 4096 components = 0.00175791 Jy
! Clean residual min=-0.000607 max=0.000546 Jy/beam
! Clean residual mean=-0.000002 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.155619 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 406 components and 0.155619 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1603+1554_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.707 x 12.04 at -19 degrees (North through East)
! Clean map  min=-0.0010521  max=0.13936 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1603+1554_S_map.fits
wmodel /image_prod/ug002_uva//J1603+1554_S_map.mod
! Writing 406 model components to file: /image_prod/ug002_uva//J1603+1554_S_map.mod
wobs   /image_prod/ug002_uva//J1603+1554_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1603+1554_S_uvs.fits
wwins  /image_prod/ug002_uva//J1603+1554_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1603+1554_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139356 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180896 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389426 0.389426 0.778852 1.5577 3.11541 6.23082 12.4616 24.9233 49.8465 99.6931
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  770.364 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1603+1554_S_dfm.log closed on Thu Mar  5 02:32:26 2020