! Started logfile: /image_prod/ug002_uva//J1555+1111_X_dfm.log on Thu Mar  5 02:29:05 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1555+1111_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1555+1111_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.973148 visibilities/baseline/integration-bin.
! Found source: J1555+1111
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25224 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1555+1111_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017611Jy  sigma=9.205424
! Fit after  self-cal, rms=0.825260Jy  sigma=7.462130
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7764 mas, bmaj=2.92 mas, bpa=-19.08 degrees
! Estimated noise=0.959399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130161 Jy
! Component: 100  -  total flux cleaned = 0.164074 Jy
! Total flux subtracted in 100 components = 0.164074 Jy
! Clean residual min=-0.005846 max=0.014425 Jy/beam
! Clean residual mean=0.000014 rms=0.001506 Jy/beam
! Combined flux in latest and established models = 0.164074 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.164074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067312Jy  sigma=0.567825
! Fit after  self-cal, rms=0.067289Jy  sigma=0.567576
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154167 Jy
! Component: 100  -  total flux cleaned = 0.0240224 Jy
! Total flux subtracted in 100 components = 0.0240224 Jy
! Clean residual min=-0.004601 max=0.008040 Jy/beam
! Clean residual mean=0.000010 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.188097 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.188097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062320Jy  sigma=0.518233
! Fit after  self-cal, rms=0.062298Jy  sigma=0.517920
! Inverting map 
! Added new window around map position (1.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00743783 Jy
! Component: 100  -  total flux cleaned = 0.0121333 Jy
! Total flux subtracted in 100 components = 0.0121333 Jy
! Clean residual min=-0.004612 max=0.005963 Jy/beam
! Clean residual mean=0.000008 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.20023 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.20023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061060Jy  sigma=0.505807
! Fit after  self-cal, rms=0.060996Jy  sigma=0.505139
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9918 mas, bmaj=3.038 mas, bpa=-18.6 degrees
! Estimated noise=0.499587 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00554792 Jy
! Component: 100  -  total flux cleaned = 0.00898078 Jy
! Component: 150  -  total flux cleaned = 0.0102618 Jy
! Component: 200  -  total flux cleaned = 0.0113293 Jy
! Total flux subtracted in 200 components = 0.0113293 Jy
! Clean residual min=-0.004472 max=0.004157 Jy/beam
! Clean residual mean=0.000010 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.211559 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.211559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060431Jy  sigma=0.499373
! Fit after  self-cal, rms=0.060424Jy  sigma=0.499260
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9918 x 3.038 at -18.6 degrees (North through East)
! Clean map  min=-0.0043374  max=0.17183 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.99     KP        1.04     
!   LA        1.02     MK        1.02     NL        1.08     OV        0.93     
!   PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.99     KP        1.06     
!   LA        1.00     MK        1.00     NL        1.07     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        1.08     
!   LA        1.00     MK        1.03     NL        1.08     OV        0.92     
!   PT        0.90     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.07     
!   LA        1.01     MK        1.03     NL        1.09     OV        0.91     
!   PT        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        1.00     KP        1.06     
!   LA        1.01     MK        1.02     NL        1.07     OV        0.90     
!   PT        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.04     KP        1.07     
!   LA        1.01     MK        1.01     NL        1.08     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.06     KP        1.06     
!   LA        1.01     MK        1.03     NL        1.07     OV        0.92     
!   PT        0.89     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.01     KP        1.07     
!   LA        0.99     MK        1.01     NL        1.07     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.02     KP        1.09     
!   LA        1.01     MK        1.01     NL        1.06     OV        0.92     
!   PT        0.90     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.02     KP        1.04     
!   LA        1.01     MK        1.03     NL        1.08     OV        0.93     
!   PT        0.90     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.04     KP        1.07     
!   LA        0.99     MK        1.01     NL        1.06     OV        0.93     
!   PT        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.02     KP        1.11     
!   LA        0.99     MK        1.02     NL        1.08     OV        0.93     
!   PT        0.90     
! 
! 
! Fit before self-cal, rms=0.060424Jy  sigma=0.499260
! Fit after  self-cal, rms=0.058603Jy  sigma=0.483275
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=3.035 mas, bpa=-18.49 degrees
! Estimated noise=0.499058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00260409 Jy
! Component: 100  -  total flux cleaned = -0.00315177 Jy
! Component: 150  -  total flux cleaned = -0.00322916 Jy
! Component: 200  -  total flux cleaned = -0.00335468 Jy
! Total flux subtracted in 200 components = -0.00335468 Jy
! Clean residual min=-0.001939 max=0.001860 Jy/beam
! Clean residual mean=0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.208205 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 70 components and 0.208205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058493Jy  sigma=0.481982
! Fit after  self-cal, rms=0.058510Jy  sigma=0.481858
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058510Jy  sigma=0.481858
! Fit after  self-cal, rms=0.059474Jy  sigma=0.478766
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=3.035 mas, bpa=-18.43 degrees
! Estimated noise=0.498788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197422 Jy
! Component: 100  -  total flux cleaned = -0.00224788 Jy
! Component: 150  -  total flux cleaned = -0.00222094 Jy
! Component: 200  -  total flux cleaned = -0.00217183 Jy
! Total flux subtracted in 200 components = -0.00217183 Jy
! Clean residual min=-0.001398 max=0.001199 Jy/beam
! Clean residual mean=0.000003 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.206033 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.206033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059405Jy  sigma=0.478102
! Fit after  self-cal, rms=0.059422Jy  sigma=0.478068
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104994 Jy
! Component: 100  -  total flux cleaned = -8.63384e-05 Jy
! Component: 150  -  total flux cleaned = -6.83044e-05 Jy
! Component: 200  -  total flux cleaned = -6.76544e-05 Jy
! Total flux subtracted in 200 components = -6.76544e-05 Jy
! Clean residual min=-0.001429 max=0.001134 Jy/beam
! Clean residual mean=0.000003 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.205965 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 0.205965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059411Jy  sigma=0.477962
! Fit after  self-cal, rms=0.059409Jy  sigma=0.477955
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059409Jy  sigma=0.477955
! Fit after  self-cal, rms=0.059732Jy  sigma=0.477659
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=3.031 mas, bpa=-18.41 degrees
! Estimated noise=0.498961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123592 Jy
! Component: 100  -  total flux cleaned = -0.00140561 Jy
! Component: 150  -  total flux cleaned = -0.00142627 Jy
! Component: 200  -  total flux cleaned = -0.00142573 Jy
! Total flux subtracted in 200 components = -0.00142573 Jy
! Clean residual min=-0.001263 max=0.001084 Jy/beam
! Clean residual mean=0.000002 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.20454 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 93 components and 0.20454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059702Jy  sigma=0.477374
! Fit after  self-cal, rms=0.059705Jy  sigma=0.477361
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109916 Jy
! Component: 100  -  total flux cleaned = -7.96708e-05 Jy
! Component: 150  -  total flux cleaned = -5.2493e-05 Jy
! Component: 200  -  total flux cleaned = -4.01101e-05 Jy
! Total flux subtracted in 200 components = -4.01101e-05 Jy
! Clean residual min=-0.001296 max=0.001068 Jy/beam
! Clean residual mean=0.000002 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.204499 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.204499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059699Jy  sigma=0.477300
! Fit after  self-cal, rms=0.059698Jy  sigma=0.477297
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059698Jy  sigma=0.477297
! Fit after  self-cal, rms=0.059880Jy  sigma=0.477167
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=3.271 mas, bpa=-9.623 degrees
! Estimated noise=0.591329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000770551 Jy
! Component: 100  -  total flux cleaned = -0.000854204 Jy
! Component: 150  -  total flux cleaned = -0.000853646 Jy
! Component: 200  -  total flux cleaned = -0.000833722 Jy
! Total flux subtracted in 200 components = -0.000833722 Jy
! Clean residual min=-0.001146 max=0.001307 Jy/beam
! Clean residual mean=0.000003 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.203666 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 114 components and 0.203666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059872Jy  sigma=0.477075
! Fit after  self-cal, rms=0.059875Jy  sigma=0.477069
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102476 Jy
! Component: 100  -  total flux cleaned = -9.47357e-05 Jy
! Component: 150  -  total flux cleaned = -8.79347e-05 Jy
! Component: 200  -  total flux cleaned = -8.17117e-05 Jy
! Total flux subtracted in 200 components = -8.17117e-05 Jy
! Clean residual min=-0.001121 max=0.001241 Jy/beam
! Clean residual mean=0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.203584 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 121 components and 0.203584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059872Jy  sigma=0.477049
! Fit after  self-cal, rms=0.059872Jy  sigma=0.477049
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=3.028 mas, bpa=-18.39 degrees
! Estimated noise=0.499098 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 3.028 at -18.39 degrees (North through East)
! Clean map  min=-0.001153  max=0.1726 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7827 mas, bmaj=2.906 mas, bpa=-18.97 degrees
! Estimated noise=0.96571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130915 Jy
! Component: 100  -  total flux cleaned = 0.164671 Jy
! Component: 150  -  total flux cleaned = 0.179732 Jy
! Component: 200  -  total flux cleaned = 0.187212 Jy
! Total flux subtracted in 200 components = 0.187212 Jy
! Clean residual min=-0.002235 max=0.003667 Jy/beam
! Clean residual mean=0.000004 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.187212 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.187212 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=3.028 mas, bpa=-18.39 degrees
! Estimated noise=0.499098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613063 Jy
! Component: 100  -  total flux cleaned = 0.00937236 Jy
! Component: 150  -  total flux cleaned = 0.0113106 Jy
! Component: 200  -  total flux cleaned = 0.0126397 Jy
! Total flux subtracted in 200 components = 0.0126397 Jy
! Clean residual min=-0.001230 max=0.001238 Jy/beam
! Clean residual mean=0.000003 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.199852 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 54 components and 0.199852 Jy
! Inverting map 
! Added new window around map position (-39, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111259 Jy
! Component: 100  -  total flux cleaned = 0.00164417 Jy
! Component: 150  -  total flux cleaned = 0.00204437 Jy
! Component: 200  -  total flux cleaned = 0.00229947 Jy
! Total flux subtracted in 200 components = 0.00229947 Jy
! Clean residual min=-0.001185 max=0.000942 Jy/beam
! Clean residual mean=0.000002 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.202151 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 76 components and 0.202151 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=3.271 mas, bpa=-9.623 degrees
! Estimated noise=0.591329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598521 Jy
! Component: 100  -  total flux cleaned = 0.000873215 Jy
! Component: 150  -  total flux cleaned = 0.00104463 Jy
! Component: 200  -  total flux cleaned = 0.00121525 Jy
! Total flux subtracted in 200 components = 0.00121525 Jy
! Clean residual min=-0.001053 max=0.001149 Jy/beam
! Clean residual mean=0.000003 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.203366 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118319 Jy
! Component: 100  -  total flux cleaned = 0.000209796 Jy
! Component: 150  -  total flux cleaned = 0.000306687 Jy
! Component: 200  -  total flux cleaned = 0.000381887 Jy
! Total flux subtracted in 200 components = 0.000381887 Jy
! Clean residual min=-0.001021 max=0.001087 Jy/beam
! Clean residual mean=0.000003 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.203748 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 110 components and 0.203748 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=3.028 mas, bpa=-18.39 degrees
! Estimated noise=0.499098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144765 Jy
! Component: 100  -  total flux cleaned = -6.71356e-05 Jy
! Component: 150  -  total flux cleaned = 2.5562e-06 Jy
! Component: 200  -  total flux cleaned = 4.09707e-05 Jy
! Total flux subtracted in 200 components = 4.09707e-05 Jy
! Clean residual min=-0.001120 max=0.000912 Jy/beam
! Clean residual mean=0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.203789 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 128 components and 0.203789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059823Jy  sigma=0.476798
! Fit after  self-cal, rms=0.059815Jy  sigma=0.476762
wmodel J1555+1111_X_map.mod
! Writing 128 model components to file: J1555+1111_X_map.mod
wobs   J1555+1111_X_uvs.fits
! Writing UV FITS file: J1555+1111_X_uvs.fits
wwins  J1555+1111_X_map.win
! wwins: Wrote 3 windows to J1555+1111_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000349815 Jy
! Component: 100  -  total flux cleaned = -0.000401219 Jy
! Component: 150  -  total flux cleaned = -0.000465698 Jy
! Component: 200  -  total flux cleaned = -0.000496288 Jy
! Component: 250  -  total flux cleaned = -0.000540993 Jy
! Component: 300  -  total flux cleaned = -0.000527103 Jy
! Component: 350  -  total flux cleaned = -0.000597579 Jy
! Component: 400  -  total flux cleaned = -0.000583605 Jy
! Component: 450  -  total flux cleaned = -0.000583704 Jy
! Component: 500  -  total flux cleaned = -0.000583594 Jy
! Component: 550  -  total flux cleaned = -0.000570762 Jy
! Component: 600  -  total flux cleaned = -0.000545096 Jy
! Component: 650  -  total flux cleaned = -0.000507728 Jy
! Component: 700  -  total flux cleaned = -0.000507895 Jy
! Component: 750  -  total flux cleaned = -0.000495888 Jy
! Component: 800  -  total flux cleaned = -0.000483966 Jy
! Component: 850  -  total flux cleaned = -0.000472354 Jy
! Component: 900  -  total flux cleaned = -0.000449363 Jy
! Component: 950  -  total flux cleaned = -0.000380771 Jy
! Component: 1000  -  total flux cleaned = -0.000380971 Jy
! Component: 1050  -  total flux cleaned = -0.000347428 Jy
! Component: 1100  -  total flux cleaned = -0.000358608 Jy
! Component: 1150  -  total flux cleaned = -0.000314897 Jy
! Component: 1200  -  total flux cleaned = -0.000260802 Jy
! Component: 1250  -  total flux cleaned = -0.000207284 Jy
! Component: 1300  -  total flux cleaned = -0.000154516 Jy
! Component: 1350  -  total flux cleaned = -3.96224e-05 Jy
! Component: 1400  -  total flux cleaned = -1.90395e-05 Jy
! Component: 1450  -  total flux cleaned = 3.20314e-05 Jy
! Component: 1500  -  total flux cleaned = 5.23861e-05 Jy
! Component: 1550  -  total flux cleaned = 0.000163072 Jy
! Component: 1600  -  total flux cleaned = 0.000232744 Jy
! Component: 1650  -  total flux cleaned = 0.000271984 Jy
! Component: 1700  -  total flux cleaned = 0.000340343 Jy
! Component: 1750  -  total flux cleaned = 0.000437017 Jy
! Component: 1800  -  total flux cleaned = 0.000465714 Jy
! Component: 1850  -  total flux cleaned = 0.000532111 Jy
! Component: 1900  -  total flux cleaned = 0.000607413 Jy
! Component: 1950  -  total flux cleaned = 0.000653986 Jy
! Component: 2000  -  total flux cleaned = 0.000718666 Jy
! Component: 2050  -  total flux cleaned = 0.000791897 Jy
! Component: 2100  -  total flux cleaned = 0.000846471 Jy
! Component: 2150  -  total flux cleaned = 0.000936582 Jy
! Component: 2200  -  total flux cleaned = 0.000981455 Jy
! Component: 2250  -  total flux cleaned = 0.00103462 Jy
! Component: 2300  -  total flux cleaned = 0.00107878 Jy
! Component: 2350  -  total flux cleaned = 0.00119228 Jy
! Component: 2400  -  total flux cleaned = 0.00127023 Jy
! Component: 2450  -  total flux cleaned = 0.00132189 Jy
! Component: 2500  -  total flux cleaned = 0.00140721 Jy
! Component: 2550  -  total flux cleaned = 0.00144101 Jy
! Component: 2600  -  total flux cleaned = 0.00148304 Jy
! Component: 2650  -  total flux cleaned = 0.0015834 Jy
! Component: 2700  -  total flux cleaned = 0.0016083 Jy
! Component: 2750  -  total flux cleaned = 0.00169063 Jy
! Component: 2800  -  total flux cleaned = 0.00173962 Jy
! Component: 2850  -  total flux cleaned = 0.00178838 Jy
! Component: 2900  -  total flux cleaned = 0.00186909 Jy
! Component: 2950  -  total flux cleaned = 0.001845 Jy
! Component: 3000  -  total flux cleaned = 0.00192467 Jy
! Component: 3050  -  total flux cleaned = 0.00197993 Jy
! Component: 3100  -  total flux cleaned = 0.00200354 Jy
! Component: 3150  -  total flux cleaned = 0.00205043 Jy
! Component: 3200  -  total flux cleaned = 0.00208921 Jy
! Component: 3250  -  total flux cleaned = 0.0021432 Jy
! Component: 3300  -  total flux cleaned = 0.00220449 Jy
! Component: 3350  -  total flux cleaned = 0.00225017 Jy
! Component: 3400  -  total flux cleaned = 0.00225778 Jy
! Component: 3450  -  total flux cleaned = 0.00230296 Jy
! Component: 3500  -  total flux cleaned = 0.00234778 Jy
! Component: 3550  -  total flux cleaned = 0.00235529 Jy
! Component: 3600  -  total flux cleaned = 0.00244408 Jy
! Component: 3650  -  total flux cleaned = 0.00247348 Jy
! Component: 3700  -  total flux cleaned = 0.00251739 Jy
! Component: 3750  -  total flux cleaned = 0.00256832 Jy
! Component: 3800  -  total flux cleaned = 0.00262609 Jy
! Component: 3850  -  total flux cleaned = 0.00259735 Jy
! Component: 3900  -  total flux cleaned = 0.00264745 Jy
! Component: 3950  -  total flux cleaned = 0.00269727 Jy
! Component: 4000  -  total flux cleaned = 0.00270434 Jy
! Component: 4050  -  total flux cleaned = 0.00274658 Jy
! Total flux subtracted in 4096 components = 0.00278153 Jy
! Clean residual min=-0.000411 max=0.000452 Jy/beam
! Clean residual mean=0.000001 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.206571 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 440 components and 0.206571 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1555+1111_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 3.028 at -18.39 degrees (North through East)
! Clean map  min=-0.00089266  max=0.1734 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1555+1111_X_map.fits
wmodel /image_prod/ug002_uva//J1555+1111_X_map.mod
! Writing 440 model components to file: /image_prod/ug002_uva//J1555+1111_X_map.mod
wobs   /image_prod/ug002_uva//J1555+1111_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1555+1111_X_uvs.fits
wwins  /image_prod/ug002_uva//J1555+1111_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1555+1111_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.173401 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000130235 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.225318 0.225318 0.450636 0.901271 1.80254 3.60508 7.21017 14.4203 28.8407 57.6814
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.173 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1331.45 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1555+1111_X_dfm.log closed on Thu Mar  5 02:29:09 2020