! Started logfile: /image_prod/ug002_uva//J1553+1256_X_dfm.log on Thu Mar 5 02:28:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1553+1256_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1553+1256_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.980247 visibilities/baseline/integration-bin. ! Found source: J1553+1256 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 38112 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1553+1256_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.042117Jy sigma=9.082627 ! Fit after self-cal, rms=0.773118Jy sigma=6.810792 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7466 mas, bmaj=2.809 mas, bpa=-19.93 degrees ! Estimated noise=0.904462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159635 Jy ! Component: 100 - total flux cleaned = 0.225971 Jy ! Total flux subtracted in 100 components = 0.225971 Jy ! Clean residual min=-0.017471 max=0.038671 Jy/beam ! Clean residual mean=0.000072 rms=0.004375 Jy/beam ! Combined flux in latest and established models = 0.225971 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.225971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142498Jy sigma=1.166926 ! Fit after self-cal, rms=0.142100Jy sigma=1.163113 ! Inverting map ! Added new window around map position (-0.4, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440847 Jy ! Component: 100 - total flux cleaned = 0.0746326 Jy ! Total flux subtracted in 100 components = 0.0746326 Jy ! Clean residual min=-0.011586 max=0.019344 Jy/beam ! Clean residual mean=0.000054 rms=0.003240 Jy/beam ! Combined flux in latest and established models = 0.300603 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.300603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113846Jy sigma=0.929632 ! Fit after self-cal, rms=0.113477Jy sigma=0.923723 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263185 Jy ! Component: 100 - total flux cleaned = 0.0467375 Jy ! Total flux subtracted in 100 components = 0.0467375 Jy ! Clean residual min=-0.009163 max=0.019038 Jy/beam ! Clean residual mean=0.000043 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 0.347341 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.347341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099538Jy sigma=0.810698 ! Fit after self-cal, rms=0.099451Jy sigma=0.808271 ! Inverting map ! Added new window around map position (3, 8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216016 Jy ! Component: 100 - total flux cleaned = 0.0383706 Jy ! Total flux subtracted in 100 components = 0.0383706 Jy ! Clean residual min=-0.007905 max=0.012094 Jy/beam ! Clean residual mean=0.000039 rms=0.002188 Jy/beam ! Combined flux in latest and established models = 0.385711 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 0.385711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089350Jy sigma=0.723408 ! Fit after self-cal, rms=0.089212Jy sigma=0.721639 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9788 mas, bmaj=2.929 mas, bpa=-18.88 degrees ! Estimated noise=0.420894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281198 Jy ! Component: 100 - total flux cleaned = 0.0497023 Jy ! Component: 150 - total flux cleaned = 0.0671688 Jy ! Component: 200 - total flux cleaned = 0.0816252 Jy ! Total flux subtracted in 200 components = 0.0816252 Jy ! Clean residual min=-0.009010 max=0.013520 Jy/beam ! Clean residual mean=0.000043 rms=0.002681 Jy/beam ! Combined flux in latest and established models = 0.467336 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 108 components and 0.467337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073622Jy sigma=0.597178 ! Fit after self-cal, rms=0.073283Jy sigma=0.592940 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9788 x 2.929 at -18.88 degrees (North through East) ! Clean map min=-0.008814 max=0.22735 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.02 KP 1.03 ! LA 0.97 MK 1.06 NL 1.12 OV 0.91 ! PT 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.01 KP 1.03 ! LA 0.96 MK 1.05 NL 1.11 OV 0.92 ! PT 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.01 KP 1.03 ! LA 0.97 MK 1.05 NL 1.10 OV 0.91 ! PT 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.04 ! LA 0.97 MK 1.05 NL 1.11 OV 0.91 ! PT 0.83 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 1.03 ! LA 0.96 MK 1.05 NL 1.12 OV 0.91 ! PT 0.82 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.02 KP 1.02 ! LA 0.96 MK 1.06 NL 1.13 OV 0.91 ! PT 0.84 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.03 KP 1.04 ! LA 0.97 MK 1.03 NL 1.12 OV 0.91 ! PT 0.83 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.00 KP 1.03 ! LA 0.96 MK 1.04 NL 1.12 OV 0.91 ! PT 0.83 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.03 KP 1.04 ! LA 0.96 MK 1.04 NL 1.11 OV 0.91 ! PT 0.83 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.99 KP 1.03 ! LA 0.98 MK 1.03 NL 1.10 OV 0.91 ! PT 0.84 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00 KP 1.04 ! LA 0.97 MK 1.02 NL 1.12 OV 0.91 ! PT 0.84 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.04 ! LA 0.96 MK 1.05 NL 1.12 OV 0.92 ! PT 0.83 ! ! ! Fit before self-cal, rms=0.073283Jy sigma=0.592940 ! Fit after self-cal, rms=0.061248Jy sigma=0.512437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=2.957 mas, bpa=-18.68 degrees ! Estimated noise=0.411887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107254 Jy ! Component: 100 - total flux cleaned = 0.0174431 Jy ! Component: 150 - total flux cleaned = 0.0221367 Jy ! Component: 200 - total flux cleaned = 0.025173 Jy ! Total flux subtracted in 200 components = 0.025173 Jy ! Clean residual min=-0.004040 max=0.005914 Jy/beam ! Clean residual mean=0.000010 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.49251 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 137 components and 0.492509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058960Jy sigma=0.490741 ! Fit after self-cal, rms=0.058856Jy sigma=0.489392 ! Inverting map ! Added new window around map position (0.4, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00585288 Jy ! Component: 100 - total flux cleaned = 0.00872698 Jy ! Component: 150 - total flux cleaned = 0.0111989 Jy ! Component: 200 - total flux cleaned = 0.0131631 Jy ! Total flux subtracted in 200 components = 0.0131631 Jy ! Clean residual min=-0.003536 max=0.004786 Jy/beam ! Clean residual mean=0.000005 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.505673 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 166 components and 0.505672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058067Jy sigma=0.482517 ! Fit after self-cal, rms=0.058027Jy sigma=0.482047 ! Inverting map ! Added new window around map position (5, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419122 Jy ! Component: 100 - total flux cleaned = 0.0063631 Jy ! Component: 150 - total flux cleaned = 0.00828672 Jy ! Component: 200 - total flux cleaned = 0.00997943 Jy ! Total flux subtracted in 200 components = 0.00997943 Jy ! Clean residual min=-0.003210 max=0.002695 Jy/beam ! Clean residual mean=0.000003 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.515652 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 194 components and 0.515652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057636Jy sigma=0.478304 ! Fit after self-cal, rms=0.057614Jy sigma=0.478091 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057614Jy sigma=0.478091 ! Fit after self-cal, rms=0.058379Jy sigma=0.474303 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=2.956 mas, bpa=-18.51 degrees ! Estimated noise=0.413698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104848 Jy ! Component: 100 - total flux cleaned = 0.00235732 Jy ! Component: 150 - total flux cleaned = 0.00350122 Jy ! Component: 200 - total flux cleaned = 0.00451616 Jy ! Total flux subtracted in 200 components = 0.00451616 Jy ! Clean residual min=-0.002078 max=0.002248 Jy/beam ! Clean residual mean=0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.520168 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 214 components and 0.520168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058186Jy sigma=0.472406 ! Fit after self-cal, rms=0.058182Jy sigma=0.472263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736624 Jy ! Component: 100 - total flux cleaned = 0.0015544 Jy ! Component: 150 - total flux cleaned = 0.00207914 Jy ! Component: 200 - total flux cleaned = 0.00251577 Jy ! Total flux subtracted in 200 components = 0.00251577 Jy ! Clean residual min=-0.002060 max=0.002040 Jy/beam ! Clean residual mean=0.000003 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.522684 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 230 components and 0.522684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058082Jy sigma=0.471374 ! Fit after self-cal, rms=0.058074Jy sigma=0.471303 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058074Jy sigma=0.471303 ! Fit after self-cal, rms=0.058216Jy sigma=0.471106 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.006 mas, bmaj=2.953 mas, bpa=-18.5 degrees ! Estimated noise=0.414003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271584 Jy ! Component: 100 - total flux cleaned = 0.0009051 Jy ! Component: 150 - total flux cleaned = 0.00124205 Jy ! Component: 200 - total flux cleaned = 0.0015567 Jy ! Total flux subtracted in 200 components = 0.0015567 Jy ! Clean residual min=-0.001704 max=0.001955 Jy/beam ! Clean residual mean=0.000004 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.524241 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 241 components and 0.524241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058131Jy sigma=0.470325 ! Fit after self-cal, rms=0.058128Jy sigma=0.470276 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192946 Jy ! Component: 100 - total flux cleaned = -0.000250753 Jy ! Component: 150 - total flux cleaned = -0.000204995 Jy ! Component: 200 - total flux cleaned = -0.000119632 Jy ! Total flux subtracted in 200 components = -0.000119632 Jy ! Clean residual min=-0.001493 max=0.001756 Jy/beam ! Clean residual mean=0.000004 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.524121 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 261 components and 0.524121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058025Jy sigma=0.469369 ! Fit after self-cal, rms=0.058019Jy sigma=0.469322 ! Inverting map ! Added new window around map position (-2.2, -40.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105093 Jy ! Component: 100 - total flux cleaned = 0.00109269 Jy ! Component: 150 - total flux cleaned = 0.0012118 Jy ! Component: 200 - total flux cleaned = 0.00128622 Jy ! Total flux subtracted in 200 components = 0.00128622 Jy ! Clean residual min=-0.001425 max=0.001453 Jy/beam ! Clean residual mean=0.000003 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.525407 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 278 components and 0.525407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057950Jy sigma=0.468732 ! Fit after self-cal, rms=0.057949Jy sigma=0.468712 ! Inverting map ! Added new window around map position (11.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840983 Jy ! Component: 100 - total flux cleaned = 0.000766635 Jy ! Component: 150 - total flux cleaned = 0.000661117 Jy ! Component: 200 - total flux cleaned = 0.000660378 Jy ! Total flux subtracted in 200 components = 0.000660378 Jy ! Clean residual min=-0.001308 max=0.001356 Jy/beam ! Clean residual mean=0.000003 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.526068 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 289 components and 0.526067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057897Jy sigma=0.468274 ! Fit after self-cal, rms=0.057895Jy sigma=0.468258 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057895Jy sigma=0.468258 ! Fit after self-cal, rms=0.057890Jy sigma=0.468183 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.245 mas, bmaj=3.174 mas, bpa=-11.04 degrees ! Estimated noise=0.492183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333054 Jy ! Component: 100 - total flux cleaned = 0.00063909 Jy ! Component: 150 - total flux cleaned = 0.000903594 Jy ! Component: 200 - total flux cleaned = 0.00102167 Jy ! Total flux subtracted in 200 components = 0.00102167 Jy ! Clean residual min=-0.001206 max=0.001461 Jy/beam ! Clean residual mean=0.000005 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.527089 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 320 components and 0.527089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057870Jy sigma=0.468007 ! Fit after self-cal, rms=0.057868Jy sigma=0.467989 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003231 Jy ! Component: 100 - total flux cleaned = 0.000520827 Jy ! Component: 150 - total flux cleaned = 0.00059909 Jy ! Component: 200 - total flux cleaned = 0.00061744 Jy ! Total flux subtracted in 200 components = 0.00061744 Jy ! Clean residual min=-0.001162 max=0.001369 Jy/beam ! Clean residual mean=0.000004 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.527707 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 341 components and 0.527707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057856Jy sigma=0.467888 ! Fit after self-cal, rms=0.057855Jy sigma=0.467880 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=2.949 mas, bpa=-18.48 degrees ! Estimated noise=0.414149 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.007 x 2.949 at -18.48 degrees (North through East) ! Clean map min=-0.0013408 max=0.22264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7641 mas, bmaj=2.817 mas, bpa=-19.64 degrees ! Estimated noise=0.912476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158322 Jy ! Component: 100 - total flux cleaned = 0.227594 Jy ! Component: 150 - total flux cleaned = 0.272149 Jy ! Component: 200 - total flux cleaned = 0.304801 Jy ! Total flux subtracted in 200 components = 0.304801 Jy ! Clean residual min=-0.010473 max=0.019242 Jy/beam ! Clean residual mean=0.000040 rms=0.002840 Jy/beam ! Combined flux in latest and established models = 0.304801 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.304801 Jy ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=2.949 mas, bpa=-18.48 degrees ! Estimated noise=0.414149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421829 Jy ! Component: 100 - total flux cleaned = 0.0729718 Jy ! Component: 150 - total flux cleaned = 0.0963653 Jy ! Component: 200 - total flux cleaned = 0.11467 Jy ! Total flux subtracted in 200 components = 0.11467 Jy ! Clean residual min=-0.005799 max=0.010840 Jy/beam ! Clean residual mean=0.000034 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.419471 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 69 components and 0.419471 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146056 Jy ! Component: 100 - total flux cleaned = 0.0265229 Jy ! Component: 150 - total flux cleaned = 0.0364222 Jy ! Component: 200 - total flux cleaned = 0.0447689 Jy ! Total flux subtracted in 200 components = 0.0447689 Jy ! Clean residual min=-0.003670 max=0.005123 Jy/beam ! Clean residual mean=0.000020 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.46424 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 113 components and 0.46424 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709538 Jy ! Component: 100 - total flux cleaned = 0.0131578 Jy ! Component: 150 - total flux cleaned = 0.0183763 Jy ! Component: 200 - total flux cleaned = 0.0229041 Jy ! Total flux subtracted in 200 components = 0.0229041 Jy ! Clean residual min=-0.002706 max=0.002992 Jy/beam ! Clean residual mean=0.000013 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.487144 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 157 components and 0.487144 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.245 mas, bmaj=3.174 mas, bpa=-11.04 degrees ! Estimated noise=0.492183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638095 Jy ! Component: 100 - total flux cleaned = 0.0114107 Jy ! Component: 150 - total flux cleaned = 0.0152396 Jy ! Component: 200 - total flux cleaned = 0.0183367 Jy ! Total flux subtracted in 200 components = 0.0183367 Jy ! Clean residual min=-0.002409 max=0.002358 Jy/beam ! Clean residual mean=0.000015 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.505481 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265521 Jy ! Component: 100 - total flux cleaned = 0.00495196 Jy ! Component: 150 - total flux cleaned = 0.00695732 Jy ! Component: 200 - total flux cleaned = 0.00872529 Jy ! Total flux subtracted in 200 components = 0.00872529 Jy ! Clean residual min=-0.001792 max=0.001776 Jy/beam ! Clean residual mean=0.000010 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.514206 Jy ! Adding 159 model components to the UV plane model. ! The established model now contains 295 components and 0.514206 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=2.949 mas, bpa=-18.48 degrees ! Estimated noise=0.414149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149427 Jy ! Component: 100 - total flux cleaned = 0.00267978 Jy ! Component: 150 - total flux cleaned = 0.00367784 Jy ! Component: 200 - total flux cleaned = 0.00447471 Jy ! Total flux subtracted in 200 components = 0.00447471 Jy ! Clean residual min=-0.001261 max=0.001617 Jy/beam ! Clean residual mean=0.000004 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.518681 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 322 components and 0.518681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057935Jy sigma=0.468552 ! Fit after self-cal, rms=0.057905Jy sigma=0.468263 wmodel J1553+1256_X_map.mod ! Writing 322 model components to file: J1553+1256_X_map.mod wobs J1553+1256_X_uvs.fits ! Writing UV FITS file: J1553+1256_X_uvs.fits wwins J1553+1256_X_map.win ! wwins: Wrote 8 windows to J1553+1256_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475725 Jy ! Component: 100 - total flux cleaned = 0.000678911 Jy ! Component: 150 - total flux cleaned = 0.00089365 Jy ! Component: 200 - total flux cleaned = 0.00101763 Jy ! Component: 250 - total flux cleaned = 0.00119798 Jy ! Component: 300 - total flux cleaned = 0.00141238 Jy ! Component: 350 - total flux cleaned = 0.00163985 Jy ! Component: 400 - total flux cleaned = 0.00184288 Jy ! Component: 450 - total flux cleaned = 0.00198724 Jy ! Component: 500 - total flux cleaned = 0.0021106 Jy ! Component: 550 - total flux cleaned = 0.00221385 Jy ! Component: 600 - total flux cleaned = 0.00231484 Jy ! Component: 650 - total flux cleaned = 0.00238106 Jy ! Component: 700 - total flux cleaned = 0.00241359 Jy ! Component: 750 - total flux cleaned = 0.0024456 Jy ! Component: 800 - total flux cleaned = 0.0024928 Jy ! Component: 850 - total flux cleaned = 0.00250836 Jy ! Component: 900 - total flux cleaned = 0.00253883 Jy ! Component: 950 - total flux cleaned = 0.00258373 Jy ! Component: 1000 - total flux cleaned = 0.00258364 Jy ! Component: 1050 - total flux cleaned = 0.00252583 Jy ! Component: 1100 - total flux cleaned = 0.00258316 Jy ! Component: 1150 - total flux cleaned = 0.0026115 Jy ! Component: 1200 - total flux cleaned = 0.00261153 Jy ! Component: 1250 - total flux cleaned = 0.00263905 Jy ! Component: 1300 - total flux cleaned = 0.00262543 Jy ! Component: 1350 - total flux cleaned = 0.00262522 Jy ! Component: 1400 - total flux cleaned = 0.00263866 Jy ! Component: 1450 - total flux cleaned = 0.00267832 Jy ! Component: 1500 - total flux cleaned = 0.00270437 Jy ! Component: 1550 - total flux cleaned = 0.00275553 Jy ! Component: 1600 - total flux cleaned = 0.0027553 Jy ! Component: 1650 - total flux cleaned = 0.00278026 Jy ! Component: 1700 - total flux cleaned = 0.00276789 Jy ! Component: 1750 - total flux cleaned = 0.00276827 Jy ! Component: 1800 - total flux cleaned = 0.00281663 Jy ! Component: 1850 - total flux cleaned = 0.00284042 Jy ! Component: 1900 - total flux cleaned = 0.00279318 Jy ! Component: 1950 - total flux cleaned = 0.00279341 Jy ! Component: 2000 - total flux cleaned = 0.00279343 Jy ! Component: 2050 - total flux cleaned = 0.00283926 Jy ! Component: 2100 - total flux cleaned = 0.00280541 Jy ! Component: 2150 - total flux cleaned = 0.00279419 Jy ! Component: 2200 - total flux cleaned = 0.00278313 Jy ! Component: 2250 - total flux cleaned = 0.00277219 Jy ! Component: 2300 - total flux cleaned = 0.00282649 Jy ! Component: 2350 - total flux cleaned = 0.00279433 Jy ! Component: 2400 - total flux cleaned = 0.00285838 Jy ! Component: 2450 - total flux cleaned = 0.00289008 Jy ! Component: 2500 - total flux cleaned = 0.00285869 Jy ! Component: 2550 - total flux cleaned = 0.0028895 Jy ! Component: 2600 - total flux cleaned = 0.00286901 Jy ! Component: 2650 - total flux cleaned = 0.00285883 Jy ! Component: 2700 - total flux cleaned = 0.00288905 Jy ! Component: 2750 - total flux cleaned = 0.00287912 Jy ! Component: 2800 - total flux cleaned = 0.00290872 Jy ! Component: 2850 - total flux cleaned = 0.00294791 Jy ! Component: 2900 - total flux cleaned = 0.002938 Jy ! Component: 2950 - total flux cleaned = 0.00294761 Jy ! Component: 3000 - total flux cleaned = 0.00294761 Jy ! Component: 3050 - total flux cleaned = 0.00298529 Jy ! Component: 3100 - total flux cleaned = 0.00297592 Jy ! Component: 3150 - total flux cleaned = 0.00301303 Jy ! Component: 3200 - total flux cleaned = 0.00299454 Jy ! Component: 3250 - total flux cleaned = 0.00304939 Jy ! Component: 3300 - total flux cleaned = 0.00305841 Jy ! Component: 3350 - total flux cleaned = 0.00305844 Jy ! Component: 3400 - total flux cleaned = 0.00305849 Jy ! Component: 3450 - total flux cleaned = 0.00306731 Jy ! Component: 3500 - total flux cleaned = 0.0030849 Jy ! Component: 3550 - total flux cleaned = 0.00305871 Jy ! Component: 3600 - total flux cleaned = 0.00311073 Jy ! Component: 3650 - total flux cleaned = 0.00313654 Jy ! Component: 3700 - total flux cleaned = 0.00312797 Jy ! Component: 3750 - total flux cleaned = 0.00313639 Jy ! Component: 3800 - total flux cleaned = 0.00314472 Jy ! Component: 3850 - total flux cleaned = 0.0030863 Jy ! Component: 3900 - total flux cleaned = 0.00310289 Jy ! Component: 3950 - total flux cleaned = 0.00311127 Jy ! Component: 4000 - total flux cleaned = 0.00310311 Jy ! Component: 4050 - total flux cleaned = 0.00314368 Jy ! Total flux subtracted in 4096 components = 0.00312751 Jy ! Clean residual min=-0.000497 max=0.000476 Jy/beam ! Clean residual mean=0.000002 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.521809 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 649 components and 0.521809 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1553+1256_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.007 x 2.949 at -18.48 degrees (North through East) ! Clean map min=-0.001248 max=0.22092 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1553+1256_X_map.fits wmodel /image_prod/ug002_uva//J1553+1256_X_map.mod ! Writing 649 model components to file: /image_prod/ug002_uva//J1553+1256_X_map.mod wobs /image_prod/ug002_uva//J1553+1256_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1553+1256_X_uvs.fits wwins /image_prod/ug002_uva//J1553+1256_X_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1553+1256_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.220923 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000147575 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.200398 0.200398 0.400795 0.80159 1.60318 3.20636 6.41272 12.8254 25.6509 51.3018 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.22 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1497.02 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1553+1256_X_dfm.log closed on Thu Mar 5 02:28:28 2020