! Started logfile: /image_prod/ug002_uva//J1549-1639_S_a_dfm.log on Thu Mar  5 02:26:36 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1549-1639_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1549-1639_S_a_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1549-1639
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8100 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1549-1639_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.017156Jy  sigma=7.124193
! Fit after  self-cal, rms=0.875601Jy  sigma=6.051220
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.767 mas, bmaj=6.702 mas, bpa=-2.995 degrees
! Estimated noise=1.93722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0995021 Jy
! Component: 100  -  total flux cleaned = 0.122193 Jy
! Total flux subtracted in 100 components = 0.122193 Jy
! Clean residual min=-0.010317 max=0.010779 Jy/beam
! Clean residual mean=0.000023 rms=0.002407 Jy/beam
! Combined flux in latest and established models = 0.122193 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.122193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093108Jy  sigma=0.545668
! Fit after  self-cal, rms=0.092981Jy  sigma=0.545000
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=8.127 mas, bpa=-2.269 degrees
! Estimated noise=1.17857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124126 Jy
! Component: 100  -  total flux cleaned = 0.0180851 Jy
! Component: 150  -  total flux cleaned = 0.0208694 Jy
! Component: 200  -  total flux cleaned = 0.0223901 Jy
! Total flux subtracted in 200 components = 0.0223901 Jy
! Clean residual min=-0.010155 max=0.008407 Jy/beam
! Clean residual mean=0.000043 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 0.144583 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 63 components and 0.144583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091828Jy  sigma=0.531047
! Fit after  self-cal, rms=0.091840Jy  sigma=0.530944
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.45 x 8.127 at -2.269 degrees (North through East)
! Clean map  min=-0.0099286  max=0.13029 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.06     HN        1.22     KP        1.04     
!   LA        1.04     MK        1.03     NL        1.04     OV        0.64     
!   PT        1.07     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.04     HN        1.21     KP        1.02     
!   LA        1.02     MK        0.98     NL        0.92     OV        0.91     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.28     FD        1.05     HN        1.15     KP        1.04     
!   LA        1.08     MK        1.02     NL        0.84     OV        0.65     
!   PT        1.05     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.091840Jy  sigma=0.530944
! Fit after  self-cal, rms=0.091793Jy  sigma=0.491351
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.481 mas, bmaj=8.198 mas, bpa=-1.948 degrees
! Estimated noise=1.17925 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0019508 Jy
! Component: 100  -  total flux cleaned = -0.00234473 Jy
! Component: 150  -  total flux cleaned = -0.00252127 Jy
! Component: 200  -  total flux cleaned = -0.00264332 Jy
! Total flux subtracted in 200 components = -0.00264332 Jy
! Clean residual min=-0.004363 max=0.004851 Jy/beam
! Clean residual mean=0.000012 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.14194 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 69 components and 0.14194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091711Jy  sigma=0.491010
! Fit after  self-cal, rms=0.092079Jy  sigma=0.489978
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092079Jy  sigma=0.489978
! Fit after  self-cal, rms=0.101412Jy  sigma=0.478657
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.487 mas, bmaj=8.228 mas, bpa=-2.025 degrees
! Estimated noise=1.17739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.17434e-05 Jy
! Component: 100  -  total flux cleaned = 1.29536e-05 Jy
! Component: 150  -  total flux cleaned = 1.18994e-05 Jy
! Component: 200  -  total flux cleaned = -7.9811e-06 Jy
! Total flux subtracted in 200 components = -7.9811e-06 Jy
! Clean residual min=-0.002554 max=0.002310 Jy/beam
! Clean residual mean=0.000000 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.141932 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 75 components and 0.141932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101394Jy  sigma=0.478601
! Fit after  self-cal, rms=0.101504Jy  sigma=0.478458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138605 Jy
! Component: 100  -  total flux cleaned = -0.000138434 Jy
! Component: 150  -  total flux cleaned = -0.000155981 Jy
! Component: 200  -  total flux cleaned = -0.000156737 Jy
! Total flux subtracted in 200 components = -0.000156737 Jy
! Clean residual min=-0.002503 max=0.002278 Jy/beam
! Clean residual mean=0.000000 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.141775 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 75 components and 0.141775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101494Jy  sigma=0.478426
! Fit after  self-cal, rms=0.101487Jy  sigma=0.478421
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101487Jy  sigma=0.478421
! Fit after  self-cal, rms=0.102037Jy  sigma=0.478405
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.485 mas, bmaj=8.236 mas, bpa=-2.101 degrees
! Estimated noise=1.17818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.16509e-05 Jy
! Component: 100  -  total flux cleaned = -1.59877e-05 Jy
! Component: 150  -  total flux cleaned = -1.57415e-05 Jy
! Component: 200  -  total flux cleaned = -3.04722e-05 Jy
! Total flux subtracted in 200 components = -3.04722e-05 Jy
! Clean residual min=-0.002467 max=0.002265 Jy/beam
! Clean residual mean=0.000000 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.141745 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.141745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102027Jy  sigma=0.478377
! Fit after  self-cal, rms=0.102025Jy  sigma=0.478372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.6335e-05 Jy
! Component: 100  -  total flux cleaned = -6.60619e-05 Jy
! Component: 150  -  total flux cleaned = -7.91705e-05 Jy
! Component: 200  -  total flux cleaned = -7.95193e-05 Jy
! Total flux subtracted in 200 components = -7.95193e-05 Jy
! Clean residual min=-0.002437 max=0.002252 Jy/beam
! Clean residual mean=0.000000 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.141665 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 79 components and 0.141665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102019Jy  sigma=0.478351
! Fit after  self-cal, rms=0.102016Jy  sigma=0.478348
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102016Jy  sigma=0.478348
! Fit after  self-cal, rms=0.102166Jy  sigma=0.478340
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.04 mas, bmaj=15.74 mas, bpa=1.26 degrees
! Estimated noise=1.40275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.56066e-06 Jy
! Component: 100  -  total flux cleaned = 1.42848e-05 Jy
! Component: 150  -  total flux cleaned = 1.4049e-05 Jy
! Component: 200  -  total flux cleaned = 1.39781e-05 Jy
! Total flux subtracted in 200 components = 1.39781e-05 Jy
! Clean residual min=-0.002395 max=0.002189 Jy/beam
! Clean residual mean=-0.000000 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.141679 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 0.141679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102165Jy  sigma=0.478341
! Fit after  self-cal, rms=0.102163Jy  sigma=0.478325
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.32373e-05 Jy
! Component: 100  -  total flux cleaned = -2.17832e-05 Jy
! Component: 150  -  total flux cleaned = -1.00673e-05 Jy
! Component: 200  -  total flux cleaned = -1.01901e-05 Jy
! Total flux subtracted in 200 components = -1.01901e-05 Jy
! Clean residual min=-0.002385 max=0.002173 Jy/beam
! Clean residual mean=-0.000000 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.141669 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 86 components and 0.141669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102165Jy  sigma=0.478334
! Fit after  self-cal, rms=0.102161Jy  sigma=0.478321
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=8.242 mas, bpa=-2.157 degrees
! Estimated noise=1.17861 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.483 x 8.242 at -2.157 degrees (North through East)
! Clean map  min=-0.00232  max=0.13208 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.792 mas, bmaj=6.785 mas, bpa=-2.826 degrees
! Estimated noise=1.94685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0998394 Jy
! Component: 100  -  total flux cleaned = 0.122227 Jy
! Component: 150  -  total flux cleaned = 0.131062 Jy
! Component: 200  -  total flux cleaned = 0.136101 Jy
! Total flux subtracted in 200 components = 0.136101 Jy
! Clean residual min=-0.003641 max=0.003564 Jy/beam
! Clean residual mean=-0.000004 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.136101 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.136101 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=8.242 mas, bpa=-2.157 degrees
! Estimated noise=1.17861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423343 Jy
! Component: 100  -  total flux cleaned = 0.00496404 Jy
! Component: 150  -  total flux cleaned = 0.00529391 Jy
! Component: 200  -  total flux cleaned = 0.00554872 Jy
! Total flux subtracted in 200 components = 0.00554872 Jy
! Clean residual min=-0.002585 max=0.002291 Jy/beam
! Clean residual mean=-0.000000 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.14165 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 44 components and 0.14165 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.04 mas, bmaj=15.74 mas, bpa=1.26 degrees
! Estimated noise=1.40275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033248 Jy
! Component: 100  -  total flux cleaned = 0.000370227 Jy
! Component: 150  -  total flux cleaned = 0.000372026 Jy
! Component: 200  -  total flux cleaned = 0.000373263 Jy
! Total flux subtracted in 200 components = 0.000373263 Jy
! Clean residual min=-0.002432 max=0.002141 Jy/beam
! Clean residual mean=-0.000000 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.142023 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.98654e-05 Jy
! Component: 100  -  total flux cleaned = -5.7173e-05 Jy
! Component: 150  -  total flux cleaned = -8.71928e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010023 Jy
! Total flux subtracted in 200 components = -0.00010023 Jy
! Clean residual min=-0.002408 max=0.002138 Jy/beam
! Clean residual mean=-0.000000 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.141923 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.141923 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=8.242 mas, bpa=-2.157 degrees
! Estimated noise=1.17861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301283 Jy
! Component: 100  -  total flux cleaned = 0.000278355 Jy
! Component: 150  -  total flux cleaned = 0.000278813 Jy
! Component: 200  -  total flux cleaned = 0.000259525 Jy
! Total flux subtracted in 200 components = 0.000259525 Jy
! Clean residual min=-0.002432 max=0.002223 Jy/beam
! Clean residual mean=0.000000 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.142182 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.142182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102192Jy  sigma=0.478400
! Fit after  self-cal, rms=0.102189Jy  sigma=0.478396
wmodel J1549-1639_S_a_map.mod
! Writing 71 model components to file: J1549-1639_S_a_map.mod
wobs   J1549-1639_S_a_uvs.fits
! Writing UV FITS file: J1549-1639_S_a_uvs.fits
wwins  J1549-1639_S_a_map.win
! wwins: Wrote 1 windows to J1549-1639_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146178 Jy
! Component: 100  -  total flux cleaned = 4.58029e-05 Jy
! Component: 150  -  total flux cleaned = 0.000191543 Jy
! Component: 200  -  total flux cleaned = 0.000294007 Jy
! Component: 250  -  total flux cleaned = 0.000261531 Jy
! Component: 300  -  total flux cleaned = 0.00032347 Jy
! Component: 350  -  total flux cleaned = 0.000382827 Jy
! Component: 400  -  total flux cleaned = 0.000440384 Jy
! Component: 450  -  total flux cleaned = 0.000467806 Jy
! Component: 500  -  total flux cleaned = 0.000467498 Jy
! Component: 550  -  total flux cleaned = 0.000389128 Jy
! Component: 600  -  total flux cleaned = 0.000389182 Jy
! Component: 650  -  total flux cleaned = 0.000313771 Jy
! Component: 700  -  total flux cleaned = 0.000264236 Jy
! Component: 750  -  total flux cleaned = 0.00014388 Jy
! Component: 800  -  total flux cleaned = 4.97683e-05 Jy
! Component: 850  -  total flux cleaned = -4.29875e-05 Jy
! Component: 900  -  total flux cleaned = -6.62893e-05 Jy
! Component: 950  -  total flux cleaned = -0.000111693 Jy
! Component: 1000  -  total flux cleaned = -0.000155975 Jy
! Component: 1050  -  total flux cleaned = -0.000178214 Jy
! Component: 1100  -  total flux cleaned = -0.000221368 Jy
! Component: 1150  -  total flux cleaned = -0.000242386 Jy
! Component: 1200  -  total flux cleaned = -0.000305014 Jy
! Component: 1250  -  total flux cleaned = -0.000325651 Jy
! Component: 1300  -  total flux cleaned = -0.000346359 Jy
! Component: 1350  -  total flux cleaned = -0.000367006 Jy
! Component: 1400  -  total flux cleaned = -0.000427168 Jy
! Component: 1450  -  total flux cleaned = -0.000486212 Jy
! Component: 1500  -  total flux cleaned = -0.000505727 Jy
! Component: 1550  -  total flux cleaned = -0.000505912 Jy
! Component: 1600  -  total flux cleaned = -0.000525079 Jy
! Component: 1650  -  total flux cleaned = -0.000600929 Jy
! Component: 1700  -  total flux cleaned = -0.000582089 Jy
! Component: 1750  -  total flux cleaned = -0.000619085 Jy
! Component: 1800  -  total flux cleaned = -0.000619124 Jy
! Component: 1850  -  total flux cleaned = -0.000637128 Jy
! Component: 1900  -  total flux cleaned = -0.000565241 Jy
! Component: 1950  -  total flux cleaned = -0.000565182 Jy
! Component: 2000  -  total flux cleaned = -0.000512273 Jy
! Component: 2050  -  total flux cleaned = -0.000512262 Jy
! Component: 2100  -  total flux cleaned = -0.000460428 Jy
! Component: 2150  -  total flux cleaned = -0.000426054 Jy
! Component: 2200  -  total flux cleaned = -0.000374837 Jy
! Component: 2250  -  total flux cleaned = -0.00029048 Jy
! Component: 2300  -  total flux cleaned = -0.000273772 Jy
! Component: 2350  -  total flux cleaned = -0.000174072 Jy
! Component: 2400  -  total flux cleaned = -0.000108302 Jy
! Component: 2450  -  total flux cleaned = -0.000108343 Jy
! Component: 2500  -  total flux cleaned = -0.000108305 Jy
! Component: 2550  -  total flux cleaned = -2.78446e-05 Jy
! Component: 2600  -  total flux cleaned = -1.2167e-05 Jy
! Component: 2650  -  total flux cleaned = 3.54705e-05 Jy
! Component: 2700  -  total flux cleaned = 0.000114103 Jy
! Component: 2750  -  total flux cleaned = 0.000113904 Jy
! Component: 2800  -  total flux cleaned = 0.00017604 Jy
! Component: 2850  -  total flux cleaned = 0.000237622 Jy
! Component: 2900  -  total flux cleaned = 0.000237659 Jy
! Component: 2950  -  total flux cleaned = 0.000313588 Jy
! Component: 3000  -  total flux cleaned = 0.00035875 Jy
! Component: 3050  -  total flux cleaned = 0.000433592 Jy
! Component: 3100  -  total flux cleaned = 0.000433676 Jy
! Component: 3150  -  total flux cleaned = 0.000448387 Jy
! Component: 3200  -  total flux cleaned = 0.000492492 Jy
! Component: 3250  -  total flux cleaned = 0.000477864 Jy
! Component: 3300  -  total flux cleaned = 0.000506875 Jy
! Component: 3350  -  total flux cleaned = 0.00055008 Jy
! Component: 3400  -  total flux cleaned = 0.000578773 Jy
! Component: 3450  -  total flux cleaned = 0.000578764 Jy
! Component: 3500  -  total flux cleaned = 0.000550542 Jy
! Component: 3550  -  total flux cleaned = 0.000620995 Jy
! Component: 3600  -  total flux cleaned = 0.000634981 Jy
! Component: 3650  -  total flux cleaned = 0.000690689 Jy
! Component: 3700  -  total flux cleaned = 0.000663083 Jy
! Component: 3750  -  total flux cleaned = 0.000704392 Jy
! Component: 3800  -  total flux cleaned = 0.000704359 Jy
! Component: 3850  -  total flux cleaned = 0.00069065 Jy
! Component: 3900  -  total flux cleaned = 0.000731294 Jy
! Component: 3950  -  total flux cleaned = 0.000717815 Jy
! Component: 4000  -  total flux cleaned = 0.000731197 Jy
! Component: 4050  -  total flux cleaned = 0.000717805 Jy
! Total flux subtracted in 4096 components = 0.000731163 Jy
! Clean residual min=-0.000780 max=0.000738 Jy/beam
! Clean residual mean=0.000002 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.142914 Jy
keep
! Adding 249 model components to the UV plane model.
! The established model now contains 320 components and 0.142914 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1549-1639_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.483 x 8.242 at -2.157 degrees (North through East)
! Clean map  min=-0.0017581  max=0.13175 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1549-1639_S_a_map.fits
wmodel /image_prod/ug002_uva//J1549-1639_S_a_map.mod
! Writing 320 model components to file: /image_prod/ug002_uva//J1549-1639_S_a_map.mod
wobs   /image_prod/ug002_uva//J1549-1639_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1549-1639_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J1549-1639_S_a_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1549-1639_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.131748 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000230497 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.524857 0.524857 1.04971 2.09943 4.19885 8.39771 16.7954 33.5908 67.1817
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.131 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  571.584 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1549-1639_S_a_dfm.log closed on Thu Mar  5 02:26:40 2020