! Started logfile: /image_prod/ug002_uva//J1547+4937_S_b_dfm.log on Thu Mar 5 02:25:53 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1547+4937_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1547+4937_S_b_uva.fits ! AN table 1: 180 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.690476 visibilities/baseline/integration-bin. ! Found source: J1547+4937 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 10440 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1547+4937_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004293Jy sigma=8.899955 ! Fit after self-cal, rms=0.964203Jy sigma=8.490538 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.248 mas, bmaj=12 mas, bpa=77.21 degrees ! Estimated noise=1.40751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270841 Jy ! Component: 100 - total flux cleaned = 0.0366521 Jy ! Total flux subtracted in 100 components = 0.0366521 Jy ! Clean residual min=-0.004860 max=0.005961 Jy/beam ! Clean residual mean=-0.000022 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.0366521 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0366521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060873Jy sigma=0.502090 ! Fit after self-cal, rms=0.059374Jy sigma=0.489986 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.644 mas, bmaj=12.13 mas, bpa=76.38 degrees ! Estimated noise=0.809397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117782 Jy ! Component: 100 - total flux cleaned = 0.0189741 Jy ! Component: 150 - total flux cleaned = 0.0238719 Jy ! Component: 200 - total flux cleaned = 0.0272999 Jy ! Total flux subtracted in 200 components = 0.0272999 Jy ! Clean residual min=-0.006013 max=0.006401 Jy/beam ! Clean residual mean=-0.000072 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.063952 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 108 components and 0.063952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057193Jy sigma=0.460781 ! Fit after self-cal, rms=0.057037Jy sigma=0.459243 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.644 x 12.13 at 76.38 degrees (North through East) ! Clean map min=-0.0060007 max=0.03982 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.90 HN 0.96 KP 0.98 ! LA 0.91 NL 1.20 OV 1.30 PT 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.88 HN 0.89 KP 1.02 ! LA 0.95 NL 0.83 OV 1.33 PT 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.01 KP 1.03 ! LA 0.99 NL 0.93 OV 1.39 PT 0.87 ! ! ! Fit before self-cal, rms=0.057037Jy sigma=0.459243 ! Fit after self-cal, rms=0.059276Jy sigma=0.451899 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.673 mas, bmaj=12.44 mas, bpa=76.68 degrees ! Estimated noise=0.79763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110374 Jy ! Component: 100 - total flux cleaned = 0.00129472 Jy ! Component: 150 - total flux cleaned = 0.00134639 Jy ! Component: 200 - total flux cleaned = 0.00141286 Jy ! Total flux subtracted in 200 components = 0.00141286 Jy ! Clean residual min=-0.005955 max=0.005541 Jy/beam ! Clean residual mean=-0.000075 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 0.0653648 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 123 components and 0.0653649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059235Jy sigma=0.451563 ! Fit after self-cal, rms=0.059678Jy sigma=0.450675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059678Jy sigma=0.450675 ! Fit after self-cal, rms=0.063470Jy sigma=0.440172 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.644 mas, bmaj=12.34 mas, bpa=77.05 degrees ! Estimated noise=0.808769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016804 Jy ! Component: 100 - total flux cleaned = -0.000226742 Jy ! Component: 150 - total flux cleaned = -0.000276734 Jy ! Component: 200 - total flux cleaned = -0.000319558 Jy ! Total flux subtracted in 200 components = -0.000319558 Jy ! Clean residual min=-0.004291 max=0.003694 Jy/beam ! Clean residual mean=-0.000050 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.0650453 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 136 components and 0.0650453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063427Jy sigma=0.440005 ! Fit after self-cal, rms=0.063952Jy sigma=0.438312 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319278 Jy ! Component: 100 - total flux cleaned = -0.000320566 Jy ! Component: 150 - total flux cleaned = -0.000299554 Jy ! Component: 200 - total flux cleaned = -0.00028056 Jy ! Total flux subtracted in 200 components = -0.00028056 Jy ! Clean residual min=-0.004314 max=0.003472 Jy/beam ! Clean residual mean=-0.000050 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.0647647 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 149 components and 0.0647647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063933Jy sigma=0.438216 ! Fit after self-cal, rms=0.063917Jy sigma=0.438166 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063917Jy sigma=0.438166 ! Fit after self-cal, rms=0.065669Jy sigma=0.437862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.564 mas, bmaj=12.37 mas, bpa=77.89 degrees ! Estimated noise=0.810636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18525e-05 Jy ! Component: 100 - total flux cleaned = -6.8496e-05 Jy ! Component: 150 - total flux cleaned = -0.000114969 Jy ! Component: 200 - total flux cleaned = -0.0001346 Jy ! Total flux subtracted in 200 components = -0.0001346 Jy ! Clean residual min=-0.004205 max=0.003511 Jy/beam ! Clean residual mean=-0.000047 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.0646301 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 154 components and 0.0646301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065633Jy sigma=0.437749 ! Fit after self-cal, rms=0.065751Jy sigma=0.437651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257653 Jy ! Component: 100 - total flux cleaned = -0.000233755 Jy ! Component: 150 - total flux cleaned = -0.000194879 Jy ! Component: 200 - total flux cleaned = -0.000179239 Jy ! Total flux subtracted in 200 components = -0.000179239 Jy ! Clean residual min=-0.004218 max=0.003503 Jy/beam ! Clean residual mean=-0.000047 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.0644509 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 158 components and 0.0644509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065730Jy sigma=0.437580 ! Fit after self-cal, rms=0.065733Jy sigma=0.437532 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065733Jy sigma=0.437532 ! Fit after self-cal, rms=0.066413Jy sigma=0.437439 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.09 mas, bmaj=13.51 mas, bpa=69.89 degrees ! Estimated noise=0.817204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182594 Jy ! Component: 100 - total flux cleaned = -0.000120574 Jy ! Component: 150 - total flux cleaned = -0.000146122 Jy ! Component: 200 - total flux cleaned = -0.00018601 Jy ! Total flux subtracted in 200 components = -0.00018601 Jy ! Clean residual min=-0.005086 max=0.004060 Jy/beam ! Clean residual mean=-0.000059 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.0642649 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 165 components and 0.0642649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066379Jy sigma=0.437352 ! Fit after self-cal, rms=0.066399Jy sigma=0.437257 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257479 Jy ! Component: 100 - total flux cleaned = -0.000304438 Jy ! Component: 150 - total flux cleaned = -0.000306105 Jy ! Component: 200 - total flux cleaned = -0.00029021 Jy ! Total flux subtracted in 200 components = -0.00029021 Jy ! Clean residual min=-0.005112 max=0.004144 Jy/beam ! Clean residual mean=-0.000061 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.0639747 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 166 components and 0.0639746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066378Jy sigma=0.437223 ! Fit after self-cal, rms=0.066375Jy sigma=0.437162 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=12.41 mas, bpa=78.7 degrees ! Estimated noise=0.810902 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.485 x 12.41 at 78.7 degrees (North through East) ! Clean map min=-0.0043004 max=0.03783 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.898 mas, bmaj=12.37 mas, bpa=79.08 degrees ! Estimated noise=1.46031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297137 Jy ! Component: 100 - total flux cleaned = 0.0424265 Jy ! Component: 150 - total flux cleaned = 0.0501741 Jy ! Component: 200 - total flux cleaned = 0.0551891 Jy ! Total flux subtracted in 200 components = 0.0551891 Jy ! Clean residual min=-0.005555 max=0.003951 Jy/beam ! Clean residual mean=-0.000039 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.0551891 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.0551891 Jy ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=12.41 mas, bpa=78.7 degrees ! Estimated noise=0.810902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415067 Jy ! Component: 100 - total flux cleaned = 0.00615329 Jy ! Component: 150 - total flux cleaned = 0.00681817 Jy ! Component: 200 - total flux cleaned = 0.00730254 Jy ! Total flux subtracted in 200 components = 0.00730254 Jy ! Clean residual min=-0.004427 max=0.003537 Jy/beam ! Clean residual mean=-0.000049 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.0624916 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 0.0624916 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.09 mas, bmaj=13.51 mas, bpa=69.89 degrees ! Estimated noise=0.817204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068042 Jy ! Component: 100 - total flux cleaned = 0.000882225 Jy ! Component: 150 - total flux cleaned = 0.00103557 Jy ! Component: 200 - total flux cleaned = 0.00113491 Jy ! Total flux subtracted in 200 components = 0.00113491 Jy ! Clean residual min=-0.005255 max=0.004127 Jy/beam ! Clean residual mean=-0.000063 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.0636266 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90355e-05 Jy ! Component: 100 - total flux cleaned = 4.95581e-05 Jy ! Component: 150 - total flux cleaned = 5.02403e-05 Jy ! Component: 200 - total flux cleaned = 5.01307e-05 Jy ! Total flux subtracted in 200 components = 5.01307e-05 Jy ! Clean residual min=-0.005193 max=0.004129 Jy/beam ! Clean residual mean=-0.000062 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.0636767 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 96 components and 0.0636767 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.485 mas, bmaj=12.41 mas, bpa=78.7 degrees ! Estimated noise=0.810902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.49099e-05 Jy ! Component: 100 - total flux cleaned = -0.000112143 Jy ! Component: 150 - total flux cleaned = -0.000143779 Jy ! Component: 200 - total flux cleaned = -0.000157455 Jy ! Total flux subtracted in 200 components = -0.000157455 Jy ! Clean residual min=-0.004297 max=0.003598 Jy/beam ! Clean residual mean=-0.000048 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.0635192 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 0.0635192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.066394Jy sigma=0.437462 ! Fit after self-cal, rms=0.066359Jy sigma=0.437177 wmodel J1547+4937_S_b_map.mod ! Writing 120 model components to file: J1547+4937_S_b_map.mod wobs J1547+4937_S_b_uvs.fits ! Writing UV FITS file: J1547+4937_S_b_uvs.fits wwins J1547+4937_S_b_map.win ! wwins: Wrote 1 windows to J1547+4937_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169949 Jy ! Component: 100 - total flux cleaned = -0.00260905 Jy ! Component: 150 - total flux cleaned = -0.00296566 Jy ! Component: 200 - total flux cleaned = -0.00318579 Jy ! Component: 250 - total flux cleaned = -0.00359494 Jy ! Component: 300 - total flux cleaned = -0.00398111 Jy ! Component: 350 - total flux cleaned = -0.00425928 Jy ! Component: 400 - total flux cleaned = -0.00448039 Jy ! Component: 450 - total flux cleaned = -0.00448117 Jy ! Component: 500 - total flux cleaned = -0.0041943 Jy ! Component: 550 - total flux cleaned = -0.00411533 Jy ! Component: 600 - total flux cleaned = -0.00399873 Jy ! Component: 650 - total flux cleaned = -0.00377458 Jy ! Component: 700 - total flux cleaned = -0.00366558 Jy ! Component: 750 - total flux cleaned = -0.003524 Jy ! Component: 800 - total flux cleaned = -0.00335383 Jy ! Component: 850 - total flux cleaned = -0.00328735 Jy ! Component: 900 - total flux cleaned = -0.0031251 Jy ! Component: 950 - total flux cleaned = -0.00293669 Jy ! Component: 1000 - total flux cleaned = -0.00281484 Jy ! Component: 1050 - total flux cleaned = -0.00272539 Jy ! Component: 1100 - total flux cleaned = -0.00260854 Jy ! Component: 1150 - total flux cleaned = -0.00246675 Jy ! Component: 1200 - total flux cleaned = -0.00238397 Jy ! Component: 1250 - total flux cleaned = -0.00222252 Jy ! Component: 1300 - total flux cleaned = -0.0021176 Jy ! Component: 1350 - total flux cleaned = -0.00204067 Jy ! Component: 1400 - total flux cleaned = -0.00188978 Jy ! Component: 1450 - total flux cleaned = -0.00181573 Jy ! Component: 1500 - total flux cleaned = -0.00167213 Jy ! Component: 1550 - total flux cleaned = -0.00162492 Jy ! Component: 1600 - total flux cleaned = -0.00153234 Jy ! Component: 1650 - total flux cleaned = -0.00141938 Jy ! Component: 1700 - total flux cleaned = -0.00130906 Jy ! Component: 1750 - total flux cleaned = -0.00126598 Jy ! Component: 1800 - total flux cleaned = -0.00126635 Jy ! Component: 1850 - total flux cleaned = -0.00122445 Jy ! Component: 1900 - total flux cleaned = -0.00114219 Jy ! Component: 1950 - total flux cleaned = -0.00116245 Jy ! Component: 2000 - total flux cleaned = -0.00108269 Jy ! Component: 2050 - total flux cleaned = -0.00106306 Jy ! Component: 2100 - total flux cleaned = -0.00102468 Jy ! Component: 2150 - total flux cleaned = -0.00102516 Jy ! Component: 2200 - total flux cleaned = -0.00102499 Jy ! Component: 2250 - total flux cleaned = -0.000951824 Jy ! Component: 2300 - total flux cleaned = -0.00097034 Jy ! Component: 2350 - total flux cleaned = -0.000970474 Jy ! Component: 2400 - total flux cleaned = -0.000988283 Jy ! Component: 2450 - total flux cleaned = -0.00104047 Jy ! Component: 2500 - total flux cleaned = -0.00114352 Jy ! Component: 2550 - total flux cleaned = -0.00117736 Jy ! Component: 2600 - total flux cleaned = -0.00119389 Jy ! Component: 2650 - total flux cleaned = -0.00127651 Jy ! Component: 2700 - total flux cleaned = -0.00129266 Jy ! Component: 2750 - total flux cleaned = -0.00132501 Jy ! Component: 2800 - total flux cleaned = -0.0014362 Jy ! Component: 2850 - total flux cleaned = -0.00145188 Jy ! Component: 2900 - total flux cleaned = -0.0015137 Jy ! Component: 2950 - total flux cleaned = -0.00154427 Jy ! Component: 3000 - total flux cleaned = -0.00161984 Jy ! Component: 3050 - total flux cleaned = -0.0016348 Jy ! Component: 3100 - total flux cleaned = -0.00169387 Jy ! Component: 3150 - total flux cleaned = -0.00173763 Jy ! Component: 3200 - total flux cleaned = -0.00176641 Jy ! Component: 3250 - total flux cleaned = -0.00180923 Jy ! Component: 3300 - total flux cleaned = -0.0018797 Jy ! Component: 3350 - total flux cleaned = -0.00187962 Jy ! Component: 3400 - total flux cleaned = -0.00189326 Jy ! Component: 3450 - total flux cleaned = -0.00192072 Jy ! Component: 3500 - total flux cleaned = -0.00189355 Jy ! Component: 3550 - total flux cleaned = -0.0019204 Jy ! Component: 3600 - total flux cleaned = -0.00192038 Jy ! Component: 3650 - total flux cleaned = -0.00193353 Jy ! Component: 3700 - total flux cleaned = -0.00189399 Jy ! Component: 3750 - total flux cleaned = -0.00190707 Jy ! Component: 3800 - total flux cleaned = -0.00194587 Jy ! Component: 3850 - total flux cleaned = -0.00194585 Jy ! Component: 3900 - total flux cleaned = -0.00198411 Jy ! Component: 3950 - total flux cleaned = -0.00200944 Jy ! Component: 4000 - total flux cleaned = -0.0019969 Jy ! Component: 4050 - total flux cleaned = -0.00203445 Jy ! Total flux subtracted in 4096 components = -0.00208405 Jy ! Clean residual min=-0.000741 max=0.000724 Jy/beam ! Clean residual mean=-0.000016 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.0614352 Jy keep ! Adding 519 model components to the UV plane model. ! The established model now contains 639 components and 0.0614352 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1547+4937_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.485 x 12.41 at 78.7 degrees (North through East) ! Clean map min=-0.002804 max=0.038024 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1547+4937_S_b_map.fits wmodel /image_prod/ug002_uva//J1547+4937_S_b_map.mod ! Writing 639 model components to file: /image_prod/ug002_uva//J1547+4937_S_b_map.mod wobs /image_prod/ug002_uva//J1547+4937_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1547+4937_S_b_uvs.fits wwins /image_prod/ug002_uva//J1547+4937_S_b_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1547+4937_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0380244 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000263389 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.07805 2.07805 4.1561 8.3122 16.6244 33.2488 66.4976 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.038 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 144.366 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1547+4937_S_b_dfm.log closed on Thu Mar 5 02:25:57 2020