! Started logfile: /image_prod/ug002_uva//J1539+0534_X_dfm.log on Thu Mar 5 02:21:26 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1539+0534_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1539+0534_X_uva.fits ! AN table 1: 20 integrations on 28 of 28 possible baselines. ! AN table 2: 20 integrations on 21 of 21 possible baselines. ! AN table 3: 20 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.984746 visibilities/baseline/integration-bin. ! Found source: J1539+0534 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 13944 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1539+0534_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.004099Jy sigma=9.170750 ! Fit after self-cal, rms=0.930700Jy sigma=8.473046 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7224 mas, bmaj=1.804 mas, bpa=2.72 degrees ! Estimated noise=1.22305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536943 Jy ! Component: 100 - total flux cleaned = 0.0698782 Jy ! Total flux subtracted in 100 components = 0.0698782 Jy ! Clean residual min=-0.005927 max=0.008388 Jy/beam ! Clean residual mean=0.000002 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.0698783 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0698783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059659Jy sigma=0.497423 ! Fit after self-cal, rms=0.059088Jy sigma=0.492385 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813666 Jy ! Component: 100 - total flux cleaned = 0.0121097 Jy ! Total flux subtracted in 100 components = 0.0121097 Jy ! Clean residual min=-0.004597 max=0.006719 Jy/beam ! Clean residual mean=0.000005 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.0819879 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.0819879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058082Jy sigma=0.478217 ! Fit after self-cal, rms=0.058080Jy sigma=0.478027 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9295 mas, bmaj=2.135 mas, bpa=2.954 degrees ! Estimated noise=0.670945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305063 Jy ! Component: 100 - total flux cleaned = 0.00365788 Jy ! Component: 150 - total flux cleaned = 0.00370398 Jy ! Component: 200 - total flux cleaned = 0.00374224 Jy ! Total flux subtracted in 200 components = 0.00374224 Jy ! Clean residual min=-0.004000 max=0.005369 Jy/beam ! Clean residual mean=0.000010 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.0857302 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0857302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057969Jy sigma=0.475965 ! Fit after self-cal, rms=0.057962Jy sigma=0.475878 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9295 x 2.135 at 2.954 degrees (North through East) ! Clean map min=-0.0039131 max=0.067711 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 KP 1.05 LA 0.88 ! MK 0.86 NL 1.19 OV 0.90 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.03 HN 1.66 KP 1.08 ! LA 0.94 NL 1.20 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.69 HN 1.09 LA 0.90 OV 0.98 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 KP 1.06 LA 0.89 ! MK 0.86 NL 1.22 OV 0.89 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.45 KP 1.04 ! LA 0.87 NL 1.12 OV 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.84 HN 0.87 LA 0.94 OV 0.92 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 KP 1.18 LA 0.87 ! MK 0.87 NL 1.17 OV 0.82 SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.01 HN 1.45 KP 1.15 ! LA 0.87 NL 1.10 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.69 HN 0.97 LA 1.00 OV 0.90 ! SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 KP 1.17 LA 0.88 ! MK 0.82 NL 1.20 OV 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.98 HN 1.35 KP 1.17 ! LA 0.88 NL 1.23 OV 0.84 ! ! Telescope amplitude corrections in sub-array 3: ! FD 2.07 HN 1.00 LA 0.86 OV 1.02 ! SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.89 KP 1.10 LA 0.86 ! MK 0.88 NL 1.33 OV 0.93 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.47 KP 1.06 ! LA 0.88 NL 1.17 OV 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! FD 2.32 HN 1.02 LA 0.98 OV 0.84 ! SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 KP 1.09 LA 0.86 ! MK 0.90 NL 1.24 OV 0.86 SC 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 1.05 HN 1.36 KP 1.02 ! LA 0.94 NL 1.11 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.63 HN 0.81 LA 0.96 OV 0.88 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 KP 1.13 LA 0.91 ! MK 0.86 NL 1.20 OV 0.87 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 0.97 HN 1.56 KP 1.10 ! LA 0.98 NL 1.17 OV 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.90 HN 0.89 LA 0.84 OV 0.95 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.99 KP 1.12 LA 0.87 ! MK 0.79 NL 1.21 OV 0.89 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 HN 1.25 KP 1.11 ! LA 0.92 NL 1.24 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.89 HN 0.97 LA 0.88 OV 0.94 ! SC 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 KP 1.13 LA 0.86 ! MK 0.87 NL 1.24 OV 0.87 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.99 HN 1.17 KP 1.09 ! LA 0.87 NL 1.29 OV 0.82 ! ! Telescope amplitude corrections in sub-array 3: ! FD 2.00 HN 0.75 LA 0.89 OV 0.93 ! SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 KP 1.10 LA 0.91 ! MK 0.93 NL 1.18 OV 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.03 HN 1.33 KP 1.05 ! LA 0.85 NL 1.12 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.59 HN 0.91 LA 0.76 OV 1.09 ! SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.95 KP 1.15 LA 0.91 ! MK 0.86 NL 1.23 OV 0.88 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.90 HN 1.04 KP 1.10 ! LA 0.91 NL 1.19 OV 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.90 HN 0.93 LA 0.97 OV 0.90 ! SC 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 KP 1.06 LA 0.88 ! MK 0.87 NL 1.14 OV 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.91 HN 1.29 KP 1.19 ! LA 0.86 NL 1.24 OV 0.83 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.65 HN 0.93 LA 1.05 OV 0.85 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.057962Jy sigma=0.475878 ! Fit after self-cal, rms=0.063969Jy sigma=0.456942 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9084 mas, bmaj=2.104 mas, bpa=1.984 degrees ! Estimated noise=0.662603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229582 Jy ! Component: 100 - total flux cleaned = 0.0021749 Jy ! Component: 150 - total flux cleaned = 0.00194686 Jy ! Component: 200 - total flux cleaned = 0.0017506 Jy ! Total flux subtracted in 200 components = 0.0017506 Jy ! Clean residual min=-0.001582 max=0.001984 Jy/beam ! Clean residual mean=0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0874808 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.0874808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063818Jy sigma=0.455232 ! Fit after self-cal, rms=0.064312Jy sigma=0.454120 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064312Jy sigma=0.454120 ! Fit after self-cal, rms=0.065142Jy sigma=0.453898 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8997 mas, bmaj=2.092 mas, bpa=1.895 degrees ! Estimated noise=0.662273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014621 Jy ! Component: 100 - total flux cleaned = 0.00138091 Jy ! Component: 150 - total flux cleaned = 0.00126509 Jy ! Component: 200 - total flux cleaned = 0.00112901 Jy ! Total flux subtracted in 200 components = 0.00112901 Jy ! Clean residual min=-0.001363 max=0.001701 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0886098 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.0886098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065072Jy sigma=0.453148 ! Fit after self-cal, rms=0.065126Jy sigma=0.453051 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142156 Jy ! Component: 100 - total flux cleaned = 0.00183409 Jy ! Component: 150 - total flux cleaned = 0.00203984 Jy ! Component: 200 - total flux cleaned = 0.00201278 Jy ! Total flux subtracted in 200 components = 0.00201278 Jy ! Clean residual min=-0.001223 max=0.001404 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.0906226 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.0906226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065075Jy sigma=0.452377 ! Fit after self-cal, rms=0.065064Jy sigma=0.452323 ! Inverting map ! Added new window around map position (-51.2, -41.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112412 Jy ! Component: 100 - total flux cleaned = 0.00130574 Jy ! Component: 150 - total flux cleaned = 0.0013065 Jy ! Component: 200 - total flux cleaned = 0.00130726 Jy ! Total flux subtracted in 200 components = 0.00130726 Jy ! Clean residual min=-0.001087 max=0.001256 Jy/beam ! Clean residual mean=0.000001 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.0919298 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.0919298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065031Jy sigma=0.452018 ! Fit after self-cal, rms=0.065029Jy sigma=0.451991 ! Inverting map ! Added new window around map position (13.6, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362557 Jy ! Component: 100 - total flux cleaned = 0.000416082 Jy ! Component: 150 - total flux cleaned = 0.000487887 Jy ! Component: 200 - total flux cleaned = 0.000532772 Jy ! Total flux subtracted in 200 components = 0.000532772 Jy ! Clean residual min=-0.001046 max=0.001130 Jy/beam ! Clean residual mean=0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.0924626 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.0924626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064997Jy sigma=0.451724 ! Fit after self-cal, rms=0.065001Jy sigma=0.451701 ! Inverting map ! Added new window around map position (-15.8, 50.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739442 Jy ! Component: 100 - total flux cleaned = 0.000935626 Jy ! Component: 150 - total flux cleaned = 0.00100152 Jy ! Component: 200 - total flux cleaned = 0.00102236 Jy ! Total flux subtracted in 200 components = 0.00102236 Jy ! Clean residual min=-0.000970 max=0.001049 Jy/beam ! Clean residual mean=0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0934849 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.0934849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064976Jy sigma=0.451491 ! Fit after self-cal, rms=0.064972Jy sigma=0.451474 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064972Jy sigma=0.451474 ! Fit after self-cal, rms=0.065324Jy sigma=0.451329 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8943 mas, bmaj=2.084 mas, bpa=1.904 degrees ! Estimated noise=0.661694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681156 Jy ! Component: 100 - total flux cleaned = 0.000968105 Jy ! Component: 150 - total flux cleaned = 0.00118092 Jy ! Component: 200 - total flux cleaned = 0.00135695 Jy ! Total flux subtracted in 200 components = 0.00135695 Jy ! Clean residual min=-0.000904 max=0.001017 Jy/beam ! Clean residual mean=0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.0948419 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.0948419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065308Jy sigma=0.451190 ! Fit after self-cal, rms=0.065328Jy sigma=0.451174 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518797 Jy ! Component: 100 - total flux cleaned = 0.000605753 Jy ! Component: 150 - total flux cleaned = 0.000757016 Jy ! Component: 200 - total flux cleaned = 0.000879091 Jy ! Total flux subtracted in 200 components = 0.000879091 Jy ! Clean residual min=-0.000851 max=0.000829 Jy/beam ! Clean residual mean=0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.095721 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.095721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065308Jy sigma=0.451027 ! Fit after self-cal, rms=0.065314Jy sigma=0.451015 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065314Jy sigma=0.451015 ! Fit after self-cal, rms=0.065546Jy sigma=0.451008 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=3.384 mas, bpa=17.23 degrees ! Estimated noise=0.836896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240873 Jy ! Component: 100 - total flux cleaned = 0.000544525 Jy ! Component: 150 - total flux cleaned = 0.000763182 Jy ! Component: 200 - total flux cleaned = 0.000959194 Jy ! Total flux subtracted in 200 components = 0.000959194 Jy ! Clean residual min=-0.000908 max=0.000957 Jy/beam ! Clean residual mean=0.000000 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.0966802 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.0966802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065540Jy sigma=0.450969 ! Fit after self-cal, rms=0.065545Jy sigma=0.450959 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159667 Jy ! Component: 100 - total flux cleaned = 0.000293803 Jy ! Component: 150 - total flux cleaned = 0.000407442 Jy ! Component: 200 - total flux cleaned = 0.000455799 Jy ! Total flux subtracted in 200 components = 0.000455799 Jy ! Clean residual min=-0.000909 max=0.000926 Jy/beam ! Clean residual mean=0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.097136 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 0.097136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065542Jy sigma=0.450947 ! Fit after self-cal, rms=0.065543Jy sigma=0.450946 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.082 mas, bpa=1.888 degrees ! Estimated noise=0.663001 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.082 at 1.888 degrees (North through East) ! Clean map min=-0.0013157 max=0.066429 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6989 mas, bmaj=1.76 mas, bpa=1.809 degrees ! Estimated noise=1.18637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0526996 Jy ! Component: 100 - total flux cleaned = 0.0704331 Jy ! Component: 150 - total flux cleaned = 0.0793166 Jy ! Component: 200 - total flux cleaned = 0.0846912 Jy ! Total flux subtracted in 200 components = 0.0846912 Jy ! Clean residual min=-0.002865 max=0.003265 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0846912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0846912 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.082 mas, bpa=1.888 degrees ! Estimated noise=0.663001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337703 Jy ! Component: 100 - total flux cleaned = 0.00556907 Jy ! Component: 150 - total flux cleaned = 0.00698378 Jy ! Component: 200 - total flux cleaned = 0.00814023 Jy ! Total flux subtracted in 200 components = 0.00814023 Jy ! Clean residual min=-0.001367 max=0.001724 Jy/beam ! Clean residual mean=0.000000 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0928314 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 0.0928314 Jy ! Inverting map ! Added new window around map position (4.2, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120833 Jy ! Component: 100 - total flux cleaned = 0.00191116 Jy ! Component: 150 - total flux cleaned = 0.00238875 Jy ! Component: 200 - total flux cleaned = 0.00273032 Jy ! Total flux subtracted in 200 components = 0.00273032 Jy ! Clean residual min=-0.001092 max=0.001195 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0955618 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 0.0955618 Jy ! Inverting map ! Added new window around map position (-1, -14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070886 Jy ! Component: 100 - total flux cleaned = 0.000893241 Jy ! Component: 150 - total flux cleaned = 0.000960998 Jy ! Component: 200 - total flux cleaned = 0.00108592 Jy ! Total flux subtracted in 200 components = 0.00108592 Jy ! Clean residual min=-0.001008 max=0.000950 Jy/beam ! Clean residual mean=0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0966477 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 61 components and 0.0966477 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=3.384 mas, bpa=17.23 degrees ! Estimated noise=0.836896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240088 Jy ! Component: 100 - total flux cleaned = 0.00039214 Jy ! Component: 150 - total flux cleaned = 0.00046778 Jy ! Component: 200 - total flux cleaned = 0.000552373 Jy ! Total flux subtracted in 200 components = 0.000552373 Jy ! Clean residual min=-0.000914 max=0.000943 Jy/beam ! Clean residual mean=0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0972001 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124241 Jy ! Component: 100 - total flux cleaned = 0.000209571 Jy ! Component: 150 - total flux cleaned = 0.00030159 Jy ! Component: 200 - total flux cleaned = 0.000326667 Jy ! Total flux subtracted in 200 components = 0.000326667 Jy ! Clean residual min=-0.000865 max=0.000945 Jy/beam ! Clean residual mean=0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0975267 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 96 components and 0.0975267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.082 mas, bpa=1.888 degrees ! Estimated noise=0.663001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170514 Jy ! Component: 100 - total flux cleaned = 0.000169623 Jy ! Component: 150 - total flux cleaned = 9.75818e-05 Jy ! Component: 200 - total flux cleaned = 9.85994e-05 Jy ! Total flux subtracted in 200 components = 9.85994e-05 Jy ! Clean residual min=-0.000874 max=0.000851 Jy/beam ! Clean residual mean=-0.000000 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0976253 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 117 components and 0.0976253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065567Jy sigma=0.451199 ! Fit after self-cal, rms=0.065559Jy sigma=0.451099 wmodel J1539+0534_X_map.mod ! Writing 117 model components to file: J1539+0534_X_map.mod wobs J1539+0534_X_uvs.fits ! Writing UV FITS file: J1539+0534_X_uvs.fits wwins J1539+0534_X_map.win ! wwins: Wrote 9 windows to J1539+0534_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165602 Jy ! Component: 100 - total flux cleaned = -0.000271323 Jy ! Component: 150 - total flux cleaned = -0.00042976 Jy ! Component: 200 - total flux cleaned = -0.000526376 Jy ! Component: 250 - total flux cleaned = -0.000606653 Jy ! Component: 300 - total flux cleaned = -0.000619531 Jy ! Component: 350 - total flux cleaned = -0.000670548 Jy ! Component: 400 - total flux cleaned = -0.000695688 Jy ! Component: 450 - total flux cleaned = -0.000757464 Jy ! Component: 500 - total flux cleaned = -0.000818014 Jy ! Component: 550 - total flux cleaned = -0.000865542 Jy ! Component: 600 - total flux cleaned = -0.000900432 Jy ! Component: 650 - total flux cleaned = -0.000934689 Jy ! Component: 700 - total flux cleaned = -0.000990687 Jy ! Component: 750 - total flux cleaned = -0.00099059 Jy ! Component: 800 - total flux cleaned = -0.000969141 Jy ! Component: 850 - total flux cleaned = -0.00104444 Jy ! Component: 900 - total flux cleaned = -0.0010231 Jy ! Component: 950 - total flux cleaned = -0.00101256 Jy ! Component: 1000 - total flux cleaned = -0.00105381 Jy ! Component: 1050 - total flux cleaned = -0.00103317 Jy ! Component: 1100 - total flux cleaned = -0.0010734 Jy ! Component: 1150 - total flux cleaned = -0.00110308 Jy ! Component: 1200 - total flux cleaned = -0.00115197 Jy ! Component: 1250 - total flux cleaned = -0.00115198 Jy ! Component: 1300 - total flux cleaned = -0.00116162 Jy ! Component: 1350 - total flux cleaned = -0.00117119 Jy ! Component: 1400 - total flux cleaned = -0.00116191 Jy ! Component: 1450 - total flux cleaned = -0.0011248 Jy ! Component: 1500 - total flux cleaned = -0.00113408 Jy ! Component: 1550 - total flux cleaned = -0.00110663 Jy ! Component: 1600 - total flux cleaned = -0.00105264 Jy ! Component: 1650 - total flux cleaned = -0.00107042 Jy ! Component: 1700 - total flux cleaned = -0.00106163 Jy ! Component: 1750 - total flux cleaned = -0.00107032 Jy ! Component: 1800 - total flux cleaned = -0.00101811 Jy ! Component: 1850 - total flux cleaned = -0.00101816 Jy ! Component: 1900 - total flux cleaned = -0.00102661 Jy ! Component: 1950 - total flux cleaned = -0.00101809 Jy ! Component: 2000 - total flux cleaned = -0.00101801 Jy ! Component: 2050 - total flux cleaned = -0.000984653 Jy ! Component: 2100 - total flux cleaned = -0.000984764 Jy ! Component: 2150 - total flux cleaned = -0.000968365 Jy ! Component: 2200 - total flux cleaned = -0.00096029 Jy ! Component: 2250 - total flux cleaned = -0.000936083 Jy ! Component: 2300 - total flux cleaned = -0.000936067 Jy ! Component: 2350 - total flux cleaned = -0.000951959 Jy ! Component: 2400 - total flux cleaned = -0.000912625 Jy ! Component: 2450 - total flux cleaned = -0.00089706 Jy ! Component: 2500 - total flux cleaned = -0.000881548 Jy ! Component: 2550 - total flux cleaned = -0.00083526 Jy ! Component: 2600 - total flux cleaned = -0.000789379 Jy ! Component: 2650 - total flux cleaned = -0.000766582 Jy ! Component: 2700 - total flux cleaned = -0.000721271 Jy ! Component: 2750 - total flux cleaned = -0.000661193 Jy ! Component: 2800 - total flux cleaned = -0.000616635 Jy ! Component: 2850 - total flux cleaned = -0.000564962 Jy ! Component: 2900 - total flux cleaned = -0.000535517 Jy ! Component: 2950 - total flux cleaned = -0.000491747 Jy ! Component: 3000 - total flux cleaned = -0.000448244 Jy ! Component: 3050 - total flux cleaned = -0.00042663 Jy ! Component: 3100 - total flux cleaned = -0.000369485 Jy ! Component: 3150 - total flux cleaned = -0.000355264 Jy ! Component: 3200 - total flux cleaned = -0.000341078 Jy ! Component: 3250 - total flux cleaned = -0.000313041 Jy ! Component: 3300 - total flux cleaned = -0.000264285 Jy ! Component: 3350 - total flux cleaned = -0.000202029 Jy ! Component: 3400 - total flux cleaned = -0.000147031 Jy ! Component: 3450 - total flux cleaned = -8.54501e-05 Jy ! Component: 3500 - total flux cleaned = -5.14683e-05 Jy ! Component: 3550 - total flux cleaned = -1.09663e-05 Jy ! Component: 3600 - total flux cleaned = 1.5892e-05 Jy ! Component: 3650 - total flux cleaned = 6.26185e-05 Jy ! Component: 3700 - total flux cleaned = 8.91285e-05 Jy ! Component: 3750 - total flux cleaned = 0.00012873 Jy ! Component: 3800 - total flux cleaned = 0.000181271 Jy ! Component: 3850 - total flux cleaned = 0.000220466 Jy ! Component: 3900 - total flux cleaned = 0.0002529 Jy ! Component: 3950 - total flux cleaned = 0.000298171 Jy ! Component: 4000 - total flux cleaned = 0.000317503 Jy ! Component: 4050 - total flux cleaned = 0.00039417 Jy ! Total flux subtracted in 4096 components = 0.000413203 Jy ! Clean residual min=-0.000381 max=0.000471 Jy/beam ! Clean residual mean=0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.0980385 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 408 components and 0.0980386 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1539+0534_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.082 at 1.888 degrees (North through East) ! Clean map min=-0.0011149 max=0.0657 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1539+0534_X_map.fits wmodel /image_prod/ug002_uva//J1539+0534_X_map.mod ! Writing 408 model components to file: /image_prod/ug002_uva//J1539+0534_X_map.mod wobs /image_prod/ug002_uva//J1539+0534_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1539+0534_X_uvs.fits wwins /image_prod/ug002_uva//J1539+0534_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J1539+0534_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0656998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000105316 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.480894 0.480894 0.961788 1.92358 3.84715 7.69431 15.3886 30.7772 61.5545 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 623.837 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1539+0534_X_dfm.log closed on Thu Mar 5 02:21:31 2020