! Started logfile: /image_prod/ug002_uva//J1535+1954_S_dfm.log on Thu Mar 5 02:19:24 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1535+1954_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1535+1954_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.85787 visibilities/baseline/integration-bin. ! Found source: J1535+1954 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5559 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1535+1954_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001534Jy sigma=8.287755 ! Fit after self-cal, rms=0.920825Jy sigma=7.591548 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=6.565 mas, bpa=-2.005 degrees ! Estimated noise=1.87151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636189 Jy ! Component: 100 - total flux cleaned = 0.0776173 Jy ! Total flux subtracted in 100 components = 0.0776173 Jy ! Clean residual min=-0.003578 max=0.004367 Jy/beam ! Clean residual mean=-0.000008 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.0776173 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0776173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063539Jy sigma=0.443206 ! Fit after self-cal, rms=0.063444Jy sigma=0.442539 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=7.509 mas, bpa=-3.058 degrees ! Estimated noise=1.19722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479168 Jy ! Component: 100 - total flux cleaned = 0.00676439 Jy ! Component: 150 - total flux cleaned = 0.00722632 Jy ! Component: 200 - total flux cleaned = 0.00759088 Jy ! Total flux subtracted in 200 components = 0.00759088 Jy ! Clean residual min=-0.002660 max=0.002550 Jy/beam ! Clean residual mean=-0.000003 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0852082 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.0852082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063096Jy sigma=0.438806 ! Fit after self-cal, rms=0.063125Jy sigma=0.438760 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 7.509 at -3.058 degrees (North through East) ! Clean map min=-0.0025723 max=0.082068 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.01 KP 1.00 ! LA 0.99 MK 0.99 OV 0.97 PT 0.97 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.95 HN 1.07 KP 0.96 ! LA 1.00 MK 0.98 OV 0.99 PT 1.04 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 1.01 KP 0.97 ! LA 0.98 MK 1.01 OV 0.97 PT 1.01 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.063125Jy sigma=0.438760 ! Fit after self-cal, rms=0.064862Jy sigma=0.437631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.563 mas, bpa=-2.829 degrees ! Estimated noise=1.19269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118149 Jy ! Component: 100 - total flux cleaned = -0.00123929 Jy ! Component: 150 - total flux cleaned = -0.00120007 Jy ! Component: 200 - total flux cleaned = -0.00116533 Jy ! Total flux subtracted in 200 components = -0.00116533 Jy ! Clean residual min=-0.002476 max=0.002404 Jy/beam ! Clean residual mean=0.000001 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0840428 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0840428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064736Jy sigma=0.437281 ! Fit after self-cal, rms=0.064778Jy sigma=0.437241 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064778Jy sigma=0.437241 ! Fit after self-cal, rms=0.068936Jy sigma=0.432138 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=7.546 mas, bpa=-2.506 degrees ! Estimated noise=1.1908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323887 Jy ! Component: 100 - total flux cleaned = -0.000322717 Jy ! Component: 150 - total flux cleaned = -0.000355616 Jy ! Component: 200 - total flux cleaned = -0.000400222 Jy ! Total flux subtracted in 200 components = -0.000400222 Jy ! Clean residual min=-0.001983 max=0.002027 Jy/beam ! Clean residual mean=-0.000002 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0836426 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0836426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068914Jy sigma=0.432066 ! Fit after self-cal, rms=0.069008Jy sigma=0.431926 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111959 Jy ! Component: 100 - total flux cleaned = -0.000112543 Jy ! Component: 150 - total flux cleaned = -0.000126306 Jy ! Component: 200 - total flux cleaned = -0.000149081 Jy ! Total flux subtracted in 200 components = -0.000149081 Jy ! Clean residual min=-0.001973 max=0.002041 Jy/beam ! Clean residual mean=-0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0834935 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0834935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068997Jy sigma=0.431896 ! Fit after self-cal, rms=0.068998Jy sigma=0.431892 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068998Jy sigma=0.431892 ! Fit after self-cal, rms=0.069899Jy sigma=0.431860 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=7.542 mas, bpa=-2.582 degrees ! Estimated noise=1.19139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123448 Jy ! Component: 100 - total flux cleaned = -0.000136995 Jy ! Component: 150 - total flux cleaned = -0.000162289 Jy ! Component: 200 - total flux cleaned = -0.00019755 Jy ! Total flux subtracted in 200 components = -0.00019755 Jy ! Clean residual min=-0.001990 max=0.002035 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.083296 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.083296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069886Jy sigma=0.431824 ! Fit after self-cal, rms=0.069898Jy sigma=0.431817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-69, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012677 Jy ! Component: 100 - total flux cleaned = 0.00126575 Jy ! Component: 150 - total flux cleaned = 0.00126569 Jy ! Component: 200 - total flux cleaned = 0.00129316 Jy ! Total flux subtracted in 200 components = 0.00129316 Jy ! Clean residual min=-0.001902 max=0.001761 Jy/beam ! Clean residual mean=-0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0845892 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.0845891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069841Jy sigma=0.431344 ! Fit after self-cal, rms=0.069833Jy sigma=0.431311 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069833Jy sigma=0.431311 ! Fit after self-cal, rms=0.069958Jy sigma=0.431286 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.962 mas, bmaj=11.72 mas, bpa=-1.629 degrees ! Estimated noise=1.36585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.81692e-05 Jy ! Component: 100 - total flux cleaned = -8.28379e-05 Jy ! Component: 150 - total flux cleaned = -6.18676e-05 Jy ! Component: 200 - total flux cleaned = -2.18616e-05 Jy ! Total flux subtracted in 200 components = -2.18616e-05 Jy ! Clean residual min=-0.002264 max=0.001732 Jy/beam ! Clean residual mean=-0.000007 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0845673 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.0845673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069945Jy sigma=0.431239 ! Fit after self-cal, rms=0.069937Jy sigma=0.431221 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35822e-05 Jy ! Component: 100 - total flux cleaned = 3.6892e-06 Jy ! Component: 150 - total flux cleaned = 1.97302e-05 Jy ! Component: 200 - total flux cleaned = 3.41026e-05 Jy ! Total flux subtracted in 200 components = 3.41026e-05 Jy ! Clean residual min=-0.002248 max=0.001715 Jy/beam ! Clean residual mean=-0.000007 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0846014 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.0846014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069933Jy sigma=0.431233 ! Fit after self-cal, rms=0.069929Jy sigma=0.431223 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=7.535 mas, bpa=-2.663 degrees ! Estimated noise=1.18935 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 7.535 at -2.663 degrees (North through East) ! Clean map min=-0.0019225 max=0.082711 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=6.558 mas, bpa=-1.565 degrees ! Estimated noise=1.85788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0631063 Jy ! Component: 100 - total flux cleaned = 0.0770522 Jy ! Component: 150 - total flux cleaned = 0.0812509 Jy ! Component: 200 - total flux cleaned = 0.0828149 Jy ! Total flux subtracted in 200 components = 0.0828149 Jy ! Clean residual min=-0.002828 max=0.002512 Jy/beam ! Clean residual mean=-0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0828149 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0828149 Jy ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=7.535 mas, bpa=-2.663 degrees ! Estimated noise=1.18935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114962 Jy ! Component: 100 - total flux cleaned = 0.00148727 Jy ! Component: 150 - total flux cleaned = 0.00182368 Jy ! Component: 200 - total flux cleaned = 0.00187062 Jy ! Total flux subtracted in 200 components = 0.00187062 Jy ! Clean residual min=-0.001968 max=0.001936 Jy/beam ! Clean residual mean=-0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0846855 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.0846855 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.962 mas, bmaj=11.72 mas, bpa=-1.629 degrees ! Estimated noise=1.36585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257524 Jy ! Component: 100 - total flux cleaned = -0.000257319 Jy ! Component: 150 - total flux cleaned = -0.000166403 Jy ! Component: 200 - total flux cleaned = -0.000140517 Jy ! Total flux subtracted in 200 components = -0.000140517 Jy ! Clean residual min=-0.002257 max=0.001755 Jy/beam ! Clean residual mean=-0.000007 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.084545 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.80809e-05 Jy ! Component: 100 - total flux cleaned = 0.000112043 Jy ! Component: 150 - total flux cleaned = 0.000130657 Jy ! Component: 200 - total flux cleaned = 0.000164066 Jy ! Total flux subtracted in 200 components = 0.000164066 Jy ! Clean residual min=-0.002216 max=0.001787 Jy/beam ! Clean residual mean=-0.000007 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0847091 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.0847091 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=7.535 mas, bpa=-2.663 degrees ! Estimated noise=1.18935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220391 Jy ! Component: 100 - total flux cleaned = -0.000218807 Jy ! Component: 150 - total flux cleaned = -0.000254422 Jy ! Component: 200 - total flux cleaned = -0.000224281 Jy ! Total flux subtracted in 200 components = -0.000224281 Jy ! Clean residual min=-0.001823 max=0.001800 Jy/beam ! Clean residual mean=-0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0844848 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.0844848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069986Jy sigma=0.431368 ! Fit after self-cal, rms=0.069982Jy sigma=0.431357 wmodel J1535+1954_S_map.mod ! Writing 63 model components to file: J1535+1954_S_map.mod wobs J1535+1954_S_uvs.fits ! Writing UV FITS file: J1535+1954_S_uvs.fits wwins J1535+1954_S_map.win ! wwins: Wrote 2 windows to J1535+1954_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.89367e-05 Jy ! Component: 100 - total flux cleaned = 0.000163391 Jy ! Component: 150 - total flux cleaned = 0.000135058 Jy ! Component: 200 - total flux cleaned = 7.7646e-05 Jy ! Component: 250 - total flux cleaned = -6.1078e-05 Jy ! Component: 300 - total flux cleaned = -0.00014172 Jy ! Component: 350 - total flux cleaned = -0.000193936 Jy ! Component: 400 - total flux cleaned = -0.000294905 Jy ! Component: 450 - total flux cleaned = -0.00031879 Jy ! Component: 500 - total flux cleaned = -0.000342245 Jy ! Component: 550 - total flux cleaned = -0.000390134 Jy ! Component: 600 - total flux cleaned = -0.000413913 Jy ! Component: 650 - total flux cleaned = -0.00055161 Jy ! Component: 700 - total flux cleaned = -0.000619229 Jy ! Component: 750 - total flux cleaned = -0.000730451 Jy ! Component: 800 - total flux cleaned = -0.000817416 Jy ! Component: 850 - total flux cleaned = -0.000860654 Jy ! Component: 900 - total flux cleaned = -0.00100832 Jy ! Component: 950 - total flux cleaned = -0.0010704 Jy ! Component: 1000 - total flux cleaned = -0.00111115 Jy ! Component: 1050 - total flux cleaned = -0.00123208 Jy ! Component: 1100 - total flux cleaned = -0.00121227 Jy ! Component: 1150 - total flux cleaned = -0.00129078 Jy ! Component: 1200 - total flux cleaned = -0.00131021 Jy ! Component: 1250 - total flux cleaned = -0.0013291 Jy ! Component: 1300 - total flux cleaned = -0.00132921 Jy ! Component: 1350 - total flux cleaned = -0.0013669 Jy ! Component: 1400 - total flux cleaned = -0.00140419 Jy ! Component: 1450 - total flux cleaned = -0.0014588 Jy ! Component: 1500 - total flux cleaned = -0.00151279 Jy ! Component: 1550 - total flux cleaned = -0.0015127 Jy ! Component: 1600 - total flux cleaned = -0.00154823 Jy ! Component: 1650 - total flux cleaned = -0.00161809 Jy ! Component: 1700 - total flux cleaned = -0.0015664 Jy ! Component: 1750 - total flux cleaned = -0.00161764 Jy ! Component: 1800 - total flux cleaned = -0.00160073 Jy ! Component: 1850 - total flux cleaned = -0.00163427 Jy ! Component: 1900 - total flux cleaned = -0.001684 Jy ! Component: 1950 - total flux cleaned = -0.0016838 Jy ! Component: 2000 - total flux cleaned = -0.00169987 Jy ! Component: 2050 - total flux cleaned = -0.00176432 Jy ! Component: 2100 - total flux cleaned = -0.0017962 Jy ! Component: 2150 - total flux cleaned = -0.00182794 Jy ! Component: 2200 - total flux cleaned = -0.0018593 Jy ! Component: 2250 - total flux cleaned = -0.00187491 Jy ! Component: 2300 - total flux cleaned = -0.00196767 Jy ! Component: 2350 - total flux cleaned = -0.00198294 Jy ! Component: 2400 - total flux cleaned = -0.00204376 Jy ! Component: 2450 - total flux cleaned = -0.00213412 Jy ! Component: 2500 - total flux cleaned = -0.00214896 Jy ! Component: 2550 - total flux cleaned = -0.00223784 Jy ! Component: 2600 - total flux cleaned = -0.00225247 Jy ! Component: 2650 - total flux cleaned = -0.00229611 Jy ! Component: 2700 - total flux cleaned = -0.00232514 Jy ! Component: 2750 - total flux cleaned = -0.00238271 Jy ! Component: 2800 - total flux cleaned = -0.00239699 Jy ! Component: 2850 - total flux cleaned = -0.00243962 Jy ! Component: 2900 - total flux cleaned = -0.00248186 Jy ! Component: 2950 - total flux cleaned = -0.00253792 Jy ! Component: 3000 - total flux cleaned = -0.00259363 Jy ! Component: 3050 - total flux cleaned = -0.00264877 Jy ! Component: 3100 - total flux cleaned = -0.00268987 Jy ! Component: 3150 - total flux cleaned = -0.00273049 Jy ! Component: 3200 - total flux cleaned = -0.00281149 Jy ! Component: 3250 - total flux cleaned = -0.00287842 Jy ! Component: 3300 - total flux cleaned = -0.00293171 Jy ! Component: 3350 - total flux cleaned = -0.00293181 Jy ! Component: 3400 - total flux cleaned = -0.00299772 Jy ! Component: 3450 - total flux cleaned = -0.00311523 Jy ! Component: 3500 - total flux cleaned = -0.00311505 Jy ! Component: 3550 - total flux cleaned = -0.0031667 Jy ! Component: 3600 - total flux cleaned = -0.00317957 Jy ! Component: 3650 - total flux cleaned = -0.00324341 Jy ! Component: 3700 - total flux cleaned = -0.0032941 Jy ! Component: 3750 - total flux cleaned = -0.00336956 Jy ! Component: 3800 - total flux cleaned = -0.00338203 Jy ! Component: 3850 - total flux cleaned = -0.00343175 Jy ! Component: 3900 - total flux cleaned = -0.00345645 Jy ! Component: 3950 - total flux cleaned = -0.00354242 Jy ! Component: 4000 - total flux cleaned = -0.00355458 Jy ! Component: 4050 - total flux cleaned = -0.00356677 Jy ! Total flux subtracted in 4096 components = -0.00359092 Jy ! Clean residual min=-0.000653 max=0.000660 Jy/beam ! Clean residual mean=0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.0808939 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 341 components and 0.0808939 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1535+1954_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 7.535 at -2.663 degrees (North through East) ! Clean map min=-0.0015745 max=0.082647 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1535+1954_S_map.fits wmodel /image_prod/ug002_uva//J1535+1954_S_map.mod ! Writing 341 model components to file: /image_prod/ug002_uva//J1535+1954_S_map.mod wobs /image_prod/ug002_uva//J1535+1954_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1535+1954_S_uvs.fits wwins /image_prod/ug002_uva//J1535+1954_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1535+1954_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0826473 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214531 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.778721 0.778721 1.55744 3.11488 6.22977 12.4595 24.9191 49.8382 99.6763 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.082 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 385.247 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1535+1954_S_dfm.log closed on Thu Mar 5 02:19:28 2020