! Started logfile: /image_prod/ug002_uva//J1511-3242_S_dfm.log on Thu Mar 5 02:08:56 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1511-3242_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1511-3242_S_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.802222 visibilities/baseline/integration-bin. ! Found source: J1511-3242 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6498 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1511-3242_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.023403Jy sigma=6.097701 ! Fit after self-cal, rms=0.837146Jy sigma=4.910324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.221 mas, bpa=-5.813 degrees ! Estimated noise=2.42794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122053 Jy ! Component: 100 - total flux cleaned = 0.161058 Jy ! Total flux subtracted in 100 components = 0.161058 Jy ! Clean residual min=-0.010702 max=0.020897 Jy/beam ! Clean residual mean=0.000014 rms=0.003260 Jy/beam ! Combined flux in latest and established models = 0.161058 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.161058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099999Jy sigma=0.562084 ! Fit after self-cal, rms=0.099565Jy sigma=0.560618 ! Inverting map ! Added new window around map position (-2.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217172 Jy ! Component: 100 - total flux cleaned = 0.0347575 Jy ! Total flux subtracted in 100 components = 0.0347575 Jy ! Clean residual min=-0.009041 max=0.016088 Jy/beam ! Clean residual mean=0.000056 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.195816 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.195816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092650Jy sigma=0.505933 ! Fit after self-cal, rms=0.092533Jy sigma=0.504924 ! Inverting map ! Added new window around map position (-72, -27). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145148 Jy ! Component: 100 - total flux cleaned = 0.0240916 Jy ! Total flux subtracted in 100 components = 0.0240916 Jy ! Clean residual min=-0.007567 max=0.010028 Jy/beam ! Clean residual mean=0.000045 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.219907 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.219907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089060Jy sigma=0.477617 ! Fit after self-cal, rms=0.088898Jy sigma=0.476987 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=7.809 mas, bpa=-4.826 degrees ! Estimated noise=1.5314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143195 Jy ! Component: 100 - total flux cleaned = 0.0245036 Jy ! Component: 150 - total flux cleaned = 0.0319654 Jy ! Component: 200 - total flux cleaned = 0.0375157 Jy ! Total flux subtracted in 200 components = 0.0375157 Jy ! Clean residual min=-0.007398 max=0.010552 Jy/beam ! Clean residual mean=0.000070 rms=0.002322 Jy/beam ! Combined flux in latest and established models = 0.257423 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 73 components and 0.257423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086339Jy sigma=0.453918 ! Fit after self-cal, rms=0.086175Jy sigma=0.452894 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.081 x 7.809 at -4.826 degrees (North through East) ! Clean map min=-0.0072148 max=0.16407 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.12 KP 0.93 ! LA 0.99 MK 0.98 NL 1.08 OV 0.96 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.09 KP 0.94 ! LA 1.01 MK 1.05 NL 1.06 OV 0.92 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.28 KP 0.94 ! LA 0.98 MK 0.98 NL 1.09 OV 0.89 ! PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.086175Jy sigma=0.452894 ! Fit after self-cal, rms=0.087923Jy sigma=0.445055 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=7.825 mas, bpa=-4.464 degrees ! Estimated noise=1.51296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62.5, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102518 Jy ! Component: 100 - total flux cleaned = 0.0153485 Jy ! Component: 150 - total flux cleaned = 0.0183698 Jy ! Component: 200 - total flux cleaned = 0.0205865 Jy ! Total flux subtracted in 200 components = 0.0205865 Jy ! Clean residual min=-0.005253 max=0.006189 Jy/beam ! Clean residual mean=0.000030 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.278009 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 116 components and 0.27801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086866Jy sigma=0.436023 ! Fit after self-cal, rms=0.086931Jy sigma=0.435517 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086931Jy sigma=0.435517 ! Fit after self-cal, rms=0.087979Jy sigma=0.430333 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.908 mas, bpa=-4.386 degrees ! Estimated noise=1.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190361 Jy ! Component: 100 - total flux cleaned = 0.00280741 Jy ! Component: 150 - total flux cleaned = 0.00303983 Jy ! Component: 200 - total flux cleaned = 0.00314463 Jy ! Total flux subtracted in 200 components = 0.00314463 Jy ! Clean residual min=-0.004414 max=0.004158 Jy/beam ! Clean residual mean=0.000015 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.281154 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.281154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087844Jy sigma=0.429566 ! Fit after self-cal, rms=0.087893Jy sigma=0.429480 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302029 Jy ! Component: 100 - total flux cleaned = 0.000303004 Jy ! Component: 150 - total flux cleaned = 0.000303549 Jy ! Component: 200 - total flux cleaned = 0.000346255 Jy ! Total flux subtracted in 200 components = 0.000346255 Jy ! Clean residual min=-0.004238 max=0.004111 Jy/beam ! Clean residual mean=0.000013 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.2815 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 144 components and 0.2815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087831Jy sigma=0.429239 ! Fit after self-cal, rms=0.087828Jy sigma=0.429223 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087828Jy sigma=0.429223 ! Fit after self-cal, rms=0.088285Jy sigma=0.429046 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.91 mas, bpa=-4.358 degrees ! Estimated noise=1.50374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000586326 Jy ! Component: 100 - total flux cleaned = -0.000541768 Jy ! Component: 150 - total flux cleaned = -0.000539945 Jy ! Component: 200 - total flux cleaned = -0.00050009 Jy ! Total flux subtracted in 200 components = -0.00050009 Jy ! Clean residual min=-0.004042 max=0.003917 Jy/beam ! Clean residual mean=0.000011 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.281 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 0.281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088218Jy sigma=0.428817 ! Fit after self-cal, rms=0.088225Jy sigma=0.428796 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.88262e-05 Jy ! Component: 100 - total flux cleaned = -5.8217e-05 Jy ! Component: 150 - total flux cleaned = -2.20779e-05 Jy ! Component: 200 - total flux cleaned = 1.28233e-05 Jy ! Total flux subtracted in 200 components = 1.28233e-05 Jy ! Clean residual min=-0.003904 max=0.003902 Jy/beam ! Clean residual mean=0.000010 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.281013 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 157 components and 0.281013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088183Jy sigma=0.428657 ! Fit after self-cal, rms=0.088181Jy sigma=0.428648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088181Jy sigma=0.428648 ! Fit after self-cal, rms=0.088365Jy sigma=0.428603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.549 mas, bmaj=21.81 mas, bpa=-1.037 degrees ! Estimated noise=1.85381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000838226 Jy ! Component: 100 - total flux cleaned = 0.000908595 Jy ! Component: 150 - total flux cleaned = 0.000942518 Jy ! Component: 200 - total flux cleaned = 0.000974449 Jy ! Total flux subtracted in 200 components = 0.000974449 Jy ! Clean residual min=-0.005489 max=0.005292 Jy/beam ! Clean residual mean=0.000019 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.281988 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 168 components and 0.281988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088353Jy sigma=0.428565 ! Fit after self-cal, rms=0.088360Jy sigma=0.428554 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110414 Jy ! Component: 100 - total flux cleaned = 8.03605e-05 Jy ! Component: 150 - total flux cleaned = 8.17977e-05 Jy ! Component: 200 - total flux cleaned = 5.28178e-05 Jy ! Total flux subtracted in 200 components = 5.28178e-05 Jy ! Clean residual min=-0.005472 max=0.005252 Jy/beam ! Clean residual mean=0.000019 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.28204 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 170 components and 0.28204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088349Jy sigma=0.428544 ! Fit after self-cal, rms=0.088348Jy sigma=0.428541 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.906 mas, bpa=-4.333 degrees ! Estimated noise=1.50006 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.906 at -4.333 degrees (North through East) ! Clean map min=-0.003656 max=0.16226 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=6.281 mas, bpa=-5.308 degrees ! Estimated noise=2.40279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120532 Jy ! Component: 100 - total flux cleaned = 0.160136 Jy ! Component: 150 - total flux cleaned = 0.181751 Jy ! Component: 200 - total flux cleaned = 0.196862 Jy ! Total flux subtracted in 200 components = 0.196862 Jy ! Clean residual min=-0.007269 max=0.009447 Jy/beam ! Clean residual mean=0.000032 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 0.196862 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.196862 Jy ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.906 mas, bpa=-4.333 degrees ! Estimated noise=1.50006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188418 Jy ! Component: 100 - total flux cleaned = 0.0327536 Jy ! Component: 150 - total flux cleaned = 0.0434237 Jy ! Component: 200 - total flux cleaned = 0.0518167 Jy ! Total flux subtracted in 200 components = 0.0518167 Jy ! Clean residual min=-0.005089 max=0.005656 Jy/beam ! Clean residual mean=0.000035 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.248679 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 82 components and 0.248679 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.549 mas, bmaj=21.81 mas, bpa=-1.037 degrees ! Estimated noise=1.85381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114785 Jy ! Component: 100 - total flux cleaned = 0.0188873 Jy ! Component: 150 - total flux cleaned = 0.0237823 Jy ! Component: 200 - total flux cleaned = 0.027071 Jy ! Total flux subtracted in 200 components = 0.027071 Jy ! Clean residual min=-0.004950 max=0.005366 Jy/beam ! Clean residual mean=0.000023 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.27575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223922 Jy ! Component: 100 - total flux cleaned = 0.00377363 Jy ! Component: 150 - total flux cleaned = 0.00482963 Jy ! Component: 200 - total flux cleaned = 0.00529881 Jy ! Total flux subtracted in 200 components = 0.00529881 Jy ! Clean residual min=-0.005247 max=0.005377 Jy/beam ! Clean residual mean=0.000016 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.281049 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 127 components and 0.281049 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.906 mas, bpa=-4.333 degrees ! Estimated noise=1.50006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849147 Jy ! Component: 100 - total flux cleaned = -0.00113454 Jy ! Component: 150 - total flux cleaned = -0.00119461 Jy ! Component: 200 - total flux cleaned = -0.00119349 Jy ! Total flux subtracted in 200 components = -0.00119349 Jy ! Clean residual min=-0.003848 max=0.004076 Jy/beam ! Clean residual mean=0.000006 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.279855 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 145 components and 0.279855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088339Jy sigma=0.429010 ! Fit after self-cal, rms=0.088315Jy sigma=0.428934 wmodel J1511-3242_S_map.mod ! Writing 145 model components to file: J1511-3242_S_map.mod wobs J1511-3242_S_uvs.fits ! Writing UV FITS file: J1511-3242_S_uvs.fits wwins J1511-3242_S_map.win ! wwins: Wrote 4 windows to J1511-3242_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744016 Jy ! Component: 100 - total flux cleaned = 0.00126763 Jy ! Component: 150 - total flux cleaned = 0.00175328 Jy ! Component: 200 - total flux cleaned = 0.00221324 Jy ! Component: 250 - total flux cleaned = 0.00253829 Jy ! Component: 300 - total flux cleaned = 0.0026939 Jy ! Component: 350 - total flux cleaned = 0.00304193 Jy ! Component: 400 - total flux cleaned = 0.00318424 Jy ! Component: 450 - total flux cleaned = 0.0033687 Jy ! Component: 500 - total flux cleaned = 0.00363573 Jy ! Component: 550 - total flux cleaned = 0.00380789 Jy ! Component: 600 - total flux cleaned = 0.0041011 Jy ! Component: 650 - total flux cleaned = 0.00434495 Jy ! Component: 700 - total flux cleaned = 0.00446337 Jy ! Component: 750 - total flux cleaned = 0.00465654 Jy ! Component: 800 - total flux cleaned = 0.00491957 Jy ! Component: 850 - total flux cleaned = 0.00499176 Jy ! Component: 900 - total flux cleaned = 0.00517069 Jy ! Component: 950 - total flux cleaned = 0.00513676 Jy ! Component: 1000 - total flux cleaned = 0.00527382 Jy ! Component: 1050 - total flux cleaned = 0.00540689 Jy ! Component: 1100 - total flux cleaned = 0.00547165 Jy ! Component: 1150 - total flux cleaned = 0.0055356 Jy ! Component: 1200 - total flux cleaned = 0.00566033 Jy ! Component: 1250 - total flux cleaned = 0.00578225 Jy ! Component: 1300 - total flux cleaned = 0.00587188 Jy ! Component: 1350 - total flux cleaned = 0.00596014 Jy ! Component: 1400 - total flux cleaned = 0.00601831 Jy ! Component: 1450 - total flux cleaned = 0.00607543 Jy ! Component: 1500 - total flux cleaned = 0.00618668 Jy ! Component: 1550 - total flux cleaned = 0.00626885 Jy ! Component: 1600 - total flux cleaned = 0.00632261 Jy ! Component: 1650 - total flux cleaned = 0.00632273 Jy ! Component: 1700 - total flux cleaned = 0.00640142 Jy ! Component: 1750 - total flux cleaned = 0.00642722 Jy ! Component: 1800 - total flux cleaned = 0.00647812 Jy ! Component: 1850 - total flux cleaned = 0.0064285 Jy ! Component: 1900 - total flux cleaned = 0.00647774 Jy ! Component: 1950 - total flux cleaned = 0.00652623 Jy ! Component: 2000 - total flux cleaned = 0.00650182 Jy ! Component: 2050 - total flux cleaned = 0.00657259 Jy ! Component: 2100 - total flux cleaned = 0.00657255 Jy ! Component: 2150 - total flux cleaned = 0.00652626 Jy ! Component: 2200 - total flux cleaned = 0.00657206 Jy ! Component: 2250 - total flux cleaned = 0.00654946 Jy ! Component: 2300 - total flux cleaned = 0.00654986 Jy ! Component: 2350 - total flux cleaned = 0.00666018 Jy ! Component: 2400 - total flux cleaned = 0.00668176 Jy ! Component: 2450 - total flux cleaned = 0.00672501 Jy ! Component: 2500 - total flux cleaned = 0.00676797 Jy ! Component: 2550 - total flux cleaned = 0.00681011 Jy ! Component: 2600 - total flux cleaned = 0.00687318 Jy ! Component: 2650 - total flux cleaned = 0.00695606 Jy ! Component: 2700 - total flux cleaned = 0.00697657 Jy ! Component: 2750 - total flux cleaned = 0.00707789 Jy ! Component: 2800 - total flux cleaned = 0.00709787 Jy ! Component: 2850 - total flux cleaned = 0.0071775 Jy ! Component: 2900 - total flux cleaned = 0.00725609 Jy ! Component: 2950 - total flux cleaned = 0.00729491 Jy ! Component: 3000 - total flux cleaned = 0.00733358 Jy ! Component: 3050 - total flux cleaned = 0.00739128 Jy ! Component: 3100 - total flux cleaned = 0.00739132 Jy ! Component: 3150 - total flux cleaned = 0.00744811 Jy ! Component: 3200 - total flux cleaned = 0.00746686 Jy ! Component: 3250 - total flux cleaned = 0.0074669 Jy ! Component: 3300 - total flux cleaned = 0.00754075 Jy ! Component: 3350 - total flux cleaned = 0.00754091 Jy ! Component: 3400 - total flux cleaned = 0.00754109 Jy ! Component: 3450 - total flux cleaned = 0.00757725 Jy ! Component: 3500 - total flux cleaned = 0.00761319 Jy ! Component: 3550 - total flux cleaned = 0.00763102 Jy ! Component: 3600 - total flux cleaned = 0.00770193 Jy ! Component: 3650 - total flux cleaned = 0.00770197 Jy ! Component: 3700 - total flux cleaned = 0.00771951 Jy ! Component: 3750 - total flux cleaned = 0.0077718 Jy ! Component: 3800 - total flux cleaned = 0.00780636 Jy ! Component: 3850 - total flux cleaned = 0.00784076 Jy ! Component: 3900 - total flux cleaned = 0.00784083 Jy ! Component: 3950 - total flux cleaned = 0.00789202 Jy ! Component: 4000 - total flux cleaned = 0.00797675 Jy ! Component: 4050 - total flux cleaned = 0.00801035 Jy ! Total flux subtracted in 4096 components = 0.00807736 Jy ! Clean residual min=-0.001043 max=0.001081 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.287933 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 424 components and 0.287933 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1511-3242_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.906 at -4.333 degrees (North through East) ! Clean map min=-0.0022487 max=0.16314 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1511-3242_S_map.fits wmodel /image_prod/ug002_uva//J1511-3242_S_map.mod ! Writing 424 model components to file: /image_prod/ug002_uva//J1511-3242_S_map.mod wobs /image_prod/ug002_uva//J1511-3242_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1511-3242_S_uvs.fits wwins /image_prod/ug002_uva//J1511-3242_S_map.win ! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1511-3242_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.163139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000289209 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.531832 0.531832 1.06366 2.12733 4.25465 8.50931 17.0186 34.0372 68.0745 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.163 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 564.088 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1511-3242_S_dfm.log closed on Thu Mar 5 02:08:59 2020