! Started logfile: /image_prod/ug002_uva//J1511+0518_S_dfm.log on Thu Mar 5 02:08:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1511+0518_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1511+0518_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.959722 visibilities/baseline/integration-bin. ! Found source: J1511+0518 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 6219 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1511+0518_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.054762Jy sigma=7.630752 ! Fit after self-cal, rms=0.659223Jy sigma=4.786458 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.109 mas, bpa=-5.443 degrees ! Estimated noise=1.78449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.262206 Jy ! Component: 100 - total flux cleaned = 0.327631 Jy ! Total flux subtracted in 100 components = 0.327631 Jy ! Clean residual min=-0.009718 max=0.026088 Jy/beam ! Clean residual mean=0.000016 rms=0.002965 Jy/beam ! Combined flux in latest and established models = 0.327631 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.327631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108698Jy sigma=0.577878 ! Fit after self-cal, rms=0.108726Jy sigma=0.577658 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264891 Jy ! Component: 100 - total flux cleaned = 0.0383431 Jy ! Total flux subtracted in 100 components = 0.0383431 Jy ! Clean residual min=-0.009430 max=0.012510 Jy/beam ! Clean residual mean=0.000004 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.365974 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.365974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100367Jy sigma=0.521556 ! Fit after self-cal, rms=0.100381Jy sigma=0.521435 ! Inverting map ! Added new window around map position (5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789763 Jy ! Component: 100 - total flux cleaned = 0.0105447 Jy ! Total flux subtracted in 100 components = 0.0105447 Jy ! Clean residual min=-0.009228 max=0.007671 Jy/beam ! Clean residual mean=0.000000 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.376518 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.376518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098584Jy sigma=0.511210 ! Fit after self-cal, rms=0.098450Jy sigma=0.510540 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=7.737 mas, bpa=-4.617 degrees ! Estimated noise=1.29322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500893 Jy ! Component: 100 - total flux cleaned = 0.00520543 Jy ! Component: 150 - total flux cleaned = 0.00488204 Jy ! Component: 200 - total flux cleaned = 0.00473579 Jy ! Total flux subtracted in 200 components = 0.00473579 Jy ! Clean residual min=-0.009187 max=0.007868 Jy/beam ! Clean residual mean=-0.000006 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.381254 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.381254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097359Jy sigma=0.506359 ! Fit after self-cal, rms=0.097310Jy sigma=0.506062 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 7.737 at -4.617 degrees (North through East) ! Clean map min=-0.0087549 max=0.34197 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.98 KP 1.00 ! LA 1.04 MK 1.00 NL 0.99 OV 1.02 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 0.98 KP 0.99 ! LA 1.03 MK 1.00 NL 0.96 OV 0.97 ! SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.03 HN 1.19 KP 0.98 ! LA 1.02 MK 0.97 NL 0.97 OV 0.99 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.097310Jy sigma=0.506062 ! Fit after self-cal, rms=0.087594Jy sigma=0.479724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.715 mas, bpa=-4.691 degrees ! Estimated noise=1.29317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256896 Jy ! Component: 100 - total flux cleaned = 0.00257135 Jy ! Component: 150 - total flux cleaned = 0.00256779 Jy ! Component: 200 - total flux cleaned = 0.00262875 Jy ! Total flux subtracted in 200 components = 0.00262875 Jy ! Clean residual min=-0.005940 max=0.005917 Jy/beam ! Clean residual mean=0.000001 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.383883 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.383883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087351Jy sigma=0.478825 ! Fit after self-cal, rms=0.087330Jy sigma=0.478735 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087330Jy sigma=0.478735 ! Fit after self-cal, rms=0.080719Jy sigma=0.448152 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.743 mas, bpa=-4.589 degrees ! Estimated noise=1.30316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398118 Jy ! Component: 100 - total flux cleaned = 0.00506787 Jy ! Component: 150 - total flux cleaned = 0.00500871 Jy ! Component: 200 - total flux cleaned = 0.00489846 Jy ! Total flux subtracted in 200 components = 0.00489846 Jy ! Clean residual min=-0.004352 max=0.004182 Jy/beam ! Clean residual mean=0.000002 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.388781 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.388781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080432Jy sigma=0.446711 ! Fit after self-cal, rms=0.080426Jy sigma=0.446571 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432893 Jy ! Component: 100 - total flux cleaned = 0.000193661 Jy ! Component: 150 - total flux cleaned = 1.81768e-05 Jy ! Component: 200 - total flux cleaned = -0.000144984 Jy ! Total flux subtracted in 200 components = -0.000144984 Jy ! Clean residual min=-0.004323 max=0.004179 Jy/beam ! Clean residual mean=0.000002 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.388636 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.388636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080354Jy sigma=0.446249 ! Fit after self-cal, rms=0.080351Jy sigma=0.446228 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080351Jy sigma=0.446228 ! Fit after self-cal, rms=0.072709Jy sigma=0.422056 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=7.73 mas, bpa=-4.563 degrees ! Estimated noise=1.30126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014324 Jy ! Component: 100 - total flux cleaned = 0.00143893 Jy ! Component: 150 - total flux cleaned = 0.00143774 Jy ! Component: 200 - total flux cleaned = 0.00143703 Jy ! Total flux subtracted in 200 components = 0.00143703 Jy ! Clean residual min=-0.002666 max=0.002473 Jy/beam ! Clean residual mean=0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.390073 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 96 components and 0.390073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072590Jy sigma=0.421235 ! Fit after self-cal, rms=0.072584Jy sigma=0.421079 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147971 Jy ! Component: 100 - total flux cleaned = 0.000180621 Jy ! Component: 150 - total flux cleaned = 0.000276949 Jy ! Component: 200 - total flux cleaned = 0.000275679 Jy ! Total flux subtracted in 200 components = 0.000275679 Jy ! Clean residual min=-0.002629 max=0.002396 Jy/beam ! Clean residual mean=0.000002 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.390349 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.390349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072556Jy sigma=0.420906 ! Fit after self-cal, rms=0.072554Jy sigma=0.420871 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072554Jy sigma=0.420871 ! Fit after self-cal, rms=0.072473Jy sigma=0.420603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.124 mas, bmaj=11.18 mas, bpa=-3.86 degrees ! Estimated noise=1.52895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000997937 Jy ! Component: 100 - total flux cleaned = 0.0010112 Jy ! Component: 150 - total flux cleaned = 0.0010239 Jy ! Component: 200 - total flux cleaned = 0.00103606 Jy ! Total flux subtracted in 200 components = 0.00103606 Jy ! Clean residual min=-0.003285 max=0.002440 Jy/beam ! Clean residual mean=0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.391385 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 120 components and 0.391385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072455Jy sigma=0.420499 ! Fit after self-cal, rms=0.072453Jy sigma=0.420451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130695 Jy ! Component: 100 - total flux cleaned = 0.000163617 Jy ! Component: 150 - total flux cleaned = 0.000176124 Jy ! Component: 200 - total flux cleaned = 0.00017593 Jy ! Total flux subtracted in 200 components = 0.00017593 Jy ! Clean residual min=-0.003262 max=0.002430 Jy/beam ! Clean residual mean=0.000003 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.391561 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 135 components and 0.391561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072445Jy sigma=0.420421 ! Fit after self-cal, rms=0.072445Jy sigma=0.420406 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.726 mas, bpa=-4.481 degrees ! Estimated noise=1.30219 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 7.726 at -4.481 degrees (North through East) ! Clean map min=-0.0026123 max=0.3445 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.079 mas, bpa=-5.181 degrees ! Estimated noise=1.79115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263039 Jy ! Component: 100 - total flux cleaned = 0.328088 Jy ! Component: 150 - total flux cleaned = 0.356279 Jy ! Component: 200 - total flux cleaned = 0.372683 Jy ! Total flux subtracted in 200 components = 0.372683 Jy ! Clean residual min=-0.004678 max=0.008278 Jy/beam ! Clean residual mean=0.000009 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.372683 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.372683 Jy ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.726 mas, bpa=-4.481 degrees ! Estimated noise=1.30219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110058 Jy ! Component: 100 - total flux cleaned = 0.0167806 Jy ! Component: 150 - total flux cleaned = 0.0192802 Jy ! Component: 200 - total flux cleaned = 0.0197364 Jy ! Total flux subtracted in 200 components = 0.0197364 Jy ! Clean residual min=-0.002580 max=0.002475 Jy/beam ! Clean residual mean=0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.392419 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.39242 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.124 mas, bmaj=11.18 mas, bpa=-3.86 degrees ! Estimated noise=1.52895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692702 Jy ! Component: 100 - total flux cleaned = 0.000531888 Jy ! Component: 150 - total flux cleaned = 0.000428859 Jy ! Component: 200 - total flux cleaned = 0.00033513 Jy ! Total flux subtracted in 200 components = 0.00033513 Jy ! Clean residual min=-0.003240 max=0.002421 Jy/beam ! Clean residual mean=0.000003 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.392755 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111955 Jy ! Component: 100 - total flux cleaned = -0.000186819 Jy ! Component: 150 - total flux cleaned = -0.000254529 Jy ! Component: 200 - total flux cleaned = -0.000316419 Jy ! Total flux subtracted in 200 components = -0.000316419 Jy ! Clean residual min=-0.003271 max=0.002366 Jy/beam ! Clean residual mean=0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.392438 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.392438 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.726 mas, bpa=-4.481 degrees ! Estimated noise=1.30219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319893 Jy ! Component: 100 - total flux cleaned = 0.000184111 Jy ! Component: 150 - total flux cleaned = 9.99462e-05 Jy ! Component: 200 - total flux cleaned = 2.44199e-05 Jy ! Total flux subtracted in 200 components = 2.44199e-05 Jy ! Clean residual min=-0.002608 max=0.002395 Jy/beam ! Clean residual mean=0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.392463 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.392463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072484Jy sigma=0.420635 ! Fit after self-cal, rms=0.072473Jy sigma=0.420594 wmodel J1511+0518_S_map.mod ! Writing 57 model components to file: J1511+0518_S_map.mod wobs J1511+0518_S_uvs.fits ! Writing UV FITS file: J1511+0518_S_uvs.fits wwins J1511+0518_S_map.win ! wwins: Wrote 2 windows to J1511+0518_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434032 Jy ! Component: 100 - total flux cleaned = -0.000352043 Jy ! Component: 150 - total flux cleaned = -0.000577887 Jy ! Component: 200 - total flux cleaned = -0.000794596 Jy ! Component: 250 - total flux cleaned = -0.00104112 Jy ! Component: 300 - total flux cleaned = -0.00124656 Jy ! Component: 350 - total flux cleaned = -0.0014814 Jy ! Component: 400 - total flux cleaned = -0.00174364 Jy ! Component: 450 - total flux cleaned = -0.00193657 Jy ! Component: 500 - total flux cleaned = -0.00218858 Jy ! Component: 550 - total flux cleaned = -0.00234335 Jy ! Component: 600 - total flux cleaned = -0.00249466 Jy ! Component: 650 - total flux cleaned = -0.00261421 Jy ! Component: 700 - total flux cleaned = -0.00276047 Jy ! Component: 750 - total flux cleaned = -0.00287577 Jy ! Component: 800 - total flux cleaned = -0.00304587 Jy ! Component: 850 - total flux cleaned = -0.00321295 Jy ! Component: 900 - total flux cleaned = -0.00334999 Jy ! Component: 950 - total flux cleaned = -0.00348541 Jy ! Component: 1000 - total flux cleaned = -0.00356527 Jy ! Component: 1050 - total flux cleaned = -0.00377484 Jy ! Component: 1100 - total flux cleaned = -0.003826 Jy ! Component: 1150 - total flux cleaned = -0.00387696 Jy ! Component: 1200 - total flux cleaned = -0.00397706 Jy ! Component: 1250 - total flux cleaned = -0.00410081 Jy ! Component: 1300 - total flux cleaned = -0.00417415 Jy ! Component: 1350 - total flux cleaned = -0.00431853 Jy ! Component: 1400 - total flux cleaned = -0.00438908 Jy ! Component: 1450 - total flux cleaned = -0.00443601 Jy ! Component: 1500 - total flux cleaned = -0.00448229 Jy ! Component: 1550 - total flux cleaned = -0.00455126 Jy ! Component: 1600 - total flux cleaned = -0.00459636 Jy ! Component: 1650 - total flux cleaned = -0.00457413 Jy ! Component: 1700 - total flux cleaned = -0.00464048 Jy ! Component: 1750 - total flux cleaned = -0.00466238 Jy ! Component: 1800 - total flux cleaned = -0.00479163 Jy ! Component: 1850 - total flux cleaned = -0.00474889 Jy ! Component: 1900 - total flux cleaned = -0.00479125 Jy ! Component: 1950 - total flux cleaned = -0.00483321 Jy ! Component: 2000 - total flux cleaned = -0.00483307 Jy ! Component: 2050 - total flux cleaned = -0.00477171 Jy ! Component: 2100 - total flux cleaned = -0.00479211 Jy ! Component: 2150 - total flux cleaned = -0.00475186 Jy ! Component: 2200 - total flux cleaned = -0.00473202 Jy ! Component: 2250 - total flux cleaned = -0.00463393 Jy ! Component: 2300 - total flux cleaned = -0.00463423 Jy ! Component: 2350 - total flux cleaned = -0.00461485 Jy ! Component: 2400 - total flux cleaned = -0.00457679 Jy ! Component: 2450 - total flux cleaned = -0.00457676 Jy ! Component: 2500 - total flux cleaned = -0.00446431 Jy ! Component: 2550 - total flux cleaned = -0.00440852 Jy ! Component: 2600 - total flux cleaned = -0.00440883 Jy ! Component: 2650 - total flux cleaned = -0.00429894 Jy ! Component: 2700 - total flux cleaned = -0.00417216 Jy ! Component: 2750 - total flux cleaned = -0.00409999 Jy ! Component: 2800 - total flux cleaned = -0.00404634 Jy ! Component: 2850 - total flux cleaned = -0.00394004 Jy ! Component: 2900 - total flux cleaned = -0.00383464 Jy ! Component: 2950 - total flux cleaned = -0.00369537 Jy ! Component: 3000 - total flux cleaned = -0.00357439 Jy ! Component: 3050 - total flux cleaned = -0.00343747 Jy ! Component: 3100 - total flux cleaned = -0.00342068 Jy ! Component: 3150 - total flux cleaned = -0.00328557 Jy ! Component: 3200 - total flux cleaned = -0.00323537 Jy ! Component: 3250 - total flux cleaned = -0.00313559 Jy ! Component: 3300 - total flux cleaned = -0.00313562 Jy ! Component: 3350 - total flux cleaned = -0.00310274 Jy ! Component: 3400 - total flux cleaned = -0.00292362 Jy ! Component: 3450 - total flux cleaned = -0.00289155 Jy ! Component: 3500 - total flux cleaned = -0.00282709 Jy ! Component: 3550 - total flux cleaned = -0.00266783 Jy ! Component: 3600 - total flux cleaned = -0.00263612 Jy ! Component: 3650 - total flux cleaned = -0.00252609 Jy ! Component: 3700 - total flux cleaned = -0.00237028 Jy ! Component: 3750 - total flux cleaned = -0.00233928 Jy ! Component: 3800 - total flux cleaned = -0.00223184 Jy ! Component: 3850 - total flux cleaned = -0.00215547 Jy ! Component: 3900 - total flux cleaned = -0.00207954 Jy ! Component: 3950 - total flux cleaned = -0.001974 Jy ! Component: 4000 - total flux cleaned = -0.00188409 Jy ! Component: 4050 - total flux cleaned = -0.00183955 Jy ! Total flux subtracted in 4096 components = -0.00175085 Jy ! Clean residual min=-0.000808 max=0.001053 Jy/beam ! Clean residual mean=0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.390712 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 333 components and 0.390712 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1511+0518_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 7.726 at -4.481 degrees (North through East) ! Clean map min=-0.0015019 max=0.34375 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1511+0518_S_map.fits wmodel /image_prod/ug002_uva//J1511+0518_S_map.mod ! Writing 333 model components to file: /image_prod/ug002_uva//J1511+0518_S_map.mod wobs /image_prod/ug002_uva//J1511+0518_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1511+0518_S_uvs.fits wwins /image_prod/ug002_uva//J1511+0518_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1511+0518_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.34375 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000265642 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.231833 0.231833 0.463666 0.927333 1.85467 3.70933 7.41866 14.8373 29.6746 59.3493 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.343 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1294.03 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1511+0518_S_dfm.log closed on Thu Mar 5 02:08:36 2020