! Started logfile: /image_prod/ug002_uva//J1507+5857_X_b_dfm.log on Thu Mar 5 02:05:46 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1507+5857_X_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1507+5857_X_b_uva.fits ! AN table 1: 180 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.93321 visibilities/baseline/integration-bin. ! Found source: J1507+5857 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 90708 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1507+5857_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002378Jy sigma=9.049673 ! Fit after self-cal, rms=0.974534Jy sigma=8.794908 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7179 mas, bmaj=0.9129 mas, bpa=-25.89 degrees ! Estimated noise=0.71828 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192084 Jy ! Component: 100 - total flux cleaned = 0.0236936 Jy ! Total flux subtracted in 100 components = 0.0236936 Jy ! Clean residual min=-0.001888 max=0.002620 Jy/beam ! Clean residual mean=0.000034 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0236936 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0236936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059531Jy sigma=0.504367 ! Fit after self-cal, rms=0.057989Jy sigma=0.489777 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456832 Jy ! Component: 100 - total flux cleaned = 0.0066988 Jy ! Total flux subtracted in 100 components = 0.0066988 Jy ! Clean residual min=-0.001976 max=0.002399 Jy/beam ! Clean residual mean=0.000034 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0303924 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 0.0303924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057411Jy sigma=0.484001 ! Fit after self-cal, rms=0.057395Jy sigma=0.483825 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=1.237 mas, bpa=-23.37 degrees ! Estimated noise=0.264777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368437 Jy ! Component: 100 - total flux cleaned = 0.00579015 Jy ! Component: 150 - total flux cleaned = 0.00701054 Jy ! Component: 200 - total flux cleaned = 0.00771786 Jy ! Total flux subtracted in 200 components = 0.00771786 Jy ! Clean residual min=-0.002608 max=0.003586 Jy/beam ! Clean residual mean=0.000084 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.0381103 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0381103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057175Jy sigma=0.481434 ! Fit after self-cal, rms=0.057148Jy sigma=0.480994 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.007 x 1.237 at -23.37 degrees (North through East) ! Clean map min=-0.0025239 max=0.029405 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.02 HN 1.09 KP 1.02 ! LA 0.81 MK 1.42 NL 1.34 OV 1.33 ! PT 0.66 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.07 HN 1.04 KP 0.98 ! LA 0.80 MK 1.48 NL 1.30 OV 1.36 ! PT 0.65 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.06 HN 1.05 KP 0.98 ! LA 0.84 MK 1.32 NL 1.25 OV 1.26 ! PT 0.67 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.04 HN 1.00 KP 0.98 ! LA 0.87 MK 1.30 NL 1.23 OV 1.32 ! PT 0.70 SC 1.12 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.09 HN 0.99 KP 1.02 ! LA 0.83 MK 1.35 NL 1.24 OV 1.30 ! PT 0.68 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.03 HN 0.96 KP 1.00 ! LA 0.84 MK 1.24 NL 1.17 OV 1.35 ! PT 0.73 SC 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.04 HN 0.92 KP 1.01 ! LA 0.86 MK 1.16 NL 1.14 OV 1.32 ! PT 0.69 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.01 HN 0.91 KP 1.05 ! LA 0.88 MK 1.20 NL 1.06 OV 1.22 ! PT 0.74 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.02 HN 0.93 KP 1.08 ! LA 0.88 MK 1.11 NL 0.99 OV 1.24 ! PT 0.71 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.01 HN 0.89 KP 1.00 ! LA 0.84 MK 1.08 NL 1.13 OV 1.29 ! PT 0.72 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.01 HN 0.87 KP 1.03 ! LA 0.90 MK 1.02 NL 0.96 OV 1.20 ! PT 0.73 SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 0.83 KP 1.03 ! LA 0.89 MK 0.92 NL 0.97 OV 1.25 ! PT 0.70 SC 0.91 ! ! ! Fit before self-cal, rms=0.057148Jy sigma=0.480994 ! Fit after self-cal, rms=0.062344Jy sigma=0.475671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.272 mas, bpa=-22.2 degrees ! Estimated noise=0.271454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155009 Jy ! Component: 100 - total flux cleaned = 0.000185676 Jy ! Component: 150 - total flux cleaned = 0.000204947 Jy ! Component: 200 - total flux cleaned = 0.000214191 Jy ! Total flux subtracted in 200 components = 0.000214191 Jy ! Clean residual min=-0.002153 max=0.003151 Jy/beam ! Clean residual mean=0.000081 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0383245 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0383245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062340Jy sigma=0.475641 ! Fit after self-cal, rms=0.062863Jy sigma=0.473377 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062863Jy sigma=0.473377 ! Fit after self-cal, rms=0.074465Jy sigma=0.468849 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=1.333 mas, bpa=-24.1 degrees ! Estimated noise=0.278513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570784 Jy ! Component: 100 - total flux cleaned = 0.000571836 Jy ! Component: 150 - total flux cleaned = 0.000572497 Jy ! Component: 200 - total flux cleaned = 0.000571967 Jy ! Total flux subtracted in 200 components = 0.000571967 Jy ! Clean residual min=-0.001769 max=0.002845 Jy/beam ! Clean residual mean=0.000020 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0388964 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.0388965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074436Jy sigma=0.468801 ! Fit after self-cal, rms=0.075123Jy sigma=0.467226 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241674 Jy ! Component: 100 - total flux cleaned = 0.00341368 Jy ! Component: 150 - total flux cleaned = 0.00341331 Jy ! Component: 200 - total flux cleaned = 0.00338234 Jy ! Total flux subtracted in 200 components = 0.00338234 Jy ! Clean residual min=-0.001547 max=0.002169 Jy/beam ! Clean residual mean=0.000017 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0422788 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0422788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075038Jy sigma=0.466139 ! Fit after self-cal, rms=0.074891Jy sigma=0.465698 ! Inverting map ! Added new window around map position (-11.2, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220479 Jy ! Component: 100 - total flux cleaned = 0.00366391 Jy ! Component: 150 - total flux cleaned = 0.00473885 Jy ! Component: 200 - total flux cleaned = 0.00515726 Jy ! Total flux subtracted in 200 components = 0.00515726 Jy ! Clean residual min=-0.001560 max=0.002098 Jy/beam ! Clean residual mean=0.000008 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0474361 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.0474361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074800Jy sigma=0.464718 ! Fit after self-cal, rms=0.074714Jy sigma=0.464367 ! Inverting map ! Added new window around map position (-3.4, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195794 Jy ! Component: 100 - total flux cleaned = 0.00326964 Jy ! Component: 150 - total flux cleaned = 0.00423639 Jy ! Component: 200 - total flux cleaned = 0.00476912 Jy ! Total flux subtracted in 200 components = 0.00476912 Jy ! Clean residual min=-0.001498 max=0.001888 Jy/beam ! Clean residual mean=-0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0522052 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 75 components and 0.0522052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074628Jy sigma=0.463684 ! Fit after self-cal, rms=0.074534Jy sigma=0.463446 ! Inverting map ! Added new window around map position (17.6, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197027 Jy ! Component: 100 - total flux cleaned = 0.00333566 Jy ! Component: 150 - total flux cleaned = 0.00444474 Jy ! Component: 200 - total flux cleaned = 0.00524909 Jy ! Total flux subtracted in 200 components = 0.00524909 Jy ! Clean residual min=-0.001473 max=0.001751 Jy/beam ! Clean residual mean=0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0574543 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 95 components and 0.0574543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074446Jy sigma=0.462658 ! Fit after self-cal, rms=0.074380Jy sigma=0.462432 ! Inverting map ! Added new window around map position (-0.6, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167794 Jy ! Component: 100 - total flux cleaned = 0.0028816 Jy ! Component: 150 - total flux cleaned = 0.00389915 Jy ! Component: 200 - total flux cleaned = 0.00433099 Jy ! Total flux subtracted in 200 components = 0.00433099 Jy ! Clean residual min=-0.001389 max=0.001554 Jy/beam ! Clean residual mean=0.000000 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.0617853 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 109 components and 0.0617853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074315Jy sigma=0.461814 ! Fit after self-cal, rms=0.074217Jy sigma=0.461652 ! Inverting map ! Added new window around map position (10.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159825 Jy ! Component: 100 - total flux cleaned = 0.0026581 Jy ! Component: 150 - total flux cleaned = 0.00330182 Jy ! Component: 200 - total flux cleaned = 0.00371176 Jy ! Total flux subtracted in 200 components = 0.00371176 Jy ! Clean residual min=-0.001407 max=0.001524 Jy/beam ! Clean residual mean=-0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.065497 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 120 components and 0.065497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074153Jy sigma=0.461122 ! Fit after self-cal, rms=0.074039Jy sigma=0.460959 ! Inverting map ! Added new window around map position (-30.6, -44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159477 Jy ! Component: 100 - total flux cleaned = 0.00254862 Jy ! Component: 150 - total flux cleaned = 0.0032304 Jy ! Component: 200 - total flux cleaned = 0.00371027 Jy ! Total flux subtracted in 200 components = 0.00371027 Jy ! Clean residual min=-0.001392 max=0.001435 Jy/beam ! Clean residual mean=-0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0692073 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 132 components and 0.0692073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073976Jy sigma=0.460415 ! Fit after self-cal, rms=0.073902Jy sigma=0.460235 ! Inverting map ! Added new window around map position (-30.8, -22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150274 Jy ! Component: 100 - total flux cleaned = 0.0024623 Jy ! Component: 150 - total flux cleaned = 0.00307694 Jy ! Component: 200 - total flux cleaned = 0.00343928 Jy ! Total flux subtracted in 200 components = 0.00343928 Jy ! Clean residual min=-0.001275 max=0.001361 Jy/beam ! Clean residual mean=0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0726466 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 147 components and 0.0726466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073837Jy sigma=0.459832 ! Fit after self-cal, rms=0.073761Jy sigma=0.459659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073761Jy sigma=0.459659 ! Fit after self-cal, rms=0.067285Jy sigma=0.458699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.31 mas, bpa=-24.73 degrees ! Estimated noise=0.271616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118325 Jy ! Component: 100 - total flux cleaned = 0.00199057 Jy ! Component: 150 - total flux cleaned = 0.00268861 Jy ! Component: 200 - total flux cleaned = 0.00319837 Jy ! Total flux subtracted in 200 components = 0.00319837 Jy ! Clean residual min=-0.001045 max=0.001241 Jy/beam ! Clean residual mean=0.000001 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0758449 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 170 components and 0.0758449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067248Jy sigma=0.458287 ! Fit after self-cal, rms=0.067076Jy sigma=0.457962 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129447 Jy ! Component: 100 - total flux cleaned = 0.00217739 Jy ! Component: 150 - total flux cleaned = 0.00263816 Jy ! Component: 200 - total flux cleaned = 0.00297579 Jy ! Total flux subtracted in 200 components = 0.00297579 Jy ! Clean residual min=-0.001111 max=0.001125 Jy/beam ! Clean residual mean=-0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.0788207 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 186 components and 0.0788207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067034Jy sigma=0.457564 ! Fit after self-cal, rms=0.066955Jy sigma=0.457444 ! Inverting map ! Added new window around map position (36.6, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115238 Jy ! Component: 100 - total flux cleaned = 0.00184328 Jy ! Component: 150 - total flux cleaned = 0.00227993 Jy ! Component: 200 - total flux cleaned = 0.00265505 Jy ! Total flux subtracted in 200 components = 0.00265505 Jy ! Clean residual min=-0.001088 max=0.001035 Jy/beam ! Clean residual mean=-0.000004 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.0814758 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 197 components and 0.0814758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066918Jy sigma=0.457139 ! Fit after self-cal, rms=0.066843Jy sigma=0.457038 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066843Jy sigma=0.457038 ! Fit after self-cal, rms=0.064378Jy sigma=0.456782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=2.513 mas, bpa=-65.24 degrees ! Estimated noise=0.319264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001346 Jy ! Component: 100 - total flux cleaned = 0.00221934 Jy ! Component: 150 - total flux cleaned = 0.00273299 Jy ! Component: 200 - total flux cleaned = 0.00314094 Jy ! Total flux subtracted in 200 components = 0.00314094 Jy ! Clean residual min=-0.001310 max=0.001241 Jy/beam ! Clean residual mean=-0.000006 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0846168 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 221 components and 0.0846167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064354Jy sigma=0.456525 ! Fit after self-cal, rms=0.064240Jy sigma=0.456342 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088977 Jy ! Component: 100 - total flux cleaned = 0.001358 Jy ! Component: 150 - total flux cleaned = 0.00177729 Jy ! Component: 200 - total flux cleaned = 0.00208278 Jy ! Total flux subtracted in 200 components = 0.00208278 Jy ! Clean residual min=-0.001355 max=0.001214 Jy/beam ! Clean residual mean=-0.000008 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0866995 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 232 components and 0.0866995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064221Jy sigma=0.456192 ! Fit after self-cal, rms=0.064181Jy sigma=0.456113 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.309 mas, bpa=-24.87 degrees ! Estimated noise=0.268344 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 1.309 at -24.87 degrees (North through East) ! Clean map min=-0.0016836 max=0.02909 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7265 mas, bmaj=0.9663 mas, bpa=-26.97 degrees ! Estimated noise=0.768954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220039 Jy ! Component: 100 - total flux cleaned = 0.0288294 Jy ! Component: 150 - total flux cleaned = 0.0340233 Jy ! Component: 200 - total flux cleaned = 0.0384715 Jy ! Total flux subtracted in 200 components = 0.0384715 Jy ! Clean residual min=-0.002252 max=0.003651 Jy/beam ! Clean residual mean=0.000019 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0384715 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0384715 Jy ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.309 mas, bpa=-24.87 degrees ! Estimated noise=0.268344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527377 Jy ! Component: 100 - total flux cleaned = 0.00936643 Jy ! Component: 150 - total flux cleaned = 0.0128989 Jy ! Component: 200 - total flux cleaned = 0.0160361 Jy ! Total flux subtracted in 200 components = 0.0160361 Jy ! Clean residual min=-0.001794 max=0.002427 Jy/beam ! Clean residual mean=0.000014 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0545075 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 55 components and 0.0545075 Jy ! Inverting map ! Added new window around map position (4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029074 Jy ! Component: 100 - total flux cleaned = 0.00549542 Jy ! Component: 150 - total flux cleaned = 0.00785263 Jy ! Component: 200 - total flux cleaned = 0.0100094 Jy ! Total flux subtracted in 200 components = 0.0100094 Jy ! Clean residual min=-0.001499 max=0.001584 Jy/beam ! Clean residual mean=0.000005 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.064517 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 79 components and 0.064517 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=2.513 mas, bpa=-65.24 degrees ! Estimated noise=0.319264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030733 Jy ! Component: 100 - total flux cleaned = 0.00558577 Jy ! Component: 150 - total flux cleaned = 0.00778311 Jy ! Component: 200 - total flux cleaned = 0.00966263 Jy ! Total flux subtracted in 200 components = 0.00966263 Jy ! Clean residual min=-0.001784 max=0.001743 Jy/beam ! Clean residual mean=-0.000003 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0741796 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134428 Jy ! Component: 100 - total flux cleaned = 0.0026387 Jy ! Component: 150 - total flux cleaned = 0.00382516 Jy ! Component: 200 - total flux cleaned = 0.00491488 Jy ! Total flux subtracted in 200 components = 0.00491488 Jy ! Clean residual min=-0.001545 max=0.001463 Jy/beam ! Clean residual mean=-0.000008 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0790945 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 140 components and 0.0790944 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.04 mas, bmaj=1.309 mas, bpa=-24.87 degrees ! Estimated noise=0.268344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129525 Jy ! Component: 100 - total flux cleaned = 0.00229373 Jy ! Component: 150 - total flux cleaned = 0.00319767 Jy ! Component: 200 - total flux cleaned = 0.00390975 Jy ! Total flux subtracted in 200 components = 0.00390975 Jy ! Clean residual min=-0.001177 max=0.001063 Jy/beam ! Clean residual mean=-0.000006 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.0830042 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 164 components and 0.0830042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064267Jy sigma=0.456880 ! Fit after self-cal, rms=0.064253Jy sigma=0.456479 wmodel J1507+5857_X_b_map.mod ! Writing 164 model components to file: J1507+5857_X_b_map.mod wobs J1507+5857_X_b_uvs.fits ! Writing UV FITS file: J1507+5857_X_b_uvs.fits wwins J1507+5857_X_b_map.win ! wwins: Wrote 13 windows to J1507+5857_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135078 Jy ! Component: 100 - total flux cleaned = -0.000206052 Jy ! Component: 150 - total flux cleaned = -0.000223258 Jy ! Component: 200 - total flux cleaned = -0.000256399 Jy ! Component: 250 - total flux cleaned = -0.000255894 Jy ! Component: 300 - total flux cleaned = -0.000223755 Jy ! Component: 350 - total flux cleaned = -0.000208256 Jy ! Component: 400 - total flux cleaned = -0.000193097 Jy ! Component: 450 - total flux cleaned = -0.000193212 Jy ! Component: 500 - total flux cleaned = -0.000163694 Jy ! Component: 550 - total flux cleaned = -0.00017811 Jy ! Component: 600 - total flux cleaned = -0.000149748 Jy ! Component: 650 - total flux cleaned = -0.000121789 Jy ! Component: 700 - total flux cleaned = -0.000149427 Jy ! Component: 750 - total flux cleaned = -0.000135786 Jy ! Component: 800 - total flux cleaned = -0.000135805 Jy ! Component: 850 - total flux cleaned = -0.000135795 Jy ! Component: 900 - total flux cleaned = -0.000135858 Jy ! Component: 950 - total flux cleaned = -0.000148699 Jy ! Component: 1000 - total flux cleaned = -0.000161287 Jy ! Component: 1050 - total flux cleaned = -0.000148691 Jy ! Component: 1100 - total flux cleaned = -0.000148494 Jy ! Component: 1150 - total flux cleaned = -0.000123876 Jy ! Component: 1200 - total flux cleaned = -8.7658e-05 Jy ! Component: 1250 - total flux cleaned = -0.000111407 Jy ! Component: 1300 - total flux cleaned = -6.39676e-05 Jy ! Component: 1350 - total flux cleaned = -5.24724e-05 Jy ! Component: 1400 - total flux cleaned = -2.95582e-05 Jy ! Component: 1450 - total flux cleaned = -8.67328e-05 Jy ! Component: 1500 - total flux cleaned = -4.13353e-05 Jy ! Component: 1550 - total flux cleaned = -4.13576e-05 Jy ! Component: 1600 - total flux cleaned = -5.22952e-05 Jy ! Component: 1650 - total flux cleaned = -3.03977e-05 Jy ! Component: 1700 - total flux cleaned = -9.56114e-05 Jy ! Component: 1750 - total flux cleaned = -5.25675e-05 Jy ! Component: 1800 - total flux cleaned = -0.000105626 Jy ! Component: 1850 - total flux cleaned = -8.43717e-05 Jy ! Component: 1900 - total flux cleaned = -7.38177e-05 Jy ! Component: 1950 - total flux cleaned = -5.30838e-05 Jy ! Component: 2000 - total flux cleaned = -6.32544e-05 Jy ! Component: 2050 - total flux cleaned = -3.27711e-05 Jy ! Component: 2100 - total flux cleaned = 7.50781e-06 Jy ! Component: 2150 - total flux cleaned = -2.34331e-06 Jy ! Component: 2200 - total flux cleaned = 7.75013e-06 Jy ! Component: 2250 - total flux cleaned = 7.73647e-06 Jy ! Component: 2300 - total flux cleaned = 5.64891e-05 Jy ! Component: 2350 - total flux cleaned = 7.56525e-05 Jy ! Component: 2400 - total flux cleaned = 8.52897e-05 Jy ! Component: 2450 - total flux cleaned = 8.5281e-05 Jy ! Component: 2500 - total flux cleaned = 0.000123064 Jy ! Component: 2550 - total flux cleaned = 0.000169701 Jy ! Component: 2600 - total flux cleaned = 0.000169844 Jy ! Component: 2650 - total flux cleaned = 0.00022512 Jy ! Component: 2700 - total flux cleaned = 0.000225203 Jy ! Component: 2750 - total flux cleaned = 0.000252373 Jy ! Component: 2800 - total flux cleaned = 0.000279444 Jy ! Component: 2850 - total flux cleaned = 0.00030627 Jy ! Component: 2900 - total flux cleaned = 0.000324021 Jy ! Component: 2950 - total flux cleaned = 0.000376751 Jy ! Component: 3000 - total flux cleaned = 0.000359287 Jy ! Component: 3050 - total flux cleaned = 0.000393958 Jy ! Component: 3100 - total flux cleaned = 0.000393834 Jy ! Component: 3150 - total flux cleaned = 0.000428064 Jy ! Component: 3200 - total flux cleaned = 0.000462063 Jy ! Component: 3250 - total flux cleaned = 0.000470491 Jy ! Component: 3300 - total flux cleaned = 0.000487178 Jy ! Component: 3350 - total flux cleaned = 0.000478916 Jy ! Component: 3400 - total flux cleaned = 0.000503706 Jy ! Component: 3450 - total flux cleaned = 0.000520082 Jy ! Component: 3500 - total flux cleaned = 0.000560826 Jy ! Component: 3550 - total flux cleaned = 0.000560849 Jy ! Component: 3600 - total flux cleaned = 0.000584997 Jy ! Component: 3650 - total flux cleaned = 0.000584933 Jy ! Component: 3700 - total flux cleaned = 0.000592792 Jy ! Component: 3750 - total flux cleaned = 0.000600816 Jy ! Component: 3800 - total flux cleaned = 0.000585146 Jy ! Component: 3850 - total flux cleaned = 0.000608527 Jy ! Component: 3900 - total flux cleaned = 0.000616263 Jy ! Component: 3950 - total flux cleaned = 0.000623965 Jy ! Component: 4000 - total flux cleaned = 0.000631509 Jy ! Component: 4050 - total flux cleaned = 0.000631507 Jy ! Total flux subtracted in 4096 components = 0.000669278 Jy ! Clean residual min=-0.000420 max=0.000383 Jy/beam ! Clean residual mean=-0.000000 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0836735 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 506 components and 0.0836735 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1507+5857_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.04 x 1.309 at -24.87 degrees (North through East) ! Clean map min=-0.00087209 max=0.029149 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1507+5857_X_b_map.fits wmodel /image_prod/ug002_uva//J1507+5857_X_b_map.mod ! Writing 506 model components to file: /image_prod/ug002_uva//J1507+5857_X_b_map.mod wobs /image_prod/ug002_uva//J1507+5857_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1507+5857_X_b_uvs.fits wwins /image_prod/ug002_uva//J1507+5857_X_b_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J1507+5857_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0291494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000133536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.37433 1.37433 2.74866 5.49731 10.9946 21.9892 43.9785 87.957 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.029 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 218.288 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1507+5857_X_b_dfm.log closed on Thu Mar 5 02:05:56 2020