! Started logfile: /image_prod/ug002_uva//J1506-0919_X_dfm.log on Thu Mar 5 02:04:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1506-0919_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1506-0919_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.847531 visibilities/baseline/integration-bin. ! Found source: J1506-0919 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 32952 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1506-0919_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005225Jy sigma=8.946021 ! Fit after self-cal, rms=0.955142Jy sigma=8.480112 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.727 mas, bmaj=1.652 mas, bpa=3.739 degrees ! Estimated noise=0.949841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337165 Jy ! Component: 100 - total flux cleaned = 0.0429919 Jy ! Total flux subtracted in 100 components = 0.0429919 Jy ! Clean residual min=-0.005343 max=0.008583 Jy/beam ! Clean residual mean=0.000002 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.0429919 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0429919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075327Jy sigma=0.646121 ! Fit after self-cal, rms=0.073997Jy sigma=0.632742 ! Inverting map ! Added new window around map position (-29.2, -16.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00957085 Jy ! Component: 100 - total flux cleaned = 0.0158258 Jy ! Total flux subtracted in 100 components = 0.0158258 Jy ! Clean residual min=-0.005440 max=0.006736 Jy/beam ! Clean residual mean=0.000001 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 0.0588177 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0588177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072318Jy sigma=0.614593 ! Fit after self-cal, rms=0.072109Jy sigma=0.610685 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00812219 Jy ! Component: 100 - total flux cleaned = 0.0132356 Jy ! Total flux subtracted in 100 components = 0.0132356 Jy ! Clean residual min=-0.005545 max=0.007251 Jy/beam ! Clean residual mean=0.000002 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.0720532 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.0720533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070856Jy sigma=0.596897 ! Fit after self-cal, rms=0.070635Jy sigma=0.592958 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745604 Jy ! Component: 100 - total flux cleaned = 0.0112287 Jy ! Total flux subtracted in 100 components = 0.0112287 Jy ! Clean residual min=-0.005371 max=0.007564 Jy/beam ! Clean residual mean=0.000002 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.083282 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.083282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069663Jy sigma=0.582208 ! Fit after self-cal, rms=0.069425Jy sigma=0.578337 ! Inverting map ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00965731 Jy ! Component: 100 - total flux cleaned = 0.0137897 Jy ! Total flux subtracted in 100 components = 0.0137897 Jy ! Clean residual min=-0.005441 max=0.006659 Jy/beam ! Clean residual mean=0.000002 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.0970717 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.0970717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067796Jy sigma=0.560799 ! Fit after self-cal, rms=0.067455Jy sigma=0.556400 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00497156 Jy ! Component: 100 - total flux cleaned = 0.00875099 Jy ! Total flux subtracted in 100 components = 0.00875099 Jy ! Clean residual min=-0.005173 max=0.005882 Jy/beam ! Clean residual mean=0.000002 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.105823 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.105823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066189Jy sigma=0.543445 ! Fit after self-cal, rms=0.065973Jy sigma=0.540755 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315904 Jy ! Component: 100 - total flux cleaned = 0.00663617 Jy ! Total flux subtracted in 100 components = 0.00663617 Jy ! Clean residual min=-0.004712 max=0.005992 Jy/beam ! Clean residual mean=0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.112459 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.112459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064946Jy sigma=0.530728 ! Fit after self-cal, rms=0.064770Jy sigma=0.528951 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9269 mas, bmaj=2.005 mas, bpa=5.145 degrees ! Estimated noise=0.446845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950091 Jy ! Component: 100 - total flux cleaned = 0.0159079 Jy ! Component: 150 - total flux cleaned = 0.0188542 Jy ! Component: 200 - total flux cleaned = 0.0214163 Jy ! Total flux subtracted in 200 components = 0.0214163 Jy ! Clean residual min=-0.003807 max=0.007163 Jy/beam ! Clean residual mean=0.000001 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.133875 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 75 components and 0.133875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062800Jy sigma=0.509002 ! Fit after self-cal, rms=0.062560Jy sigma=0.506641 ! Inverting map ! Added new window around map position (-1, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571475 Jy ! Component: 100 - total flux cleaned = 0.00917364 Jy ! Component: 150 - total flux cleaned = 0.0120003 Jy ! Component: 200 - total flux cleaned = 0.0143534 Jy ! Total flux subtracted in 200 components = 0.0143534 Jy ! Clean residual min=-0.003161 max=0.004847 Jy/beam ! Clean residual mean=-0.000000 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.148229 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.148228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061214Jy sigma=0.493417 ! Fit after self-cal, rms=0.061080Jy sigma=0.492063 ! Inverting map ! Added new window around map position (-2.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387759 Jy ! Component: 100 - total flux cleaned = 0.00671492 Jy ! Component: 150 - total flux cleaned = 0.00886399 Jy ! Component: 200 - total flux cleaned = 0.0106358 Jy ! Total flux subtracted in 200 components = 0.0106358 Jy ! Clean residual min=-0.002526 max=0.003394 Jy/beam ! Clean residual mean=-0.000000 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.158864 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.158864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060304Jy sigma=0.484579 ! Fit after self-cal, rms=0.060229Jy sigma=0.483786 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9269 x 2.005 at 5.145 degrees (North through East) ! Clean map min=-0.0036411 max=0.043586 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.92 HN 0.93 KP 0.98 ! LA 0.90 MK 1.03 NL 1.13 OV 0.97 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.89 HN 0.89 KP 0.97 ! LA 0.92 MK 1.09 NL 1.16 OV 1.00 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.91 HN 0.89 KP 0.97 ! LA 0.94 MK 1.07 NL 1.10 OV 0.98 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.95 HN 0.88 KP 0.94 ! LA 0.93 MK 1.16 NL 1.12 OV 0.99 ! SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 0.95 KP 0.95 ! LA 0.93 MK 1.21 NL 1.12 OV 0.98 ! SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.92 HN 0.90 KP 1.00 ! LA 0.90 MK 1.20 NL 1.17 OV 1.00 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.91 KP 0.95 ! LA 0.94 MK 1.12 NL 1.14 OV 0.97 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 0.93 KP 0.97 ! LA 0.92 MK 1.03 NL 1.11 OV 0.99 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.87 KP 1.00 ! LA 0.95 MK 0.92 NL 1.17 OV 0.96 ! SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.83 KP 1.01 ! LA 0.95 MK 0.88 NL 1.15 OV 0.97 ! SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.92 KP 1.02 ! LA 0.92 MK 0.93 NL 1.14 OV 0.95 ! SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.90 HN 0.82 KP 1.00 ! LA 0.93 MK 0.94 NL 1.18 OV 1.00 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.060229Jy sigma=0.483786 ! Fit after self-cal, rms=0.056435Jy sigma=0.479270 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9322 mas, bmaj=2.026 mas, bpa=5.773 degrees ! Estimated noise=0.425739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148709 Jy ! Component: 100 - total flux cleaned = -0.00074506 Jy ! Component: 150 - total flux cleaned = -0.000107441 Jy ! Component: 200 - total flux cleaned = 0.000438338 Jy ! Total flux subtracted in 200 components = 0.000438338 Jy ! Clean residual min=-0.001815 max=0.001961 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.159303 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.159303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056093Jy sigma=0.475824 ! Fit after self-cal, rms=0.056083Jy sigma=0.475196 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056083Jy sigma=0.475196 ! Fit after self-cal, rms=0.054811Jy sigma=0.472986 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9299 mas, bmaj=2.027 mas, bpa=6.488 degrees ! Estimated noise=0.413824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000812941 Jy ! Component: 100 - total flux cleaned = -0.000372796 Jy ! Component: 150 - total flux cleaned = -7.7712e-06 Jy ! Component: 200 - total flux cleaned = 0.000302673 Jy ! Total flux subtracted in 200 components = 0.000302673 Jy ! Clean residual min=-0.001341 max=0.001382 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.159605 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 0.159605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054679Jy sigma=0.471635 ! Fit after self-cal, rms=0.054694Jy sigma=0.471396 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520169 Jy ! Component: 100 - total flux cleaned = 0.000875448 Jy ! Component: 150 - total flux cleaned = 0.00119213 Jy ! Component: 200 - total flux cleaned = 0.00144731 Jy ! Total flux subtracted in 200 components = 0.00144731 Jy ! Clean residual min=-0.001243 max=0.001325 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.161053 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 139 components and 0.161053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054625Jy sigma=0.470735 ! Fit after self-cal, rms=0.054626Jy sigma=0.470683 ! Inverting map ! Added new window around map position (-30.2, -29.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862829 Jy ! Component: 100 - total flux cleaned = 0.0012759 Jy ! Component: 150 - total flux cleaned = 0.00165331 Jy ! Component: 200 - total flux cleaned = 0.0019427 Jy ! Total flux subtracted in 200 components = 0.0019427 Jy ! Clean residual min=-0.001147 max=0.001143 Jy/beam ! Clean residual mean=-0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.162995 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 151 components and 0.162995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054576Jy sigma=0.470197 ! Fit after self-cal, rms=0.054575Jy sigma=0.470163 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054575Jy sigma=0.470163 ! Fit after self-cal, rms=0.053471Jy sigma=0.469912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9263 mas, bmaj=2.021 mas, bpa=6.945 degrees ! Estimated noise=0.406363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197955 Jy ! Component: 100 - total flux cleaned = 6.19748e-05 Jy ! Component: 150 - total flux cleaned = 0.000388375 Jy ! Component: 200 - total flux cleaned = 0.00063725 Jy ! Total flux subtracted in 200 components = 0.00063725 Jy ! Clean residual min=-0.001092 max=0.001096 Jy/beam ! Clean residual mean=-0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.163632 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 163 components and 0.163632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053433Jy sigma=0.469544 ! Fit after self-cal, rms=0.053437Jy sigma=0.469483 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110988 Jy ! Component: 100 - total flux cleaned = 0.000322945 Jy ! Component: 150 - total flux cleaned = 0.000569231 Jy ! Component: 200 - total flux cleaned = 0.000753774 Jy ! Total flux subtracted in 200 components = 0.000753774 Jy ! Clean residual min=-0.001029 max=0.001037 Jy/beam ! Clean residual mean=-0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.164386 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 172 components and 0.164386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053414Jy sigma=0.469264 ! Fit after self-cal, rms=0.053411Jy sigma=0.469212 ! Inverting map ! Added new window around map position (27, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800535 Jy ! Component: 100 - total flux cleaned = 0.00103977 Jy ! Component: 150 - total flux cleaned = 0.00117251 Jy ! Component: 200 - total flux cleaned = 0.00129626 Jy ! Total flux subtracted in 200 components = 0.00129626 Jy ! Clean residual min=-0.001000 max=0.000987 Jy/beam ! Clean residual mean=-0.000000 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.165683 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 184 components and 0.165683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053386Jy sigma=0.468985 ! Fit after self-cal, rms=0.053385Jy sigma=0.468967 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053385Jy sigma=0.468967 ! Fit after self-cal, rms=0.052791Jy sigma=0.468908 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.04 mas, bmaj=3.533 mas, bpa=9.418 degrees ! Estimated noise=0.492441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510947 Jy ! Component: 100 - total flux cleaned = 0.000773434 Jy ! Component: 150 - total flux cleaned = 0.000957294 Jy ! Component: 200 - total flux cleaned = 0.00107014 Jy ! Total flux subtracted in 200 components = 0.00107014 Jy ! Clean residual min=-0.001023 max=0.000997 Jy/beam ! Clean residual mean=-0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.166753 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 205 components and 0.166753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052786Jy sigma=0.468834 ! Fit after self-cal, rms=0.052783Jy sigma=0.468818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154683 Jy ! Component: 100 - total flux cleaned = 0.000237969 Jy ! Component: 150 - total flux cleaned = 0.000352078 Jy ! Component: 200 - total flux cleaned = 0.000386539 Jy ! Total flux subtracted in 200 components = 0.000386539 Jy ! Clean residual min=-0.000998 max=0.000952 Jy/beam ! Clean residual mean=-0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.167139 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 216 components and 0.167139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052781Jy sigma=0.468791 ! Fit after self-cal, rms=0.052780Jy sigma=0.468788 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9244 mas, bmaj=2.018 mas, bpa=7.159 degrees ! Estimated noise=0.4028 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9244 x 2.018 at 7.159 degrees (North through East) ! Clean map min=-0.0018477 max=0.04168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7254 mas, bmaj=1.659 mas, bpa=5.747 degrees ! Estimated noise=0.858706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032961 Jy ! Component: 100 - total flux cleaned = 0.0511002 Jy ! Component: 150 - total flux cleaned = 0.0650566 Jy ! Component: 200 - total flux cleaned = 0.0763888 Jy ! Total flux subtracted in 200 components = 0.0763888 Jy ! Clean residual min=-0.005662 max=0.006870 Jy/beam ! Clean residual mean=0.000006 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.0763888 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0763888 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9244 mas, bmaj=2.018 mas, bpa=7.159 degrees ! Estimated noise=0.4028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162062 Jy ! Component: 100 - total flux cleaned = 0.0273121 Jy ! Component: 150 - total flux cleaned = 0.0361192 Jy ! Component: 200 - total flux cleaned = 0.0433202 Jy ! Total flux subtracted in 200 components = 0.0433202 Jy ! Clean residual min=-0.003195 max=0.004348 Jy/beam ! Clean residual mean=0.000002 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.119709 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 81 components and 0.119709 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595478 Jy ! Component: 100 - total flux cleaned = 0.0109449 Jy ! Component: 150 - total flux cleaned = 0.0151636 Jy ! Component: 200 - total flux cleaned = 0.0187637 Jy ! Total flux subtracted in 200 components = 0.0187637 Jy ! Clean residual min=-0.002170 max=0.002358 Jy/beam ! Clean residual mean=0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.138473 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 114 components and 0.138473 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.04 mas, bmaj=3.533 mas, bpa=9.418 degrees ! Estimated noise=0.492441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00535141 Jy ! Component: 100 - total flux cleaned = 0.00916101 Jy ! Component: 150 - total flux cleaned = 0.0121011 Jy ! Component: 200 - total flux cleaned = 0.01412 Jy ! Total flux subtracted in 200 components = 0.01412 Jy ! Clean residual min=-0.001760 max=0.001870 Jy/beam ! Clean residual mean=-0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.152593 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168534 Jy ! Component: 100 - total flux cleaned = 0.00313045 Jy ! Component: 150 - total flux cleaned = 0.00444077 Jy ! Component: 200 - total flux cleaned = 0.00553434 Jy ! Total flux subtracted in 200 components = 0.00553434 Jy ! Clean residual min=-0.001317 max=0.001377 Jy/beam ! Clean residual mean=-0.000000 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.158127 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 199 components and 0.158127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9244 mas, bmaj=2.018 mas, bpa=7.159 degrees ! Estimated noise=0.4028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148725 Jy ! Component: 100 - total flux cleaned = 0.00223712 Jy ! Component: 150 - total flux cleaned = 0.00295976 Jy ! Component: 200 - total flux cleaned = 0.00349668 Jy ! Total flux subtracted in 200 components = 0.00349668 Jy ! Clean residual min=-0.001262 max=0.001177 Jy/beam ! Clean residual mean=-0.000000 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.161624 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 225 components and 0.161624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052885Jy sigma=0.469684 ! Fit after self-cal, rms=0.052807Jy sigma=0.469140 wmodel J1506-0919_X_map.mod ! Writing 225 model components to file: J1506-0919_X_map.mod wobs J1506-0919_X_uvs.fits ! Writing UV FITS file: J1506-0919_X_uvs.fits wwins J1506-0919_X_map.win ! wwins: Wrote 9 windows to J1506-0919_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.07611e-05 Jy ! Component: 100 - total flux cleaned = 0.000107762 Jy ! Component: 150 - total flux cleaned = 0.000143066 Jy ! Component: 200 - total flux cleaned = 0.000126628 Jy ! Component: 250 - total flux cleaned = 9.4578e-05 Jy ! Component: 300 - total flux cleaned = 9.45601e-05 Jy ! Component: 350 - total flux cleaned = 0.000109701 Jy ! Component: 400 - total flux cleaned = 0.000109593 Jy ! Component: 450 - total flux cleaned = 0.000152958 Jy ! Component: 500 - total flux cleaned = 0.000138856 Jy ! Component: 550 - total flux cleaned = 0.000166439 Jy ! Component: 600 - total flux cleaned = 0.000152766 Jy ! Component: 650 - total flux cleaned = 0.000192679 Jy ! Component: 700 - total flux cleaned = 0.000166475 Jy ! Component: 750 - total flux cleaned = 0.000140985 Jy ! Component: 800 - total flux cleaned = 0.000166439 Jy ! Component: 850 - total flux cleaned = 0.00015401 Jy ! Component: 900 - total flux cleaned = 0.000129588 Jy ! Component: 950 - total flux cleaned = 9.36293e-05 Jy ! Component: 1000 - total flux cleaned = 7.03544e-05 Jy ! Component: 1050 - total flux cleaned = 9.38846e-05 Jy ! Component: 1100 - total flux cleaned = 4.77175e-05 Jy ! Component: 1150 - total flux cleaned = -9.20065e-06 Jy ! Component: 1200 - total flux cleaned = -3.17084e-05 Jy ! Component: 1250 - total flux cleaned = -8.72367e-05 Jy ! Component: 1300 - total flux cleaned = -0.000131126 Jy ! Component: 1350 - total flux cleaned = -0.000206656 Jy ! Component: 1400 - total flux cleaned = -0.00020657 Jy ! Component: 1450 - total flux cleaned = -0.000269868 Jy ! Component: 1500 - total flux cleaned = -0.000300945 Jy ! Component: 1550 - total flux cleaned = -0.000300751 Jy ! Component: 1600 - total flux cleaned = -0.000321149 Jy ! Component: 1650 - total flux cleaned = -0.000341335 Jy ! Component: 1700 - total flux cleaned = -0.000381063 Jy ! Component: 1750 - total flux cleaned = -0.000390805 Jy ! Component: 1800 - total flux cleaned = -0.000400653 Jy ! Component: 1850 - total flux cleaned = -0.000429569 Jy ! Component: 1900 - total flux cleaned = -0.000420136 Jy ! Component: 1950 - total flux cleaned = -0.000448629 Jy ! Component: 2000 - total flux cleaned = -0.000486407 Jy ! Component: 2050 - total flux cleaned = -0.000486607 Jy ! Component: 2100 - total flux cleaned = -0.000514294 Jy ! Component: 2150 - total flux cleaned = -0.000568989 Jy ! Component: 2200 - total flux cleaned = -0.000577981 Jy ! Component: 2250 - total flux cleaned = -0.0005869 Jy ! Component: 2300 - total flux cleaned = -0.000578114 Jy ! Component: 2350 - total flux cleaned = -0.000657151 Jy ! Component: 2400 - total flux cleaned = -0.000622413 Jy ! Component: 2450 - total flux cleaned = -0.000613867 Jy ! Component: 2500 - total flux cleaned = -0.000622464 Jy ! Component: 2550 - total flux cleaned = -0.000613961 Jy ! Component: 2600 - total flux cleaned = -0.000588784 Jy ! Component: 2650 - total flux cleaned = -0.000605427 Jy ! Component: 2700 - total flux cleaned = -0.000638552 Jy ! Component: 2750 - total flux cleaned = -0.000613774 Jy ! Component: 2800 - total flux cleaned = -0.000597415 Jy ! Component: 2850 - total flux cleaned = -0.000581326 Jy ! Component: 2900 - total flux cleaned = -0.000573341 Jy ! Component: 2950 - total flux cleaned = -0.000573291 Jy ! Component: 3000 - total flux cleaned = -0.000557386 Jy ! Component: 3050 - total flux cleaned = -0.000533847 Jy ! Component: 3100 - total flux cleaned = -0.000533838 Jy ! Component: 3150 - total flux cleaned = -0.000541548 Jy ! Component: 3200 - total flux cleaned = -0.000526276 Jy ! Component: 3250 - total flux cleaned = -0.000526227 Jy ! Component: 3300 - total flux cleaned = -0.000518603 Jy ! Component: 3350 - total flux cleaned = -0.000541183 Jy ! Component: 3400 - total flux cleaned = -0.000556089 Jy ! Component: 3450 - total flux cleaned = -0.000556067 Jy ! Component: 3500 - total flux cleaned = -0.000541203 Jy ! Component: 3550 - total flux cleaned = -0.000541267 Jy ! Component: 3600 - total flux cleaned = -0.000548493 Jy ! Component: 3650 - total flux cleaned = -0.000519596 Jy ! Component: 3700 - total flux cleaned = -0.000526714 Jy ! Component: 3750 - total flux cleaned = -0.000505271 Jy ! Component: 3800 - total flux cleaned = -0.000505366 Jy ! Component: 3850 - total flux cleaned = -0.000498264 Jy ! Component: 3900 - total flux cleaned = -0.000512235 Jy ! Component: 3950 - total flux cleaned = -0.000505149 Jy ! Component: 4000 - total flux cleaned = -0.000484381 Jy ! Component: 4050 - total flux cleaned = -0.000505019 Jy ! Total flux subtracted in 4096 components = -0.000504967 Jy ! Clean residual min=-0.000458 max=0.000407 Jy/beam ! Clean residual mean=-0.000000 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.161119 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 492 components and 0.161119 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1506-0919_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9244 x 2.018 at 7.159 degrees (North through East) ! Clean map min=-0.00103 max=0.042052 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1506-0919_X_map.fits wmodel /image_prod/ug002_uva//J1506-0919_X_map.mod ! Writing 492 model components to file: /image_prod/ug002_uva//J1506-0919_X_map.mod wobs /image_prod/ug002_uva//J1506-0919_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1506-0919_X_uvs.fits wwins /image_prod/ug002_uva//J1506-0919_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J1506-0919_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0420516 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116938 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.834249 0.834249 1.6685 3.337 6.674 13.348 26.696 53.392 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.042 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 359.604 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1506-0919_X_dfm.log closed on Thu Mar 5 02:04:53 2020