! Started logfile: /image_prod/ug002_uva//J1504+3249_X_dfm.log on Thu Mar  5 02:03:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1504+3249_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1504+3249_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.984259 visibilities/baseline/integration-bin.
! Found source: J1504+3249
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25512 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1504+3249_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006709Jy  sigma=9.547818
! Fit after  self-cal, rms=0.909214Jy  sigma=8.625788
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7853 mas, bmaj=1.994 mas, bpa=-21 degrees
! Estimated noise=1.00144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630634 Jy
! Component: 100  -  total flux cleaned = 0.0911447 Jy
! Total flux subtracted in 100 components = 0.0911447 Jy
! Clean residual min=-0.005073 max=0.013800 Jy/beam
! Clean residual mean=-0.000003 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.0911447 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0911447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066766Jy  sigma=0.602568
! Fit after  self-cal, rms=0.066268Jy  sigma=0.597787
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016968 Jy
! Component: 100  -  total flux cleaned = 0.0266886 Jy
! Total flux subtracted in 100 components = 0.0266886 Jy
! Clean residual min=-0.003943 max=0.008790 Jy/beam
! Clean residual mean=-0.000001 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.117833 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.117833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059538Jy  sigma=0.531163
! Fit after  self-cal, rms=0.059460Jy  sigma=0.530488
! Inverting map 
! Added new window around map position (1.4, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00820404 Jy
! Component: 100  -  total flux cleaned = 0.0133499 Jy
! Total flux subtracted in 100 components = 0.0133499 Jy
! Clean residual min=-0.004094 max=0.004514 Jy/beam
! Clean residual mean=-0.000001 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.131183 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.131183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057691Jy  sigma=0.512666
! Fit after  self-cal, rms=0.057610Jy  sigma=0.511802
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.217 mas, bpa=-19.88 degrees
! Estimated noise=0.472933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00664655 Jy
! Component: 100  -  total flux cleaned = 0.0105867 Jy
! Component: 150  -  total flux cleaned = 0.0132888 Jy
! Component: 200  -  total flux cleaned = 0.015233 Jy
! Total flux subtracted in 200 components = 0.015233 Jy
! Clean residual min=-0.002826 max=0.003983 Jy/beam
! Clean residual mean=-0.000003 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.146416 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 55 components and 0.146416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056779Jy  sigma=0.503334
! Fit after  self-cal, rms=0.056741Jy  sigma=0.502930
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.023 x 2.217 at -19.88 degrees (North through East)
! Clean map  min=-0.0028794  max=0.083499 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        1.08     
!   LA        0.98     MK        1.05     NL        1.12     OV        0.91     
!   PT        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        1.06     
!   LA        1.01     MK        1.02     NL        1.13     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.99     KP        1.06     
!   LA        0.97     MK        1.08     NL        1.15     OV        0.90     
!   PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.01     KP        1.10     
!   LA        0.99     MK        1.09     NL        1.14     OV        0.92     
!   PT        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.97     KP        1.08     
!   LA        0.99     MK        1.02     NL        1.13     OV        0.91     
!   PT        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.00     KP        1.06     
!   LA        0.97     MK        1.04     NL        1.15     OV        0.91     
!   PT        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.03     KP        1.05     
!   LA        0.99     MK        1.05     NL        1.12     OV        0.93     
!   PT        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.96     KP        1.10     
!   LA        0.98     MK        1.10     NL        1.12     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.92     KP        1.08     
!   LA        1.02     MK        1.12     NL        1.11     OV        0.89     
!   PT        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.98     KP        1.13     
!   LA        0.98     MK        1.04     NL        1.15     OV        0.91     
!   PT        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.99     KP        1.08     
!   LA        1.02     MK        0.97     NL        1.13     OV        0.93     
!   PT        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.91     KP        1.08     
!   LA        0.99     MK        1.05     NL        1.17     OV        0.93     
!   PT        0.89     
! 
! 
! Fit before self-cal, rms=0.056741Jy  sigma=0.502930
! Fit after  self-cal, rms=0.055086Jy  sigma=0.494221
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=2.222 mas, bpa=-19.7 degrees
! Estimated noise=0.475495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000796991 Jy
! Component: 100  -  total flux cleaned = 0.000988977 Jy
! Component: 150  -  total flux cleaned = 0.000935444 Jy
! Component: 200  -  total flux cleaned = 0.000938758 Jy
! Total flux subtracted in 200 components = 0.000938758 Jy
! Clean residual min=-0.001634 max=0.001453 Jy/beam
! Clean residual mean=0.000002 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.147355 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.147355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054946Jy  sigma=0.492938
! Fit after  self-cal, rms=0.054955Jy  sigma=0.492706
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054955Jy  sigma=0.492706
! Fit after  self-cal, rms=0.054790Jy  sigma=0.491392
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=2.218 mas, bpa=-20.05 degrees
! Estimated noise=0.472356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183885 Jy
! Component: 100  -  total flux cleaned = 0.000327416 Jy
! Component: 150  -  total flux cleaned = 0.000358673 Jy
! Component: 200  -  total flux cleaned = 0.000357696 Jy
! Total flux subtracted in 200 components = 0.000357696 Jy
! Clean residual min=-0.001498 max=0.001510 Jy/beam
! Clean residual mean=0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.147713 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.147713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054747Jy  sigma=0.490982
! Fit after  self-cal, rms=0.054757Jy  sigma=0.490927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-30, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137966 Jy
! Component: 100  -  total flux cleaned = 0.00211082 Jy
! Component: 150  -  total flux cleaned = 0.00263633 Jy
! Component: 200  -  total flux cleaned = 0.00292469 Jy
! Total flux subtracted in 200 components = 0.00292469 Jy
! Clean residual min=-0.001392 max=0.001299 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.150637 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 110 components and 0.150637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054710Jy  sigma=0.490499
! Fit after  self-cal, rms=0.054707Jy  sigma=0.490471
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054707Jy  sigma=0.490471
! Fit after  self-cal, rms=0.054710Jy  sigma=0.490432
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=2.217 mas, bpa=-20.11 degrees
! Estimated noise=0.471596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.98074e-05 Jy
! Component: 100  -  total flux cleaned = 0.000175795 Jy
! Component: 150  -  total flux cleaned = 0.000364861 Jy
! Component: 200  -  total flux cleaned = 0.000520077 Jy
! Total flux subtracted in 200 components = 0.000520077 Jy
! Clean residual min=-0.001318 max=0.001312 Jy/beam
! Clean residual mean=0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.151157 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 113 components and 0.151157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054687Jy  sigma=0.490231
! Fit after  self-cal, rms=0.054689Jy  sigma=0.490218
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -21.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000790633 Jy
! Component: 100  -  total flux cleaned = 0.000921955 Jy
! Component: 150  -  total flux cleaned = 0.00102636 Jy
! Component: 200  -  total flux cleaned = 0.00117133 Jy
! Total flux subtracted in 200 components = 0.00117133 Jy
! Clean residual min=-0.001217 max=0.001125 Jy/beam
! Clean residual mean=0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.152329 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 0.152329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054650Jy  sigma=0.489869
! Fit after  self-cal, rms=0.054647Jy  sigma=0.489844
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054647Jy  sigma=0.489844
! Fit after  self-cal, rms=0.054561Jy  sigma=0.489826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.251 mas, bmaj=2.775 mas, bpa=-9.496 degrees
! Estimated noise=0.560418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.58288e-05 Jy
! Component: 100  -  total flux cleaned = 0.000374852 Jy
! Component: 150  -  total flux cleaned = 0.000596726 Jy
! Component: 200  -  total flux cleaned = 0.000759218 Jy
! Total flux subtracted in 200 components = 0.000759218 Jy
! Clean residual min=-0.001146 max=0.001469 Jy/beam
! Clean residual mean=0.000002 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.153088 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 151 components and 0.153088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054552Jy  sigma=0.489759
! Fit after  self-cal, rms=0.054553Jy  sigma=0.489751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140183 Jy
! Component: 100  -  total flux cleaned = 0.00212595 Jy
! Component: 150  -  total flux cleaned = 0.00250008 Jy
! Component: 200  -  total flux cleaned = 0.00284468 Jy
! Total flux subtracted in 200 components = 0.00284468 Jy
! Clean residual min=-0.000945 max=0.000936 Jy/beam
! Clean residual mean=0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.155933 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 183 components and 0.155933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054528Jy  sigma=0.489515
! Fit after  self-cal, rms=0.054525Jy  sigma=0.489491
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=2.218 mas, bpa=-20.12 degrees
! Estimated noise=0.470565 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.029 x 2.218 at -20.12 degrees (North through East)
! Clean map  min=-0.00096977  max=0.083212 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7889 mas, bmaj=2 mas, bpa=-21.29 degrees
! Estimated noise=1.00332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.064241 Jy
! Component: 100  -  total flux cleaned = 0.092348 Jy
! Component: 150  -  total flux cleaned = 0.108197 Jy
! Component: 200  -  total flux cleaned = 0.118416 Jy
! Total flux subtracted in 200 components = 0.118416 Jy
! Clean residual min=-0.003177 max=0.005509 Jy/beam
! Clean residual mean=0.000001 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.118416 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.118416 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=2.218 mas, bpa=-20.12 degrees
! Estimated noise=0.470565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100278 Jy
! Component: 100  -  total flux cleaned = 0.0156217 Jy
! Component: 150  -  total flux cleaned = 0.0192873 Jy
! Component: 200  -  total flux cleaned = 0.0218371 Jy
! Total flux subtracted in 200 components = 0.0218371 Jy
! Clean residual min=-0.001712 max=0.001745 Jy/beam
! Clean residual mean=0.000000 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.140253 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 40 components and 0.140253 Jy
! Inverting map 
! Added new window around map position (-9.2, 24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202507 Jy
! Component: 100  -  total flux cleaned = 0.00370524 Jy
! Component: 150  -  total flux cleaned = 0.00499558 Jy
! Component: 200  -  total flux cleaned = 0.00618593 Jy
! Total flux subtracted in 200 components = 0.00618593 Jy
! Clean residual min=-0.001474 max=0.001276 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.146439 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 66 components and 0.146439 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.251 mas, bmaj=2.775 mas, bpa=-9.496 degrees
! Estimated noise=0.560418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156501 Jy
! Component: 100  -  total flux cleaned = 0.00282011 Jy
! Component: 150  -  total flux cleaned = 0.00390023 Jy
! Component: 200  -  total flux cleaned = 0.00484599 Jy
! Total flux subtracted in 200 components = 0.00484599 Jy
! Clean residual min=-0.001278 max=0.001129 Jy/beam
! Clean residual mean=0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.151285 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000740684 Jy
! Component: 100  -  total flux cleaned = 0.00116643 Jy
! Component: 150  -  total flux cleaned = 0.00150291 Jy
! Component: 200  -  total flux cleaned = 0.0018908 Jy
! Total flux subtracted in 200 components = 0.0018908 Jy
! Clean residual min=-0.001159 max=0.001020 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.153176 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 134 components and 0.153176 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=2.218 mas, bpa=-20.12 degrees
! Estimated noise=0.470565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000297697 Jy
! Component: 100  -  total flux cleaned = 0.000333945 Jy
! Component: 150  -  total flux cleaned = 0.000399812 Jy
! Component: 200  -  total flux cleaned = 0.000522373 Jy
! Total flux subtracted in 200 components = 0.000522373 Jy
! Clean residual min=-0.001138 max=0.001146 Jy/beam
! Clean residual mean=0.000000 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.153698 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 152 components and 0.153698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054526Jy  sigma=0.489511
! Fit after  self-cal, rms=0.054514Jy  sigma=0.489403
wmodel J1504+3249_X_map.mod
! Writing 152 model components to file: J1504+3249_X_map.mod
wobs   J1504+3249_X_uvs.fits
! Writing UV FITS file: J1504+3249_X_uvs.fits
wwins  J1504+3249_X_map.win
! wwins: Wrote 7 windows to J1504+3249_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.79358e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145354 Jy
! Component: 150  -  total flux cleaned = 0.000213382 Jy
! Component: 200  -  total flux cleaned = 0.0002625 Jy
! Component: 250  -  total flux cleaned = 0.000309911 Jy
! Component: 300  -  total flux cleaned = 0.000310333 Jy
! Component: 350  -  total flux cleaned = 0.000339887 Jy
! Component: 400  -  total flux cleaned = 0.000354109 Jy
! Component: 450  -  total flux cleaned = 0.00042527 Jy
! Component: 500  -  total flux cleaned = 0.000481003 Jy
! Component: 550  -  total flux cleaned = 0.000590108 Jy
! Component: 600  -  total flux cleaned = 0.000656877 Jy
! Component: 650  -  total flux cleaned = 0.000683229 Jy
! Component: 700  -  total flux cleaned = 0.000683333 Jy
! Component: 750  -  total flux cleaned = 0.000708957 Jy
! Component: 800  -  total flux cleaned = 0.000671082 Jy
! Component: 850  -  total flux cleaned = 0.00068371 Jy
! Component: 900  -  total flux cleaned = 0.000720569 Jy
! Component: 950  -  total flux cleaned = 0.000683882 Jy
! Component: 1000  -  total flux cleaned = 0.000671793 Jy
! Component: 1050  -  total flux cleaned = 0.000683499 Jy
! Component: 1100  -  total flux cleaned = 0.000695044 Jy
! Component: 1150  -  total flux cleaned = 0.000683419 Jy
! Component: 1200  -  total flux cleaned = 0.000740593 Jy
! Component: 1250  -  total flux cleaned = 0.000751896 Jy
! Component: 1300  -  total flux cleaned = 0.000785434 Jy
! Component: 1350  -  total flux cleaned = 0.000829535 Jy
! Component: 1400  -  total flux cleaned = 0.000884171 Jy
! Component: 1450  -  total flux cleaned = 0.000905658 Jy
! Component: 1500  -  total flux cleaned = 0.000970133 Jy
! Component: 1550  -  total flux cleaned = 0.00100205 Jy
! Component: 1600  -  total flux cleaned = 0.00107555 Jy
! Component: 1650  -  total flux cleaned = 0.00107558 Jy
! Component: 1700  -  total flux cleaned = 0.00111693 Jy
! Component: 1750  -  total flux cleaned = 0.00117825 Jy
! Component: 1800  -  total flux cleaned = 0.00120827 Jy
! Component: 1850  -  total flux cleaned = 0.00124842 Jy
! Component: 1900  -  total flux cleaned = 0.00125827 Jy
! Component: 1950  -  total flux cleaned = 0.00129761 Jy
! Component: 2000  -  total flux cleaned = 0.00132692 Jy
! Component: 2050  -  total flux cleaned = 0.00137522 Jy
! Component: 2100  -  total flux cleaned = 0.00139437 Jy
! Component: 2150  -  total flux cleaned = 0.00140368 Jy
! Component: 2200  -  total flux cleaned = 0.00142251 Jy
! Component: 2250  -  total flux cleaned = 0.00146908 Jy
! Component: 2300  -  total flux cleaned = 0.00149666 Jy
! Component: 2350  -  total flux cleaned = 0.00149663 Jy
! Component: 2400  -  total flux cleaned = 0.00155118 Jy
! Component: 2450  -  total flux cleaned = 0.00156917 Jy
! Component: 2500  -  total flux cleaned = 0.00156915 Jy
! Component: 2550  -  total flux cleaned = 0.001587 Jy
! Component: 2600  -  total flux cleaned = 0.00163988 Jy
! Component: 2650  -  total flux cleaned = 0.00162237 Jy
! Component: 2700  -  total flux cleaned = 0.00167439 Jy
! Component: 2750  -  total flux cleaned = 0.0016485 Jy
! Component: 2800  -  total flux cleaned = 0.00170837 Jy
! Component: 2850  -  total flux cleaned = 0.00169132 Jy
! Component: 2900  -  total flux cleaned = 0.00169134 Jy
! Component: 2950  -  total flux cleaned = 0.00171654 Jy
! Component: 3000  -  total flux cleaned = 0.00174982 Jy
! Component: 3050  -  total flux cleaned = 0.00174975 Jy
! Component: 3100  -  total flux cleaned = 0.00176622 Jy
! Component: 3150  -  total flux cleaned = 0.00175807 Jy
! Component: 3200  -  total flux cleaned = 0.00178236 Jy
! Component: 3250  -  total flux cleaned = 0.00179843 Jy
! Component: 3300  -  total flux cleaned = 0.0018064 Jy
! Component: 3350  -  total flux cleaned = 0.00184595 Jy
! Component: 3400  -  total flux cleaned = 0.00186959 Jy
! Component: 3450  -  total flux cleaned = 0.00190088 Jy
! Component: 3500  -  total flux cleaned = 0.00192423 Jy
! Component: 3550  -  total flux cleaned = 0.00193191 Jy
! Component: 3600  -  total flux cleaned = 0.0019856 Jy
! Component: 3650  -  total flux cleaned = 0.00200081 Jy
! Component: 3700  -  total flux cleaned = 0.00199326 Jy
! Component: 3750  -  total flux cleaned = 0.00202341 Jy
! Component: 3800  -  total flux cleaned = 0.00206841 Jy
! Component: 3850  -  total flux cleaned = 0.00207585 Jy
! Component: 3900  -  total flux cleaned = 0.00210535 Jy
! Component: 3950  -  total flux cleaned = 0.00209798 Jy
! Component: 4000  -  total flux cleaned = 0.00208346 Jy
! Component: 4050  -  total flux cleaned = 0.00210531 Jy
! Total flux subtracted in 4096 components = 0.00211252 Jy
! Clean residual min=-0.000530 max=0.000469 Jy/beam
! Clean residual mean=0.000000 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.155811 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 454 components and 0.155811 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1504+3249_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.029 x 2.218 at -20.12 degrees (North through East)
! Clean map  min=-0.00070575  max=0.082902 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1504+3249_X_map.fits
wmodel /image_prod/ug002_uva//J1504+3249_X_map.mod
! Writing 454 model components to file: /image_prod/ug002_uva//J1504+3249_X_map.mod
wobs   /image_prod/ug002_uva//J1504+3249_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1504+3249_X_uvs.fits
wwins  /image_prod/ug002_uva//J1504+3249_X_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1504+3249_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0829019 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000126646 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.458298 0.458298 0.916596 1.83319 3.66638 7.33277 14.6655 29.3311 58.6621
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.082 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  654.596 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1504+3249_X_dfm.log closed on Thu Mar  5 02:03:51 2020