! Started logfile: /image_prod/ug002_uva//J1504+1029_X_dfm.log on Thu Mar 5 02:03:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1504+1029_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1504+1029_X_uva.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877249 visibilities/baseline/integration-bin. ! Found source: J1504+1029 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 9948 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1504+1029_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.692881Jy sigma=7.792317 ! Fit after self-cal, rms=1.570652Jy sigma=4.464422 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6634 mas, bmaj=1.718 mas, bpa=-3.029 degrees ! Estimated noise=3.15797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.76148 Jy ! Component: 100 - total flux cleaned = 2.14565 Jy ! Total flux subtracted in 100 components = 2.14565 Jy ! Clean residual min=-0.140557 max=0.270298 Jy/beam ! Clean residual mean=-0.000030 rms=0.029206 Jy/beam ! Combined flux in latest and established models = 2.14565 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 2.14565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.688411Jy sigma=3.431346 ! Fit after self-cal, rms=0.688374Jy sigma=3.430880 ! Inverting map ! Added new window around map position (-4.8, 12.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230349 Jy ! Component: 100 - total flux cleaned = 0.339885 Jy ! Total flux subtracted in 100 components = 0.339885 Jy ! Clean residual min=-0.127065 max=0.244759 Jy/beam ! Clean residual mean=-0.000016 rms=0.025697 Jy/beam ! Combined flux in latest and established models = 2.48553 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 2.48553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.616265Jy sigma=3.159613 ! Fit after self-cal, rms=0.602960Jy sigma=3.140073 ! Inverting map ! Added new window around map position (4.8, -12.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173209 Jy ! Component: 100 - total flux cleaned = 0.25593 Jy ! Total flux subtracted in 100 components = 0.25593 Jy ! Clean residual min=-0.125141 max=0.157807 Jy/beam ! Clean residual mean=0.000002 rms=0.022659 Jy/beam ! Combined flux in latest and established models = 2.74146 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 2.74146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.565739Jy sigma=2.930703 ! Fit after self-cal, rms=0.563767Jy sigma=2.927453 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126021 Jy ! Component: 100 - total flux cleaned = 0.165707 Jy ! Total flux subtracted in 100 components = 0.165707 Jy ! Clean residual min=-0.109952 max=0.136685 Jy/beam ! Clean residual mean=0.000010 rms=0.020993 Jy/beam ! Combined flux in latest and established models = 2.90717 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 2.90717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.528026Jy sigma=2.887570 ! Fit after self-cal, rms=0.525539Jy sigma=2.883718 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8158 mas, bmaj=1.957 mas, bpa=-2.505 degrees ! Estimated noise=2.42136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621379 Jy ! Component: 100 - total flux cleaned = 0.0831826 Jy ! Component: 150 - total flux cleaned = 0.0897552 Jy ! Component: 200 - total flux cleaned = 0.095647 Jy ! Total flux subtracted in 200 components = 0.095647 Jy ! Clean residual min=-0.103072 max=0.116319 Jy/beam ! Clean residual mean=-0.000021 rms=0.025127 Jy/beam ! Combined flux in latest and established models = 3.00282 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 3.00282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.519348Jy sigma=2.762753 ! Fit after self-cal, rms=0.518119Jy sigma=2.761120 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8158 x 1.957 at -2.505 degrees (North through East) ! Clean map min=-0.097651 max=2.156 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 0.92 KP 2.07 ! LA 1.00 MK 0.98 NL 1.21 OV 0.94 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.91 KP 1.84 ! LA 1.04 MK 1.00 NL 1.23 OV 0.96 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 0.91 KP 1.95 ! LA 0.96 MK 1.01 NL 1.23 OV 0.95 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.95 KP 1.84 ! LA 1.01 MK 1.00 NL 1.23 OV 0.90 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.92 KP 1.64 ! LA 1.03 MK 0.97 NL 1.21 OV 0.94 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.91 KP 1.77 ! LA 1.02 MK 0.99 NL 1.19 OV 0.93 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.91 KP 1.79 ! LA 1.00 MK 0.97 NL 1.20 OV 0.93 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.92 KP 1.77 ! LA 1.03 MK 0.97 NL 1.22 OV 0.96 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.95 KP 1.69 ! LA 1.01 MK 0.99 NL 1.19 OV 0.92 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.90 KP 1.59 ! LA 0.97 MK 0.97 NL 1.21 OV 0.95 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.93 KP 1.58 ! LA 1.01 MK 1.01 NL 1.21 OV 0.93 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 0.92 KP 1.58 ! LA 0.99 MK 1.00 NL 1.20 OV 0.92 ! PT 0.89 SC 1.01 ! ! ! Fit before self-cal, rms=0.518119Jy sigma=2.761120 ! Fit after self-cal, rms=0.996686Jy sigma=2.173230 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7953 mas, bmaj=1.908 mas, bpa=-2.223 degrees ! Estimated noise=2.66242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132296 Jy ! Component: 100 - total flux cleaned = 0.13675 Jy ! Component: 150 - total flux cleaned = 0.131168 Jy ! Component: 200 - total flux cleaned = 0.131107 Jy ! Total flux subtracted in 200 components = 0.131107 Jy ! Clean residual min=-0.125764 max=0.091401 Jy/beam ! Clean residual mean=-0.000058 rms=0.024316 Jy/beam ! Combined flux in latest and established models = 3.13392 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 3.13392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.912057Jy sigma=2.222083 ! Fit after self-cal, rms=0.911517Jy sigma=2.220414 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.911517Jy sigma=2.220414 ! Fit after self-cal, rms=2.688283Jy sigma=1.691337 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7883 mas, bmaj=1.888 mas, bpa=-1.645 degrees ! Estimated noise=2.84876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0459756 Jy ! Component: 100 - total flux cleaned = 0.0364422 Jy ! Component: 150 - total flux cleaned = 0.0170759 Jy ! Component: 200 - total flux cleaned = 0.010512 Jy ! Total flux subtracted in 200 components = 0.010512 Jy ! Clean residual min=-0.124485 max=0.083497 Jy/beam ! Clean residual mean=-0.000032 rms=0.022648 Jy/beam ! Combined flux in latest and established models = 3.14443 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 3.14444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=2.605897Jy sigma=1.677386 ! Fit after self-cal, rms=2.605936Jy sigma=1.676655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00550009 Jy ! Component: 100 - total flux cleaned = -0.00793009 Jy ! Component: 150 - total flux cleaned = -0.0148603 Jy ! Component: 200 - total flux cleaned = -0.0257048 Jy ! Total flux subtracted in 200 components = -0.0257048 Jy ! Clean residual min=-0.127566 max=0.084103 Jy/beam ! Clean residual mean=-0.000024 rms=0.022421 Jy/beam ! Combined flux in latest and established models = 3.11873 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 3.11873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=2.578664Jy sigma=1.685362 ! Fit after self-cal, rms=2.578632Jy sigma=1.684814 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=2.578632Jy sigma=1.684814 ! Fit after self-cal, rms=3.224401Jy sigma=1.346517 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.788 mas, bmaj=1.898 mas, bpa=-1.612 degrees ! Estimated noise=2.91038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0085031 Jy ! Component: 100 - total flux cleaned = -0.0170072 Jy ! Component: 150 - total flux cleaned = -0.0123014 Jy ! Component: 200 - total flux cleaned = -0.0142878 Jy ! Total flux subtracted in 200 components = -0.0142878 Jy ! Clean residual min=-0.055129 max=0.055112 Jy/beam ! Clean residual mean=0.000004 rms=0.014968 Jy/beam ! Combined flux in latest and established models = 3.10444 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 3.10444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.191923Jy sigma=1.344883 ! Fit after self-cal, rms=3.191895Jy sigma=1.344441 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169566 Jy ! Component: 100 - total flux cleaned = -0.00320466 Jy ! Component: 150 - total flux cleaned = -0.0100238 Jy ! Component: 200 - total flux cleaned = -0.0137948 Jy ! Total flux subtracted in 200 components = -0.0137948 Jy ! Clean residual min=-0.055974 max=0.052755 Jy/beam ! Clean residual mean=0.000006 rms=0.014921 Jy/beam ! Combined flux in latest and established models = 3.09065 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 3.09065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.179141Jy sigma=1.350570 ! Fit after self-cal, rms=3.179116Jy sigma=1.350236 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.179116Jy sigma=1.350236 ! Fit after self-cal, rms=3.519206Jy sigma=1.323277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.926 mas, bmaj=2.927 mas, bpa=-3.794 degrees ! Estimated noise=4.39683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236319 Jy ! Component: 100 - total flux cleaned = 0.00923312 Jy ! Component: 150 - total flux cleaned = -0.00487541 Jy ! Component: 200 - total flux cleaned = -0.0194477 Jy ! Total flux subtracted in 200 components = -0.0194477 Jy ! Clean residual min=-0.099503 max=0.085680 Jy/beam ! Clean residual mean=0.000054 rms=0.029789 Jy/beam ! Combined flux in latest and established models = 3.0712 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 123 components and 3.0712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.477633Jy sigma=1.352890 ! Fit after self-cal, rms=3.477584Jy sigma=1.352292 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00619215 Jy ! Component: 100 - total flux cleaned = -0.0144171 Jy ! Component: 150 - total flux cleaned = -0.0200758 Jy ! Component: 200 - total flux cleaned = -0.027062 Jy ! Total flux subtracted in 200 components = -0.027062 Jy ! Clean residual min=-0.101876 max=0.088222 Jy/beam ! Clean residual mean=0.000063 rms=0.029768 Jy/beam ! Combined flux in latest and established models = 3.04414 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 129 components and 3.04414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.466361Jy sigma=1.367218 ! Fit after self-cal, rms=3.466333Jy sigma=1.366700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7861 mas, bmaj=1.896 mas, bpa=-1.639 degrees ! Estimated noise=2.97535 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7861 x 1.896 at -1.639 degrees (North through East) ! Clean map min=-0.095874 max=2.733 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=3.466333Jy sigma=1.366700 ! Fit after self-cal, rms=6.418765Jy sigma=0.405600 ! Inverting map and beam ! Estimated beam: bmin=0.7864 mas, bmaj=1.896 mas, bpa=-1.604 degrees ! Estimated noise=2.97246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126853 Jy ! Component: 100 - total flux cleaned = 0.0187725 Jy ! Component: 150 - total flux cleaned = 0.0187435 Jy ! Component: 200 - total flux cleaned = 0.0197513 Jy ! Total flux subtracted in 200 components = 0.0197513 Jy ! Clean residual min=-0.023298 max=0.024650 Jy/beam ! Clean residual mean=-0.000009 rms=0.004889 Jy/beam ! Combined flux in latest and established models = 3.06389 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 145 components and 3.06389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.417951Jy sigma=0.345934 ! Fit after self-cal, rms=6.417379Jy sigma=0.343477 ! Inverting map ! Added new window around map position (6.2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013052 Jy ! Component: 100 - total flux cleaned = 0.0190864 Jy ! Component: 150 - total flux cleaned = 0.0229149 Jy ! Component: 200 - total flux cleaned = 0.0263587 Jy ! Total flux subtracted in 200 components = 0.0263587 Jy ! Clean residual min=-0.020843 max=0.023615 Jy/beam ! Clean residual mean=-0.000008 rms=0.004332 Jy/beam ! Combined flux in latest and established models = 3.09025 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 151 components and 3.09025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.416930Jy sigma=0.321540 ! Fit after self-cal, rms=6.416851Jy sigma=0.321003 ! Inverting map ! Added new window around map position (6, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104666 Jy ! Component: 100 - total flux cleaned = 0.0136625 Jy ! Component: 150 - total flux cleaned = 0.0166313 Jy ! Component: 200 - total flux cleaned = 0.0194004 Jy ! Total flux subtracted in 200 components = 0.0194004 Jy ! Clean residual min=-0.019075 max=0.021179 Jy/beam ! Clean residual mean=-0.000006 rms=0.003995 Jy/beam ! Combined flux in latest and established models = 3.10965 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 162 components and 3.10965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.416568Jy sigma=0.306716 ! Fit after self-cal, rms=6.416565Jy sigma=0.306269 ! Inverting map ! Added new window around map position (1.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134793 Jy ! Component: 100 - total flux cleaned = 0.0167475 Jy ! Component: 150 - total flux cleaned = 0.018274 Jy ! Component: 200 - total flux cleaned = 0.0197323 Jy ! Total flux subtracted in 200 components = 0.0197323 Jy ! Clean residual min=-0.017301 max=0.019503 Jy/beam ! Clean residual mean=-0.000003 rms=0.003761 Jy/beam ! Combined flux in latest and established models = 3.12938 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 179 components and 3.12938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.416443Jy sigma=0.294364 ! Fit after self-cal, rms=6.416297Jy sigma=0.294077 ! Inverting map ! Added new window around map position (-2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141573 Jy ! Component: 100 - total flux cleaned = 0.014151 Jy ! Component: 150 - total flux cleaned = 0.0146159 Jy ! Component: 200 - total flux cleaned = 0.0154995 Jy ! Total flux subtracted in 200 components = 0.0154995 Jy ! Clean residual min=-0.016424 max=0.017685 Jy/beam ! Clean residual mean=0.000000 rms=0.003529 Jy/beam ! Combined flux in latest and established models = 3.14488 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 193 components and 3.14488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.415956Jy sigma=0.283263 ! Fit after self-cal, rms=6.416168Jy sigma=0.282552 ! Inverting map ! Added new window around map position (1, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.009449 Jy ! Component: 100 - total flux cleaned = 0.0127238 Jy ! Component: 150 - total flux cleaned = 0.0157298 Jy ! Component: 200 - total flux cleaned = 0.0189833 Jy ! Total flux subtracted in 200 components = 0.0189833 Jy ! Clean residual min=-0.015755 max=0.013866 Jy/beam ! Clean residual mean=0.000001 rms=0.003296 Jy/beam ! Combined flux in latest and established models = 3.16386 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 201 components and 3.16386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.415941Jy sigma=0.273553 ! Fit after self-cal, rms=6.416043Jy sigma=0.273100 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=6.416043Jy sigma=0.273100 ! Fit after self-cal, rms=4.507475Jy sigma=0.253664 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.644 mas, bmaj=1.676 mas, bpa=-2.307 degrees ! Estimated noise=3.72146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07527 Jy ! Component: 100 - total flux cleaned = 2.54429 Jy ! Component: 150 - total flux cleaned = 2.74354 Jy ! Component: 200 - total flux cleaned = 2.85592 Jy ! Total flux subtracted in 200 components = 2.85592 Jy ! Clean residual min=-0.031744 max=0.058701 Jy/beam ! Clean residual mean=-0.000022 rms=0.006339 Jy/beam ! Combined flux in latest and established models = 2.85592 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.85592 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7857 mas, bmaj=1.895 mas, bpa=-1.532 degrees ! Estimated noise=2.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105983 Jy ! Component: 100 - total flux cleaned = 0.170288 Jy ! Component: 150 - total flux cleaned = 0.212577 Jy ! Component: 200 - total flux cleaned = 0.244428 Jy ! Total flux subtracted in 200 components = 0.244428 Jy ! Clean residual min=-0.019341 max=0.024237 Jy/beam ! Clean residual mean=-0.000035 rms=0.004084 Jy/beam ! Combined flux in latest and established models = 3.10035 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 3.10035 Jy ! Inverting map ! Added new window around map position (-6, 9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243592 Jy ! Component: 100 - total flux cleaned = 0.0373048 Jy ! Component: 150 - total flux cleaned = 0.0471889 Jy ! Component: 200 - total flux cleaned = 0.0575938 Jy ! Total flux subtracted in 200 components = 0.0575938 Jy ! Clean residual min=-0.016653 max=0.019090 Jy/beam ! Clean residual mean=-0.000024 rms=0.003323 Jy/beam ! Combined flux in latest and established models = 3.15794 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 65 components and 3.15794 Jy ! Inverting map ! Added new window around map position (7.6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012899 Jy ! Component: 100 - total flux cleaned = 0.020982 Jy ! Component: 150 - total flux cleaned = 0.0288488 Jy ! Component: 200 - total flux cleaned = 0.035028 Jy ! Total flux subtracted in 200 components = 0.035028 Jy ! Clean residual min=-0.014979 max=0.014870 Jy/beam ! Clean residual mean=-0.000018 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 3.19297 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 86 components and 3.19297 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.935 mas, bmaj=2.924 mas, bpa=-3.535 degrees ! Estimated noise=4.38059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781764 Jy ! Component: 100 - total flux cleaned = 0.0110175 Jy ! Component: 150 - total flux cleaned = 0.0149612 Jy ! Component: 200 - total flux cleaned = 0.0170058 Jy ! Total flux subtracted in 200 components = 0.0170058 Jy ! Clean residual min=-0.018511 max=0.016398 Jy/beam ! Clean residual mean=-0.000035 rms=0.004351 Jy/beam ! Combined flux in latest and established models = 3.20998 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322004 Jy ! Component: 100 - total flux cleaned = 0.00489441 Jy ! Component: 150 - total flux cleaned = 0.006054 Jy ! Component: 200 - total flux cleaned = 0.00750018 Jy ! Total flux subtracted in 200 components = 0.00750018 Jy ! Clean residual min=-0.016994 max=0.014783 Jy/beam ! Clean residual mean=-0.000029 rms=0.003948 Jy/beam ! Combined flux in latest and established models = 3.21748 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 144 components and 3.21748 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7857 mas, bmaj=1.895 mas, bpa=-1.532 degrees ! Estimated noise=2.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417165 Jy ! Component: 100 - total flux cleaned = -4.70815e-05 Jy ! Component: 150 - total flux cleaned = 0.000370669 Jy ! Component: 200 - total flux cleaned = 0.000744218 Jy ! Total flux subtracted in 200 components = 0.000744218 Jy ! Clean residual min=-0.012122 max=0.011881 Jy/beam ! Clean residual mean=-0.000011 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 3.21822 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 163 components and 3.21822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=4.506645Jy sigma=0.232905 ! Fit after self-cal, rms=4.505750Jy sigma=0.228652 wmodel J1504+1029_X_map.mod ! Writing 163 model components to file: J1504+1029_X_map.mod wobs J1504+1029_X_uvs.fits ! Writing UV FITS file: J1504+1029_X_uvs.fits wwins J1504+1029_X_map.win ! wwins: Wrote 11 windows to J1504+1029_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130846 Jy ! Component: 100 - total flux cleaned = -0.00210107 Jy ! Component: 150 - total flux cleaned = -0.00229154 Jy ! Component: 200 - total flux cleaned = -0.00265 Jy ! Component: 250 - total flux cleaned = -0.00299579 Jy ! Component: 300 - total flux cleaned = -0.00332884 Jy ! Component: 350 - total flux cleaned = -0.0031685 Jy ! Component: 400 - total flux cleaned = -0.00332332 Jy ! Component: 450 - total flux cleaned = -0.00301647 Jy ! Component: 500 - total flux cleaned = -0.00316788 Jy ! Component: 550 - total flux cleaned = -0.00316803 Jy ! Component: 600 - total flux cleaned = -0.00316459 Jy ! Component: 650 - total flux cleaned = -0.00259831 Jy ! Component: 700 - total flux cleaned = -0.00259671 Jy ! Component: 750 - total flux cleaned = -0.00259195 Jy ! Component: 800 - total flux cleaned = -0.00272342 Jy ! Component: 850 - total flux cleaned = -0.00271967 Jy ! Component: 900 - total flux cleaned = -0.00297483 Jy ! Component: 950 - total flux cleaned = -0.00272126 Jy ! Component: 1000 - total flux cleaned = -0.0033453 Jy ! Component: 1050 - total flux cleaned = -0.0029787 Jy ! Component: 1100 - total flux cleaned = -0.00322355 Jy ! Component: 1150 - total flux cleaned = -0.00369992 Jy ! Component: 1200 - total flux cleaned = -0.00346321 Jy ! Component: 1250 - total flux cleaned = -0.00346293 Jy ! Component: 1300 - total flux cleaned = -0.00346316 Jy ! Component: 1350 - total flux cleaned = -0.00346531 Jy ! Component: 1400 - total flux cleaned = -0.00368997 Jy ! Component: 1450 - total flux cleaned = -0.0035797 Jy ! Component: 1500 - total flux cleaned = -0.00358127 Jy ! Component: 1550 - total flux cleaned = -0.00358042 Jy ! Component: 1600 - total flux cleaned = -0.00368753 Jy ! Component: 1650 - total flux cleaned = -0.00368606 Jy ! Component: 1700 - total flux cleaned = -0.00347811 Jy ! Component: 1750 - total flux cleaned = -0.00347576 Jy ! Component: 1800 - total flux cleaned = -0.00347458 Jy ! Component: 1850 - total flux cleaned = -0.00317228 Jy ! Component: 1900 - total flux cleaned = -0.00336828 Jy ! Component: 1950 - total flux cleaned = -0.00326922 Jy ! Component: 2000 - total flux cleaned = -0.00278534 Jy ! Component: 2050 - total flux cleaned = -0.00259403 Jy ! Component: 2100 - total flux cleaned = -0.0027814 Jy ! Component: 2150 - total flux cleaned = -0.00240982 Jy ! Component: 2200 - total flux cleaned = -0.00296518 Jy ! Component: 2250 - total flux cleaned = -0.00278243 Jy ! Component: 2300 - total flux cleaned = -0.00305264 Jy ! Component: 2350 - total flux cleaned = -0.00278446 Jy ! Component: 2400 - total flux cleaned = -0.00278532 Jy ! Component: 2450 - total flux cleaned = -0.00295867 Jy ! Component: 2500 - total flux cleaned = -0.00278528 Jy ! Component: 2550 - total flux cleaned = -0.00330195 Jy ! Component: 2600 - total flux cleaned = -0.00321761 Jy ! Component: 2650 - total flux cleaned = -0.00330101 Jy ! Component: 2700 - total flux cleaned = -0.00355175 Jy ! Component: 2750 - total flux cleaned = -0.00355181 Jy ! Component: 2800 - total flux cleaned = -0.00338866 Jy ! Component: 2850 - total flux cleaned = -0.00355034 Jy ! Component: 2900 - total flux cleaned = -0.00339108 Jy ! Component: 2950 - total flux cleaned = -0.00354877 Jy ! Component: 3000 - total flux cleaned = -0.0034709 Jy ! Component: 3050 - total flux cleaned = -0.0037061 Jy ! Component: 3100 - total flux cleaned = -0.00385937 Jy ! Component: 3150 - total flux cleaned = -0.00378389 Jy ! Component: 3200 - total flux cleaned = -0.00408635 Jy ! Component: 3250 - total flux cleaned = -0.00393738 Jy ! Component: 3300 - total flux cleaned = -0.00430909 Jy ! Component: 3350 - total flux cleaned = -0.00438255 Jy ! Component: 3400 - total flux cleaned = -0.00445561 Jy ! Component: 3450 - total flux cleaned = -0.00488863 Jy ! Component: 3500 - total flux cleaned = -0.00503091 Jy ! Component: 3550 - total flux cleaned = -0.00517237 Jy ! Component: 3600 - total flux cleaned = -0.00538243 Jy ! Component: 3650 - total flux cleaned = -0.00531233 Jy ! Component: 3700 - total flux cleaned = -0.00545058 Jy ! Component: 3750 - total flux cleaned = -0.00538285 Jy ! Component: 3800 - total flux cleaned = -0.00551879 Jy ! Component: 3850 - total flux cleaned = -0.00551859 Jy ! Component: 3900 - total flux cleaned = -0.00571962 Jy ! Component: 3950 - total flux cleaned = -0.00591692 Jy ! Component: 4000 - total flux cleaned = -0.00585092 Jy ! Component: 4050 - total flux cleaned = -0.00598173 Jy ! Total flux subtracted in 4096 components = -0.00617413 Jy ! Clean residual min=-0.004038 max=0.003500 Jy/beam ! Clean residual mean=-0.000006 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 3.21205 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 473 components and 3.21205 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1504+1029_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7857 x 1.895 at -1.532 degrees (North through East) ! Clean map min=-0.018308 max=2.7339 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1504+1029_X_map.fits wmodel /image_prod/ug002_uva//J1504+1029_X_map.mod ! Writing 473 model components to file: /image_prod/ug002_uva//J1504+1029_X_map.mod wobs /image_prod/ug002_uva//J1504+1029_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1504+1029_X_uvs.fits wwins /image_prod/ug002_uva//J1504+1029_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1504+1029_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.73392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.119068 0.119068 0.238135 0.476271 0.952541 1.90508 3.81016 7.62033 15.2407 30.4813 60.9626 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.733 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2519.58 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1504+1029_X_dfm.log closed on Thu Mar 5 02:03:30 2020