! Started logfile: /image_prod/ug002_uva//J1503+4759_S_dfm.log on Thu Mar  5 02:03:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1503+4759_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1503+4759_S_uva.fits
! AN table 1: 160 integrations on 6 of 6 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1503+4759
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1503+4759_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.000477Jy  sigma=10.957294
! Fit after  self-cal, rms=0.966780Jy  sigma=10.582135
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.98 mas, bmaj=29.75 mas, bpa=59.38 degrees
! Estimated noise=3.3476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278004 Jy
! Component: 100  -  total flux cleaned = 0.0326185 Jy
! Total flux subtracted in 100 components = 0.0326185 Jy
! Clean residual min=-0.003550 max=0.003556 Jy/beam
! Clean residual mean=0.000043 rms=0.001686 Jy/beam
! Combined flux in latest and established models = 0.0326185 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0326185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.038240Jy  sigma=0.411198
! Fit after  self-cal, rms=0.037038Jy  sigma=0.398431
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=25.11 mas, bmaj=28.23 mas, bpa=65.52 degrees
! Estimated noise=1.21001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000550134 Jy
! Component: 100  -  total flux cleaned = 0.00115747 Jy
! Component: 150  -  total flux cleaned = 0.00123717 Jy
! Component: 200  -  total flux cleaned = 0.00117425 Jy
! Total flux subtracted in 200 components = 0.00117425 Jy
! Clean residual min=-0.000881 max=0.000886 Jy/beam
! Clean residual mean=0.000033 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.0337927 Jy
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 115 components and 0.0337927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036590Jy  sigma=0.393119
! Fit after  self-cal, rms=0.036526Jy  sigma=0.392253
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 25.11 x 28.23 at 65.52 degrees (North through East)
! Clean map  min=-0.0043488  max=0.035199 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        1.02     LA        0.96     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.03     LA        0.92     PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        0.99     LA        0.91     PT        0.93     
! 
! 
! Fit before self-cal, rms=0.036526Jy  sigma=0.392253
! Fit after  self-cal, rms=0.035697Jy  sigma=0.390857
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=25.45 mas, bmaj=28.44 mas, bpa=69.61 degrees
! Estimated noise=1.17884 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226934 Jy
! Component: 100  -  total flux cleaned = -0.000334268 Jy
! Component: 150  -  total flux cleaned = -0.000247021 Jy
! Component: 200  -  total flux cleaned = -4.75209e-05 Jy
! Total flux subtracted in 200 components = -4.75209e-05 Jy
! Clean residual min=-0.000382 max=0.000384 Jy/beam
! Clean residual mean=0.000017 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0337452 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 212 components and 0.0337452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.035633Jy  sigma=0.390124
! Fit after  self-cal, rms=0.035664Jy  sigma=0.389579
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.035664Jy  sigma=0.389579
! Fit after  self-cal, rms=0.036141Jy  sigma=0.388213
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=25.49 mas, bmaj=28.6 mas, bpa=69.16 degrees
! Estimated noise=1.18257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163762 Jy
! Component: 100  -  total flux cleaned = 0.000183108 Jy
! Component: 150  -  total flux cleaned = 0.000141562 Jy
! Component: 200  -  total flux cleaned = 9.30912e-05 Jy
! Total flux subtracted in 200 components = 9.30912e-05 Jy
! Clean residual min=-0.000186 max=0.000185 Jy/beam
! Clean residual mean=-0.000001 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.0338383 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 295 components and 0.0338383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036126Jy  sigma=0.388052
! Fit after  self-cal, rms=0.036186Jy  sigma=0.387622
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337208 Jy
! Component: 100  -  total flux cleaned = 0.000454772 Jy
! Component: 150  -  total flux cleaned = 0.000426677 Jy
! Component: 200  -  total flux cleaned = 0.000379193 Jy
! Total flux subtracted in 200 components = 0.000379193 Jy
! Clean residual min=-0.000182 max=0.000183 Jy/beam
! Clean residual mean=0.000001 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0342175 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 368 components and 0.0342175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036171Jy  sigma=0.387492
! Fit after  self-cal, rms=0.036168Jy  sigma=0.387384
! Inverting map 
! Added new window around map position (25.5, -77).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207614 Jy
! Component: 100  -  total flux cleaned = 0.000258215 Jy
! Component: 150  -  total flux cleaned = 0.000250189 Jy
! Component: 200  -  total flux cleaned = 0.000233227 Jy
! Total flux subtracted in 200 components = 0.000233227 Jy
! Clean residual min=-0.000344 max=0.000378 Jy/beam
! Clean residual mean=0.000001 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0344507 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 415 components and 0.0344507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036157Jy  sigma=0.387302
! Fit after  self-cal, rms=0.036151Jy  sigma=0.387233
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036151Jy  sigma=0.387233
! Fit after  self-cal, rms=0.036336Jy  sigma=0.387136
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=25.5 mas, bmaj=28.62 mas, bpa=68.56 degrees
! Estimated noise=1.18101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.50717e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118369 Jy
! Component: 150  -  total flux cleaned = 0.000100473 Jy
! Component: 200  -  total flux cleaned = 4.90491e-05 Jy
! Total flux subtracted in 200 components = 4.90491e-05 Jy
! Clean residual min=-0.000330 max=0.000405 Jy/beam
! Clean residual mean=0.000002 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0344998 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 468 components and 0.0344998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036327Jy  sigma=0.387060
! Fit after  self-cal, rms=0.036349Jy  sigma=0.386924
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127619 Jy
! Component: 100  -  total flux cleaned = 0.000136906 Jy
! Component: 150  -  total flux cleaned = 0.000182987 Jy
! Component: 200  -  total flux cleaned = 0.000176004 Jy
! Total flux subtracted in 200 components = 0.000176004 Jy
! Clean residual min=-0.000322 max=0.000400 Jy/beam
! Clean residual mean=0.000002 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0346758 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 511 components and 0.0346758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036342Jy  sigma=0.386871
! Fit after  self-cal, rms=0.036341Jy  sigma=0.386851
! Inverting map 
! Added new window around map position (-75, 79.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230762 Jy
! Component: 100  -  total flux cleaned = 0.000172143 Jy
! Component: 150  -  total flux cleaned = 0.000101291 Jy
! Component: 200  -  total flux cleaned = 6.54088e-05 Jy
! Total flux subtracted in 200 components = 6.54088e-05 Jy
! Clean residual min=-0.000280 max=0.000279 Jy/beam
! Clean residual mean=0.000002 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0347412 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 577 components and 0.0347412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036332Jy  sigma=0.386787
! Fit after  self-cal, rms=0.036339Jy  sigma=0.386759
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201233 Jy
! Component: 100  -  total flux cleaned = 0.000178909 Jy
! Component: 150  -  total flux cleaned = 0.000128501 Jy
! Component: 200  -  total flux cleaned = 5.13969e-05 Jy
! Total flux subtracted in 200 components = 5.13969e-05 Jy
! Clean residual min=-0.000314 max=0.000294 Jy/beam
! Clean residual mean=0.000001 rms=0.000085 Jy/beam
! Combined flux in latest and established models = 0.0347926 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 617 components and 0.0347926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036331Jy  sigma=0.386707
! Fit after  self-cal, rms=0.036310Jy  sigma=0.386531
! Inverting map 
! Added new window around map position (76.5, -46.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000315258 Jy
! Component: 100  -  total flux cleaned = 0.000378251 Jy
! Component: 150  -  total flux cleaned = 0.000338054 Jy
! Component: 200  -  total flux cleaned = 0.000338116 Jy
! Total flux subtracted in 200 components = 0.000338116 Jy
! Clean residual min=-0.000252 max=0.000247 Jy/beam
! Clean residual mean=0.000000 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.0351307 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 665 components and 0.0351307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036301Jy  sigma=0.386472
! Fit after  self-cal, rms=0.036295Jy  sigma=0.386386
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036295Jy  sigma=0.386386
! Fit after  self-cal, rms=0.036316Jy  sigma=0.386355
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=25.7 mas, bmaj=28.81 mas, bpa=68.23 degrees
! Estimated noise=1.17666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299383 Jy
! Component: 100  -  total flux cleaned = 0.00045342 Jy
! Component: 150  -  total flux cleaned = 0.000467546 Jy
! Component: 200  -  total flux cleaned = 0.000503758 Jy
! Total flux subtracted in 200 components = 0.000503758 Jy
! Clean residual min=-0.000240 max=0.000252 Jy/beam
! Clean residual mean=0.000000 rms=0.000092 Jy/beam
! Combined flux in latest and established models = 0.0356345 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 714 components and 0.0356345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036301Jy  sigma=0.386255
! Fit after  self-cal, rms=0.036313Jy  sigma=0.386118
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000437772 Jy
! Component: 100  -  total flux cleaned = 0.000541866 Jy
! Component: 150  -  total flux cleaned = 0.000517941 Jy
! Component: 200  -  total flux cleaned = 0.000485953 Jy
! Total flux subtracted in 200 components = 0.000485953 Jy
! Clean residual min=-0.000265 max=0.000264 Jy/beam
! Clean residual mean=-0.000000 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0361204 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 757 components and 0.0361204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036300Jy  sigma=0.386023
! Fit after  self-cal, rms=0.036298Jy  sigma=0.385977
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=25.48 mas, bmaj=28.64 mas, bpa=67.79 degrees
! Estimated noise=1.17789 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 25.48 x 28.64 at 67.79 degrees (North through East)
! Clean map  min=-0.0031317  max=0.034311 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.27 mas, bmaj=30.08 mas, bpa=61.24 degrees
! Estimated noise=3.26298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00963296 Jy
! Component: 100  -  total flux cleaned = 0.0135621 Jy
! Component: 150  -  total flux cleaned = 0.0167059 Jy
! Component: 200  -  total flux cleaned = 0.019097 Jy
! Total flux subtracted in 200 components = 0.019097 Jy
! Clean residual min=-0.009569 max=0.019255 Jy/beam
! Clean residual mean=0.000160 rms=0.003752 Jy/beam
! Combined flux in latest and established models = 0.019097 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 91 model components to the UV plane model.
! The established model now contains 91 components and 0.019097 Jy
! Inverting map and beam 
! Estimated beam: bmin=25.48 mas, bmaj=28.64 mas, bpa=67.79 degrees
! Estimated noise=1.17789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115582 Jy
! Component: 100  -  total flux cleaned = 0.0136377 Jy
! Component: 150  -  total flux cleaned = 0.0162345 Jy
! Component: 200  -  total flux cleaned = 0.0184855 Jy
! Total flux subtracted in 200 components = 0.0184855 Jy
! Clean residual min=-0.003349 max=0.002956 Jy/beam
! Clean residual mean=0.000098 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.0375825 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 171 components and 0.0375825 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=25.7 mas, bmaj=28.81 mas, bpa=68.23 degrees
! Estimated noise=1.17666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754268 Jy
! Component: 100  -  total flux cleaned = 0.000589433 Jy
! Component: 150  -  total flux cleaned = 0.000199779 Jy
! Component: 200  -  total flux cleaned = 0.000206397 Jy
! Total flux subtracted in 200 components = 0.000206397 Jy
! Clean residual min=-0.002204 max=0.002104 Jy/beam
! Clean residual mean=0.000077 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.0377889 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373864 Jy
! Component: 100  -  total flux cleaned = 0.000481273 Jy
! Component: 150  -  total flux cleaned = 0.000530692 Jy
! Component: 200  -  total flux cleaned = 0.000485939 Jy
! Total flux subtracted in 200 components = 0.000485939 Jy
! Clean residual min=-0.001646 max=0.001568 Jy/beam
! Clean residual mean=0.000062 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0382748 Jy
! Adding 138 model components to the UV plane model.
! The established model now contains 303 components and 0.0382748 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=25.48 mas, bmaj=28.64 mas, bpa=67.79 degrees
! Estimated noise=1.17789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.79162e-05 Jy
! Component: 100  -  total flux cleaned = 1.6849e-05 Jy
! Component: 150  -  total flux cleaned = -1.82788e-05 Jy
! Component: 200  -  total flux cleaned = -0.000116723 Jy
! Total flux subtracted in 200 components = -0.000116723 Jy
! Clean residual min=-0.001231 max=0.001307 Jy/beam
! Clean residual mean=0.000050 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.0381581 Jy
selfcal
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 369 components and 0.0381581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036401Jy  sigma=0.387297
! Fit after  self-cal, rms=0.036370Jy  sigma=0.386624
wmodel J1503+4759_S_map.mod
! Writing 369 model components to file: J1503+4759_S_map.mod
wobs   J1503+4759_S_uvs.fits
! Writing UV FITS file: J1503+4759_S_uvs.fits
wwins  J1503+4759_S_map.win
! wwins: Wrote 4 windows to J1503+4759_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227823 Jy
! Component: 100  -  total flux cleaned = 0.00016434 Jy
! Component: 150  -  total flux cleaned = 0.000239455 Jy
! Component: 200  -  total flux cleaned = 0.000359427 Jy
! Component: 250  -  total flux cleaned = 0.000489293 Jy
! Component: 300  -  total flux cleaned = 0.000550167 Jy
! Component: 350  -  total flux cleaned = 0.000607171 Jy
! Component: 400  -  total flux cleaned = 0.000637421 Jy
! Component: 450  -  total flux cleaned = 0.000666142 Jy
! Component: 500  -  total flux cleaned = 0.000693439 Jy
! Component: 550  -  total flux cleaned = 0.000712777 Jy
! Component: 600  -  total flux cleaned = 0.000743479 Jy
! Component: 650  -  total flux cleaned = 0.000766638 Jy
! Component: 700  -  total flux cleaned = 0.000805786 Jy
! Component: 750  -  total flux cleaned = 0.000869694 Jy
! Component: 800  -  total flux cleaned = 0.000910792 Jy
! Component: 850  -  total flux cleaned = 0.000930672 Jy
! Component: 900  -  total flux cleaned = 0.000945211 Jy
! Component: 950  -  total flux cleaned = 0.000963828 Jy
! Component: 1000  -  total flux cleaned = 0.000968351 Jy
! Component: 1050  -  total flux cleaned = 0.000972803 Jy
! Component: 1100  -  total flux cleaned = 0.000968606 Jy
! Component: 1150  -  total flux cleaned = 0.000964579 Jy
! Component: 1200  -  total flux cleaned = 0.000964625 Jy
! Component: 1250  -  total flux cleaned = 0.000964604 Jy
! Component: 1300  -  total flux cleaned = 0.000941368 Jy
! Component: 1350  -  total flux cleaned = 0.000922434 Jy
! Component: 1400  -  total flux cleaned = 0.000907481 Jy
! Component: 1450  -  total flux cleaned = 0.000889111 Jy
! Component: 1500  -  total flux cleaned = 0.000878294 Jy
! Component: 1550  -  total flux cleaned = 0.000856924 Jy
! Component: 1600  -  total flux cleaned = 0.000846413 Jy
! Component: 1650  -  total flux cleaned = 0.000832544 Jy
! Component: 1700  -  total flux cleaned = 0.000818871 Jy
! Component: 1750  -  total flux cleaned = 0.000805377 Jy
! Component: 1800  -  total flux cleaned = 0.000795331 Jy
! Component: 1850  -  total flux cleaned = 0.0007887 Jy
! Component: 1900  -  total flux cleaned = 0.000769048 Jy
! Component: 1950  -  total flux cleaned = 0.000749456 Jy
! Component: 2000  -  total flux cleaned = 0.000733214 Jy
! Component: 2050  -  total flux cleaned = 0.000713816 Jy
! Component: 2100  -  total flux cleaned = 0.00069117 Jy
! Component: 2150  -  total flux cleaned = 0.000675015 Jy
! Component: 2200  -  total flux cleaned = 0.000658814 Jy
! Component: 2250  -  total flux cleaned = 0.000642613 Jy
! Component: 2300  -  total flux cleaned = 0.000619864 Jy
! Component: 2350  -  total flux cleaned = 0.000606853 Jy
! Component: 2400  -  total flux cleaned = 0.000593824 Jy
! Component: 2450  -  total flux cleaned = 0.000587277 Jy
! Component: 2500  -  total flux cleaned = 0.000574146 Jy
! Component: 2550  -  total flux cleaned = 0.000560918 Jy
! Component: 2600  -  total flux cleaned = 0.000550935 Jy
! Component: 2650  -  total flux cleaned = 0.00053426 Jy
! Component: 2700  -  total flux cleaned = 0.000524201 Jy
! Component: 2750  -  total flux cleaned = 0.00051067 Jy
! Component: 2800  -  total flux cleaned = 0.000497075 Jy
! Component: 2850  -  total flux cleaned = 0.00048679 Jy
! Component: 2900  -  total flux cleaned = 0.000459187 Jy
! Component: 2950  -  total flux cleaned = 0.000438282 Jy
! Component: 3000  -  total flux cleaned = 0.000417214 Jy
! Component: 3050  -  total flux cleaned = 0.000392372 Jy
! Component: 3100  -  total flux cleaned = 0.000367333 Jy
! Component: 3150  -  total flux cleaned = 0.000342045 Jy
! Component: 3200  -  total flux cleaned = 0.000323812 Jy
! Component: 3250  -  total flux cleaned = 0.000301699 Jy
! Component: 3300  -  total flux cleaned = 0.000283142 Jy
! Component: 3350  -  total flux cleaned = 0.000260617 Jy
! Component: 3400  -  total flux cleaned = 0.000237931 Jy
! Component: 3450  -  total flux cleaned = 0.000211082 Jy
! Component: 3500  -  total flux cleaned = 0.000191685 Jy
! Component: 3550  -  total flux cleaned = 0.000164286 Jy
! Component: 3600  -  total flux cleaned = 0.000148468 Jy
! Component: 3650  -  total flux cleaned = 0.000128513 Jy
! Component: 3700  -  total flux cleaned = 0.000108343 Jy
! Component: 3750  -  total flux cleaned = 8.38518e-05 Jy
! Component: 3800  -  total flux cleaned = 6.73406e-05 Jy
! Component: 3850  -  total flux cleaned = 5.06476e-05 Jy
! Component: 3900  -  total flux cleaned = 2.95348e-05 Jy
! Component: 3950  -  total flux cleaned = 1.24172e-05 Jy
! Component: 4000  -  total flux cleaned = -4.84907e-06 Jy
! Component: 4050  -  total flux cleaned = -2.22987e-05 Jy
! Total flux subtracted in 4096 components = -3.99004e-05 Jy
! Clean residual min=-0.000236 max=0.000228 Jy/beam
! Clean residual mean=0.000008 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0381182 Jy
keep
! Adding 472 model components to the UV plane model.
! The established model now contains 841 components and 0.0381182 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1503+4759_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 25.48 x 28.64 at 67.79 degrees (North through East)
! Clean map  min=-0.0063639  max=0.020319 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1503+4759_S_map.fits
wmodel /image_prod/ug002_uva//J1503+4759_S_map.mod
! Writing 841 model components to file: /image_prod/ug002_uva//J1503+4759_S_map.mod
wobs   /image_prod/ug002_uva//J1503+4759_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1503+4759_S_uvs.fits
wwins  /image_prod/ug002_uva//J1503+4759_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1503+4759_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0203188 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000109328 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.61419 1.61419 3.22837 6.45674 12.9135 25.827 51.6539
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  185.852 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1503+4759_S_dfm.log closed on Thu Mar  5 02:03:09 2020