! Started logfile: /image_prod/ug002_uva//J1503+0917_S_dfm.log on Thu Mar  5 02:02:39 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1503+0917_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1503+0917_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.981111 visibilities/baseline/integration-bin.
! Found source: J1503+0917
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7947 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1503+0917_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022879Jy  sigma=7.577328
! Fit after  self-cal, rms=0.667603Jy  sigma=4.955814
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=7.16 mas, bpa=-7.958 degrees
! Estimated noise=1.63954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.254236 Jy
! Component: 100  -  total flux cleaned = 0.3288 Jy
! Total flux subtracted in 100 components = 0.3288 Jy
! Clean residual min=-0.014504 max=0.040957 Jy/beam
! Clean residual mean=-0.000180 rms=0.004384 Jy/beam
! Combined flux in latest and established models = 0.3288 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.3288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109851Jy  sigma=0.720726
! Fit after  self-cal, rms=0.109779Jy  sigma=0.719598
! Inverting map 
! Added new window around map position (-8.5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0421929 Jy
! Component: 100  -  total flux cleaned = 0.0679979 Jy
! Total flux subtracted in 100 components = 0.0679979 Jy
! Clean residual min=-0.009942 max=0.013678 Jy/beam
! Clean residual mean=-0.000084 rms=0.002807 Jy/beam
! Combined flux in latest and established models = 0.396798 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.396798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089813Jy  sigma=0.556702
! Fit after  self-cal, rms=0.088496Jy  sigma=0.546300
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019128 Jy
! Component: 100  -  total flux cleaned = 0.0317797 Jy
! Total flux subtracted in 100 components = 0.0317797 Jy
! Clean residual min=-0.008283 max=0.009816 Jy/beam
! Clean residual mean=-0.000039 rms=0.002182 Jy/beam
! Combined flux in latest and established models = 0.428577 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 0.428578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083364Jy  sigma=0.505536
! Fit after  self-cal, rms=0.083079Jy  sigma=0.503167
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.588 mas, bmaj=7.884 mas, bpa=-8.11 degrees
! Estimated noise=1.11025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114053 Jy
! Component: 100  -  total flux cleaned = 0.0186159 Jy
! Component: 150  -  total flux cleaned = 0.0235756 Jy
! Component: 200  -  total flux cleaned = 0.0259317 Jy
! Total flux subtracted in 200 components = 0.0259317 Jy
! Clean residual min=-0.007319 max=0.005709 Jy/beam
! Clean residual mean=-0.000015 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.454509 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 70 components and 0.454509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080912Jy  sigma=0.489659
! Fit after  self-cal, rms=0.080815Jy  sigma=0.488781
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.588 x 7.884 at -8.11 degrees (North through East)
! Clean map  min=-0.007049  max=0.32714 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.01     KP        1.00     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.97     HN        1.01     KP        0.99     
!   LA        1.01     MK        1.01     NL        0.97     OV        1.01     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.01     
!   LA        0.99     MK        0.98     NL        1.06     OV        0.99     
!   PT        0.99     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.080815Jy  sigma=0.488781
! Fit after  self-cal, rms=0.077937Jy  sigma=0.479324
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.599 mas, bmaj=7.905 mas, bpa=-8.307 degrees
! Estimated noise=1.10818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203086 Jy
! Component: 100  -  total flux cleaned = 0.00237713 Jy
! Component: 150  -  total flux cleaned = 0.00260437 Jy
! Component: 200  -  total flux cleaned = 0.00281432 Jy
! Total flux subtracted in 200 components = 0.00281432 Jy
! Clean residual min=-0.006790 max=0.005162 Jy/beam
! Clean residual mean=-0.000020 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 0.457323 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 85 components and 0.457323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077726Jy  sigma=0.478213
! Fit after  self-cal, rms=0.077713Jy  sigma=0.478139
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077713Jy  sigma=0.478139
! Fit after  self-cal, rms=0.074584Jy  sigma=0.445724
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.598 mas, bmaj=7.875 mas, bpa=-8.283 degrees
! Estimated noise=1.1179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325384 Jy
! Component: 100  -  total flux cleaned = 0.00400781 Jy
! Component: 150  -  total flux cleaned = 0.00440798 Jy
! Component: 200  -  total flux cleaned = 0.00457859 Jy
! Total flux subtracted in 200 components = 0.00457859 Jy
! Clean residual min=-0.003931 max=0.003435 Jy/beam
! Clean residual mean=-0.000007 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.461902 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.461902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074353Jy  sigma=0.444609
! Fit after  self-cal, rms=0.074371Jy  sigma=0.444502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317954 Jy
! Component: 100  -  total flux cleaned = 0.000414365 Jy
! Component: 150  -  total flux cleaned = 0.000460029 Jy
! Component: 200  -  total flux cleaned = 0.00049859 Jy
! Total flux subtracted in 200 components = 0.00049859 Jy
! Clean residual min=-0.003922 max=0.003380 Jy/beam
! Clean residual mean=-0.000006 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.462401 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 103 components and 0.462401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074310Jy  sigma=0.444146
! Fit after  self-cal, rms=0.074305Jy  sigma=0.444109
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074305Jy  sigma=0.444109
! Fit after  self-cal, rms=0.071785Jy  sigma=0.428008
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=7.876 mas, bpa=-8.315 degrees
! Estimated noise=1.1164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598171 Jy
! Component: 100  -  total flux cleaned = 0.000598228 Jy
! Component: 150  -  total flux cleaned = 0.00059618 Jy
! Component: 200  -  total flux cleaned = 0.000623878 Jy
! Total flux subtracted in 200 components = 0.000623878 Jy
! Clean residual min=-0.002091 max=0.002080 Jy/beam
! Clean residual mean=0.000005 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.463025 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 112 components and 0.463025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071748Jy  sigma=0.427750
! Fit after  self-cal, rms=0.071744Jy  sigma=0.427682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.17597e-05 Jy
! Component: 100  -  total flux cleaned = 6.21712e-05 Jy
! Component: 150  -  total flux cleaned = 8.72671e-05 Jy
! Component: 200  -  total flux cleaned = 8.65452e-05 Jy
! Total flux subtracted in 200 components = 8.65452e-05 Jy
! Clean residual min=-0.002049 max=0.002072 Jy/beam
! Clean residual mean=0.000005 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.463111 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 115 components and 0.463111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071723Jy  sigma=0.427525
! Fit after  self-cal, rms=0.071721Jy  sigma=0.427497
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071721Jy  sigma=0.427497
! Fit after  self-cal, rms=0.071742Jy  sigma=0.427478
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.816 mas, bmaj=11.62 mas, bpa=-6.503 degrees
! Estimated noise=1.33087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000838797 Jy
! Component: 100  -  total flux cleaned = 0.000896352 Jy
! Component: 150  -  total flux cleaned = 0.000896151 Jy
! Component: 200  -  total flux cleaned = 0.000839429 Jy
! Total flux subtracted in 200 components = 0.000839429 Jy
! Clean residual min=-0.002066 max=0.002148 Jy/beam
! Clean residual mean=0.000010 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.46395 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 122 components and 0.46395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071733Jy  sigma=0.427431
! Fit after  self-cal, rms=0.071729Jy  sigma=0.427394
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.58027e-05 Jy
! Component: 100  -  total flux cleaned = -5.94816e-05 Jy
! Component: 150  -  total flux cleaned = -7.78266e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109023 Jy
! Total flux subtracted in 200 components = -0.000109023 Jy
! Clean residual min=-0.002075 max=0.002101 Jy/beam
! Clean residual mean=0.000010 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.463841 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 127 components and 0.463841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071727Jy  sigma=0.427372
! Fit after  self-cal, rms=0.071724Jy  sigma=0.427345
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=7.875 mas, bpa=-8.35 degrees
! Estimated noise=1.11654 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.587 x 7.875 at -8.35 degrees (North through East)
! Clean map  min=-0.0019677  max=0.32756 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.155 mas, bmaj=7.153 mas, bpa=-8.206 degrees
! Estimated noise=1.65413 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.256154 Jy
! Component: 100  -  total flux cleaned = 0.335124 Jy
! Component: 150  -  total flux cleaned = 0.377891 Jy
! Component: 200  -  total flux cleaned = 0.404196 Jy
! Total flux subtracted in 200 components = 0.404196 Jy
! Clean residual min=-0.006782 max=0.013892 Jy/beam
! Clean residual mean=-0.000075 rms=0.001820 Jy/beam
! Combined flux in latest and established models = 0.404196 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.404196 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=7.875 mas, bpa=-8.35 degrees
! Estimated noise=1.11654 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207861 Jy
! Component: 100  -  total flux cleaned = 0.0336876 Jy
! Component: 150  -  total flux cleaned = 0.0421188 Jy
! Component: 200  -  total flux cleaned = 0.0477864 Jy
! Total flux subtracted in 200 components = 0.0477864 Jy
! Clean residual min=-0.002807 max=0.005031 Jy/beam
! Clean residual mean=-0.000007 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.451983 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 64 components and 0.451983 Jy
! Inverting map 
! Added new window around map position (-4, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480686 Jy
! Component: 100  -  total flux cleaned = 0.0077177 Jy
! Component: 150  -  total flux cleaned = 0.00971293 Jy
! Component: 200  -  total flux cleaned = 0.0102661 Jy
! Total flux subtracted in 200 components = 0.0102661 Jy
! Clean residual min=-0.002271 max=0.002064 Jy/beam
! Clean residual mean=0.000004 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.462249 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 85 components and 0.462249 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.816 mas, bmaj=11.62 mas, bpa=-6.503 degrees
! Estimated noise=1.33087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000905421 Jy
! Component: 100  -  total flux cleaned = 0.000905182 Jy
! Component: 150  -  total flux cleaned = 0.000817182 Jy
! Component: 200  -  total flux cleaned = 0.000764431 Jy
! Total flux subtracted in 200 components = 0.000764431 Jy
! Clean residual min=-0.002087 max=0.002054 Jy/beam
! Clean residual mean=0.000009 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.463013 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.80331e-05 Jy
! Component: 100  -  total flux cleaned = -9.2167e-05 Jy
! Component: 150  -  total flux cleaned = -0.000151189 Jy
! Component: 200  -  total flux cleaned = -0.000169222 Jy
! Total flux subtracted in 200 components = -0.000169222 Jy
! Clean residual min=-0.002016 max=0.001995 Jy/beam
! Clean residual mean=0.000008 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.462844 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 110 components and 0.462844 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.587 mas, bmaj=7.875 mas, bpa=-8.35 degrees
! Estimated noise=1.11654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.43753e-05 Jy
! Component: 100  -  total flux cleaned = -0.00012895 Jy
! Component: 150  -  total flux cleaned = -6.06382e-05 Jy
! Component: 200  -  total flux cleaned = -2.79424e-05 Jy
! Total flux subtracted in 200 components = -2.79424e-05 Jy
! Clean residual min=-0.002170 max=0.001884 Jy/beam
! Clean residual mean=0.000005 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.462816 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 126 components and 0.462816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071679Jy  sigma=0.426945
! Fit after  self-cal, rms=0.071671Jy  sigma=0.426868
wmodel J1503+0917_S_map.mod
! Writing 126 model components to file: J1503+0917_S_map.mod
wobs   J1503+0917_S_uvs.fits
! Writing UV FITS file: J1503+0917_S_uvs.fits
wwins  J1503+0917_S_map.win
! wwins: Wrote 3 windows to J1503+0917_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000565672 Jy
! Component: 100  -  total flux cleaned = -0.000902374 Jy
! Component: 150  -  total flux cleaned = -0.000903382 Jy
! Component: 200  -  total flux cleaned = -0.000904028 Jy
! Component: 250  -  total flux cleaned = -0.000933227 Jy
! Component: 300  -  total flux cleaned = -0.000904658 Jy
! Component: 350  -  total flux cleaned = -0.000822645 Jy
! Component: 400  -  total flux cleaned = -0.000741967 Jy
! Component: 450  -  total flux cleaned = -0.000558245 Jy
! Component: 500  -  total flux cleaned = -0.000481851 Jy
! Component: 550  -  total flux cleaned = -0.000381676 Jy
! Component: 600  -  total flux cleaned = -0.000357277 Jy
! Component: 650  -  total flux cleaned = -0.000333102 Jy
! Component: 700  -  total flux cleaned = -0.000285242 Jy
! Component: 750  -  total flux cleaned = -0.00021456 Jy
! Component: 800  -  total flux cleaned = -0.000169065 Jy
! Component: 850  -  total flux cleaned = -0.000169432 Jy
! Component: 900  -  total flux cleaned = -0.000147219 Jy
! Component: 950  -  total flux cleaned = -0.000236491 Jy
! Component: 1000  -  total flux cleaned = -0.000214252 Jy
! Component: 1050  -  total flux cleaned = -0.000214523 Jy
! Component: 1100  -  total flux cleaned = -0.00032129 Jy
! Component: 1150  -  total flux cleaned = -0.000236635 Jy
! Component: 1200  -  total flux cleaned = -0.000215947 Jy
! Component: 1250  -  total flux cleaned = -0.000236588 Jy
! Component: 1300  -  total flux cleaned = -0.000134634 Jy
! Component: 1350  -  total flux cleaned = -0.000195393 Jy
! Component: 1400  -  total flux cleaned = -0.000115969 Jy
! Component: 1450  -  total flux cleaned = -0.000135706 Jy
! Component: 1500  -  total flux cleaned = -1.82751e-05 Jy
! Component: 1550  -  total flux cleaned = 2.02001e-05 Jy
! Component: 1600  -  total flux cleaned = 7.75029e-05 Jy
! Component: 1650  -  total flux cleaned = 0.000152903 Jy
! Component: 1700  -  total flux cleaned = 0.000133662 Jy
! Component: 1750  -  total flux cleaned = 0.000133804 Jy
! Component: 1800  -  total flux cleaned = 0.000189115 Jy
! Component: 1850  -  total flux cleaned = 0.00024374 Jy
! Component: 1900  -  total flux cleaned = 0.000315967 Jy
! Component: 1950  -  total flux cleaned = 0.000405197 Jy
! Component: 2000  -  total flux cleaned = 0.000493715 Jy
! Component: 2050  -  total flux cleaned = 0.000493595 Jy
! Component: 2100  -  total flux cleaned = 0.000545839 Jy
! Component: 2150  -  total flux cleaned = 0.000632189 Jy
! Component: 2200  -  total flux cleaned = 0.000700579 Jy
! Component: 2250  -  total flux cleaned = 0.000683923 Jy
! Component: 2300  -  total flux cleaned = 0.000767858 Jy
! Component: 2350  -  total flux cleaned = 0.00078453 Jy
! Component: 2400  -  total flux cleaned = 0.000850863 Jy
! Component: 2450  -  total flux cleaned = 0.000883804 Jy
! Component: 2500  -  total flux cleaned = 0.000965255 Jy
! Component: 2550  -  total flux cleaned = 0.000997595 Jy
! Component: 2600  -  total flux cleaned = 0.00104563 Jy
! Component: 2650  -  total flux cleaned = 0.00112512 Jy
! Component: 2700  -  total flux cleaned = 0.00117273 Jy
! Component: 2750  -  total flux cleaned = 0.00128203 Jy
! Component: 2800  -  total flux cleaned = 0.00121978 Jy
! Component: 2850  -  total flux cleaned = 0.00134329 Jy
! Component: 2900  -  total flux cleaned = 0.00138926 Jy
! Component: 2950  -  total flux cleaned = 0.00148031 Jy
! Component: 3000  -  total flux cleaned = 0.00146508 Jy
! Component: 3050  -  total flux cleaned = 0.00153995 Jy
! Component: 3100  -  total flux cleaned = 0.0015994 Jy
! Component: 3150  -  total flux cleaned = 0.00167338 Jy
! Component: 3200  -  total flux cleaned = 0.00170287 Jy
! Component: 3250  -  total flux cleaned = 0.00183414 Jy
! Component: 3300  -  total flux cleaned = 0.00189196 Jy
! Component: 3350  -  total flux cleaned = 0.00193521 Jy
! Component: 3400  -  total flux cleaned = 0.00194932 Jy
! Component: 3450  -  total flux cleaned = 0.00199203 Jy
! Component: 3500  -  total flux cleaned = 0.00207675 Jy
! Component: 3550  -  total flux cleaned = 0.0021749 Jy
! Component: 3600  -  total flux cleaned = 0.00218873 Jy
! Component: 3650  -  total flux cleaned = 0.00223029 Jy
! Component: 3700  -  total flux cleaned = 0.00227178 Jy
! Component: 3750  -  total flux cleaned = 0.00232647 Jy
! Component: 3800  -  total flux cleaned = 0.00238096 Jy
! Component: 3850  -  total flux cleaned = 0.00244843 Jy
! Component: 3900  -  total flux cleaned = 0.00250216 Jy
! Component: 3950  -  total flux cleaned = 0.00258227 Jy
! Component: 4000  -  total flux cleaned = 0.00258232 Jy
! Component: 4050  -  total flux cleaned = 0.00263497 Jy
! Total flux subtracted in 4096 components = 0.0026875 Jy
! Clean residual min=-0.000747 max=0.000758 Jy/beam
! Clean residual mean=0.000001 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.465503 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 429 components and 0.465503 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1503+0917_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.587 x 7.875 at -8.35 degrees (North through East)
! Clean map  min=-0.0014406  max=0.32753 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1503+0917_S_map.fits
wmodel /image_prod/ug002_uva//J1503+0917_S_map.mod
! Writing 429 model components to file: /image_prod/ug002_uva//J1503+0917_S_map.mod
wobs   /image_prod/ug002_uva//J1503+0917_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1503+0917_S_uvs.fits
wwins  /image_prod/ug002_uva//J1503+0917_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1503+0917_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.327525 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00023973 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.219583 0.219583 0.439166 0.878333 1.75667 3.51333 7.02666 14.0533 28.1066 56.2133
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.327 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1366.22 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1503+0917_S_dfm.log closed on Thu Mar  5 02:02:43 2020