! Started logfile: /image_prod/ug002_uva//J1451-0127_X_dfm.log on Thu Mar  5 01:57:08 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1451-0127_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1451-0127_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.818056 visibilities/baseline/integration-bin.
! Found source: J1451-0127
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 21204 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1451-0127_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010972Jy  sigma=9.092322
! Fit after  self-cal, rms=0.885122Jy  sigma=7.889130
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7383 mas, bmaj=1.724 mas, bpa=3.877 degrees
! Estimated noise=0.975359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0835154 Jy
! Component: 100  -  total flux cleaned = 0.114867 Jy
! Total flux subtracted in 100 components = 0.114867 Jy
! Clean residual min=-0.006195 max=0.014995 Jy/beam
! Clean residual mean=-0.000007 rms=0.001696 Jy/beam
! Combined flux in latest and established models = 0.114867 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.114867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070657Jy  sigma=0.596389
! Fit after  self-cal, rms=0.070254Jy  sigma=0.593044
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182176 Jy
! Component: 100  -  total flux cleaned = 0.0284306 Jy
! Total flux subtracted in 100 components = 0.0284306 Jy
! Clean residual min=-0.004099 max=0.008248 Jy/beam
! Clean residual mean=-0.000004 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.143297 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 11 components and 0.143297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063691Jy  sigma=0.523140
! Fit after  self-cal, rms=0.063623Jy  sigma=0.522522
! Inverting map 
! Added new window around map position (2.4, 16.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00805619 Jy
! Component: 100  -  total flux cleaned = 0.0130462 Jy
! Total flux subtracted in 100 components = 0.0130462 Jy
! Clean residual min=-0.004002 max=0.006617 Jy/beam
! Clean residual mean=-0.000003 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.156343 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.156343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062140Jy  sigma=0.506019
! Fit after  self-cal, rms=0.062078Jy  sigma=0.505312
! Inverting map 
! Added new window around map position (1.2, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0059029 Jy
! Component: 100  -  total flux cleaned = 0.0095578 Jy
! Total flux subtracted in 100 components = 0.0095578 Jy
! Clean residual min=-0.003484 max=0.005350 Jy/beam
! Clean residual mean=-0.000002 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.165901 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 30 components and 0.165901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061337Jy  sigma=0.496815
! Fit after  self-cal, rms=0.061276Jy  sigma=0.496162
! Inverting map 
! Added new window around map position (-2, -16.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473551 Jy
! Component: 100  -  total flux cleaned = 0.00761829 Jy
! Total flux subtracted in 100 components = 0.00761829 Jy
! Clean residual min=-0.003283 max=0.003067 Jy/beam
! Clean residual mean=-0.000002 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.173519 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.173519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060903Jy  sigma=0.491998
! Fit after  self-cal, rms=0.060874Jy  sigma=0.491719
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.006 mas, bpa=4.979 degrees
! Estimated noise=0.552892 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303247 Jy
! Component: 100  -  total flux cleaned = 0.00495989 Jy
! Component: 150  -  total flux cleaned = 0.00593172 Jy
! Component: 200  -  total flux cleaned = 0.00612204 Jy
! Total flux subtracted in 200 components = 0.00612204 Jy
! Clean residual min=-0.002710 max=0.002800 Jy/beam
! Clean residual mean=-0.000003 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.179641 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 57 components and 0.179641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060702Jy  sigma=0.489873
! Fit after  self-cal, rms=0.060695Jy  sigma=0.489764
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9129 x 2.006 at 4.979 degrees (North through East)
! Clean map  min=-0.0027158  max=0.11325 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        0.99     KP        1.05     
!   LA        0.97     MK        0.99     NL        1.04     OV        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.04     KP        1.02     
!   LA        0.97     MK        0.95     NL        1.02     OV        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.08     KP        1.02     
!   LA        0.99     MK        0.96     NL        1.05     OV        0.98     
!   SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.02     KP        1.05     
!   LA        1.01     MK        0.98     NL        1.01     OV        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.05     KP        1.04     
!   LA        1.00     MK        1.05     NL        0.99     OV        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.06     KP        1.04     
!   LA        0.97     MK        0.99     NL        1.04     OV        1.04     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.02     KP        1.04     
!   LA        0.97     MK        0.98     NL        1.02     OV        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.98     KP        1.03     
!   LA        0.97     MK        0.98     NL        1.01     OV        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.93     KP        1.06     
!   LA        0.99     MK        1.03     NL        1.02     OV        1.01     
!   SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.03     KP        1.05     
!   LA        0.97     MK        1.00     NL        1.03     OV        1.02     
!   SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.02     KP        1.03     
!   LA        0.98     MK        0.93     NL        1.07     OV        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        1.04     
!   LA        1.01     MK        0.97     NL        1.04     OV        1.01     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.060695Jy  sigma=0.489764
! Fit after  self-cal, rms=0.059856Jy  sigma=0.487182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9111 mas, bmaj=1.998 mas, bpa=5.127 degrees
! Estimated noise=0.550434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.12994e-05 Jy
! Component: 100  -  total flux cleaned = -3.4258e-05 Jy
! Component: 150  -  total flux cleaned = -7.43659e-05 Jy
! Component: 200  -  total flux cleaned = -7.33895e-05 Jy
! Total flux subtracted in 200 components = -7.33895e-05 Jy
! Clean residual min=-0.002481 max=0.002365 Jy/beam
! Clean residual mean=-0.000003 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.179568 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 0.179568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059785Jy  sigma=0.486526
! Fit after  self-cal, rms=0.059780Jy  sigma=0.486456
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059780Jy  sigma=0.486456
! Fit after  self-cal, rms=0.061072Jy  sigma=0.481343
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9151 mas, bmaj=2.007 mas, bpa=5.794 degrees
! Estimated noise=0.552993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00041122 Jy
! Component: 100  -  total flux cleaned = -0.000345323 Jy
! Component: 150  -  total flux cleaned = -0.000289657 Jy
! Component: 200  -  total flux cleaned = -0.000240107 Jy
! Total flux subtracted in 200 components = -0.000240107 Jy
! Clean residual min=-0.001803 max=0.001914 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.179328 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 85 components and 0.179328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061039Jy  sigma=0.481081
! Fit after  self-cal, rms=0.061068Jy  sigma=0.481003
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (29.2, 45.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138347 Jy
! Component: 100  -  total flux cleaned = 0.00181993 Jy
! Component: 150  -  total flux cleaned = 0.0022559 Jy
! Component: 200  -  total flux cleaned = 0.00245658 Jy
! Total flux subtracted in 200 components = 0.00245658 Jy
! Clean residual min=-0.001629 max=0.001623 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.181785 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.181785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061014Jy  sigma=0.480517
! Fit after  self-cal, rms=0.061011Jy  sigma=0.480481
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061011Jy  sigma=0.480481
! Fit after  self-cal, rms=0.061043Jy  sigma=0.480271
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=2.007 mas, bpa=5.979 degrees
! Estimated noise=0.551681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.46838e-05 Jy
! Component: 100  -  total flux cleaned = 8.96869e-05 Jy
! Component: 150  -  total flux cleaned = 0.000235018 Jy
! Component: 200  -  total flux cleaned = 0.00041164 Jy
! Total flux subtracted in 200 components = 0.00041164 Jy
! Clean residual min=-0.001624 max=0.001491 Jy/beam
! Clean residual mean=-0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.182196 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 0.182196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061019Jy  sigma=0.480098
! Fit after  self-cal, rms=0.061022Jy  sigma=0.480089
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157912 Jy
! Component: 100  -  total flux cleaned = 0.000278362 Jy
! Component: 150  -  total flux cleaned = 0.000371465 Jy
! Component: 200  -  total flux cleaned = 0.000459542 Jy
! Total flux subtracted in 200 components = 0.000459542 Jy
! Clean residual min=-0.001586 max=0.001460 Jy/beam
! Clean residual mean=-0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.182656 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 120 components and 0.182656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061010Jy  sigma=0.479998
! Fit after  self-cal, rms=0.061010Jy  sigma=0.479994
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061010Jy  sigma=0.479994
! Fit after  self-cal, rms=0.060920Jy  sigma=0.479960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.027 mas, bmaj=3.227 mas, bpa=8.501 degrees
! Estimated noise=0.676833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000624437 Jy
! Component: 100  -  total flux cleaned = 0.000758804 Jy
! Component: 150  -  total flux cleaned = 0.000781441 Jy
! Component: 200  -  total flux cleaned = 0.000838294 Jy
! Total flux subtracted in 200 components = 0.000838294 Jy
! Clean residual min=-0.001753 max=0.001893 Jy/beam
! Clean residual mean=-0.000003 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.183494 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 129 components and 0.183494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060927Jy  sigma=0.479954
! Fit after  self-cal, rms=0.060930Jy  sigma=0.479939
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103821 Jy
! Component: 100  -  total flux cleaned = 0.000173134 Jy
! Component: 150  -  total flux cleaned = 0.000217547 Jy
! Component: 200  -  total flux cleaned = 0.000244152 Jy
! Total flux subtracted in 200 components = 0.000244152 Jy
! Clean residual min=-0.001676 max=0.001845 Jy/beam
! Clean residual mean=-0.000003 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.183738 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 134 components and 0.183738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060937Jy  sigma=0.479985
! Fit after  self-cal, rms=0.060938Jy  sigma=0.479980
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9125 mas, bmaj=2.006 mas, bpa=6.095 degrees
! Estimated noise=0.550776 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9125 x 2.006 at 6.095 degrees (North through East)
! Clean map  min=-0.0014579  max=0.11307 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7383 mas, bmaj=1.723 mas, bpa=5.06 degrees
! Estimated noise=0.966057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0825901 Jy
! Component: 100  -  total flux cleaned = 0.114923 Jy
! Component: 150  -  total flux cleaned = 0.132625 Jy
! Component: 200  -  total flux cleaned = 0.143581 Jy
! Total flux subtracted in 200 components = 0.143581 Jy
! Clean residual min=-0.003286 max=0.006041 Jy/beam
! Clean residual mean=-0.000004 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.143581 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.143581 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9125 mas, bmaj=2.006 mas, bpa=6.095 degrees
! Estimated noise=0.550776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012003 Jy
! Component: 100  -  total flux cleaned = 0.019533 Jy
! Component: 150  -  total flux cleaned = 0.0244611 Jy
! Component: 200  -  total flux cleaned = 0.0278762 Jy
! Total flux subtracted in 200 components = 0.0278762 Jy
! Clean residual min=-0.001891 max=0.002249 Jy/beam
! Clean residual mean=-0.000003 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.171457 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 0.171457 Jy
! Inverting map 
! Added new window around map position (-1, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262558 Jy
! Component: 100  -  total flux cleaned = 0.00462445 Jy
! Component: 150  -  total flux cleaned = 0.0062167 Jy
! Component: 200  -  total flux cleaned = 0.00727843 Jy
! Total flux subtracted in 200 components = 0.00727843 Jy
! Clean residual min=-0.001485 max=0.001455 Jy/beam
! Clean residual mean=-0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.178736 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 68 components and 0.178736 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.027 mas, bmaj=3.227 mas, bpa=8.501 degrees
! Estimated noise=0.676833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191283 Jy
! Component: 100  -  total flux cleaned = 0.00316576 Jy
! Component: 150  -  total flux cleaned = 0.00405785 Jy
! Component: 200  -  total flux cleaned = 0.0044674 Jy
! Total flux subtracted in 200 components = 0.0044674 Jy
! Clean residual min=-0.001797 max=0.001955 Jy/beam
! Clean residual mean=-0.000003 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.183203 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138253 Jy
! Component: 100  -  total flux cleaned = 0.00020058 Jy
! Component: 150  -  total flux cleaned = 0.000258611 Jy
! Component: 200  -  total flux cleaned = 0.000276659 Jy
! Total flux subtracted in 200 components = 0.000276659 Jy
! Clean residual min=-0.001720 max=0.001909 Jy/beam
! Clean residual mean=-0.000003 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.18348 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 106 components and 0.18348 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9125 mas, bmaj=2.006 mas, bpa=6.095 degrees
! Estimated noise=0.550776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352006 Jy
! Component: 100  -  total flux cleaned = -0.000318992 Jy
! Component: 150  -  total flux cleaned = -0.00034661 Jy
! Component: 200  -  total flux cleaned = -0.0003473 Jy
! Total flux subtracted in 200 components = -0.0003473 Jy
! Clean residual min=-0.001451 max=0.001400 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.183132 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.183133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060909Jy  sigma=0.479713
! Fit after  self-cal, rms=0.060890Jy  sigma=0.479639
wmodel J1451-0127_X_map.mod
! Writing 122 model components to file: J1451-0127_X_map.mod
wobs   J1451-0127_X_uvs.fits
! Writing UV FITS file: J1451-0127_X_uvs.fits
wwins  J1451-0127_X_map.win
! wwins: Wrote 6 windows to J1451-0127_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148979 Jy
! Component: 100  -  total flux cleaned = 0.000317081 Jy
! Component: 150  -  total flux cleaned = 0.000408377 Jy
! Component: 200  -  total flux cleaned = 0.00047439 Jy
! Component: 250  -  total flux cleaned = 0.000644475 Jy
! Component: 300  -  total flux cleaned = 0.000726607 Jy
! Component: 350  -  total flux cleaned = 0.000826691 Jy
! Component: 400  -  total flux cleaned = 0.00096333 Jy
! Component: 450  -  total flux cleaned = 0.00109678 Jy
! Component: 500  -  total flux cleaned = 0.00120859 Jy
! Component: 550  -  total flux cleaned = 0.00139079 Jy
! Component: 600  -  total flux cleaned = 0.00151577 Jy
! Component: 650  -  total flux cleaned = 0.00163843 Jy
! Component: 700  -  total flux cleaned = 0.00180961 Jy
! Component: 750  -  total flux cleaned = 0.00185995 Jy
! Component: 800  -  total flux cleaned = 0.00199132 Jy
! Component: 850  -  total flux cleaned = 0.00200706 Jy
! Component: 900  -  total flux cleaned = 0.00210216 Jy
! Component: 950  -  total flux cleaned = 0.00216442 Jy
! Component: 1000  -  total flux cleaned = 0.00227121 Jy
! Component: 1050  -  total flux cleaned = 0.00231624 Jy
! Component: 1100  -  total flux cleaned = 0.0023754 Jy
! Component: 1150  -  total flux cleaned = 0.00243353 Jy
! Component: 1200  -  total flux cleaned = 0.00249078 Jy
! Component: 1250  -  total flux cleaned = 0.00254708 Jy
! Component: 1300  -  total flux cleaned = 0.00257496 Jy
! Component: 1350  -  total flux cleaned = 0.00261606 Jy
! Component: 1400  -  total flux cleaned = 0.00261613 Jy
! Component: 1450  -  total flux cleaned = 0.00273659 Jy
! Component: 1500  -  total flux cleaned = 0.00273674 Jy
! Component: 1550  -  total flux cleaned = 0.0028545 Jy
! Component: 1600  -  total flux cleaned = 0.00291898 Jy
! Component: 1650  -  total flux cleaned = 0.00294445 Jy
! Component: 1700  -  total flux cleaned = 0.00299509 Jy
! Component: 1750  -  total flux cleaned = 0.00306992 Jy
! Component: 1800  -  total flux cleaned = 0.00315571 Jy
! Component: 1850  -  total flux cleaned = 0.00316772 Jy
! Component: 1900  -  total flux cleaned = 0.00322763 Jy
! Component: 1950  -  total flux cleaned = 0.00323937 Jy
! Component: 2000  -  total flux cleaned = 0.0032863 Jy
! Component: 2050  -  total flux cleaned = 0.00334428 Jy
! Component: 2100  -  total flux cleaned = 0.00337868 Jy
! Component: 2150  -  total flux cleaned = 0.00336724 Jy
! Component: 2200  -  total flux cleaned = 0.00342377 Jy
! Component: 2250  -  total flux cleaned = 0.00344612 Jy
! Component: 2300  -  total flux cleaned = 0.00344601 Jy
! Component: 2350  -  total flux cleaned = 0.00347897 Jy
! Component: 2400  -  total flux cleaned = 0.00354434 Jy
! Component: 2450  -  total flux cleaned = 0.00351196 Jy
! Component: 2500  -  total flux cleaned = 0.00352276 Jy
! Component: 2550  -  total flux cleaned = 0.0035757 Jy
! Component: 2600  -  total flux cleaned = 0.0036282 Jy
! Component: 2650  -  total flux cleaned = 0.00365953 Jy
! Component: 2700  -  total flux cleaned = 0.00371127 Jy
! Component: 2750  -  total flux cleaned = 0.00369086 Jy
! Component: 2800  -  total flux cleaned = 0.00372132 Jy
! Component: 2850  -  total flux cleaned = 0.00376161 Jy
! Component: 2900  -  total flux cleaned = 0.00376152 Jy
! Component: 2950  -  total flux cleaned = 0.0037615 Jy
! Component: 3000  -  total flux cleaned = 0.00378109 Jy
! Component: 3050  -  total flux cleaned = 0.00380064 Jy
! Component: 3100  -  total flux cleaned = 0.0038006 Jy
! Component: 3150  -  total flux cleaned = 0.00380071 Jy
! Component: 3200  -  total flux cleaned = 0.00381992 Jy
! Component: 3250  -  total flux cleaned = 0.00383893 Jy
! Component: 3300  -  total flux cleaned = 0.00386728 Jy
! Component: 3350  -  total flux cleaned = 0.00385789 Jy
! Component: 3400  -  total flux cleaned = 0.00389522 Jy
! Component: 3450  -  total flux cleaned = 0.00388593 Jy
! Component: 3500  -  total flux cleaned = 0.00391351 Jy
! Component: 3550  -  total flux cleaned = 0.00388611 Jy
! Component: 3600  -  total flux cleaned = 0.00393153 Jy
! Component: 3650  -  total flux cleaned = 0.00397666 Jy
! Component: 3700  -  total flux cleaned = 0.00398558 Jy
! Component: 3750  -  total flux cleaned = 0.00398561 Jy
! Component: 3800  -  total flux cleaned = 0.00400331 Jy
! Component: 3850  -  total flux cleaned = 0.00403863 Jy
! Component: 3900  -  total flux cleaned = 0.00403859 Jy
! Component: 3950  -  total flux cleaned = 0.00404727 Jy
! Component: 4000  -  total flux cleaned = 0.00405593 Jy
! Component: 4050  -  total flux cleaned = 0.00404736 Jy
! Total flux subtracted in 4096 components = 0.00403026 Jy
! Clean residual min=-0.000524 max=0.000453 Jy/beam
! Clean residual mean=-0.000000 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.187163 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 447 components and 0.187163 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1451-0127_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9125 x 2.006 at 6.095 degrees (North through East)
! Clean map  min=-0.0008924  max=0.11372 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1451-0127_X_map.fits
wmodel /image_prod/ug002_uva//J1451-0127_X_map.mod
! Writing 447 model components to file: /image_prod/ug002_uva//J1451-0127_X_map.mod
wobs   /image_prod/ug002_uva//J1451-0127_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1451-0127_X_uvs.fits
wwins  /image_prod/ug002_uva//J1451-0127_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1451-0127_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.113715 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148114 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.390751 0.390751 0.781502 1.563 3.12601 6.25202 12.504 25.0081 50.0161
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  767.752 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1451-0127_X_dfm.log closed on Thu Mar  5 01:57:13 2020