! Started logfile: /image_prod/ug002_uva//J1448+5326_X_b_dfm.log on Thu Mar  5 01:56:02 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1448+5326_X_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1448+5326_X_b_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.928148 visibilities/baseline/integration-bin.
! Found source: J1448+5326
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30072 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1448+5326_X_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002427Jy  sigma=8.992527
! Fit after  self-cal, rms=0.942533Jy  sigma=8.454037
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7608 mas, bmaj=0.9878 mas, bpa=-25.05 degrees
! Estimated noise=0.992503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0418005 Jy
! Component: 100  -  total flux cleaned = 0.0547322 Jy
! Total flux subtracted in 100 components = 0.0547322 Jy
! Clean residual min=-0.004287 max=0.012597 Jy/beam
! Clean residual mean=0.000010 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.0547322 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0547322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063305Jy  sigma=0.529300
! Fit after  self-cal, rms=0.062439Jy  sigma=0.521340
! Inverting map 
! Added new window around map position (-8.4, -5.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124276 Jy
! Component: 100  -  total flux cleaned = 0.0195456 Jy
! Total flux subtracted in 100 components = 0.0195456 Jy
! Clean residual min=-0.002968 max=0.005918 Jy/beam
! Clean residual mean=0.000006 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0742778 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 17 components and 0.0742779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059223Jy  sigma=0.488740
! Fit after  self-cal, rms=0.058903Jy  sigma=0.486216
! Inverting map 
! Added new window around map position (-7.4, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662018 Jy
! Component: 100  -  total flux cleaned = 0.0112344 Jy
! Total flux subtracted in 100 components = 0.0112344 Jy
! Clean residual min=-0.002631 max=0.002647 Jy/beam
! Clean residual mean=0.000004 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0855123 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.0855123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057800Jy  sigma=0.474646
! Fit after  self-cal, rms=0.057746Jy  sigma=0.474230
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.266 mas, bpa=-21.36 degrees
! Estimated noise=0.46309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0060527 Jy
! Component: 100  -  total flux cleaned = 0.0100399 Jy
! Component: 150  -  total flux cleaned = 0.0128901 Jy
! Component: 200  -  total flux cleaned = 0.0149823 Jy
! Total flux subtracted in 200 components = 0.0149823 Jy
! Clean residual min=-0.001483 max=0.001695 Jy/beam
! Clean residual mean=-0.000007 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.100495 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 43 components and 0.100495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057020Jy  sigma=0.466492
! Fit after  self-cal, rms=0.056980Jy  sigma=0.466123
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 1.266 at -21.36 degrees (North through East)
! Clean map  min=-0.0013601  max=0.059641 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.93     KP        1.01     
!   LA        0.95     MK        1.08     NL        1.01     OV        1.00     
!   PT        0.93     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.98     KP        0.97     
!   LA        0.98     MK        1.13     NL        1.01     OV        0.96     
!   PT        0.89     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.94     KP        0.96     
!   LA        0.92     MK        1.12     NL        1.01     OV        1.01     
!   PT        0.90     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.92     KP        0.98     
!   LA        0.95     MK        1.05     NL        1.01     OV        0.96     
!   PT        0.93     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.91     KP        1.03     
!   LA        0.98     MK        1.01     NL        0.96     OV        0.98     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.93     KP        0.99     
!   LA        0.96     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.07     NL        1.03     OV        0.99     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.92     KP        1.05     
!   LA        0.95     MK        1.04     NL        0.97     OV        1.00     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.89     KP        0.96     
!   LA        0.95     MK        1.15     NL        1.00     OV        1.03     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.94     KP        0.99     
!   LA        0.98     MK        1.10     NL        1.05     OV        0.97     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.91     KP        1.05     
!   LA        0.97     MK        1.02     NL        0.95     OV        1.02     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.93     KP        0.94     
!   LA        0.98     MK        0.98     NL        0.98     OV        1.04     
!   PT        0.89     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.056980Jy  sigma=0.466123
! Fit after  self-cal, rms=0.055905Jy  sigma=0.464437
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=1.281 mas, bpa=-21.33 degrees
! Estimated noise=0.454619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012211 Jy
! Component: 100  -  total flux cleaned = 0.00163985 Jy
! Component: 150  -  total flux cleaned = 0.00185868 Jy
! Component: 200  -  total flux cleaned = 0.00201432 Jy
! Total flux subtracted in 200 components = 0.00201432 Jy
! Clean residual min=-0.001185 max=0.001230 Jy/beam
! Clean residual mean=-0.000009 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.102509 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.102509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055865Jy  sigma=0.464031
! Fit after  self-cal, rms=0.055877Jy  sigma=0.463921
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055877Jy  sigma=0.463921
! Fit after  self-cal, rms=0.056874Jy  sigma=0.462211
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.281 mas, bpa=-21.64 degrees
! Estimated noise=0.455479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000702818 Jy
! Component: 100  -  total flux cleaned = 0.000862973 Jy
! Component: 150  -  total flux cleaned = 0.000974826 Jy
! Component: 200  -  total flux cleaned = 0.00101466 Jy
! Total flux subtracted in 200 components = 0.00101466 Jy
! Clean residual min=-0.000830 max=0.001021 Jy/beam
! Clean residual mean=-0.000006 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.103524 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.103524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056860Jy  sigma=0.462089
! Fit after  self-cal, rms=0.056897Jy  sigma=0.462005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -10.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407381 Jy
! Component: 100  -  total flux cleaned = 0.000635354 Jy
! Component: 150  -  total flux cleaned = 0.000637545 Jy
! Component: 200  -  total flux cleaned = 0.000621497 Jy
! Total flux subtracted in 200 components = 0.000621497 Jy
! Clean residual min=-0.000830 max=0.000885 Jy/beam
! Clean residual mean=-0.000007 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.104145 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.104145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056877Jy  sigma=0.461824
! Fit after  self-cal, rms=0.056874Jy  sigma=0.461807
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056874Jy  sigma=0.461807
! Fit after  self-cal, rms=0.056832Jy  sigma=0.461766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=1.28 mas, bpa=-21.92 degrees
! Estimated noise=0.454967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394507 Jy
! Component: 100  -  total flux cleaned = 0.000464502 Jy
! Component: 150  -  total flux cleaned = 0.000509088 Jy
! Component: 200  -  total flux cleaned = 0.000508836 Jy
! Total flux subtracted in 200 components = 0.000508836 Jy
! Clean residual min=-0.000816 max=0.000860 Jy/beam
! Clean residual mean=-0.000006 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.104654 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 84 components and 0.104654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056823Jy  sigma=0.461680
! Fit after  self-cal, rms=0.056821Jy  sigma=0.461672
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141216 Jy
! Component: 100  -  total flux cleaned = 0.00014065 Jy
! Component: 150  -  total flux cleaned = 0.000128347 Jy
! Component: 200  -  total flux cleaned = 0.000117116 Jy
! Total flux subtracted in 200 components = 0.000117116 Jy
! Clean residual min=-0.000806 max=0.000855 Jy/beam
! Clean residual mean=-0.000006 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.104771 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 90 components and 0.104771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056816Jy  sigma=0.461627
! Fit after  self-cal, rms=0.056815Jy  sigma=0.461626
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056815Jy  sigma=0.461626
! Fit after  self-cal, rms=0.056775Jy  sigma=0.461612
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.323 mas, bmaj=2.398 mas, bpa=-89.29 degrees
! Estimated noise=0.572172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218363 Jy
! Component: 100  -  total flux cleaned = 0.000202892 Jy
! Component: 150  -  total flux cleaned = 0.000167591 Jy
! Component: 200  -  total flux cleaned = 0.000167921 Jy
! Total flux subtracted in 200 components = 0.000167921 Jy
! Clean residual min=-0.000894 max=0.000900 Jy/beam
! Clean residual mean=-0.000012 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.104939 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.104939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056772Jy  sigma=0.461585
! Fit after  self-cal, rms=0.056769Jy  sigma=0.461572
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.57957e-05 Jy
! Component: 100  -  total flux cleaned = -2.51746e-05 Jy
! Component: 150  -  total flux cleaned = -3.39253e-05 Jy
! Component: 200  -  total flux cleaned = -4.15205e-05 Jy
! Total flux subtracted in 200 components = -4.15205e-05 Jy
! Clean residual min=-0.000876 max=0.000909 Jy/beam
! Clean residual mean=-0.000012 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.104897 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 103 components and 0.104897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056768Jy  sigma=0.461567
! Fit after  self-cal, rms=0.056767Jy  sigma=0.461562
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.28 mas, bpa=-22.07 degrees
! Estimated noise=0.454709 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 1.28 at -22.07 degrees (North through East)
! Clean map  min=-0.00095128  max=0.057823 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7575 mas, bmaj=0.9984 mas, bpa=-25.1 degrees
! Estimated noise=0.978664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415645 Jy
! Component: 100  -  total flux cleaned = 0.0587439 Jy
! Component: 150  -  total flux cleaned = 0.0697727 Jy
! Component: 200  -  total flux cleaned = 0.0774208 Jy
! Total flux subtracted in 200 components = 0.0774208 Jy
! Clean residual min=-0.002805 max=0.004288 Jy/beam
! Clean residual mean=0.000006 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.0774208 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0774208 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.28 mas, bpa=-22.07 degrees
! Estimated noise=0.454709 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818526 Jy
! Component: 100  -  total flux cleaned = 0.0134604 Jy
! Component: 150  -  total flux cleaned = 0.0171425 Jy
! Component: 200  -  total flux cleaned = 0.0197649 Jy
! Total flux subtracted in 200 components = 0.0197649 Jy
! Clean residual min=-0.001158 max=0.001711 Jy/beam
! Clean residual mean=-0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0971857 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 33 components and 0.0971857 Jy
! Inverting map 
! Added new window around map position (-1.2, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203496 Jy
! Component: 100  -  total flux cleaned = 0.00362771 Jy
! Component: 150  -  total flux cleaned = 0.00477522 Jy
! Component: 200  -  total flux cleaned = 0.00555489 Jy
! Total flux subtracted in 200 components = 0.00555489 Jy
! Clean residual min=-0.000852 max=0.000959 Jy/beam
! Clean residual mean=-0.000005 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.102741 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 54 components and 0.102741 Jy
! Inverting map 
! Added new window around map position (17.4, 30).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000816688 Jy
! Component: 100  -  total flux cleaned = 0.0014395 Jy
! Component: 150  -  total flux cleaned = 0.00195068 Jy
! Component: 200  -  total flux cleaned = 0.00237331 Jy
! Total flux subtracted in 200 components = 0.00237331 Jy
! Clean residual min=-0.000806 max=0.000842 Jy/beam
! Clean residual mean=-0.000005 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.105114 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 66 components and 0.105114 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.323 mas, bmaj=2.398 mas, bpa=-89.29 degrees
! Estimated noise=0.572172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029965 Jy
! Component: 100  -  total flux cleaned = 0.000402036 Jy
! Component: 150  -  total flux cleaned = 0.000519187 Jy
! Component: 200  -  total flux cleaned = 0.000621975 Jy
! Total flux subtracted in 200 components = 0.000621975 Jy
! Clean residual min=-0.000834 max=0.000879 Jy/beam
! Clean residual mean=-0.000010 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.105736 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.95397e-05 Jy
! Component: 100  -  total flux cleaned = 5.14007e-05 Jy
! Component: 150  -  total flux cleaned = 7.32115e-05 Jy
! Component: 200  -  total flux cleaned = 9.36349e-05 Jy
! Total flux subtracted in 200 components = 9.36349e-05 Jy
! Clean residual min=-0.000824 max=0.000881 Jy/beam
! Clean residual mean=-0.000010 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.10583 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 96 components and 0.10583 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.28 mas, bpa=-22.07 degrees
! Estimated noise=0.454709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189231 Jy
! Component: 100  -  total flux cleaned = 0.000220581 Jy
! Component: 150  -  total flux cleaned = 0.000249931 Jy
! Component: 200  -  total flux cleaned = 0.000251001 Jy
! Total flux subtracted in 200 components = 0.000251001 Jy
! Clean residual min=-0.000802 max=0.000819 Jy/beam
! Clean residual mean=-0.000004 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.106081 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.106081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056759Jy  sigma=0.461490
! Fit after  self-cal, rms=0.056755Jy  sigma=0.461452
wmodel J1448+5326_X_b_map.mod
! Writing 114 model components to file: J1448+5326_X_b_map.mod
wobs   J1448+5326_X_b_uvs.fits
! Writing UV FITS file: J1448+5326_X_b_uvs.fits
wwins  J1448+5326_X_b_map.win
! wwins: Wrote 6 windows to J1448+5326_X_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176234 Jy
! Component: 100  -  total flux cleaned = 0.000262345 Jy
! Component: 150  -  total flux cleaned = 0.00033182 Jy
! Component: 200  -  total flux cleaned = 0.00034543 Jy
! Component: 250  -  total flux cleaned = 0.000371445 Jy
! Component: 300  -  total flux cleaned = 0.000396883 Jy
! Component: 350  -  total flux cleaned = 0.000372306 Jy
! Component: 400  -  total flux cleaned = 0.000348025 Jy
! Component: 450  -  total flux cleaned = 0.000288265 Jy
! Component: 500  -  total flux cleaned = 0.000217719 Jy
! Component: 550  -  total flux cleaned = 0.000148018 Jy
! Component: 600  -  total flux cleaned = 0.00011346 Jy
! Component: 650  -  total flux cleaned = 5.67243e-05 Jy
! Component: 700  -  total flux cleaned = 3.43833e-05 Jy
! Component: 750  -  total flux cleaned = 2.33317e-05 Jy
! Component: 800  -  total flux cleaned = 1.24587e-05 Jy
! Component: 850  -  total flux cleaned = 2.3362e-05 Jy
! Component: 900  -  total flux cleaned = 2.33299e-05 Jy
! Component: 950  -  total flux cleaned = 2.31672e-05 Jy
! Component: 1000  -  total flux cleaned = 3.35892e-05 Jy
! Component: 1050  -  total flux cleaned = 2.31706e-05 Jy
! Component: 1100  -  total flux cleaned = 2.30797e-05 Jy
! Component: 1150  -  total flux cleaned = 4.34939e-05 Jy
! Component: 1200  -  total flux cleaned = 3.32611e-05 Jy
! Component: 1250  -  total flux cleaned = 4.34036e-05 Jy
! Component: 1300  -  total flux cleaned = 5.34237e-05 Jy
! Component: 1350  -  total flux cleaned = 7.31553e-05 Jy
! Component: 1400  -  total flux cleaned = 6.33644e-05 Jy
! Component: 1450  -  total flux cleaned = 8.27027e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000101892 Jy
! Component: 1550  -  total flux cleaned = 0.000101943 Jy
! Component: 1600  -  total flux cleaned = 0.000111407 Jy
! Component: 1650  -  total flux cleaned = 8.334e-05 Jy
! Component: 1700  -  total flux cleaned = 9.26186e-05 Jy
! Component: 1750  -  total flux cleaned = 6.49875e-05 Jy
! Component: 1800  -  total flux cleaned = 8.33317e-05 Jy
! Component: 1850  -  total flux cleaned = 0.000110531 Jy
! Component: 1900  -  total flux cleaned = 7.43225e-05 Jy
! Component: 1950  -  total flux cleaned = 5.64393e-05 Jy
! Component: 2000  -  total flux cleaned = 0.000101025 Jy
! Component: 2050  -  total flux cleaned = 7.43681e-05 Jy
! Component: 2100  -  total flux cleaned = 6.55437e-05 Jy
! Component: 2150  -  total flux cleaned = 6.55984e-05 Jy
! Component: 2200  -  total flux cleaned = 5.69588e-05 Jy
! Component: 2250  -  total flux cleaned = 4.83794e-05 Jy
! Component: 2300  -  total flux cleaned = 6.55083e-05 Jy
! Component: 2350  -  total flux cleaned = 3.16017e-05 Jy
! Component: 2400  -  total flux cleaned = 2.32015e-05 Jy
! Component: 2450  -  total flux cleaned = 3.99407e-05 Jy
! Component: 2500  -  total flux cleaned = 2.32304e-05 Jy
! Component: 2550  -  total flux cleaned = 1.50314e-05 Jy
! Component: 2600  -  total flux cleaned = -1.51954e-06 Jy
! Component: 2650  -  total flux cleaned = -1.78862e-05 Jy
! Component: 2700  -  total flux cleaned = -9.70737e-06 Jy
! Component: 2750  -  total flux cleaned = -7.43792e-05 Jy
! Component: 2800  -  total flux cleaned = -8.24473e-05 Jy
! Component: 2850  -  total flux cleaned = -0.000130305 Jy
! Component: 2900  -  total flux cleaned = -0.00013825 Jy
! Component: 2950  -  total flux cleaned = -0.000193513 Jy
! Component: 3000  -  total flux cleaned = -0.000177818 Jy
! Component: 3050  -  total flux cleaned = -0.000216898 Jy
! Component: 3100  -  total flux cleaned = -0.000255748 Jy
! Component: 3150  -  total flux cleaned = -0.000240268 Jy
! Component: 3200  -  total flux cleaned = -0.000286326 Jy
! Component: 3250  -  total flux cleaned = -0.000278673 Jy
! Component: 3300  -  total flux cleaned = -0.000293926 Jy
! Component: 3350  -  total flux cleaned = -0.000331719 Jy
! Component: 3400  -  total flux cleaned = -0.000339293 Jy
! Component: 3450  -  total flux cleaned = -0.00039173 Jy
! Component: 3500  -  total flux cleaned = -0.000399235 Jy
! Component: 3550  -  total flux cleaned = -0.000421429 Jy
! Component: 3600  -  total flux cleaned = -0.00046569 Jy
! Component: 3650  -  total flux cleaned = -0.000502418 Jy
! Component: 3700  -  total flux cleaned = -0.000517035 Jy
! Component: 3750  -  total flux cleaned = -0.000531598 Jy
! Component: 3800  -  total flux cleaned = -0.000531556 Jy
! Component: 3850  -  total flux cleaned = -0.000581911 Jy
! Component: 3900  -  total flux cleaned = -0.000567564 Jy
! Component: 3950  -  total flux cleaned = -0.000603237 Jy
! Component: 4000  -  total flux cleaned = -0.000631598 Jy
! Component: 4050  -  total flux cleaned = -0.000631577 Jy
! Total flux subtracted in 4096 components = -0.0006597 Jy
! Clean residual min=-0.000480 max=0.000389 Jy/beam
! Clean residual mean=-0.000002 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.105421 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 442 components and 0.105421 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1448+5326_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 1.28 at -22.07 degrees (North through East)
! Clean map  min=-0.00091075  max=0.057668 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1448+5326_X_b_map.fits
wmodel /image_prod/ug002_uva//J1448+5326_X_b_map.mod
! Writing 442 model components to file: /image_prod/ug002_uva//J1448+5326_X_b_map.mod
wobs   /image_prod/ug002_uva//J1448+5326_X_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1448+5326_X_b_uvs.fits
wwins  /image_prod/ug002_uva//J1448+5326_X_b_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1448+5326_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0576677 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120281 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.62573 0.62573 1.25146 2.50292 5.00584 10.0117 20.0234 40.0467 80.0935
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  479.439 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1448+5326_X_b_dfm.log closed on Thu Mar  5 01:56:07 2020