! Started logfile: /image_prod/ug002_uva//J1443-2215_S_dfm.log on Thu Mar  5 01:53:05 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1443-2215_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1443-2215_S_uva.fits
! AN table 1: 37 integrations on 6 of 6 possible baselines.
! AN table 2: 37 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.995495 visibilities/baseline/integration-bin.
! Found source: J1443-2215
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1326 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1443-2215_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003271Jy  sigma=7.271280
! Fit after  self-cal, rms=0.938481Jy  sigma=6.820543
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.688 mas, bmaj=10.77 mas, bpa=21.5 degrees
! Estimated noise=3.6747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.051603 Jy
! Component: 100  -  total flux cleaned = 0.0626226 Jy
! Total flux subtracted in 100 components = 0.0626226 Jy
! Clean residual min=-0.006408 max=0.006408 Jy/beam
! Clean residual mean=0.000000 rms=0.002157 Jy/beam
! Combined flux in latest and established models = 0.0626226 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0626226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068717Jy  sigma=0.463936
! Fit after  self-cal, rms=0.067626Jy  sigma=0.457717
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.031 mas, bmaj=11.96 mas, bpa=19.54 degrees
! Estimated noise=2.73734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259037 Jy
! Component: 100  -  total flux cleaned = 0.00428619 Jy
! Component: 150  -  total flux cleaned = 0.00586235 Jy
! Component: 200  -  total flux cleaned = 0.00674216 Jy
! Total flux subtracted in 200 components = 0.00674216 Jy
! Clean residual min=-0.002270 max=0.002285 Jy/beam
! Clean residual mean=-0.000001 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.0693647 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 70 components and 0.0693647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066310Jy  sigma=0.449604
! Fit after  self-cal, rms=0.065831Jy  sigma=0.448608
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.031 x 11.96 at 19.54 degrees (North through East)
! Clean map  min=-0.0058025  max=0.059219 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.05     LA        1.15     OV        0.81     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.09     LA        0.99     OV        0.93     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.05     LA        1.23     OV        0.96     SC        0.74     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     LA        1.06     OV        1.05     SC        0.82     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.02     LA        0.92     OV        0.97     SC        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     LA        0.98     OV        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065831Jy  sigma=0.448608
! Fit after  self-cal, rms=0.063498Jy  sigma=0.444871
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.962 mas, bmaj=11.98 mas, bpa=19.62 degrees
! Estimated noise=2.66599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187312 Jy
! Component: 100  -  total flux cleaned = -0.000316506 Jy
! Component: 150  -  total flux cleaned = -0.000319911 Jy
! Component: 200  -  total flux cleaned = -0.000189577 Jy
! Total flux subtracted in 200 components = -0.000189577 Jy
! Clean residual min=-0.001013 max=0.001016 Jy/beam
! Clean residual mean=-0.000000 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.0691751 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 119 components and 0.0691751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063261Jy  sigma=0.443634
! Fit after  self-cal, rms=0.063505Jy  sigma=0.442318
! Inverting map 
! Added new window around map position (-125, -86.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000833303 Jy
! Component: 100  -  total flux cleaned = 0.000947776 Jy
! Component: 150  -  total flux cleaned = 0.00107445 Jy
! Component: 200  -  total flux cleaned = 0.00113786 Jy
! Total flux subtracted in 200 components = 0.00113786 Jy
! Clean residual min=-0.002062 max=0.001553 Jy/beam
! Clean residual mean=0.000000 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.070313 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 143 components and 0.070313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063439Jy  sigma=0.442000
! Fit after  self-cal, rms=0.063449Jy  sigma=0.441869
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063449Jy  sigma=0.441869
! Fit after  self-cal, rms=0.064302Jy  sigma=0.441244
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.944 mas, bmaj=12.04 mas, bpa=19.78 degrees
! Estimated noise=2.65187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427816 Jy
! Component: 100  -  total flux cleaned = 0.000369421 Jy
! Component: 150  -  total flux cleaned = 0.000252228 Jy
! Component: 200  -  total flux cleaned = 0.000212555 Jy
! Total flux subtracted in 200 components = 0.000212555 Jy
! Clean residual min=-0.001509 max=0.001382 Jy/beam
! Clean residual mean=-0.000000 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0705256 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 0.0705256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064260Jy  sigma=0.441049
! Fit after  self-cal, rms=0.064576Jy  sigma=0.440712
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311691 Jy
! Component: 100  -  total flux cleaned = 0.000239453 Jy
! Component: 150  -  total flux cleaned = 0.000276678 Jy
! Component: 200  -  total flux cleaned = 0.000306741 Jy
! Total flux subtracted in 200 components = 0.000306741 Jy
! Clean residual min=-0.001883 max=0.001466 Jy/beam
! Clean residual mean=-0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0708323 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 180 components and 0.0708323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064550Jy  sigma=0.440608
! Fit after  self-cal, rms=0.064567Jy  sigma=0.440556
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064567Jy  sigma=0.440556
! Fit after  self-cal, rms=0.065538Jy  sigma=0.440328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.938 mas, bmaj=12.08 mas, bpa=19.86 degrees
! Estimated noise=2.64443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.15933e-05 Jy
! Component: 100  -  total flux cleaned = -0.000117736 Jy
! Component: 150  -  total flux cleaned = -0.000175512 Jy
! Component: 200  -  total flux cleaned = -0.000204922 Jy
! Total flux subtracted in 200 components = -0.000204922 Jy
! Clean residual min=-0.001852 max=0.001545 Jy/beam
! Clean residual mean=0.000000 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0706274 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 190 components and 0.0706274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065513Jy  sigma=0.440210
! Fit after  self-cal, rms=0.065713Jy  sigma=0.440099
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.85973e-05 Jy
! Component: 100  -  total flux cleaned = -7.01911e-06 Jy
! Component: 150  -  total flux cleaned = 1.77346e-05 Jy
! Component: 200  -  total flux cleaned = 5.40423e-05 Jy
! Total flux subtracted in 200 components = 5.40423e-05 Jy
! Clean residual min=-0.001879 max=0.001557 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0706814 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 201 components and 0.0706815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065699Jy  sigma=0.440059
! Fit after  self-cal, rms=0.065710Jy  sigma=0.440037
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065710Jy  sigma=0.440037
! Fit after  self-cal, rms=0.066446Jy  sigma=0.439928
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.622 mas, bmaj=16.86 mas, bpa=18.24 degrees
! Estimated noise=3.46845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000420549 Jy
! Component: 100  -  total flux cleaned = -0.000384114 Jy
! Component: 150  -  total flux cleaned = -0.000385177 Jy
! Component: 200  -  total flux cleaned = -0.000406181 Jy
! Total flux subtracted in 200 components = -0.000406181 Jy
! Clean residual min=-0.001487 max=0.001434 Jy/beam
! Clean residual mean=0.000001 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.0702753 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 225 components and 0.0702753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066439Jy  sigma=0.439925
! Fit after  self-cal, rms=0.066594Jy  sigma=0.439871
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.90548e-05 Jy
! Component: 100  -  total flux cleaned = -1.37213e-05 Jy
! Component: 150  -  total flux cleaned = 1.80767e-05 Jy
! Component: 200  -  total flux cleaned = 3.40491e-05 Jy
! Total flux subtracted in 200 components = 3.40491e-05 Jy
! Clean residual min=-0.001505 max=0.001469 Jy/beam
! Clean residual mean=0.000000 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.0703093 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 240 components and 0.0703093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066588Jy  sigma=0.439865
! Fit after  self-cal, rms=0.066611Jy  sigma=0.439849
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.935 mas, bmaj=12.1 mas, bpa=19.93 degrees
! Estimated noise=2.63708 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.935 x 12.1 at 19.93 degrees (North through East)
! Clean map  min=-0.00313  max=0.057049 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.63 mas, bmaj=10.86 mas, bpa=21.63 degrees
! Estimated noise=3.53877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.018463 Jy
! Component: 100  -  total flux cleaned = -0.0224887 Jy
! Component: 150  -  total flux cleaned = -0.0236324 Jy
! Component: 200  -  total flux cleaned = -0.0218411 Jy
! Total flux subtracted in 200 components = -0.0218411 Jy
! Clean residual min=-0.027640 max=0.045610 Jy/beam
! Clean residual mean=-0.000004 rms=0.008160 Jy/beam
! Combined flux in latest and established models = -0.0218411 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and -0.0218411 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.935 mas, bmaj=12.1 mas, bpa=19.93 degrees
! Estimated noise=2.63708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344412 Jy
! Component: 100  -  total flux cleaned = 0.0410203 Jy
! Component: 150  -  total flux cleaned = 0.0443856 Jy
! Component: 200  -  total flux cleaned = 0.0446489 Jy
! Total flux subtracted in 200 components = 0.0446489 Jy
! Clean residual min=-0.007790 max=0.007452 Jy/beam
! Clean residual mean=0.000008 rms=0.002184 Jy/beam
! Combined flux in latest and established models = 0.0228079 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.0228079 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.622 mas, bmaj=16.86 mas, bpa=18.24 degrees
! Estimated noise=3.46845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00508849 Jy
! Component: 100  -  total flux cleaned = 0.00658785 Jy
! Component: 150  -  total flux cleaned = 0.0078432 Jy
! Component: 200  -  total flux cleaned = 0.00895029 Jy
! Total flux subtracted in 200 components = 0.00895029 Jy
! Clean residual min=-0.004690 max=0.004286 Jy/beam
! Clean residual mean=0.000015 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.0317582 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001059 Jy
! Component: 100  -  total flux cleaned = 0.00193771 Jy
! Component: 150  -  total flux cleaned = 0.00240997 Jy
! Component: 200  -  total flux cleaned = 0.00297473 Jy
! Total flux subtracted in 200 components = 0.00297473 Jy
! Clean residual min=-0.004846 max=0.003277 Jy/beam
! Clean residual mean=0.000016 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.0347329 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 72 components and 0.0347329 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.935 mas, bmaj=12.1 mas, bpa=19.93 degrees
! Estimated noise=2.63708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183113 Jy
! Component: 100  -  total flux cleaned = 0.00266472 Jy
! Component: 150  -  total flux cleaned = 0.0033483 Jy
! Component: 200  -  total flux cleaned = 0.00394631 Jy
! Total flux subtracted in 200 components = 0.00394631 Jy
! Clean residual min=-0.004614 max=0.004754 Jy/beam
! Clean residual mean=0.000004 rms=0.001277 Jy/beam
! Combined flux in latest and established models = 0.0386792 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 88 components and 0.0386792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067673Jy  sigma=0.447216
! Fit after  self-cal, rms=0.067157Jy  sigma=0.442710
wmodel J1443-2215_S_map.mod
! Writing 88 model components to file: J1443-2215_S_map.mod
wobs   J1443-2215_S_uvs.fits
! Writing UV FITS file: J1443-2215_S_uvs.fits
wwins  J1443-2215_S_map.win
! wwins: Wrote 2 windows to J1443-2215_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000318921 Jy
! Component: 100  -  total flux cleaned = -0.000628024 Jy
! Component: 150  -  total flux cleaned = -0.00122492 Jy
! Component: 200  -  total flux cleaned = -0.00160123 Jy
! Component: 250  -  total flux cleaned = -0.00190429 Jy
! Component: 300  -  total flux cleaned = -0.00228848 Jy
! Component: 350  -  total flux cleaned = -0.00258341 Jy
! Component: 400  -  total flux cleaned = -0.00289089 Jy
! Component: 450  -  total flux cleaned = -0.0033292 Jy
! Component: 500  -  total flux cleaned = -0.00374967 Jy
! Component: 550  -  total flux cleaned = -0.00412784 Jy
! Component: 600  -  total flux cleaned = -0.00449208 Jy
! Component: 650  -  total flux cleaned = -0.00476817 Jy
! Component: 700  -  total flux cleaned = -0.00498618 Jy
! Component: 750  -  total flux cleaned = -0.00517452 Jy
! Component: 800  -  total flux cleaned = -0.00533529 Jy
! Component: 850  -  total flux cleaned = -0.00551404 Jy
! Component: 900  -  total flux cleaned = -0.00544873 Jy
! Component: 950  -  total flux cleaned = -0.00531853 Jy
! Component: 1000  -  total flux cleaned = -0.00521102 Jy
! Component: 1050  -  total flux cleaned = -0.00512591 Jy
! Component: 1100  -  total flux cleaned = -0.00506261 Jy
! Component: 1150  -  total flux cleaned = -0.00502057 Jy
! Component: 1200  -  total flux cleaned = -0.00502072 Jy
! Component: 1250  -  total flux cleaned = -0.00502071 Jy
! Component: 1300  -  total flux cleaned = -0.00508288 Jy
! Component: 1350  -  total flux cleaned = -0.00512438 Jy
! Component: 1400  -  total flux cleaned = -0.00516618 Jy
! Component: 1450  -  total flux cleaned = -0.00522861 Jy
! Component: 1500  -  total flux cleaned = -0.0052911 Jy
! Component: 1550  -  total flux cleaned = -0.00535389 Jy
! Component: 1600  -  total flux cleaned = -0.00541696 Jy
! Component: 1650  -  total flux cleaned = -0.00550124 Jy
! Component: 1700  -  total flux cleaned = -0.00554372 Jy
! Component: 1750  -  total flux cleaned = -0.00560729 Jy
! Component: 1800  -  total flux cleaned = -0.00573526 Jy
! Component: 1850  -  total flux cleaned = -0.00579963 Jy
! Component: 1900  -  total flux cleaned = -0.00584289 Jy
! Component: 1950  -  total flux cleaned = -0.00592965 Jy
! Component: 2000  -  total flux cleaned = -0.00599496 Jy
! Component: 2050  -  total flux cleaned = -0.00608311 Jy
! Component: 2100  -  total flux cleaned = -0.00612758 Jy
! Component: 2150  -  total flux cleaned = -0.00617275 Jy
! Component: 2200  -  total flux cleaned = -0.0062183 Jy
! Component: 2250  -  total flux cleaned = -0.00628757 Jy
! Component: 2300  -  total flux cleaned = -0.00628782 Jy
! Component: 2350  -  total flux cleaned = -0.00633518 Jy
! Component: 2400  -  total flux cleaned = -0.00635896 Jy
! Component: 2450  -  total flux cleaned = -0.00640739 Jy
! Component: 2500  -  total flux cleaned = -0.00640718 Jy
! Component: 2550  -  total flux cleaned = -0.0064575 Jy
! Component: 2600  -  total flux cleaned = -0.00645778 Jy
! Component: 2650  -  total flux cleaned = -0.00648338 Jy
! Component: 2700  -  total flux cleaned = -0.00648339 Jy
! Component: 2750  -  total flux cleaned = -0.0065097 Jy
! Component: 2800  -  total flux cleaned = -0.00656382 Jy
! Component: 2850  -  total flux cleaned = -0.00645481 Jy
! Component: 2900  -  total flux cleaned = -0.00639916 Jy
! Component: 2950  -  total flux cleaned = -0.0062865 Jy
! Component: 3000  -  total flux cleaned = -0.00620042 Jy
! Component: 3050  -  total flux cleaned = -0.00611292 Jy
! Component: 3100  -  total flux cleaned = -0.00602362 Jy
! Component: 3150  -  total flux cleaned = -0.00602399 Jy
! Component: 3200  -  total flux cleaned = -0.00590152 Jy
! Component: 3250  -  total flux cleaned = -0.00583901 Jy
! Component: 3300  -  total flux cleaned = -0.00574334 Jy
! Component: 3350  -  total flux cleaned = -0.00571086 Jy
! Component: 3400  -  total flux cleaned = -0.0056451 Jy
! Component: 3450  -  total flux cleaned = -0.00554461 Jy
! Component: 3500  -  total flux cleaned = -0.0055445 Jy
! Component: 3550  -  total flux cleaned = -0.00540584 Jy
! Component: 3600  -  total flux cleaned = -0.00526482 Jy
! Component: 3650  -  total flux cleaned = -0.00515685 Jy
! Component: 3700  -  total flux cleaned = -0.00497371 Jy
! Component: 3750  -  total flux cleaned = -0.00486165 Jy
! Component: 3800  -  total flux cleaned = -0.00474788 Jy
! Component: 3850  -  total flux cleaned = -0.00463191 Jy
! Component: 3900  -  total flux cleaned = -0.0044346 Jy
! Component: 3950  -  total flux cleaned = -0.0042734 Jy
! Component: 4000  -  total flux cleaned = -0.00415104 Jy
! Component: 4050  -  total flux cleaned = -0.00394348 Jy
! Total flux subtracted in 4096 components = -0.00377442 Jy
! Clean residual min=-0.002741 max=0.002541 Jy/beam
! Clean residual mean=-0.000000 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.0349048 Jy
keep
! Adding 163 model components to the UV plane model.
! The established model now contains 251 components and 0.0349048 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1443-2215_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.935 x 12.1 at 19.93 degrees (North through East)
! Clean map  min=-0.013248  max=0.042826 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1443-2215_S_map.fits
wmodel /image_prod/ug002_uva//J1443-2215_S_map.mod
! Writing 251 model components to file: /image_prod/ug002_uva//J1443-2215_S_map.mod
wobs   /image_prod/ug002_uva//J1443-2215_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1443-2215_S_uvs.fits
wwins  /image_prod/ug002_uva//J1443-2215_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1443-2215_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0428255 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000785556 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.50295 5.50295 11.0059 22.0118 44.0236 88.0472
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.042 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  54.516 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1443-2215_S_dfm.log closed on Thu Mar  5 01:53:09 2020