! Started logfile: /image_prod/ug002_uva//J1442+0625_S_dfm.log on Thu Mar  5 01:52:25 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1442+0625_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1442+0625_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.842593 visibilities/baseline/integration-bin.
! Found source: J1442+0625
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6825 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1442+0625_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006330Jy  sigma=8.082176
! Fit after  self-cal, rms=0.911765Jy  sigma=7.356355
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.892 mas, bmaj=13.57 mas, bpa=-19.28 degrees
! Estimated noise=1.28397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0661554 Jy
! Component: 100  -  total flux cleaned = 0.0809231 Jy
! Total flux subtracted in 100 components = 0.0809231 Jy
! Clean residual min=-0.003489 max=0.005193 Jy/beam
! Clean residual mean=0.000009 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.0809231 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0809231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073542Jy  sigma=0.471685
! Fit after  self-cal, rms=0.073422Jy  sigma=0.470698
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.446 mas, bmaj=13.22 mas, bpa=-18.82 degrees
! Estimated noise=1.12056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00735792 Jy
! Component: 100  -  total flux cleaned = 0.0114427 Jy
! Component: 150  -  total flux cleaned = 0.0143631 Jy
! Component: 200  -  total flux cleaned = 0.0165243 Jy
! Total flux subtracted in 200 components = 0.0165243 Jy
! Clean residual min=-0.003896 max=0.005533 Jy/beam
! Clean residual mean=0.000007 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.0974475 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 39 components and 0.0974475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072183Jy  sigma=0.465569
! Fit after  self-cal, rms=0.072180Jy  sigma=0.465449
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.446 x 13.22 at -18.82 degrees (North through East)
! Clean map  min=-0.0038889  max=0.087345 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.06     KP        1.04     
!   LA        1.04     MK        1.02     NL        1.00     OV        1.04     
!   PT        0.50     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.02     HN        1.02     KP        1.02     
!   LA        1.09     MK        1.04     NL        1.06     OV        0.90     
!   PT        0.53     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.95     KP        1.02     
!   LA        1.09     MK        0.99     NL        1.06     OV        1.02     
!   PT        0.50     
! 
! 
! Fit before self-cal, rms=0.072180Jy  sigma=0.465449
! Fit after  self-cal, rms=0.062495Jy  sigma=0.450289
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.491 mas, bmaj=13.14 mas, bpa=-18.73 degrees
! Estimated noise=1.10746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107888 Jy
! Component: 100  -  total flux cleaned = -0.00127987 Jy
! Component: 150  -  total flux cleaned = -0.00139623 Jy
! Component: 200  -  total flux cleaned = -0.00139627 Jy
! Total flux subtracted in 200 components = -0.00139627 Jy
! Clean residual min=-0.002810 max=0.002852 Jy/beam
! Clean residual mean=0.000007 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.0960512 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 61 components and 0.0960512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062470Jy  sigma=0.450075
! Fit after  self-cal, rms=0.062416Jy  sigma=0.449721
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062416Jy  sigma=0.449721
! Fit after  self-cal, rms=0.063366Jy  sigma=0.446266
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.496 mas, bmaj=13.19 mas, bpa=-18.67 degrees
! Estimated noise=1.11377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111644 Jy
! Component: 100  -  total flux cleaned = -0.000192329 Jy
! Component: 150  -  total flux cleaned = -0.000170661 Jy
! Component: 200  -  total flux cleaned = -0.000189852 Jy
! Total flux subtracted in 200 components = -0.000189852 Jy
! Clean residual min=-0.002247 max=0.002068 Jy/beam
! Clean residual mean=0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.0958614 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.0958613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063344Jy  sigma=0.446109
! Fit after  self-cal, rms=0.063385Jy  sigma=0.446051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.79119e-06 Jy
! Component: 100  -  total flux cleaned = 2.622e-05 Jy
! Component: 150  -  total flux cleaned = -1.82935e-06 Jy
! Component: 200  -  total flux cleaned = 1.05232e-05 Jy
! Total flux subtracted in 200 components = 1.05232e-05 Jy
! Clean residual min=-0.002260 max=0.002093 Jy/beam
! Clean residual mean=0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.0958719 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.0958719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063377Jy  sigma=0.446003
! Fit after  self-cal, rms=0.063379Jy  sigma=0.445999
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063379Jy  sigma=0.445999
! Fit after  self-cal, rms=0.063974Jy  sigma=0.445115
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=13.21 mas, bpa=-18.65 degrees
! Estimated noise=1.11335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.07631e-05 Jy
! Component: 100  -  total flux cleaned = 4.92859e-05 Jy
! Component: 150  -  total flux cleaned = 4.91663e-05 Jy
! Component: 200  -  total flux cleaned = 2.62431e-05 Jy
! Total flux subtracted in 200 components = 2.62431e-05 Jy
! Clean residual min=-0.001859 max=0.001942 Jy/beam
! Clean residual mean=0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0958981 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 0.0958981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063965Jy  sigma=0.445076
! Fit after  self-cal, rms=0.063996Jy  sigma=0.445044
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.65555e-05 Jy
! Component: 100  -  total flux cleaned = 3.70676e-05 Jy
! Component: 150  -  total flux cleaned = 1.86678e-05 Jy
! Component: 200  -  total flux cleaned = 1.883e-05 Jy
! Total flux subtracted in 200 components = 1.883e-05 Jy
! Clean residual min=-0.001868 max=0.001951 Jy/beam
! Clean residual mean=0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0959169 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 87 components and 0.095917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063992Jy  sigma=0.445029
! Fit after  self-cal, rms=0.063993Jy  sigma=0.445029
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063993Jy  sigma=0.445029
! Fit after  self-cal, rms=0.064092Jy  sigma=0.445018
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.485 mas, bmaj=13.39 mas, bpa=-14.13 degrees
! Estimated noise=1.32122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124449 Jy
! Component: 100  -  total flux cleaned = -0.000134515 Jy
! Component: 150  -  total flux cleaned = -0.000126107 Jy
! Component: 200  -  total flux cleaned = -0.000126485 Jy
! Total flux subtracted in 200 components = -0.000126485 Jy
! Clean residual min=-0.002309 max=0.002053 Jy/beam
! Clean residual mean=0.000003 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0957905 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 94 components and 0.0957905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064089Jy  sigma=0.445009
! Fit after  self-cal, rms=0.064094Jy  sigma=0.445008
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.74287e-07 Jy
! Component: 100  -  total flux cleaned = 6.68787e-06 Jy
! Component: 150  -  total flux cleaned = 6.62322e-06 Jy
! Component: 200  -  total flux cleaned = 1.28595e-05 Jy
! Total flux subtracted in 200 components = 1.28595e-05 Jy
! Clean residual min=-0.002300 max=0.002038 Jy/beam
! Clean residual mean=0.000003 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0958033 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 96 components and 0.0958033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064092Jy  sigma=0.445006
! Fit after  self-cal, rms=0.064093Jy  sigma=0.445006
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=13.22 mas, bpa=-18.63 degrees
! Estimated noise=1.11321 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.495 x 13.22 at -18.63 degrees (North through East)
! Clean map  min=-0.0017836  max=0.086043 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.927 mas, bmaj=13.51 mas, bpa=-19.16 degrees
! Estimated noise=1.30607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0673267 Jy
! Component: 100  -  total flux cleaned = 0.0821296 Jy
! Component: 150  -  total flux cleaned = 0.0870982 Jy
! Component: 200  -  total flux cleaned = 0.0898236 Jy
! Total flux subtracted in 200 components = 0.0898236 Jy
! Clean residual min=-0.002366 max=0.002178 Jy/beam
! Clean residual mean=0.000003 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.0898236 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0898236 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=13.22 mas, bpa=-18.63 degrees
! Estimated noise=1.11321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210854 Jy
! Component: 100  -  total flux cleaned = 0.00330823 Jy
! Component: 150  -  total flux cleaned = 0.00360067 Jy
! Component: 200  -  total flux cleaned = 0.00385778 Jy
! Total flux subtracted in 200 components = 0.00385778 Jy
! Clean residual min=-0.001928 max=0.002021 Jy/beam
! Clean residual mean=0.000002 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0936814 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.0936814 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.485 mas, bmaj=13.39 mas, bpa=-14.13 degrees
! Estimated noise=1.32122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000848491 Jy
! Component: 100  -  total flux cleaned = 0.00106158 Jy
! Component: 150  -  total flux cleaned = 0.00117261 Jy
! Component: 200  -  total flux cleaned = 0.00123971 Jy
! Total flux subtracted in 200 components = 0.00123971 Jy
! Clean residual min=-0.002329 max=0.002086 Jy/beam
! Clean residual mean=0.000003 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.0949211 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.66994e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133131 Jy
! Component: 150  -  total flux cleaned = 0.000185099 Jy
! Component: 200  -  total flux cleaned = 0.000197519 Jy
! Total flux subtracted in 200 components = 0.000197519 Jy
! Clean residual min=-0.002319 max=0.002068 Jy/beam
! Clean residual mean=0.000003 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0951186 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.0951186 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=13.22 mas, bpa=-18.63 degrees
! Estimated noise=1.11321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.91653e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105004 Jy
! Component: 150  -  total flux cleaned = -0.000105964 Jy
! Component: 200  -  total flux cleaned = -7.56767e-05 Jy
! Total flux subtracted in 200 components = -7.56767e-05 Jy
! Clean residual min=-0.001844 max=0.002034 Jy/beam
! Clean residual mean=0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.095043 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 0.095043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064107Jy  sigma=0.445058
! Fit after  self-cal, rms=0.064107Jy  sigma=0.445052
wmodel J1442+0625_S_map.mod
! Writing 66 model components to file: J1442+0625_S_map.mod
wobs   J1442+0625_S_uvs.fits
! Writing UV FITS file: J1442+0625_S_uvs.fits
wwins  J1442+0625_S_map.win
! wwins: Wrote 1 windows to J1442+0625_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000297522 Jy
! Component: 100  -  total flux cleaned = 0.000393347 Jy
! Component: 150  -  total flux cleaned = 0.000453934 Jy
! Component: 200  -  total flux cleaned = 0.000425594 Jy
! Component: 250  -  total flux cleaned = 0.000425667 Jy
! Component: 300  -  total flux cleaned = 0.00042494 Jy
! Component: 350  -  total flux cleaned = 0.000449559 Jy
! Component: 400  -  total flux cleaned = 0.000473971 Jy
! Component: 450  -  total flux cleaned = 0.000497792 Jy
! Component: 500  -  total flux cleaned = 0.000567178 Jy
! Component: 550  -  total flux cleaned = 0.000679301 Jy
! Component: 600  -  total flux cleaned = 0.000766288 Jy
! Component: 650  -  total flux cleaned = 0.000787848 Jy
! Component: 700  -  total flux cleaned = 0.000954642 Jy
! Component: 750  -  total flux cleaned = 0.000995209 Jy
! Component: 800  -  total flux cleaned = 0.0011353 Jy
! Component: 850  -  total flux cleaned = 0.00121411 Jy
! Component: 900  -  total flux cleaned = 0.00132965 Jy
! Component: 950  -  total flux cleaned = 0.00136749 Jy
! Component: 1000  -  total flux cleaned = 0.00144171 Jy
! Component: 1050  -  total flux cleaned = 0.00144146 Jy
! Component: 1100  -  total flux cleaned = 0.00145893 Jy
! Component: 1150  -  total flux cleaned = 0.00145889 Jy
! Component: 1200  -  total flux cleaned = 0.00144127 Jy
! Component: 1250  -  total flux cleaned = 0.00144135 Jy
! Component: 1300  -  total flux cleaned = 0.00152541 Jy
! Component: 1350  -  total flux cleaned = 0.0015255 Jy
! Component: 1400  -  total flux cleaned = 0.00162346 Jy
! Component: 1450  -  total flux cleaned = 0.00170365 Jy
! Component: 1500  -  total flux cleaned = 0.00171932 Jy
! Component: 1550  -  total flux cleaned = 0.00173528 Jy
! Component: 1600  -  total flux cleaned = 0.00188914 Jy
! Component: 1650  -  total flux cleaned = 0.00193469 Jy
! Component: 1700  -  total flux cleaned = 0.00200963 Jy
! Component: 1750  -  total flux cleaned = 0.00208365 Jy
! Component: 1800  -  total flux cleaned = 0.00212774 Jy
! Component: 1850  -  total flux cleaned = 0.00220015 Jy
! Component: 1900  -  total flux cleaned = 0.00227162 Jy
! Component: 1950  -  total flux cleaned = 0.00235614 Jy
! Component: 2000  -  total flux cleaned = 0.00236999 Jy
! Component: 2050  -  total flux cleaned = 0.00235626 Jy
! Component: 2100  -  total flux cleaned = 0.00238363 Jy
! Component: 2150  -  total flux cleaned = 0.00247785 Jy
! Component: 2200  -  total flux cleaned = 0.00243776 Jy
! Component: 2250  -  total flux cleaned = 0.00242462 Jy
! Component: 2300  -  total flux cleaned = 0.00241156 Jy
! Component: 2350  -  total flux cleaned = 0.00246331 Jy
! Component: 2400  -  total flux cleaned = 0.00243785 Jy
! Component: 2450  -  total flux cleaned = 0.00245047 Jy
! Component: 2500  -  total flux cleaned = 0.00238775 Jy
! Component: 2550  -  total flux cleaned = 0.00235032 Jy
! Component: 2600  -  total flux cleaned = 0.00235046 Jy
! Component: 2650  -  total flux cleaned = 0.00235028 Jy
! Component: 2700  -  total flux cleaned = 0.00228996 Jy
! Component: 2750  -  total flux cleaned = 0.00227816 Jy
! Component: 2800  -  total flux cleaned = 0.00232545 Jy
! Component: 2850  -  total flux cleaned = 0.00230193 Jy
! Component: 2900  -  total flux cleaned = 0.00226702 Jy
! Component: 2950  -  total flux cleaned = 0.00224392 Jy
! Component: 3000  -  total flux cleaned = 0.00224388 Jy
! Component: 3050  -  total flux cleaned = 0.00219855 Jy
! Component: 3100  -  total flux cleaned = 0.00217606 Jy
! Component: 3150  -  total flux cleaned = 0.00215382 Jy
! Component: 3200  -  total flux cleaned = 0.00216496 Jy
! Component: 3250  -  total flux cleaned = 0.00214307 Jy
! Component: 3300  -  total flux cleaned = 0.00206714 Jy
! Component: 3350  -  total flux cleaned = 0.00207793 Jy
! Component: 3400  -  total flux cleaned = 0.00201396 Jy
! Component: 3450  -  total flux cleaned = 0.00194002 Jy
! Component: 3500  -  total flux cleaned = 0.00191917 Jy
! Component: 3550  -  total flux cleaned = 0.00186723 Jy
! Component: 3600  -  total flux cleaned = 0.00182582 Jy
! Component: 3650  -  total flux cleaned = 0.00176424 Jy
! Component: 3700  -  total flux cleaned = 0.001693 Jy
! Component: 3750  -  total flux cleaned = 0.00162239 Jy
! Component: 3800  -  total flux cleaned = 0.00159243 Jy
! Component: 3850  -  total flux cleaned = 0.00154264 Jy
! Component: 3900  -  total flux cleaned = 0.0014537 Jy
! Component: 3950  -  total flux cleaned = 0.00140464 Jy
! Component: 4000  -  total flux cleaned = 0.00137544 Jy
! Component: 4050  -  total flux cleaned = 0.00130766 Jy
! Total flux subtracted in 4096 components = 0.00129798 Jy
! Clean residual min=-0.000506 max=0.000631 Jy/beam
! Clean residual mean=0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0963409 Jy
keep
! Adding 340 model components to the UV plane model.
! The established model now contains 406 components and 0.0963409 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1442+0625_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.495 x 13.22 at -18.63 degrees (North through East)
! Clean map  min=-0.0013311  max=0.086213 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1442+0625_S_map.fits
wmodel /image_prod/ug002_uva//J1442+0625_S_map.mod
! Writing 406 model components to file: /image_prod/ug002_uva//J1442+0625_S_map.mod
wobs   /image_prod/ug002_uva//J1442+0625_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1442+0625_S_uvs.fits
wwins  /image_prod/ug002_uva//J1442+0625_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1442+0625_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0862125 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000187352 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.651944 0.651944 1.30389 2.60778 5.21555 10.4311 20.8622 41.7244 83.4488
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  460.162 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1442+0625_S_dfm.log closed on Thu Mar  5 01:52:29 2020