! Started logfile: /image_prod/ug002_uva//J1436+6336_X_dfm.log on Thu Mar 5 01:48:39 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1436+6336_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1436+6336_X_uva.fits ! AN table 1: 100 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974667 visibilities/baseline/integration-bin. ! Found source: J1436+6336 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 3 lines of history. ! ! Reading 52632 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1436+6336_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.247585Jy sigma=8.064512 ! Fit after self-cal, rms=0.484266Jy sigma=3.421936 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7715 mas, bmaj=0.8793 mas, bpa=3.379 degrees ! Estimated noise=1.0264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.406667 Jy ! Component: 100 - total flux cleaned = 0.572895 Jy ! Total flux subtracted in 100 components = 0.572895 Jy ! Clean residual min=-0.035347 max=0.091529 Jy/beam ! Clean residual mean=-0.000051 rms=0.007375 Jy/beam ! Combined flux in latest and established models = 0.572895 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.572895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.294486Jy sigma=1.704181 ! Fit after self-cal, rms=0.292924Jy sigma=1.691679 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10749 Jy ! Component: 100 - total flux cleaned = 0.17667 Jy ! Total flux subtracted in 100 components = 0.17667 Jy ! Clean residual min=-0.025453 max=0.074654 Jy/beam ! Clean residual mean=-0.000032 rms=0.005427 Jy/beam ! Combined flux in latest and established models = 0.749565 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.749565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.214061Jy sigma=1.250309 ! Fit after self-cal, rms=0.210472Jy sigma=1.224317 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670891 Jy ! Component: 100 - total flux cleaned = 0.112176 Jy ! Total flux subtracted in 100 components = 0.112176 Jy ! Clean residual min=-0.019327 max=0.026142 Jy/beam ! Clean residual mean=-0.000020 rms=0.004270 Jy/beam ! Combined flux in latest and established models = 0.86174 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.86174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.172732Jy sigma=1.025695 ! Fit after self-cal, rms=0.172334Jy sigma=1.022947 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362799 Jy ! Component: 100 - total flux cleaned = 0.0635407 Jy ! Total flux subtracted in 100 components = 0.0635407 Jy ! Clean residual min=-0.017838 max=0.022694 Jy/beam ! Clean residual mean=-0.000013 rms=0.003892 Jy/beam ! Combined flux in latest and established models = 0.925281 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.925281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158082Jy sigma=0.962493 ! Fit after self-cal, rms=0.157928Jy sigma=0.961419 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.995 mas, bmaj=1.134 mas, bpa=2.488 degrees ! Estimated noise=0.474885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249067 Jy ! Component: 100 - total flux cleaned = 0.0406214 Jy ! Component: 150 - total flux cleaned = 0.0514399 Jy ! Component: 200 - total flux cleaned = 0.0547342 Jy ! Total flux subtracted in 200 components = 0.0547342 Jy ! Clean residual min=-0.020465 max=0.024406 Jy/beam ! Clean residual mean=0.000003 rms=0.005517 Jy/beam ! Combined flux in latest and established models = 0.980015 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.980015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150740Jy sigma=0.943560 ! Fit after self-cal, rms=0.150662Jy sigma=0.943080 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.995 x 1.134 at 2.488 degrees (North through East) ! Clean map min=-0.019718 max=0.54162 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.06 HN 0.88 KP 0.90 ! LA 0.87 MK 0.87 NL 0.80 OV 0.98 ! PT 1.08 SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 0.92 KP 0.92 ! LA 0.88 MK 0.88 NL 0.81 OV 0.98 ! PT 1.02 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.12 HN 0.95 KP 0.97 ! LA 0.92 MK 0.91 NL 0.84 OV 1.02 ! PT 1.04 SC 1.14 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 0.94 KP 0.98 ! LA 0.91 MK 0.91 NL 0.82 OV 1.00 ! PT 1.03 SC 1.15 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 HN 0.92 KP 0.97 ! LA 0.92 MK 0.94 NL 0.85 OV 1.02 ! PT 1.05 SC 1.14 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 0.93 KP 0.96 ! LA 0.92 MK 0.92 NL 0.86 OV 1.05 ! PT 1.03 SC 1.15 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.11 HN 0.99 KP 0.97 ! LA 0.92 MK 0.94 NL 0.85 OV 1.08 ! PT 1.06 SC 1.16 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.16 HN 1.04 KP 0.94 ! LA 0.92 MK 0.95 NL 0.87 OV 1.08 ! PT 1.09 SC 1.18 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.13 HN 1.04 KP 0.97 ! LA 0.93 MK 0.96 NL 0.87 OV 1.08 ! PT 1.11 SC 1.16 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.17 HN 1.03 KP 1.04 ! LA 0.96 MK 1.00 NL 0.90 OV 1.09 ! PT 1.11 SC 1.19 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.18 HN 1.03 KP 1.03 ! LA 0.95 MK 1.03 NL 0.91 OV 1.08 ! PT 1.13 SC 1.21 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.17 HN 1.01 KP 1.02 ! LA 0.94 MK 1.05 NL 0.90 OV 1.09 ! PT 1.14 SC 1.22 ! ! ! Fit before self-cal, rms=0.150662Jy sigma=0.943080 ! Fit after self-cal, rms=0.125981Jy sigma=0.754946 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=1.141 mas, bpa=-2.053 degrees ! Estimated noise=0.472993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154663 Jy ! Component: 100 - total flux cleaned = 0.0195155 Jy ! Component: 150 - total flux cleaned = 0.0204381 Jy ! Component: 200 - total flux cleaned = 0.021378 Jy ! Total flux subtracted in 200 components = 0.021378 Jy ! Clean residual min=-0.017066 max=0.019034 Jy/beam ! Clean residual mean=0.000024 rms=0.004501 Jy/beam ! Combined flux in latest and established models = 1.00139 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 1.00139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123192Jy sigma=0.744713 ! Fit after self-cal, rms=0.123184Jy sigma=0.744386 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123184Jy sigma=0.744386 ! Fit after self-cal, rms=0.071340Jy sigma=0.412009 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9979 mas, bmaj=1.152 mas, bpa=1.633 degrees ! Estimated noise=0.478333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703365 Jy ! Component: 100 - total flux cleaned = -0.00150476 Jy ! Component: 150 - total flux cleaned = -0.00219609 Jy ! Component: 200 - total flux cleaned = -0.0026806 Jy ! Total flux subtracted in 200 components = -0.0026806 Jy ! Clean residual min=-0.003931 max=0.009892 Jy/beam ! Clean residual mean=-0.000006 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.998713 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.998713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070763Jy sigma=0.407034 ! Fit after self-cal, rms=0.070827Jy sigma=0.406635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00989682 Jy ! Component: 100 - total flux cleaned = 0.0151446 Jy ! Component: 150 - total flux cleaned = 0.0176833 Jy ! Component: 200 - total flux cleaned = 0.0188244 Jy ! Total flux subtracted in 200 components = 0.0188244 Jy ! Clean residual min=-0.003511 max=0.005123 Jy/beam ! Clean residual mean=-0.000010 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 1.01754 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 76 components and 1.01754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069310Jy sigma=0.396486 ! Fit after self-cal, rms=0.069194Jy sigma=0.395854 ! Inverting map ! Added new window around map position (-4.6, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491376 Jy ! Component: 100 - total flux cleaned = 0.00670472 Jy ! Component: 150 - total flux cleaned = 0.00812375 Jy ! Component: 200 - total flux cleaned = 0.00901675 Jy ! Total flux subtracted in 200 components = 0.00901675 Jy ! Clean residual min=-0.003300 max=0.004006 Jy/beam ! Clean residual mean=-0.000012 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 1.02655 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 1.02655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068661Jy sigma=0.392574 ! Fit after self-cal, rms=0.068639Jy sigma=0.392420 ! Inverting map ! Added new window around map position (-2.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388695 Jy ! Component: 100 - total flux cleaned = 0.0053474 Jy ! Component: 150 - total flux cleaned = 0.00608868 Jy ! Component: 200 - total flux cleaned = 0.00651596 Jy ! Total flux subtracted in 200 components = 0.00651596 Jy ! Clean residual min=-0.003213 max=0.002977 Jy/beam ! Clean residual mean=-0.000011 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 1.03307 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 1.03307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068294Jy sigma=0.390165 ! Fit after self-cal, rms=0.068279Jy sigma=0.390062 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068279Jy sigma=0.390062 ! Fit after self-cal, rms=0.067984Jy sigma=0.387715 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9948 mas, bmaj=1.152 mas, bpa=1.939 degrees ! Estimated noise=0.478559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340074 Jy ! Component: 100 - total flux cleaned = 0.00112937 Jy ! Component: 150 - total flux cleaned = 0.00183699 Jy ! Component: 200 - total flux cleaned = 0.00256993 Jy ! Total flux subtracted in 200 components = 0.00256993 Jy ! Clean residual min=-0.003067 max=0.002649 Jy/beam ! Clean residual mean=-0.000006 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 1.03564 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 1.03564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067667Jy sigma=0.385348 ! Fit after self-cal, rms=0.067659Jy sigma=0.385311 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078322 Jy ! Component: 100 - total flux cleaned = 0.00134644 Jy ! Component: 150 - total flux cleaned = 0.00187626 Jy ! Component: 200 - total flux cleaned = 0.00230673 Jy ! Total flux subtracted in 200 components = 0.00230673 Jy ! Clean residual min=-0.002783 max=0.002402 Jy/beam ! Clean residual mean=-0.000006 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 1.03795 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 1.03795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067506Jy sigma=0.384130 ! Fit after self-cal, rms=0.067502Jy sigma=0.384112 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067502Jy sigma=0.384112 ! Fit after self-cal, rms=0.067588Jy sigma=0.383743 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.242 mas, bmaj=2.332 mas, bpa=48.18 degrees ! Estimated noise=0.676619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245219 Jy ! Component: 100 - total flux cleaned = 0.00361594 Jy ! Component: 150 - total flux cleaned = 0.00425614 Jy ! Component: 200 - total flux cleaned = 0.00476486 Jy ! Total flux subtracted in 200 components = 0.00476486 Jy ! Clean residual min=-0.002421 max=0.002623 Jy/beam ! Clean residual mean=-0.000014 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 1.04271 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 145 components and 1.04271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067515Jy sigma=0.383322 ! Fit after self-cal, rms=0.067504Jy sigma=0.383262 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.4, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253083 Jy ! Component: 100 - total flux cleaned = 0.00396312 Jy ! Component: 150 - total flux cleaned = 0.00508017 Jy ! Component: 200 - total flux cleaned = 0.00575047 Jy ! Total flux subtracted in 200 components = 0.00575047 Jy ! Clean residual min=-0.002452 max=0.001992 Jy/beam ! Clean residual mean=-0.000015 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 1.04846 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 184 components and 1.04846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067432Jy sigma=0.382933 ! Fit after self-cal, rms=0.067428Jy sigma=0.382899 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9936 mas, bmaj=1.152 mas, bpa=2.195 degrees ! Estimated noise=0.478948 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9936 x 1.152 at 2.195 degrees (North through East) ! Clean map min=-0.0019536 max=0.54275 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067428Jy sigma=0.382899 ! Fit after self-cal, rms=0.062423Jy sigma=0.353062 ! Inverting map and beam ! Estimated beam: bmin=0.9942 mas, bmaj=1.153 mas, bpa=2.107 degrees ! Estimated noise=0.47913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363131 Jy ! Component: 100 - total flux cleaned = 0.000178357 Jy ! Component: 150 - total flux cleaned = 0.000526092 Jy ! Component: 200 - total flux cleaned = 0.00084813 Jy ! Total flux subtracted in 200 components = 0.00084813 Jy ! Clean residual min=-0.002134 max=0.002200 Jy/beam ! Clean residual mean=-0.000004 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 1.04931 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 193 components and 1.04931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062271Jy sigma=0.351784 ! Fit after self-cal, rms=0.062267Jy sigma=0.351766 ! Inverting map ! Added new window around map position (-3, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.93122e-05 Jy ! Component: 100 - total flux cleaned = 9.12321e-05 Jy ! Component: 150 - total flux cleaned = 9.40636e-05 Jy ! Component: 200 - total flux cleaned = 0.000320903 Jy ! Total flux subtracted in 200 components = 0.000320903 Jy ! Clean residual min=-0.001916 max=0.001935 Jy/beam ! Clean residual mean=-0.000004 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 1.04963 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 209 components and 1.04963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062143Jy sigma=0.350714 ! Fit after self-cal, rms=0.062141Jy sigma=0.350695 ! Inverting map ! Added new window around map position (4.4, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468503 Jy ! Component: 100 - total flux cleaned = 0.000642775 Jy ! Component: 150 - total flux cleaned = 0.00091038 Jy ! Component: 200 - total flux cleaned = 0.000909259 Jy ! Total flux subtracted in 200 components = 0.000909259 Jy ! Clean residual min=-0.001813 max=0.001731 Jy/beam ! Clean residual mean=-0.000004 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 1.05054 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 219 components and 1.05054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062037Jy sigma=0.349925 ! Fit after self-cal, rms=0.062032Jy sigma=0.349908 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062032Jy sigma=0.349908 ! Fit after self-cal, rms=0.062088Jy sigma=0.349750 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7709 mas, bmaj=0.8969 mas, bpa=2.614 degrees ! Estimated noise=1.04066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.412913 Jy ! Component: 100 - total flux cleaned = 0.592723 Jy ! Component: 150 - total flux cleaned = 0.699781 Jy ! Component: 200 - total flux cleaned = 0.772793 Jy ! Total flux subtracted in 200 components = 0.772793 Jy ! Clean residual min=-0.014588 max=0.040673 Jy/beam ! Clean residual mean=-0.000022 rms=0.003175 Jy/beam ! Combined flux in latest and established models = 0.772793 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.772793 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9932 mas, bmaj=1.152 mas, bpa=2.181 degrees ! Estimated noise=0.47924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0770143 Jy ! Component: 100 - total flux cleaned = 0.124497 Jy ! Component: 150 - total flux cleaned = 0.15534 Jy ! Component: 200 - total flux cleaned = 0.17602 Jy ! Total flux subtracted in 200 components = 0.17602 Jy ! Clean residual min=-0.004653 max=0.011582 Jy/beam ! Clean residual mean=-0.000008 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.948813 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 0.948813 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152993 Jy ! Component: 100 - total flux cleaned = 0.0272116 Jy ! Component: 150 - total flux cleaned = 0.0367634 Jy ! Component: 200 - total flux cleaned = 0.0446794 Jy ! Total flux subtracted in 200 components = 0.0446794 Jy ! Clean residual min=-0.002920 max=0.004892 Jy/beam ! Clean residual mean=-0.000004 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.993492 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 57 components and 0.993492 Jy ! Inverting map ! Added new window around map position (-4.8, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666395 Jy ! Component: 100 - total flux cleaned = 0.012353 Jy ! Component: 150 - total flux cleaned = 0.0173127 Jy ! Component: 200 - total flux cleaned = 0.0216866 Jy ! Total flux subtracted in 200 components = 0.0216866 Jy ! Clean residual min=-0.002440 max=0.002971 Jy/beam ! Clean residual mean=-0.000003 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 1.01518 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 79 components and 1.01518 Jy ! Inverting map ! Added new window around map position (-4.6, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039147 Jy ! Component: 100 - total flux cleaned = 0.00739399 Jy ! Component: 150 - total flux cleaned = 0.0105096 Jy ! Component: 200 - total flux cleaned = 0.0133156 Jy ! Total flux subtracted in 200 components = 0.0133156 Jy ! Clean residual min=-0.002113 max=0.002150 Jy/beam ! Clean residual mean=-0.000003 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 1.02849 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 95 components and 1.02849 Jy ! Inverting map ! Added new window around map position (2.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260915 Jy ! Component: 100 - total flux cleaned = 0.00494198 Jy ! Component: 150 - total flux cleaned = 0.00706979 Jy ! Component: 200 - total flux cleaned = 0.00886438 Jy ! Total flux subtracted in 200 components = 0.00886438 Jy ! Clean residual min=-0.002024 max=0.001978 Jy/beam ! Clean residual mean=-0.000003 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 1.03736 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 113 components and 1.03736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.242 mas, bmaj=2.335 mas, bpa=48.44 degrees ! Estimated noise=0.676899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290783 Jy ! Component: 100 - total flux cleaned = 0.00474293 Jy ! Component: 150 - total flux cleaned = 0.00624676 Jy ! Component: 200 - total flux cleaned = 0.00757135 Jy ! Total flux subtracted in 200 components = 0.00757135 Jy ! Clean residual min=-0.002074 max=0.001697 Jy/beam ! Clean residual mean=-0.000008 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 1.04493 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945489 Jy ! Component: 100 - total flux cleaned = 0.00146107 Jy ! Component: 150 - total flux cleaned = 0.00197263 Jy ! Component: 200 - total flux cleaned = 0.00240235 Jy ! Total flux subtracted in 200 components = 0.00240235 Jy ! Clean residual min=-0.001927 max=0.001701 Jy/beam ! Clean residual mean=-0.000008 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 1.04733 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 221 components and 1.04733 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9932 mas, bmaj=1.152 mas, bpa=2.181 degrees ! Estimated noise=0.47924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766124 Jy ! Component: 100 - total flux cleaned = 0.00105187 Jy ! Component: 150 - total flux cleaned = 0.00147741 Jy ! Component: 200 - total flux cleaned = 0.00187708 Jy ! Total flux subtracted in 200 components = 0.00187708 Jy ! Clean residual min=-0.001478 max=0.001751 Jy/beam ! Clean residual mean=-0.000003 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 1.04921 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 242 components and 1.04921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061845Jy sigma=0.348090 ! Fit after self-cal, rms=0.061822Jy sigma=0.347888 wmodel J1436+6336_X_map.mod ! Writing 242 model components to file: J1436+6336_X_map.mod wobs J1436+6336_X_uvs.fits ! Writing UV FITS file: J1436+6336_X_uvs.fits wwins J1436+6336_X_map.win ! wwins: Wrote 12 windows to J1436+6336_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209828 Jy ! Component: 100 - total flux cleaned = 0.000182748 Jy ! Component: 150 - total flux cleaned = 0.000107111 Jy ! Component: 200 - total flux cleaned = 5.9076e-05 Jy ! Component: 250 - total flux cleaned = -3.57954e-05 Jy ! Component: 300 - total flux cleaned = -8.25796e-05 Jy ! Component: 350 - total flux cleaned = -0.00015056 Jy ! Component: 400 - total flux cleaned = -0.000173006 Jy ! Component: 450 - total flux cleaned = -0.000238227 Jy ! Component: 500 - total flux cleaned = -0.000153119 Jy ! Component: 550 - total flux cleaned = -0.0001748 Jy ! Component: 600 - total flux cleaned = -0.000133572 Jy ! Component: 650 - total flux cleaned = -5.22604e-05 Jy ! Component: 700 - total flux cleaned = 6.80204e-05 Jy ! Component: 750 - total flux cleaned = 6.82939e-05 Jy ! Component: 800 - total flux cleaned = 0.000224057 Jy ! Component: 850 - total flux cleaned = 0.000223962 Jy ! Component: 900 - total flux cleaned = 0.000319207 Jy ! Component: 950 - total flux cleaned = 0.000431594 Jy ! Component: 1000 - total flux cleaned = 0.000431229 Jy ! Component: 1050 - total flux cleaned = 0.000486711 Jy ! Component: 1100 - total flux cleaned = 0.00059559 Jy ! Component: 1150 - total flux cleaned = 0.000667173 Jy ! Component: 1200 - total flux cleaned = 0.000719983 Jy ! Component: 1250 - total flux cleaned = 0.000737735 Jy ! Component: 1300 - total flux cleaned = 0.000859248 Jy ! Component: 1350 - total flux cleaned = 0.000979438 Jy ! Component: 1400 - total flux cleaned = 0.00106403 Jy ! Component: 1450 - total flux cleaned = 0.00116487 Jy ! Component: 1500 - total flux cleaned = 0.00123168 Jy ! Component: 1550 - total flux cleaned = 0.00136376 Jy ! Component: 1600 - total flux cleaned = 0.00147808 Jy ! Component: 1650 - total flux cleaned = 0.0015429 Jy ! Component: 1700 - total flux cleaned = 0.00160743 Jy ! Component: 1750 - total flux cleaned = 0.00170291 Jy ! Component: 1800 - total flux cleaned = 0.0018294 Jy ! Component: 1850 - total flux cleaned = 0.00190771 Jy ! Component: 1900 - total flux cleaned = 0.00195407 Jy ! Component: 1950 - total flux cleaned = 0.0020467 Jy ! Component: 2000 - total flux cleaned = 0.0021385 Jy ! Component: 2050 - total flux cleaned = 0.00221436 Jy ! Component: 2100 - total flux cleaned = 0.00224464 Jy ! Component: 2150 - total flux cleaned = 0.00231914 Jy ! Component: 2200 - total flux cleaned = 0.00243772 Jy ! Component: 2250 - total flux cleaned = 0.00245242 Jy ! Component: 2300 - total flux cleaned = 0.00251087 Jy ! Component: 2350 - total flux cleaned = 0.00258332 Jy ! Component: 2400 - total flux cleaned = 0.00262651 Jy ! Component: 2450 - total flux cleaned = 0.00271221 Jy ! Component: 2500 - total flux cleaned = 0.00276893 Jy ! Component: 2550 - total flux cleaned = 0.00272658 Jy ! Component: 2600 - total flux cleaned = 0.00282473 Jy ! Component: 2650 - total flux cleaned = 0.00286649 Jy ! Component: 2700 - total flux cleaned = 0.00290787 Jy ! Component: 2750 - total flux cleaned = 0.00296278 Jy ! Component: 2800 - total flux cleaned = 0.00296276 Jy ! Component: 2850 - total flux cleaned = 0.00297637 Jy ! Component: 2900 - total flux cleaned = 0.00305721 Jy ! Component: 2950 - total flux cleaned = 0.00309747 Jy ! Component: 3000 - total flux cleaned = 0.00320372 Jy ! Component: 3050 - total flux cleaned = 0.00316423 Jy ! Component: 3100 - total flux cleaned = 0.00324317 Jy ! Component: 3150 - total flux cleaned = 0.00330855 Jy ! Component: 3200 - total flux cleaned = 0.00337337 Jy ! Component: 3250 - total flux cleaned = 0.0034378 Jy ! Component: 3300 - total flux cleaned = 0.00347623 Jy ! Component: 3350 - total flux cleaned = 0.00357798 Jy ! Component: 3400 - total flux cleaned = 0.00361588 Jy ! Component: 3450 - total flux cleaned = 0.00360328 Jy ! Component: 3500 - total flux cleaned = 0.00370349 Jy ! Component: 3550 - total flux cleaned = 0.00377807 Jy ! Component: 3600 - total flux cleaned = 0.00383986 Jy ! Component: 3650 - total flux cleaned = 0.00390142 Jy ! Component: 3700 - total flux cleaned = 0.00395031 Jy ! Component: 3750 - total flux cleaned = 0.00405976 Jy ! Component: 3800 - total flux cleaned = 0.00413227 Jy ! Component: 3850 - total flux cleaned = 0.00415644 Jy ! Component: 3900 - total flux cleaned = 0.00422831 Jy ! Component: 3950 - total flux cleaned = 0.00428782 Jy ! Component: 4000 - total flux cleaned = 0.00438237 Jy ! Component: 4050 - total flux cleaned = 0.00439412 Jy ! Total flux subtracted in 4096 components = 0.00444087 Jy ! Clean residual min=-0.000601 max=0.000665 Jy/beam ! Clean residual mean=-0.000002 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 1.05365 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 547 components and 1.05365 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1436+6336_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9932 x 1.152 at 2.181 degrees (North through East) ! Clean map min=-0.0012169 max=0.5451 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1436+6336_X_map.fits wmodel /image_prod/ug002_uva//J1436+6336_X_map.mod ! Writing 547 model components to file: /image_prod/ug002_uva//J1436+6336_X_map.mod wobs /image_prod/ug002_uva//J1436+6336_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1436+6336_X_uvs.fits wwins /image_prod/ug002_uva//J1436+6336_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J1436+6336_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.545102 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.10737 0.10737 0.21474 0.42948 0.858961 1.71792 3.43584 6.87168 13.7434 27.4867 54.9735 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.545 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2794.07 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1436+6336_X_dfm.log closed on Thu Mar 5 01:48:47 2020