! Started logfile: /image_prod/ug002_uva//J1428+2724_S_dfm.log on Thu Mar 5 01:45:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1428+2724_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1428+2724_S_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J1428+2724 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4833 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1428+2724_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.007791Jy sigma=9.090042 ! Fit after self-cal, rms=0.927274Jy sigma=8.417693 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.749 mas, bpa=-20.69 degrees ! Estimated noise=1.50019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579621 Jy ! Component: 100 - total flux cleaned = 0.0706025 Jy ! Total flux subtracted in 100 components = 0.0706025 Jy ! Clean residual min=-0.003172 max=0.003539 Jy/beam ! Clean residual mean=0.000006 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.0706025 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0706025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063006Jy sigma=0.458478 ! Fit after self-cal, rms=0.062756Jy sigma=0.457161 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=9.574 mas, bpa=-20.18 degrees ! Estimated noise=1.16628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327111 Jy ! Component: 100 - total flux cleaned = 0.00365736 Jy ! Component: 150 - total flux cleaned = 0.0037095 Jy ! Component: 200 - total flux cleaned = 0.00382465 Jy ! Total flux subtracted in 200 components = 0.00382465 Jy ! Clean residual min=-0.003888 max=0.003004 Jy/beam ! Clean residual mean=0.000013 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0744272 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.0744272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062489Jy sigma=0.455710 ! Fit after self-cal, rms=0.062477Jy sigma=0.455653 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.84 x 9.574 at -20.18 degrees (North through East) ! Clean map min=-0.0038446 max=0.074 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.95 KP 0.96 ! LA 1.03 MK 0.96 NL 0.98 OV 1.01 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.96 HN 1.00 KP 0.99 ! LA 1.04 MK 1.05 NL 0.78 OV 1.14 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 1.02 KP 0.97 ! LA 1.02 MK 1.01 NL 0.96 OV 1.10 ! PT 0.98 ! ! ! Fit before self-cal, rms=0.062477Jy sigma=0.455653 ! Fit after self-cal, rms=0.060524Jy sigma=0.452655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=9.578 mas, bpa=-20.3 degrees ! Estimated noise=1.16265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271002 Jy ! Component: 100 - total flux cleaned = 0.000327603 Jy ! Component: 150 - total flux cleaned = 0.000398812 Jy ! Component: 200 - total flux cleaned = 0.000438874 Jy ! Total flux subtracted in 200 components = 0.000438874 Jy ! Clean residual min=-0.003483 max=0.002643 Jy/beam ! Clean residual mean=0.000012 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.074866 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.074866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060498Jy sigma=0.452408 ! Fit after self-cal, rms=0.060499Jy sigma=0.452310 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060499Jy sigma=0.452310 ! Fit after self-cal, rms=0.059684Jy sigma=0.444008 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=9.595 mas, bpa=-20.19 degrees ! Estimated noise=1.16076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502322 Jy ! Component: 100 - total flux cleaned = -0.000595047 Jy ! Component: 150 - total flux cleaned = -0.000568725 Jy ! Component: 200 - total flux cleaned = -0.000546928 Jy ! Total flux subtracted in 200 components = -0.000546928 Jy ! Clean residual min=-0.001998 max=0.002137 Jy/beam ! Clean residual mean=0.000005 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0743191 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0743191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059671Jy sigma=0.443903 ! Fit after self-cal, rms=0.059711Jy sigma=0.443685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61401e-05 Jy ! Component: 100 - total flux cleaned = -2.51007e-05 Jy ! Component: 150 - total flux cleaned = -1.71186e-05 Jy ! Component: 200 - total flux cleaned = -1.76967e-05 Jy ! Total flux subtracted in 200 components = -1.76967e-05 Jy ! Clean residual min=-0.001960 max=0.002157 Jy/beam ! Clean residual mean=0.000005 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0743014 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.0743014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059708Jy sigma=0.443667 ! Fit after self-cal, rms=0.059709Jy sigma=0.443665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059709Jy sigma=0.443665 ! Fit after self-cal, rms=0.060037Jy sigma=0.443558 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=9.616 mas, bpa=-20.09 degrees ! Estimated noise=1.15884 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249227 Jy ! Component: 100 - total flux cleaned = -0.000284463 Jy ! Component: 150 - total flux cleaned = -0.000312264 Jy ! Component: 200 - total flux cleaned = -0.000320539 Jy ! Total flux subtracted in 200 components = -0.000320539 Jy ! Clean residual min=-0.001947 max=0.002138 Jy/beam ! Clean residual mean=0.000004 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0739809 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.0739809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060032Jy sigma=0.443530 ! Fit after self-cal, rms=0.060038Jy sigma=0.443525 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.44469e-06 Jy ! Component: 100 - total flux cleaned = -1.29444e-05 Jy ! Component: 150 - total flux cleaned = -1.28587e-05 Jy ! Component: 200 - total flux cleaned = -1.89988e-05 Jy ! Total flux subtracted in 200 components = -1.89988e-05 Jy ! Clean residual min=-0.001942 max=0.002134 Jy/beam ! Clean residual mean=0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0739619 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0739619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060036Jy sigma=0.443517 ! Fit after self-cal, rms=0.060037Jy sigma=0.443516 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060037Jy sigma=0.443516 ! Fit after self-cal, rms=0.060178Jy sigma=0.443503 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.066 mas, bmaj=11.45 mas, bpa=-14.3 degrees ! Estimated noise=1.33671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019692 Jy ! Component: 100 - total flux cleaned = -0.000216319 Jy ! Component: 150 - total flux cleaned = -0.000208214 Jy ! Component: 200 - total flux cleaned = -0.000194348 Jy ! Total flux subtracted in 200 components = -0.000194348 Jy ! Clean residual min=-0.002157 max=0.002229 Jy/beam ! Clean residual mean=0.000008 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0737675 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.0737675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060177Jy sigma=0.443501 ! Fit after self-cal, rms=0.060180Jy sigma=0.443498 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.85703e-07 Jy ! Component: 100 - total flux cleaned = 6.20417e-06 Jy ! Component: 150 - total flux cleaned = 1.72039e-05 Jy ! Component: 200 - total flux cleaned = 2.23051e-05 Jy ! Total flux subtracted in 200 components = 2.23051e-05 Jy ! Clean residual min=-0.002164 max=0.002239 Jy/beam ! Clean residual mean=0.000008 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0737898 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 75 components and 0.0737898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060180Jy sigma=0.443508 ! Fit after self-cal, rms=0.060181Jy sigma=0.443506 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=9.628 mas, bpa=-20.02 degrees ! Estimated noise=1.15774 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 9.628 at -20.02 degrees (North through East) ! Clean map min=-0.0018951 max=0.073279 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=8.765 mas, bpa=-20.59 degrees ! Estimated noise=1.48158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572801 Jy ! Component: 100 - total flux cleaned = 0.0698344 Jy ! Component: 150 - total flux cleaned = 0.0729304 Jy ! Component: 200 - total flux cleaned = 0.0740807 Jy ! Total flux subtracted in 200 components = 0.0740807 Jy ! Clean residual min=-0.002290 max=0.002308 Jy/beam ! Clean residual mean=0.000001 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0740807 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0740807 Jy ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=9.628 mas, bpa=-20.02 degrees ! Estimated noise=1.15774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038407 Jy ! Component: 100 - total flux cleaned = 0.000329515 Jy ! Component: 150 - total flux cleaned = 0.000308649 Jy ! Component: 200 - total flux cleaned = 0.000267019 Jy ! Total flux subtracted in 200 components = 0.000267019 Jy ! Clean residual min=-0.001925 max=0.002049 Jy/beam ! Clean residual mean=0.000004 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0743477 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.0743477 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.066 mas, bmaj=11.45 mas, bpa=-14.3 degrees ! Estimated noise=1.33671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362684 Jy ! Component: 100 - total flux cleaned = -0.000363193 Jy ! Component: 150 - total flux cleaned = -0.000362762 Jy ! Component: 200 - total flux cleaned = -0.000376282 Jy ! Total flux subtracted in 200 components = -0.000376282 Jy ! Clean residual min=-0.002140 max=0.002240 Jy/beam ! Clean residual mean=0.000008 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0739715 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.16163e-06 Jy ! Component: 100 - total flux cleaned = -2.30943e-05 Jy ! Component: 150 - total flux cleaned = -3.33329e-05 Jy ! Component: 200 - total flux cleaned = -3.80387e-05 Jy ! Total flux subtracted in 200 components = -3.80387e-05 Jy ! Clean residual min=-0.002151 max=0.002239 Jy/beam ! Clean residual mean=0.000008 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0739334 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.0739334 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=9.628 mas, bpa=-20.02 degrees ! Estimated noise=1.15774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.59534e-05 Jy ! Component: 100 - total flux cleaned = 0.000102517 Jy ! Component: 150 - total flux cleaned = 0.000133078 Jy ! Component: 200 - total flux cleaned = 0.000119619 Jy ! Total flux subtracted in 200 components = 0.000119619 Jy ! Clean residual min=-0.001931 max=0.002103 Jy/beam ! Clean residual mean=0.000004 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.074053 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0740531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060188Jy sigma=0.443547 ! Fit after self-cal, rms=0.060187Jy sigma=0.443533 wmodel J1428+2724_S_map.mod ! Writing 50 model components to file: J1428+2724_S_map.mod wobs J1428+2724_S_uvs.fits ! Writing UV FITS file: J1428+2724_S_uvs.fits wwins J1428+2724_S_map.win ! wwins: Wrote 1 windows to J1428+2724_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671992 Jy ! Component: 100 - total flux cleaned = 0.00119946 Jy ! Component: 150 - total flux cleaned = 0.00146635 Jy ! Component: 200 - total flux cleaned = 0.001784 Jy ! Component: 250 - total flux cleaned = 0.00196835 Jy ! Component: 300 - total flux cleaned = 0.00211672 Jy ! Component: 350 - total flux cleaned = 0.00223117 Jy ! Component: 400 - total flux cleaned = 0.00217539 Jy ! Component: 450 - total flux cleaned = 0.0022026 Jy ! Component: 500 - total flux cleaned = 0.00217619 Jy ! Component: 550 - total flux cleaned = 0.00215031 Jy ! Component: 600 - total flux cleaned = 0.00207416 Jy ! Component: 650 - total flux cleaned = 0.00202426 Jy ! Component: 700 - total flux cleaned = 0.00199937 Jy ! Component: 750 - total flux cleaned = 0.00195217 Jy ! Component: 800 - total flux cleaned = 0.00199923 Jy ! Component: 850 - total flux cleaned = 0.00202208 Jy ! Component: 900 - total flux cleaned = 0.00199903 Jy ! Component: 950 - total flux cleaned = 0.00199907 Jy ! Component: 1000 - total flux cleaned = 0.00202078 Jy ! Component: 1050 - total flux cleaned = 0.0020845 Jy ! Component: 1100 - total flux cleaned = 0.00204269 Jy ! Component: 1150 - total flux cleaned = 0.00216727 Jy ! Component: 1200 - total flux cleaned = 0.00224832 Jy ! Component: 1250 - total flux cleaned = 0.00224819 Jy ! Component: 1300 - total flux cleaned = 0.00220901 Jy ! Component: 1350 - total flux cleaned = 0.00228732 Jy ! Component: 1400 - total flux cleaned = 0.00224895 Jy ! Component: 1450 - total flux cleaned = 0.00232488 Jy ! Component: 1500 - total flux cleaned = 0.00230591 Jy ! Component: 1550 - total flux cleaned = 0.00230618 Jy ! Component: 1600 - total flux cleaned = 0.00232418 Jy ! Component: 1650 - total flux cleaned = 0.00228807 Jy ! Component: 1700 - total flux cleaned = 0.00232356 Jy ! Component: 1750 - total flux cleaned = 0.00230575 Jy ! Component: 1800 - total flux cleaned = 0.00227088 Jy ! Component: 1850 - total flux cleaned = 0.00232252 Jy ! Component: 1900 - total flux cleaned = 0.00235604 Jy ! Component: 1950 - total flux cleaned = 0.00238943 Jy ! Component: 2000 - total flux cleaned = 0.00235641 Jy ! Component: 2050 - total flux cleaned = 0.00242185 Jy ! Component: 2100 - total flux cleaned = 0.00242192 Jy ! Component: 2150 - total flux cleaned = 0.00238996 Jy ! Component: 2200 - total flux cleaned = 0.00246932 Jy ! Component: 2250 - total flux cleaned = 0.00246924 Jy ! Component: 2300 - total flux cleaned = 0.00250042 Jy ! Component: 2350 - total flux cleaned = 0.00246956 Jy ! Component: 2400 - total flux cleaned = 0.00256087 Jy ! Component: 2450 - total flux cleaned = 0.00253066 Jy ! Component: 2500 - total flux cleaned = 0.00253055 Jy ! Component: 2550 - total flux cleaned = 0.00250113 Jy ! Component: 2600 - total flux cleaned = 0.00254525 Jy ! Component: 2650 - total flux cleaned = 0.00257396 Jy ! Component: 2700 - total flux cleaned = 0.00258808 Jy ! Component: 2750 - total flux cleaned = 0.00255971 Jy ! Component: 2800 - total flux cleaned = 0.00257372 Jy ! Component: 2850 - total flux cleaned = 0.00257339 Jy ! Component: 2900 - total flux cleaned = 0.00255946 Jy ! Component: 2950 - total flux cleaned = 0.00249127 Jy ! Component: 3000 - total flux cleaned = 0.00253204 Jy ! Component: 3050 - total flux cleaned = 0.00251845 Jy ! Component: 3100 - total flux cleaned = 0.00251858 Jy ! Component: 3150 - total flux cleaned = 0.00249213 Jy ! Component: 3200 - total flux cleaned = 0.00251842 Jy ! Component: 3250 - total flux cleaned = 0.00254445 Jy ! Component: 3300 - total flux cleaned = 0.0025573 Jy ! Component: 3350 - total flux cleaned = 0.0025447 Jy ! Component: 3400 - total flux cleaned = 0.0025703 Jy ! Component: 3450 - total flux cleaned = 0.00257031 Jy ! Component: 3500 - total flux cleaned = 0.00257039 Jy ! Component: 3550 - total flux cleaned = 0.00260769 Jy ! Component: 3600 - total flux cleaned = 0.00260777 Jy ! Component: 3650 - total flux cleaned = 0.00263234 Jy ! Component: 3700 - total flux cleaned = 0.00264438 Jy ! Component: 3750 - total flux cleaned = 0.00263235 Jy ! Component: 3800 - total flux cleaned = 0.00265641 Jy ! Component: 3850 - total flux cleaned = 0.00269215 Jy ! Component: 3900 - total flux cleaned = 0.00270407 Jy ! Component: 3950 - total flux cleaned = 0.00272744 Jy ! Component: 4000 - total flux cleaned = 0.00271587 Jy ! Component: 4050 - total flux cleaned = 0.00273899 Jy ! Total flux subtracted in 4096 components = 0.002762 Jy ! Clean residual min=-0.000727 max=0.000573 Jy/beam ! Clean residual mean=0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.076815 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 386 components and 0.0768151 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1428+2724_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 9.628 at -20.02 degrees (North through East) ! Clean map min=-0.0013953 max=0.07356 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1428+2724_S_map.fits wmodel /image_prod/ug002_uva//J1428+2724_S_map.mod ! Writing 386 model components to file: /image_prod/ug002_uva//J1428+2724_S_map.mod wobs /image_prod/ug002_uva//J1428+2724_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1428+2724_S_uvs.fits wwins /image_prod/ug002_uva//J1428+2724_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1428+2724_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0735598 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226232 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.922644 0.922644 1.84529 3.69058 7.38115 14.7623 29.5246 59.0492 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.073 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 325.152 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1428+2724_S_dfm.log closed on Thu Mar 5 01:45:39 2020