! Started logfile: /image_prod/ug002_uva//J1424-1407_S_dfm.log on Thu Mar  5 01:44:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1424-1407_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1424-1407_S_uva.fits
! AN table 1: 50 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.976429 visibilities/baseline/integration-bin.
! Found source: J1424-1407
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4101 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1424-1407_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023967Jy  sigma=7.154502
! Fit after  self-cal, rms=0.842952Jy  sigma=5.891673
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.836 mas, bmaj=14.26 mas, bpa=-18.55 degrees
! Estimated noise=2.02693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123032 Jy
! Component: 100  -  total flux cleaned = 0.150686 Jy
! Total flux subtracted in 100 components = 0.150686 Jy
! Clean residual min=-0.011111 max=0.013785 Jy/beam
! Clean residual mean=0.000005 rms=0.003063 Jy/beam
! Combined flux in latest and established models = 0.150686 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.150686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088522Jy  sigma=0.512481
! Fit after  self-cal, rms=0.088506Jy  sigma=0.512450
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=14.38 mas, bpa=-17.35 degrees
! Estimated noise=1.66606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136739 Jy
! Component: 100  -  total flux cleaned = 0.0190704 Jy
! Component: 150  -  total flux cleaned = 0.0200686 Jy
! Component: 200  -  total flux cleaned = 0.0202787 Jy
! Total flux subtracted in 200 components = 0.0202787 Jy
! Clean residual min=-0.009836 max=0.012475 Jy/beam
! Clean residual mean=0.000006 rms=0.002571 Jy/beam
! Combined flux in latest and established models = 0.170965 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.170965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085870Jy  sigma=0.492794
! Fit after  self-cal, rms=0.085841Jy  sigma=0.492589
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.307 x 14.38 at -17.35 degrees (North through East)
! Clean map  min=-0.0095567  max=0.15769 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.86     HN        0.99     KP        0.98     
!   LA        1.08     MK        1.07     NL        1.24     OV        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.85     HN        1.01     KP        1.01     
!   LA        1.04     MK        1.01     NL        1.13     OV        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.86     HN        1.00     KP        0.99     
!   LA        1.05     MK        1.04     NL        1.11     OV        1.05     
! 
! 
! Fit before self-cal, rms=0.085841Jy  sigma=0.492589
! Fit after  self-cal, rms=0.082244Jy  sigma=0.471363
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=14.08 mas, bpa=-17.06 degrees
! Estimated noise=1.65354 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-34.5, 21.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00974528 Jy
! Component: 100  -  total flux cleaned = 0.0121072 Jy
! Component: 150  -  total flux cleaned = 0.012121 Jy
! Component: 200  -  total flux cleaned = 0.0122317 Jy
! Total flux subtracted in 200 components = 0.0122317 Jy
! Clean residual min=-0.005093 max=0.006538 Jy/beam
! Clean residual mean=0.000016 rms=0.001466 Jy/beam
! Combined flux in latest and established models = 0.183197 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 51 components and 0.183197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080965Jy  sigma=0.461242
! Fit after  self-cal, rms=0.081080Jy  sigma=0.460467
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081080Jy  sigma=0.460467
! Fit after  self-cal, rms=0.080910Jy  sigma=0.449939
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=14.04 mas, bpa=-17.38 degrees
! Estimated noise=1.64155 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291209 Jy
! Component: 100  -  total flux cleaned = 0.00327681 Jy
! Component: 150  -  total flux cleaned = 0.00361296 Jy
! Component: 200  -  total flux cleaned = 0.00371311 Jy
! Total flux subtracted in 200 components = 0.00371311 Jy
! Clean residual min=-0.003046 max=0.002657 Jy/beam
! Clean residual mean=0.000005 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.18691 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 84 components and 0.18691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080736Jy  sigma=0.448716
! Fit after  self-cal, rms=0.080770Jy  sigma=0.448478
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000551931 Jy
! Component: 100  -  total flux cleaned = 0.000719708 Jy
! Component: 150  -  total flux cleaned = 0.000720452 Jy
! Component: 200  -  total flux cleaned = 0.000818452 Jy
! Total flux subtracted in 200 components = 0.000818452 Jy
! Clean residual min=-0.002833 max=0.002563 Jy/beam
! Clean residual mean=0.000004 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.187728 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 108 components and 0.187728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080724Jy  sigma=0.448211
! Fit after  self-cal, rms=0.080725Jy  sigma=0.448186
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080725Jy  sigma=0.448186
! Fit after  self-cal, rms=0.081052Jy  sigma=0.448006
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.362 mas, bmaj=14.04 mas, bpa=-17.39 degrees
! Estimated noise=1.64333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000807946 Jy
! Component: 100  -  total flux cleaned = 0.00115364 Jy
! Component: 150  -  total flux cleaned = 0.00148789 Jy
! Component: 200  -  total flux cleaned = 0.00157959 Jy
! Total flux subtracted in 200 components = 0.00157959 Jy
! Clean residual min=-0.002482 max=0.002416 Jy/beam
! Clean residual mean=0.000003 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.189308 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 130 components and 0.189308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081017Jy  sigma=0.447754
! Fit after  self-cal, rms=0.081024Jy  sigma=0.447734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204736 Jy
! Component: 100  -  total flux cleaned = 0.000206971 Jy
! Component: 150  -  total flux cleaned = 0.00020633 Jy
! Component: 200  -  total flux cleaned = 0.000206224 Jy
! Total flux subtracted in 200 components = 0.000206224 Jy
! Clean residual min=-0.002387 max=0.002332 Jy/beam
! Clean residual mean=0.000002 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.189514 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 150 components and 0.189514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081005Jy  sigma=0.447609
! Fit after  self-cal, rms=0.081005Jy  sigma=0.447602
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081005Jy  sigma=0.447602
! Fit after  self-cal, rms=0.081264Jy  sigma=0.447563
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.469 mas, bmaj=16.97 mas, bpa=-6.639 degrees
! Estimated noise=1.98945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107021 Jy
! Component: 100  -  total flux cleaned = 0.0012551 Jy
! Component: 150  -  total flux cleaned = 0.00127696 Jy
! Component: 200  -  total flux cleaned = 0.00123701 Jy
! Total flux subtracted in 200 components = 0.00123701 Jy
! Clean residual min=-0.002652 max=0.002413 Jy/beam
! Clean residual mean=0.000003 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.190751 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 174 components and 0.190751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081259Jy  sigma=0.447484
! Fit after  self-cal, rms=0.081265Jy  sigma=0.447476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181421 Jy
! Component: 100  -  total flux cleaned = 0.000199441 Jy
! Component: 150  -  total flux cleaned = 0.000183569 Jy
! Component: 200  -  total flux cleaned = 0.000168726 Jy
! Total flux subtracted in 200 components = 0.000168726 Jy
! Clean residual min=-0.002543 max=0.002374 Jy/beam
! Clean residual mean=0.000002 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.19092 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 190 components and 0.19092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081263Jy  sigma=0.447462
! Fit after  self-cal, rms=0.081263Jy  sigma=0.447460
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=14.03 mas, bpa=-17.41 degrees
! Estimated noise=1.64503 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 14.03 at -17.41 degrees (North through East)
! Clean map  min=-0.002206  max=0.15614 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.866 mas, bmaj=13.99 mas, bpa=-18.63 degrees
! Estimated noise=2.0135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122095 Jy
! Component: 100  -  total flux cleaned = 0.149841 Jy
! Component: 150  -  total flux cleaned = 0.162057 Jy
! Component: 200  -  total flux cleaned = 0.169463 Jy
! Total flux subtracted in 200 components = 0.169463 Jy
! Clean residual min=-0.003933 max=0.005159 Jy/beam
! Clean residual mean=0.000005 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.169463 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.169463 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=14.03 mas, bpa=-17.41 degrees
! Estimated noise=1.64503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00663635 Jy
! Component: 100  -  total flux cleaned = 0.0109234 Jy
! Component: 150  -  total flux cleaned = 0.0139772 Jy
! Component: 200  -  total flux cleaned = 0.0157856 Jy
! Total flux subtracted in 200 components = 0.0157856 Jy
! Clean residual min=-0.002656 max=0.002744 Jy/beam
! Clean residual mean=0.000002 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.185248 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 46 components and 0.185248 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.469 mas, bmaj=16.97 mas, bpa=-6.639 degrees
! Estimated noise=1.98945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175856 Jy
! Component: 100  -  total flux cleaned = 0.00293494 Jy
! Component: 150  -  total flux cleaned = 0.00358041 Jy
! Component: 200  -  total flux cleaned = 0.00393072 Jy
! Total flux subtracted in 200 components = 0.00393072 Jy
! Clean residual min=-0.002865 max=0.002753 Jy/beam
! Clean residual mean=0.000002 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.189179 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127861 Jy
! Component: 100  -  total flux cleaned = 0.00012742 Jy
! Component: 150  -  total flux cleaned = 0.000126797 Jy
! Component: 200  -  total flux cleaned = 0.000159773 Jy
! Total flux subtracted in 200 components = 0.000159773 Jy
! Clean residual min=-0.002702 max=0.002742 Jy/beam
! Clean residual mean=0.000002 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.189339 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 108 components and 0.189339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=14.03 mas, bpa=-17.41 degrees
! Estimated noise=1.64503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112038 Jy
! Component: 100  -  total flux cleaned = -0.000219736 Jy
! Component: 150  -  total flux cleaned = -0.000413746 Jy
! Component: 200  -  total flux cleaned = -0.000412972 Jy
! Total flux subtracted in 200 components = -0.000412972 Jy
! Clean residual min=-0.002232 max=0.002251 Jy/beam
! Clean residual mean=0.000001 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.188926 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.188926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081281Jy  sigma=0.447625
! Fit after  self-cal, rms=0.081280Jy  sigma=0.447559
wmodel J1424-1407_S_map.mod
! Writing 135 model components to file: J1424-1407_S_map.mod
wobs   J1424-1407_S_uvs.fits
! Writing UV FITS file: J1424-1407_S_uvs.fits
wwins  J1424-1407_S_map.win
! wwins: Wrote 3 windows to J1424-1407_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267366 Jy
! Component: 100  -  total flux cleaned = 0.000115584 Jy
! Component: 150  -  total flux cleaned = 0.000114618 Jy
! Component: 200  -  total flux cleaned = 0.000216831 Jy
! Component: 250  -  total flux cleaned = 0.000315097 Jy
! Component: 300  -  total flux cleaned = 0.000316124 Jy
! Component: 350  -  total flux cleaned = 0.000345999 Jy
! Component: 400  -  total flux cleaned = 0.000403013 Jy
! Component: 450  -  total flux cleaned = 0.000512186 Jy
! Component: 500  -  total flux cleaned = 0.000511707 Jy
! Component: 550  -  total flux cleaned = 0.000694251 Jy
! Component: 600  -  total flux cleaned = 0.000896346 Jy
! Component: 650  -  total flux cleaned = 0.00106825 Jy
! Component: 700  -  total flux cleaned = 0.00106822 Jy
! Component: 750  -  total flux cleaned = 0.00109131 Jy
! Component: 800  -  total flux cleaned = 0.00109098 Jy
! Component: 850  -  total flux cleaned = 0.00111361 Jy
! Component: 900  -  total flux cleaned = 0.00115731 Jy
! Component: 950  -  total flux cleaned = 0.00117854 Jy
! Component: 1000  -  total flux cleaned = 0.00122082 Jy
! Component: 1050  -  total flux cleaned = 0.00124162 Jy
! Component: 1100  -  total flux cleaned = 0.00122143 Jy
! Component: 1150  -  total flux cleaned = 0.00132075 Jy
! Component: 1200  -  total flux cleaned = 0.00128133 Jy
! Component: 1250  -  total flux cleaned = 0.00130062 Jy
! Component: 1300  -  total flux cleaned = 0.00131972 Jy
! Component: 1350  -  total flux cleaned = 0.0013947 Jy
! Component: 1400  -  total flux cleaned = 0.00132091 Jy
! Component: 1450  -  total flux cleaned = 0.0014119 Jy
! Component: 1500  -  total flux cleaned = 0.00141201 Jy
! Component: 1550  -  total flux cleaned = 0.00144744 Jy
! Component: 1600  -  total flux cleaned = 0.0014995 Jy
! Component: 1650  -  total flux cleaned = 0.00144815 Jy
! Component: 1700  -  total flux cleaned = 0.00146526 Jy
! Component: 1750  -  total flux cleaned = 0.00143137 Jy
! Component: 1800  -  total flux cleaned = 0.00139808 Jy
! Component: 1850  -  total flux cleaned = 0.00141462 Jy
! Component: 1900  -  total flux cleaned = 0.00143069 Jy
! Component: 1950  -  total flux cleaned = 0.00138258 Jy
! Component: 2000  -  total flux cleaned = 0.0013985 Jy
! Component: 2050  -  total flux cleaned = 0.00141401 Jy
! Component: 2100  -  total flux cleaned = 0.00142952 Jy
! Component: 2150  -  total flux cleaned = 0.00138374 Jy
! Component: 2200  -  total flux cleaned = 0.0013837 Jy
! Component: 2250  -  total flux cleaned = 0.0014287 Jy
! Component: 2300  -  total flux cleaned = 0.00142857 Jy
! Component: 2350  -  total flux cleaned = 0.00142848 Jy
! Component: 2400  -  total flux cleaned = 0.00141388 Jy
! Component: 2450  -  total flux cleaned = 0.00141393 Jy
! Component: 2500  -  total flux cleaned = 0.00141395 Jy
! Component: 2550  -  total flux cleaned = 0.00138562 Jy
! Component: 2600  -  total flux cleaned = 0.0013577 Jy
! Component: 2650  -  total flux cleaned = 0.00137166 Jy
! Component: 2700  -  total flux cleaned = 0.00134406 Jy
! Component: 2750  -  total flux cleaned = 0.00131675 Jy
! Component: 2800  -  total flux cleaned = 0.00128959 Jy
! Component: 2850  -  total flux cleaned = 0.00124937 Jy
! Component: 2900  -  total flux cleaned = 0.00124936 Jy
! Component: 2950  -  total flux cleaned = 0.00122284 Jy
! Component: 3000  -  total flux cleaned = 0.00118344 Jy
! Component: 3050  -  total flux cleaned = 0.00120957 Jy
! Component: 3100  -  total flux cleaned = 0.0011836 Jy
! Component: 3150  -  total flux cleaned = 0.00114498 Jy
! Component: 3200  -  total flux cleaned = 0.00115772 Jy
! Component: 3250  -  total flux cleaned = 0.001107 Jy
! Component: 3300  -  total flux cleaned = 0.00110698 Jy
! Component: 3350  -  total flux cleaned = 0.001057 Jy
! Component: 3400  -  total flux cleaned = 0.000995087 Jy
! Component: 3450  -  total flux cleaned = 0.0010075 Jy
! Component: 3500  -  total flux cleaned = 0.000970715 Jy
! Component: 3550  -  total flux cleaned = 0.000934191 Jy
! Component: 3600  -  total flux cleaned = 0.000910086 Jy
! Component: 3650  -  total flux cleaned = 0.000886027 Jy
! Component: 3700  -  total flux cleaned = 0.000862187 Jy
! Component: 3750  -  total flux cleaned = 0.000838582 Jy
! Component: 3800  -  total flux cleaned = 0.000838581 Jy
! Component: 3850  -  total flux cleaned = 0.000838557 Jy
! Component: 3900  -  total flux cleaned = 0.000815096 Jy
! Component: 3950  -  total flux cleaned = 0.000768793 Jy
! Component: 4000  -  total flux cleaned = 0.000780409 Jy
! Component: 4050  -  total flux cleaned = 0.000757508 Jy
! Total flux subtracted in 4096 components = 0.000734536 Jy
! Clean residual min=-0.000676 max=0.000692 Jy/beam
! Clean residual mean=0.000002 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.18966 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 402 components and 0.18966 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1424-1407_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.36 x 14.03 at -17.41 degrees (North through East)
! Clean map  min=-0.0015646  max=0.15684 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1424-1407_S_map.fits
wmodel /image_prod/ug002_uva//J1424-1407_S_map.mod
! Writing 402 model components to file: /image_prod/ug002_uva//J1424-1407_S_map.mod
wobs   /image_prod/ug002_uva//J1424-1407_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1424-1407_S_uvs.fits
wwins  /image_prod/ug002_uva//J1424-1407_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1424-1407_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.156843 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205126 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.392353 0.392353 0.784706 1.56941 3.13882 6.27765 12.5553 25.1106 50.2212
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.156 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  764.617 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1424-1407_S_dfm.log closed on Thu Mar  5 01:44:49 2020