! Started logfile: /image_prod/ug002_uva//J1424+0434_X_dfm.log on Thu Mar  5 01:43:32 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1424+0434_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1424+0434_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.988519 visibilities/baseline/integration-bin.
! Found source: J1424+0434
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 32028 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1424+0434_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008567Jy  sigma=9.369264
! Fit after  self-cal, rms=0.912498Jy  sigma=8.471847
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7613 mas, bmaj=3.306 mas, bpa=-19.72 degrees
! Estimated noise=0.802668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0665501 Jy
! Component: 100  -  total flux cleaned = 0.0814211 Jy
! Total flux subtracted in 100 components = 0.0814211 Jy
! Clean residual min=-0.002758 max=0.005214 Jy/beam
! Clean residual mean=-0.000007 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.0814212 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0814212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060022Jy  sigma=0.518294
! Fit after  self-cal, rms=0.059871Jy  sigma=0.517089
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573814 Jy
! Component: 100  -  total flux cleaned = 0.00898031 Jy
! Total flux subtracted in 100 components = 0.00898031 Jy
! Clean residual min=-0.002791 max=0.004652 Jy/beam
! Clean residual mean=-0.000004 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.0904015 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.0904015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059009Jy  sigma=0.508984
! Fit after  self-cal, rms=0.059015Jy  sigma=0.508924
! Inverting map 
! Added new window around map position (3.2, -4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422975 Jy
! Component: 100  -  total flux cleaned = 0.00677357 Jy
! Total flux subtracted in 100 components = 0.00677357 Jy
! Clean residual min=-0.002601 max=0.003199 Jy/beam
! Clean residual mean=-0.000004 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.097175 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.097175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058630Jy  sigma=0.505417
! Fit after  self-cal, rms=0.058611Jy  sigma=0.505270
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9971 mas, bmaj=3.37 mas, bpa=-18.39 degrees
! Estimated noise=0.432017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361151 Jy
! Component: 100  -  total flux cleaned = 0.00630633 Jy
! Component: 150  -  total flux cleaned = 0.00847842 Jy
! Component: 200  -  total flux cleaned = 0.0102911 Jy
! Total flux subtracted in 200 components = 0.0102911 Jy
! Clean residual min=-0.002917 max=0.002780 Jy/beam
! Clean residual mean=-0.000004 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.107466 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 62 components and 0.107466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058277Jy  sigma=0.502206
! Fit after  self-cal, rms=0.058279Jy  sigma=0.502129
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9971 x 3.37 at -18.39 degrees (North through East)
! Clean map  min=-0.0027801  max=0.088447 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.97     KP        1.02     
!   LA        1.00     MK        1.03     NL        1.09     OV        0.95     
!   PT        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.95     KP        1.04     
!   LA        0.94     MK        1.02     NL        1.12     OV        0.95     
!   PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.98     KP        1.06     
!   LA        0.98     MK        1.04     NL        1.12     OV        0.94     
!   PT        0.85     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.99     KP        1.06     
!   LA        0.98     MK        1.06     NL        1.10     OV        0.92     
!   PT        0.84     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.95     KP        1.05     
!   LA        1.01     MK        1.00     NL        1.12     OV        0.92     
!   PT        0.82     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.00     KP        1.04     
!   LA        0.98     MK        1.05     NL        1.14     OV        0.92     
!   PT        0.87     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.93     KP        1.06     
!   LA        1.02     MK        1.06     NL        1.12     OV        0.93     
!   PT        0.86     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.98     KP        1.04     
!   LA        0.97     MK        1.02     NL        1.15     OV        0.94     
!   PT        0.88     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.96     KP        1.05     
!   LA        0.94     MK        1.00     NL        1.13     OV        0.94     
!   PT        0.87     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        0.93     KP        1.03     
!   LA        0.97     MK        1.08     NL        1.11     OV        0.91     
!   PT        0.86     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        0.92     KP        1.05     
!   LA        1.01     MK        1.07     NL        1.08     OV        0.93     
!   PT        0.83     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.02     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.10     OV        0.93     
!   PT        0.89     
! 
! 
! Fit before self-cal, rms=0.058279Jy  sigma=0.502129
! Fit after  self-cal, rms=0.055805Jy  sigma=0.495021
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=3.376 mas, bpa=-18.18 degrees
! Estimated noise=0.426834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158333 Jy
! Component: 100  -  total flux cleaned = 0.00198036 Jy
! Component: 150  -  total flux cleaned = 0.00213524 Jy
! Component: 200  -  total flux cleaned = 0.00223482 Jy
! Total flux subtracted in 200 components = 0.00223482 Jy
! Clean residual min=-0.001352 max=0.001524 Jy/beam
! Clean residual mean=-0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.109701 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.109701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055725Jy  sigma=0.494290
! Fit after  self-cal, rms=0.055730Jy  sigma=0.494089
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055730Jy  sigma=0.494089
! Fit after  self-cal, rms=0.056186Jy  sigma=0.491912
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.375 mas, bpa=-18.15 degrees
! Estimated noise=0.426547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427412 Jy
! Component: 100  -  total flux cleaned = 0.000665282 Jy
! Component: 150  -  total flux cleaned = 0.000694652 Jy
! Component: 200  -  total flux cleaned = 0.000715614 Jy
! Total flux subtracted in 200 components = 0.000715614 Jy
! Clean residual min=-0.001188 max=0.001009 Jy/beam
! Clean residual mean=0.000000 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.110417 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.110417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056151Jy  sigma=0.491566
! Fit after  self-cal, rms=0.056171Jy  sigma=0.491513
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202087 Jy
! Component: 100  -  total flux cleaned = 0.000291564 Jy
! Component: 150  -  total flux cleaned = 0.000338133 Jy
! Component: 200  -  total flux cleaned = 0.000352052 Jy
! Total flux subtracted in 200 components = 0.000352052 Jy
! Clean residual min=-0.001172 max=0.001055 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.110769 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 117 components and 0.110769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056161Jy  sigma=0.491430
! Fit after  self-cal, rms=0.056160Jy  sigma=0.491425
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056160Jy  sigma=0.491425
! Fit after  self-cal, rms=0.056279Jy  sigma=0.491296
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.37 mas, bpa=-18.13 degrees
! Estimated noise=0.425379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161397 Jy
! Component: 100  -  total flux cleaned = -8.11377e-05 Jy
! Component: 150  -  total flux cleaned = -4.04035e-05 Jy
! Component: 200  -  total flux cleaned = -3.89595e-06 Jy
! Total flux subtracted in 200 components = -3.89595e-06 Jy
! Clean residual min=-0.001132 max=0.001003 Jy/beam
! Clean residual mean=-0.000000 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.110765 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 126 components and 0.110765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056270Jy  sigma=0.491210
! Fit after  self-cal, rms=0.056276Jy  sigma=0.491205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.7704e-05 Jy
! Component: 100  -  total flux cleaned = 0.000151155 Jy
! Component: 150  -  total flux cleaned = 0.000228652 Jy
! Component: 200  -  total flux cleaned = 0.000273049 Jy
! Total flux subtracted in 200 components = 0.000273049 Jy
! Clean residual min=-0.001122 max=0.001035 Jy/beam
! Clean residual mean=0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.111038 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 135 components and 0.111038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056273Jy  sigma=0.491177
! Fit after  self-cal, rms=0.056272Jy  sigma=0.491175
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056272Jy  sigma=0.491175
! Fit after  self-cal, rms=0.056337Jy  sigma=0.491153
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=3.583 mas, bpa=-10.66 degrees
! Estimated noise=0.493543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139343 Jy
! Component: 100  -  total flux cleaned = 0.000159704 Jy
! Component: 150  -  total flux cleaned = 0.00018688 Jy
! Component: 200  -  total flux cleaned = 0.000219769 Jy
! Total flux subtracted in 200 components = 0.000219769 Jy
! Clean residual min=-0.001048 max=0.001394 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.111258 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 161 components and 0.111258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056335Jy  sigma=0.491132
! Fit after  self-cal, rms=0.056338Jy  sigma=0.491130
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126413 Jy
! Component: 100  -  total flux cleaned = 0.00171589 Jy
! Component: 150  -  total flux cleaned = 0.00210454 Jy
! Component: 200  -  total flux cleaned = 0.0023734 Jy
! Total flux subtracted in 200 components = 0.0023734 Jy
! Clean residual min=-0.000933 max=0.000876 Jy/beam
! Clean residual mean=-0.000001 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.113631 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 198 components and 0.113631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056314Jy  sigma=0.490901
! Fit after  self-cal, rms=0.056311Jy  sigma=0.490886
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=3.366 mas, bpa=-18.11 degrees
! Estimated noise=0.424826 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 3.366 at -18.11 degrees (North through East)
! Clean map  min=-0.00087542  max=0.087465 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7679 mas, bmaj=3.28 mas, bpa=-19.56 degrees
! Estimated noise=0.8014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664075 Jy
! Component: 100  -  total flux cleaned = 0.0811476 Jy
! Component: 150  -  total flux cleaned = 0.0874957 Jy
! Component: 200  -  total flux cleaned = 0.0919566 Jy
! Total flux subtracted in 200 components = 0.0919566 Jy
! Clean residual min=-0.002007 max=0.002512 Jy/beam
! Clean residual mean=-0.000002 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0919567 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0919567 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=3.366 mas, bpa=-18.11 degrees
! Estimated noise=0.424826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00446199 Jy
! Component: 100  -  total flux cleaned = 0.00740826 Jy
! Component: 150  -  total flux cleaned = 0.00953173 Jy
! Component: 200  -  total flux cleaned = 0.011169 Jy
! Total flux subtracted in 200 components = 0.011169 Jy
! Clean residual min=-0.001229 max=0.001363 Jy/beam
! Clean residual mean=-0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.103126 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 69 components and 0.103126 Jy
! Inverting map 
! Added new window around map position (5.2, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146081 Jy
! Component: 100  -  total flux cleaned = 0.00262545 Jy
! Component: 150  -  total flux cleaned = 0.00362344 Jy
! Component: 200  -  total flux cleaned = 0.0044546 Jy
! Total flux subtracted in 200 components = 0.0044546 Jy
! Clean residual min=-0.001097 max=0.000820 Jy/beam
! Clean residual mean=-0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.10758 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 108 components and 0.10758 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=3.583 mas, bpa=-10.66 degrees
! Estimated noise=0.493543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119488 Jy
! Component: 100  -  total flux cleaned = 0.00215476 Jy
! Component: 150  -  total flux cleaned = 0.00284095 Jy
! Component: 200  -  total flux cleaned = 0.00347126 Jy
! Total flux subtracted in 200 components = 0.00347126 Jy
! Clean residual min=-0.000965 max=0.000844 Jy/beam
! Clean residual mean=-0.000002 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.111052 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560222 Jy
! Component: 100  -  total flux cleaned = 0.00106204 Jy
! Component: 150  -  total flux cleaned = 0.00151706 Jy
! Component: 200  -  total flux cleaned = 0.00182127 Jy
! Total flux subtracted in 200 components = 0.00182127 Jy
! Clean residual min=-0.000888 max=0.000852 Jy/beam
! Clean residual mean=-0.000001 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.112873 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 207 components and 0.112873 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=3.366 mas, bpa=-18.11 degrees
! Estimated noise=0.424826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206105 Jy
! Component: 100  -  total flux cleaned = -0.000126372 Jy
! Component: 150  -  total flux cleaned = 3.57434e-05 Jy
! Component: 200  -  total flux cleaned = 0.000182899 Jy
! Total flux subtracted in 200 components = 0.000182899 Jy
! Clean residual min=-0.000868 max=0.000708 Jy/beam
! Clean residual mean=-0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.113056 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 230 components and 0.113056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056298Jy  sigma=0.490775
! Fit after  self-cal, rms=0.056289Jy  sigma=0.490748
wmodel J1424+0434_X_map.mod
! Writing 230 model components to file: J1424+0434_X_map.mod
wobs   J1424+0434_X_uvs.fits
! Writing UV FITS file: J1424+0434_X_uvs.fits
wwins  J1424+0434_X_map.win
! wwins: Wrote 5 windows to J1424+0434_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000388712 Jy
! Component: 100  -  total flux cleaned = -0.000696229 Jy
! Component: 150  -  total flux cleaned = -0.000904385 Jy
! Component: 200  -  total flux cleaned = -0.00105373 Jy
! Component: 250  -  total flux cleaned = -0.00117324 Jy
! Component: 300  -  total flux cleaned = -0.00127754 Jy
! Component: 350  -  total flux cleaned = -0.00139028 Jy
! Component: 400  -  total flux cleaned = -0.00152212 Jy
! Component: 450  -  total flux cleaned = -0.00166172 Jy
! Component: 500  -  total flux cleaned = -0.0017774 Jy
! Component: 550  -  total flux cleaned = -0.0018701 Jy
! Component: 600  -  total flux cleaned = -0.00193104 Jy
! Component: 650  -  total flux cleaned = -0.00203041 Jy
! Component: 700  -  total flux cleaned = -0.00208916 Jy
! Component: 750  -  total flux cleaned = -0.00216633 Jy
! Component: 800  -  total flux cleaned = -0.00224221 Jy
! Component: 850  -  total flux cleaned = -0.00229862 Jy
! Component: 900  -  total flux cleaned = -0.00240974 Jy
! Component: 950  -  total flux cleaned = -0.00248281 Jy
! Component: 1000  -  total flux cleaned = -0.00252793 Jy
! Component: 1050  -  total flux cleaned = -0.00259954 Jy
! Component: 1100  -  total flux cleaned = -0.002679 Jy
! Component: 1150  -  total flux cleaned = -0.00273147 Jy
! Component: 1200  -  total flux cleaned = -0.00280919 Jy
! Component: 1250  -  total flux cleaned = -0.00287747 Jy
! Component: 1300  -  total flux cleaned = -0.00293653 Jy
! Component: 1350  -  total flux cleaned = -0.00300357 Jy
! Component: 1400  -  total flux cleaned = -0.00305333 Jy
! Component: 1450  -  total flux cleaned = -0.0031191 Jy
! Component: 1500  -  total flux cleaned = -0.00315997 Jy
! Component: 1550  -  total flux cleaned = -0.00322464 Jy
! Component: 1600  -  total flux cleaned = -0.00328876 Jy
! Component: 1650  -  total flux cleaned = -0.00333639 Jy
! Component: 1700  -  total flux cleaned = -0.00337568 Jy
! Component: 1750  -  total flux cleaned = -0.00343817 Jy
! Component: 1800  -  total flux cleaned = -0.00350003 Jy
! Component: 1850  -  total flux cleaned = -0.00353845 Jy
! Component: 1900  -  total flux cleaned = -0.00359174 Jy
! Component: 1950  -  total flux cleaned = -0.00362965 Jy
! Component: 2000  -  total flux cleaned = -0.00368212 Jy
! Component: 2050  -  total flux cleaned = -0.00371185 Jy
! Component: 2100  -  total flux cleaned = -0.00374887 Jy
! Component: 2150  -  total flux cleaned = -0.00382941 Jy
! Component: 2200  -  total flux cleaned = -0.0038294 Jy
! Component: 2250  -  total flux cleaned = -0.00389436 Jy
! Component: 2300  -  total flux cleaned = -0.00393016 Jy
! Component: 2350  -  total flux cleaned = -0.00396574 Jy
! Component: 2400  -  total flux cleaned = -0.00400114 Jy
! Component: 2450  -  total flux cleaned = -0.00402926 Jy
! Component: 2500  -  total flux cleaned = -0.00408503 Jy
! Component: 2550  -  total flux cleaned = -0.00413352 Jy
! Component: 2600  -  total flux cleaned = -0.00415412 Jy
! Component: 2650  -  total flux cleaned = -0.00416097 Jy
! Component: 2700  -  total flux cleaned = -0.00418138 Jy
! Component: 2750  -  total flux cleaned = -0.00422179 Jy
! Component: 2800  -  total flux cleaned = -0.00427543 Jy
! Component: 2850  -  total flux cleaned = -0.00428201 Jy
! Component: 2900  -  total flux cleaned = -0.00428865 Jy
! Component: 2950  -  total flux cleaned = -0.00430832 Jy
! Component: 3000  -  total flux cleaned = -0.00434753 Jy
! Component: 3050  -  total flux cleaned = -0.0043605 Jy
! Component: 3100  -  total flux cleaned = -0.0043864 Jy
! Component: 3150  -  total flux cleaned = -0.00441201 Jy
! Component: 3200  -  total flux cleaned = -0.00440563 Jy
! Component: 3250  -  total flux cleaned = -0.00445012 Jy
! Component: 3300  -  total flux cleaned = -0.00444388 Jy
! Component: 3350  -  total flux cleaned = -0.00446898 Jy
! Component: 3400  -  total flux cleaned = -0.00448145 Jy
! Component: 3450  -  total flux cleaned = -0.00451254 Jy
! Component: 3500  -  total flux cleaned = -0.00449398 Jy
! Component: 3550  -  total flux cleaned = -0.00455545 Jy
! Component: 3600  -  total flux cleaned = -0.00453714 Jy
! Component: 3650  -  total flux cleaned = -0.00457371 Jy
! Component: 3700  -  total flux cleaned = -0.00459795 Jy
! Component: 3750  -  total flux cleaned = -0.00464612 Jy
! Component: 3800  -  total flux cleaned = -0.00464615 Jy
! Component: 3850  -  total flux cleaned = -0.00466999 Jy
! Component: 3900  -  total flux cleaned = -0.00467595 Jy
! Component: 3950  -  total flux cleaned = -0.00472327 Jy
! Component: 4000  -  total flux cleaned = -0.00472915 Jy
! Component: 4050  -  total flux cleaned = -0.00474087 Jy
! Total flux subtracted in 4096 components = -0.00477581 Jy
! Clean residual min=-0.000536 max=0.000437 Jy/beam
! Clean residual mean=-0.000000 rms=0.000107 Jy/beam
! Combined flux in latest and established models = 0.10828 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 514 components and 0.10828 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1424+0434_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 3.366 at -18.11 degrees (North through East)
! Clean map  min=-0.00073701  max=0.087421 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1424+0434_X_map.fits
wmodel /image_prod/ug002_uva//J1424+0434_X_map.mod
! Writing 514 model components to file: /image_prod/ug002_uva//J1424+0434_X_map.mod
wobs   /image_prod/ug002_uva//J1424+0434_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1424+0434_X_uvs.fits
wwins  /image_prod/ug002_uva//J1424+0434_X_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1424+0434_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0874213 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106743 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.366306 0.366306 0.732611 1.46522 2.93045 5.86089 11.7218 23.4436 46.8871 93.7743
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  818.988 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1424+0434_X_dfm.log closed on Thu Mar  5 01:43:37 2020