! Started logfile: /image_prod/ug002_uva//J1422+0414_S_dfm.log on Thu Mar  5 01:42:27 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1422+0414_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1422+0414_S_uva.fits
! AN table 1: 45 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.995679 visibilities/baseline/integration-bin.
! Found source: J1422+0414
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4839 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1422+0414_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.006164Jy  sigma=8.555126
! Fit after  self-cal, rms=0.924993Jy  sigma=7.882208
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=13.3 mas, bpa=-18.69 degrees
! Estimated noise=1.67215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0599692 Jy
! Component: 100  -  total flux cleaned = 0.0730895 Jy
! Total flux subtracted in 100 components = 0.0730895 Jy
! Clean residual min=-0.003644 max=0.003704 Jy/beam
! Clean residual mean=0.000002 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.0730895 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0730895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062771Jy  sigma=0.467759
! Fit after  self-cal, rms=0.062394Jy  sigma=0.465387
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.799 mas, bmaj=13.95 mas, bpa=-18.22 degrees
! Estimated noise=1.23085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237809 Jy
! Component: 100  -  total flux cleaned = 0.00258418 Jy
! Component: 150  -  total flux cleaned = 0.00264333 Jy
! Component: 200  -  total flux cleaned = 0.00255089 Jy
! Total flux subtracted in 200 components = 0.00255089 Jy
! Clean residual min=-0.002737 max=0.002666 Jy/beam
! Clean residual mean=-0.000001 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.0756404 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0756404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062181Jy  sigma=0.463964
! Fit after  self-cal, rms=0.062174Jy  sigma=0.463946
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.799 x 13.95 at -18.22 degrees (North through East)
! Clean map  min=-0.0026333  max=0.076963 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.02     KP        0.97     
!   LA        1.03     MK        1.02     NL        0.97     OV        0.97     
!   PT        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.04     HN        0.97     KP        1.00     
!   LA        1.04     MK        0.94     NL        0.92     OV        0.98     
!   PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.03     KP        0.98     
!   LA        1.06     MK        0.97     NL        0.92     OV        1.00     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.062174Jy  sigma=0.463946
! Fit after  self-cal, rms=0.060042Jy  sigma=0.462292
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.775 mas, bmaj=13.84 mas, bpa=-18.31 degrees
! Estimated noise=1.22069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110283 Jy
! Component: 100  -  total flux cleaned = 0.00133514 Jy
! Component: 150  -  total flux cleaned = 0.00139269 Jy
! Component: 200  -  total flux cleaned = 0.00141702 Jy
! Total flux subtracted in 200 components = 0.00141702 Jy
! Clean residual min=-0.002475 max=0.002495 Jy/beam
! Clean residual mean=0.000002 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0770575 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.0770575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060001Jy  sigma=0.462036
! Fit after  self-cal, rms=0.059989Jy  sigma=0.461969
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059989Jy  sigma=0.461969
! Fit after  self-cal, rms=0.059620Jy  sigma=0.459988
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.758 mas, bmaj=13.83 mas, bpa=-18.33 degrees
! Estimated noise=1.22189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000463932 Jy
! Component: 100  -  total flux cleaned = 0.0005448 Jy
! Component: 150  -  total flux cleaned = 0.000590571 Jy
! Component: 200  -  total flux cleaned = 0.000590189 Jy
! Total flux subtracted in 200 components = 0.000590189 Jy
! Clean residual min=-0.002254 max=0.002258 Jy/beam
! Clean residual mean=-0.000001 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.0776476 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.0776476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059592Jy  sigma=0.459853
! Fit after  self-cal, rms=0.059604Jy  sigma=0.459797
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84956e-05 Jy
! Component: 100  -  total flux cleaned = 3.74461e-05 Jy
! Component: 150  -  total flux cleaned = 5.41343e-05 Jy
! Component: 200  -  total flux cleaned = 6.95568e-05 Jy
! Total flux subtracted in 200 components = 6.95568e-05 Jy
! Clean residual min=-0.002250 max=0.002248 Jy/beam
! Clean residual mean=-0.000001 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.0777172 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 0.0777172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059590Jy  sigma=0.459734
! Fit after  self-cal, rms=0.059588Jy  sigma=0.459728
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059588Jy  sigma=0.459728
! Fit after  self-cal, rms=0.059344Jy  sigma=0.459548
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.744 mas, bmaj=13.8 mas, bpa=-18.32 degrees
! Estimated noise=1.21966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464217 Jy
! Component: 100  -  total flux cleaned = 0.000501276 Jy
! Component: 150  -  total flux cleaned = 0.000533205 Jy
! Component: 200  -  total flux cleaned = 0.000547808 Jy
! Total flux subtracted in 200 components = 0.000547808 Jy
! Clean residual min=-0.002170 max=0.002221 Jy/beam
! Clean residual mean=-0.000002 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.078265 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.078265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059331Jy  sigma=0.459486
! Fit after  self-cal, rms=0.059329Jy  sigma=0.459476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.47098e-05 Jy
! Component: 100  -  total flux cleaned = 3.76472e-05 Jy
! Component: 150  -  total flux cleaned = 4.95031e-05 Jy
! Component: 200  -  total flux cleaned = 4.97119e-05 Jy
! Total flux subtracted in 200 components = 4.97119e-05 Jy
! Clean residual min=-0.002161 max=0.002209 Jy/beam
! Clean residual mean=-0.000002 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0783147 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.0783147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059323Jy  sigma=0.459439
! Fit after  self-cal, rms=0.059321Jy  sigma=0.459435
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059321Jy  sigma=0.459435
! Fit after  self-cal, rms=0.059252Jy  sigma=0.459421
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.912 mas, bmaj=14.25 mas, bpa=-14.07 degrees
! Estimated noise=1.4089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351535 Jy
! Component: 100  -  total flux cleaned = 0.000371256 Jy
! Component: 150  -  total flux cleaned = 0.000394378 Jy
! Component: 200  -  total flux cleaned = 0.000408525 Jy
! Total flux subtracted in 200 components = 0.000408525 Jy
! Clean residual min=-0.002025 max=0.002606 Jy/beam
! Clean residual mean=-0.000004 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0787233 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.0787233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059251Jy  sigma=0.459423
! Fit after  self-cal, rms=0.059248Jy  sigma=0.459414
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.38643e-07 Jy
! Component: 100  -  total flux cleaned = 7.45923e-06 Jy
! Component: 150  -  total flux cleaned = 3.58544e-07 Jy
! Component: 200  -  total flux cleaned = 3.20017e-07 Jy
! Total flux subtracted in 200 components = 3.20017e-07 Jy
! Clean residual min=-0.002033 max=0.002607 Jy/beam
! Clean residual mean=-0.000004 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0787236 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 77 components and 0.0787236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059248Jy  sigma=0.459417
! Fit after  self-cal, rms=0.059247Jy  sigma=0.459412
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.735 mas, bmaj=13.8 mas, bpa=-18.32 degrees
! Estimated noise=1.21914 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.735 x 13.8 at -18.32 degrees (North through East)
! Clean map  min=-0.0020776  max=0.076465 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.098 mas, bmaj=13.22 mas, bpa=-18.84 degrees
! Estimated noise=1.64896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0593004 Jy
! Component: 100  -  total flux cleaned = 0.0723631 Jy
! Component: 150  -  total flux cleaned = 0.0761082 Jy
! Component: 200  -  total flux cleaned = 0.077454 Jy
! Total flux subtracted in 200 components = 0.077454 Jy
! Clean residual min=-0.003583 max=0.002752 Jy/beam
! Clean residual mean=-0.000000 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.077454 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.077454 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.735 mas, bmaj=13.8 mas, bpa=-18.32 degrees
! Estimated noise=1.21914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127305 Jy
! Component: 100  -  total flux cleaned = 0.00142342 Jy
! Component: 150  -  total flux cleaned = 0.00131489 Jy
! Component: 200  -  total flux cleaned = 0.00131427 Jy
! Total flux subtracted in 200 components = 0.00131427 Jy
! Clean residual min=-0.002271 max=0.002083 Jy/beam
! Clean residual mean=-0.000002 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.0787683 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 45 components and 0.0787683 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.912 mas, bmaj=14.25 mas, bpa=-14.07 degrees
! Estimated noise=1.4089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108048 Jy
! Component: 100  -  total flux cleaned = 0.000167669 Jy
! Component: 150  -  total flux cleaned = 0.000132301 Jy
! Component: 200  -  total flux cleaned = 0.000131693 Jy
! Total flux subtracted in 200 components = 0.000131693 Jy
! Clean residual min=-0.002038 max=0.002475 Jy/beam
! Clean residual mean=-0.000003 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0789 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.49941e-05 Jy
! Component: 100  -  total flux cleaned = -1.52072e-05 Jy
! Component: 150  -  total flux cleaned = -2.81532e-05 Jy
! Component: 200  -  total flux cleaned = -4.02933e-05 Jy
! Total flux subtracted in 200 components = -4.02933e-05 Jy
! Clean residual min=-0.002039 max=0.002520 Jy/beam
! Clean residual mean=-0.000003 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.0788597 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 72 components and 0.0788597 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.735 mas, bmaj=13.8 mas, bpa=-18.32 degrees
! Estimated noise=1.21914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.11318e-05 Jy
! Component: 100  -  total flux cleaned = -8.91595e-05 Jy
! Component: 150  -  total flux cleaned = -0.000111018 Jy
! Component: 200  -  total flux cleaned = -0.000130133 Jy
! Total flux subtracted in 200 components = -0.000130133 Jy
! Clean residual min=-0.002205 max=0.002119 Jy/beam
! Clean residual mean=-0.000002 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0787295 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.0787295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059257Jy  sigma=0.459481
! Fit after  self-cal, rms=0.059261Jy  sigma=0.459469
wmodel J1422+0414_S_map.mod
! Writing 82 model components to file: J1422+0414_S_map.mod
wobs   J1422+0414_S_uvs.fits
! Writing UV FITS file: J1422+0414_S_uvs.fits
wwins  J1422+0414_S_map.win
! wwins: Wrote 1 windows to J1422+0414_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -3.87959e-06 Jy
! Component: 100  -  total flux cleaned = -4.33794e-06 Jy
! Component: 150  -  total flux cleaned = -0.000177414 Jy
! Component: 200  -  total flux cleaned = -0.000376454 Jy
! Component: 250  -  total flux cleaned = -0.000600196 Jy
! Component: 300  -  total flux cleaned = -0.000785932 Jy
! Component: 350  -  total flux cleaned = -0.00096726 Jy
! Component: 400  -  total flux cleaned = -0.00123258 Jy
! Component: 450  -  total flux cleaned = -0.00143378 Jy
! Component: 500  -  total flux cleaned = -0.00165825 Jy
! Component: 550  -  total flux cleaned = -0.0018771 Jy
! Component: 600  -  total flux cleaned = -0.00211785 Jy
! Component: 650  -  total flux cleaned = -0.00235291 Jy
! Component: 700  -  total flux cleaned = -0.00250611 Jy
! Component: 750  -  total flux cleaned = -0.00268139 Jy
! Component: 800  -  total flux cleaned = -0.00280419 Jy
! Component: 850  -  total flux cleaned = -0.00299627 Jy
! Component: 900  -  total flux cleaned = -0.00313734 Jy
! Component: 950  -  total flux cleaned = -0.00325262 Jy
! Component: 1000  -  total flux cleaned = -0.00327605 Jy
! Component: 1050  -  total flux cleaned = -0.00343326 Jy
! Component: 1100  -  total flux cleaned = -0.00360955 Jy
! Component: 1150  -  total flux cleaned = -0.00371771 Jy
! Component: 1200  -  total flux cleaned = -0.00380289 Jy
! Component: 1250  -  total flux cleaned = -0.00395025 Jy
! Component: 1300  -  total flux cleaned = -0.00401201 Jy
! Component: 1350  -  total flux cleaned = -0.00413437 Jy
! Component: 1400  -  total flux cleaned = -0.00413465 Jy
! Component: 1450  -  total flux cleaned = -0.00425408 Jy
! Component: 1500  -  total flux cleaned = -0.00429344 Jy
! Component: 1550  -  total flux cleaned = -0.00435155 Jy
! Component: 1600  -  total flux cleaned = -0.00437105 Jy
! Component: 1650  -  total flux cleaned = -0.00442809 Jy
! Component: 1700  -  total flux cleaned = -0.00457717 Jy
! Component: 1750  -  total flux cleaned = -0.00466883 Jy
! Component: 1800  -  total flux cleaned = -0.0046505 Jy
! Component: 1850  -  total flux cleaned = -0.00459664 Jy
! Component: 1900  -  total flux cleaned = -0.00461443 Jy
! Component: 1950  -  total flux cleaned = -0.00461426 Jy
! Component: 2000  -  total flux cleaned = -0.00461418 Jy
! Component: 2050  -  total flux cleaned = -0.00454519 Jy
! Component: 2100  -  total flux cleaned = -0.00457943 Jy
! Component: 2150  -  total flux cleaned = -0.00454558 Jy
! Component: 2200  -  total flux cleaned = -0.00454525 Jy
! Component: 2250  -  total flux cleaned = -0.00454526 Jy
! Component: 2300  -  total flux cleaned = -0.00456145 Jy
! Component: 2350  -  total flux cleaned = -0.00451273 Jy
! Component: 2400  -  total flux cleaned = -0.00446432 Jy
! Component: 2450  -  total flux cleaned = -0.0044487 Jy
! Component: 2500  -  total flux cleaned = -0.00451192 Jy
! Component: 2550  -  total flux cleaned = -0.00446499 Jy
! Component: 2600  -  total flux cleaned = -0.00451108 Jy
! Component: 2650  -  total flux cleaned = -0.00444981 Jy
! Component: 2700  -  total flux cleaned = -0.00448029 Jy
! Component: 2750  -  total flux cleaned = -0.00449512 Jy
! Component: 2800  -  total flux cleaned = -0.00448011 Jy
! Component: 2850  -  total flux cleaned = -0.004495 Jy
! Component: 2900  -  total flux cleaned = -0.00453897 Jy
! Component: 2950  -  total flux cleaned = -0.00458242 Jy
! Component: 3000  -  total flux cleaned = -0.00451044 Jy
! Component: 3050  -  total flux cleaned = -0.00452475 Jy
! Component: 3100  -  total flux cleaned = -0.0045392 Jy
! Component: 3150  -  total flux cleaned = -0.00458136 Jy
! Component: 3200  -  total flux cleaned = -0.00460914 Jy
! Component: 3250  -  total flux cleaned = -0.00460908 Jy
! Component: 3300  -  total flux cleaned = -0.00463641 Jy
! Component: 3350  -  total flux cleaned = -0.00463643 Jy
! Component: 3400  -  total flux cleaned = -0.00463647 Jy
! Component: 3450  -  total flux cleaned = -0.00470333 Jy
! Component: 3500  -  total flux cleaned = -0.00471646 Jy
! Component: 3550  -  total flux cleaned = -0.00470321 Jy
! Component: 3600  -  total flux cleaned = -0.00469015 Jy
! Component: 3650  -  total flux cleaned = -0.00466426 Jy
! Component: 3700  -  total flux cleaned = -0.00465154 Jy
! Component: 3750  -  total flux cleaned = -0.00466421 Jy
! Component: 3800  -  total flux cleaned = -0.00461355 Jy
! Component: 3850  -  total flux cleaned = -0.004601 Jy
! Component: 3900  -  total flux cleaned = -0.00461348 Jy
! Component: 3950  -  total flux cleaned = -0.00455141 Jy
! Component: 4000  -  total flux cleaned = -0.00458847 Jy
! Component: 4050  -  total flux cleaned = -0.00455173 Jy
! Total flux subtracted in 4096 components = -0.00455164 Jy
! Clean residual min=-0.000772 max=0.000718 Jy/beam
! Clean residual mean=-0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.0741779 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 356 components and 0.0741779 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1422+0414_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.735 x 13.8 at -18.32 degrees (North through East)
! Clean map  min=-0.0016967  max=0.076043 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1422+0414_S_map.fits
wmodel /image_prod/ug002_uva//J1422+0414_S_map.mod
! Writing 356 model components to file: /image_prod/ug002_uva//J1422+0414_S_map.mod
wobs   /image_prod/ug002_uva//J1422+0414_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1422+0414_S_uvs.fits
wwins  /image_prod/ug002_uva//J1422+0414_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1422+0414_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0760428 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00023999 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.946797 0.946797 1.89359 3.78719 7.57437 15.1487 30.2975 60.595
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  316.857 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1422+0414_S_dfm.log closed on Thu Mar  5 01:42:30 2020