! Started logfile: /image_prod/ug002_uva//J1419+5423_X_b_dfm.log on Thu Mar 5 01:41:00 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1419+5423_X_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1419+5423_X_b_uva.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.728042 visibilities/baseline/integration-bin. ! Found source: J1419+5423 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8256 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1419+5423_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.252169Jy sigma=8.144003 ! Fit after self-cal, rms=0.431160Jy sigma=3.066637 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8008 mas, bmaj=0.9301 mas, bpa=-7.879 degrees ! Estimated noise=1.67354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.452256 Jy ! Component: 100 - total flux cleaned = 0.586248 Jy ! Total flux subtracted in 100 components = 0.586248 Jy ! Clean residual min=-0.035861 max=0.130574 Jy/beam ! Clean residual mean=0.000077 rms=0.009217 Jy/beam ! Combined flux in latest and established models = 0.586248 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.586248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.271643Jy sigma=1.616073 ! Fit after self-cal, rms=0.271156Jy sigma=1.612985 ! Inverting map ! Added new window around map position (1, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119142 Jy ! Component: 100 - total flux cleaned = 0.185144 Jy ! Total flux subtracted in 100 components = 0.185144 Jy ! Clean residual min=-0.024123 max=0.036494 Jy/beam ! Clean residual mean=0.000051 rms=0.005634 Jy/beam ! Combined flux in latest and established models = 0.771392 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.771392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177604Jy sigma=1.048974 ! Fit after self-cal, rms=0.171995Jy sigma=1.005619 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507625 Jy ! Component: 100 - total flux cleaned = 0.0849012 Jy ! Total flux subtracted in 100 components = 0.0849012 Jy ! Clean residual min=-0.018926 max=0.027363 Jy/beam ! Clean residual mean=0.000039 rms=0.004193 Jy/beam ! Combined flux in latest and established models = 0.856293 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.856293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139442Jy sigma=0.820493 ! Fit after self-cal, rms=0.138571Jy sigma=0.812971 ! Inverting map ! Added new window around map position (2.2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303655 Jy ! Component: 100 - total flux cleaned = 0.0525218 Jy ! Total flux subtracted in 100 components = 0.0525218 Jy ! Clean residual min=-0.015444 max=0.023367 Jy/beam ! Clean residual mean=0.000032 rms=0.003656 Jy/beam ! Combined flux in latest and established models = 0.908815 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.908815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123253Jy sigma=0.728756 ! Fit after self-cal, rms=0.122950Jy sigma=0.725235 ! Inverting map ! Added new window around map position (-22, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023386 Jy ! Component: 100 - total flux cleaned = 0.0412678 Jy ! Total flux subtracted in 100 components = 0.0412678 Jy ! Clean residual min=-0.013839 max=0.017731 Jy/beam ! Clean residual mean=0.000029 rms=0.003298 Jy/beam ! Combined flux in latest and established models = 0.950082 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.950082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113455Jy sigma=0.673435 ! Fit after self-cal, rms=0.113276Jy sigma=0.671699 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9907 mas, bmaj=1.129 mas, bpa=-3.517 degrees ! Estimated noise=1.20685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304416 Jy ! Component: 100 - total flux cleaned = 0.0538208 Jy ! Component: 150 - total flux cleaned = 0.073025 Jy ! Component: 200 - total flux cleaned = 0.0889925 Jy ! Total flux subtracted in 200 components = 0.0889925 Jy ! Clean residual min=-0.012720 max=0.018906 Jy/beam ! Clean residual mean=0.000037 rms=0.003483 Jy/beam ! Combined flux in latest and established models = 1.03907 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 79 components and 1.03908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097482Jy sigma=0.589926 ! Fit after self-cal, rms=0.097042Jy sigma=0.585431 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9907 x 1.129 at -3.517 degrees (North through East) ! Clean map min=-0.011532 max=0.60816 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.98 KP 0.98 ! LA 0.96 MK 0.98 NL 1.04 OV 0.98 ! PT 0.93 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.98 KP 0.99 ! LA 0.96 MK 0.98 NL 1.06 OV 0.99 ! PT 0.92 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.98 ! LA 0.97 MK 1.00 NL 1.04 OV 0.97 ! PT 0.93 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 0.98 ! LA 0.98 MK 0.98 NL 1.04 OV 0.99 ! PT 0.92 SC 1.10 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.98 KP 0.98 ! LA 0.97 MK 1.00 NL 1.01 OV 0.99 ! PT 0.92 SC 1.11 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 0.97 ! LA 0.97 MK 1.02 NL 1.06 OV 0.99 ! PT 0.93 SC 1.16 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 0.96 ! LA 0.97 MK 1.00 NL 1.02 OV 0.98 ! PT 0.93 SC 1.12 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.99 KP 0.97 ! LA 0.98 MK 1.01 NL 1.00 OV 0.98 ! PT 0.93 SC 1.11 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.00 KP 0.98 ! LA 0.96 MK 1.01 NL 1.01 OV 0.98 ! PT 0.93 SC 1.11 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 0.99 ! LA 0.97 MK 1.01 NL 1.12 OV 0.98 ! PT 0.94 SC 1.09 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.96 KP 0.98 ! LA 0.98 MK 1.01 NL 0.98 OV 0.99 ! PT 0.91 SC 1.11 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.98 ! LA 0.97 MK 1.01 NL 1.01 OV 0.99 ! PT 0.92 SC 1.11 ! ! ! Fit before self-cal, rms=0.097042Jy sigma=0.585431 ! Fit after self-cal, rms=0.084067Jy sigma=0.515765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=1.147 mas, bpa=-4.77 degrees ! Estimated noise=1.1963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008886 Jy ! Component: 100 - total flux cleaned = 0.00924327 Jy ! Component: 150 - total flux cleaned = 0.00868911 Jy ! Component: 200 - total flux cleaned = 0.00844759 Jy ! Total flux subtracted in 200 components = 0.00844759 Jy ! Clean residual min=-0.009482 max=0.010827 Jy/beam ! Clean residual mean=0.000004 rms=0.002249 Jy/beam ! Combined flux in latest and established models = 1.04752 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 1.04752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081636Jy sigma=0.500336 ! Fit after self-cal, rms=0.081579Jy sigma=0.499536 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081579Jy sigma=0.499536 ! Fit after self-cal, rms=0.071347Jy sigma=0.435729 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=1.14 mas, bpa=-3.609 degrees ! Estimated noise=1.19733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739183 Jy ! Component: 100 - total flux cleaned = -0.000201608 Jy ! Component: 150 - total flux cleaned = -0.00019976 Jy ! Component: 200 - total flux cleaned = -2.2254e-05 Jy ! Total flux subtracted in 200 components = -2.2254e-05 Jy ! Clean residual min=-0.005772 max=0.005713 Jy/beam ! Clean residual mean=-0.000016 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 1.0475 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 1.0475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069594Jy sigma=0.424560 ! Fit after self-cal, rms=0.069492Jy sigma=0.423701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.6, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400052 Jy ! Component: 100 - total flux cleaned = 0.0042993 Jy ! Component: 150 - total flux cleaned = 0.00442438 Jy ! Component: 200 - total flux cleaned = 0.00465071 Jy ! Total flux subtracted in 200 components = 0.00465071 Jy ! Clean residual min=-0.005393 max=0.004934 Jy/beam ! Clean residual mean=-0.000018 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 1.05215 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 129 components and 1.05215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068816Jy sigma=0.419409 ! Fit after self-cal, rms=0.068783Jy sigma=0.419125 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068783Jy sigma=0.419125 ! Fit after self-cal, rms=0.068428Jy sigma=0.416153 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9997 mas, bmaj=1.138 mas, bpa=-3.424 degrees ! Estimated noise=1.19598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112742 Jy ! Component: 100 - total flux cleaned = -0.00147067 Jy ! Component: 150 - total flux cleaned = -0.00120367 Jy ! Component: 200 - total flux cleaned = -0.000846477 Jy ! Total flux subtracted in 200 components = -0.000846477 Jy ! Clean residual min=-0.004679 max=0.004478 Jy/beam ! Clean residual mean=-0.000014 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 1.0513 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 133 components and 1.0513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067742Jy sigma=0.411868 ! Fit after self-cal, rms=0.067695Jy sigma=0.411545 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428917 Jy ! Component: 100 - total flux cleaned = 0.000432992 Jy ! Component: 150 - total flux cleaned = 0.00043516 Jy ! Component: 200 - total flux cleaned = 0.00035346 Jy ! Total flux subtracted in 200 components = 0.00035346 Jy ! Clean residual min=-0.004441 max=0.004159 Jy/beam ! Clean residual mean=-0.000015 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 1.05166 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 141 components and 1.05166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067440Jy sigma=0.409815 ! Fit after self-cal, rms=0.067420Jy sigma=0.409685 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067420Jy sigma=0.409685 ! Fit after self-cal, rms=0.067341Jy sigma=0.408476 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.068 mas, bmaj=2.34 mas, bpa=49.92 degrees ! Estimated noise=1.68812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308503 Jy ! Component: 100 - total flux cleaned = -0.00275501 Jy ! Component: 150 - total flux cleaned = -0.0025776 Jy ! Component: 200 - total flux cleaned = -0.00234568 Jy ! Total flux subtracted in 200 components = -0.00234568 Jy ! Clean residual min=-0.004432 max=0.004732 Jy/beam ! Clean residual mean=-0.000031 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 1.04931 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 159 components and 1.04931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067137Jy sigma=0.407388 ! Fit after self-cal, rms=0.067127Jy sigma=0.407270 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153041 Jy ! Component: 100 - total flux cleaned = -2.90147e-05 Jy ! Component: 150 - total flux cleaned = 0.000131144 Jy ! Component: 200 - total flux cleaned = 0.000179584 Jy ! Total flux subtracted in 200 components = 0.000179584 Jy ! Clean residual min=-0.004027 max=0.004480 Jy/beam ! Clean residual mean=-0.000033 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 1.04949 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 166 components and 1.04949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067058Jy sigma=0.406935 ! Fit after self-cal, rms=0.067054Jy sigma=0.406890 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9985 mas, bmaj=1.137 mas, bpa=-3.235 degrees ! Estimated noise=1.19475 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9985 x 1.137 at -3.235 degrees (North through East) ! Clean map min=-0.0036013 max=0.60128 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067054Jy sigma=0.406890 ! Fit after self-cal, rms=0.063306Jy sigma=0.377543 ! Inverting map and beam ! Estimated beam: bmin=0.9981 mas, bmaj=1.137 mas, bpa=-3.219 degrees ! Estimated noise=1.19391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005101 Jy ! Component: 100 - total flux cleaned = 2.97008e-05 Jy ! Component: 150 - total flux cleaned = -0.000139445 Jy ! Component: 200 - total flux cleaned = -0.000446295 Jy ! Total flux subtracted in 200 components = -0.000446295 Jy ! Clean residual min=-0.003534 max=0.003227 Jy/beam ! Clean residual mean=-0.000013 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 1.04905 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 169 components and 1.04905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063050Jy sigma=0.375774 ! Fit after self-cal, rms=0.063033Jy sigma=0.375687 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.54647e-05 Jy ! Component: 100 - total flux cleaned = -0.000245552 Jy ! Component: 150 - total flux cleaned = -0.000370048 Jy ! Component: 200 - total flux cleaned = -0.000543161 Jy ! Total flux subtracted in 200 components = -0.000543161 Jy ! Clean residual min=-0.003414 max=0.002988 Jy/beam ! Clean residual mean=-0.000014 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 1.0485 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 175 components and 1.0485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062912Jy sigma=0.374790 ! Fit after self-cal, rms=0.062903Jy sigma=0.374728 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062903Jy sigma=0.374728 ! Fit after self-cal, rms=0.062898Jy sigma=0.374371 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8056 mas, bmaj=0.9365 mas, bpa=-7.139 degrees ! Estimated noise=1.66612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.451984 Jy ! Component: 100 - total flux cleaned = 0.622831 Jy ! Component: 150 - total flux cleaned = 0.720745 Jy ! Component: 200 - total flux cleaned = 0.784612 Jy ! Total flux subtracted in 200 components = 0.784612 Jy ! Clean residual min=-0.012945 max=0.035380 Jy/beam ! Clean residual mean=0.000037 rms=0.003746 Jy/beam ! Combined flux in latest and established models = 0.784612 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.784612 Jy ! Inverting map and beam ! Estimated beam: bmin=0.997 mas, bmaj=1.136 mas, bpa=-2.992 degrees ! Estimated noise=1.19325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695282 Jy ! Component: 100 - total flux cleaned = 0.113471 Jy ! Component: 150 - total flux cleaned = 0.144404 Jy ! Component: 200 - total flux cleaned = 0.167286 Jy ! Total flux subtracted in 200 components = 0.167286 Jy ! Clean residual min=-0.006906 max=0.013147 Jy/beam ! Clean residual mean=0.000008 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 0.951898 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.951897 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171612 Jy ! Component: 100 - total flux cleaned = 0.0302803 Jy ! Component: 150 - total flux cleaned = 0.0405322 Jy ! Component: 200 - total flux cleaned = 0.0487995 Jy ! Total flux subtracted in 200 components = 0.0487995 Jy ! Clean residual min=-0.004722 max=0.005709 Jy/beam ! Clean residual mean=-0.000004 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 1.0007 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 82 components and 1.0007 Jy ! Inverting map ! Added new window around map position (4.6, -26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694956 Jy ! Component: 100 - total flux cleaned = 0.0128103 Jy ! Component: 150 - total flux cleaned = 0.0178616 Jy ! Component: 200 - total flux cleaned = 0.0222301 Jy ! Total flux subtracted in 200 components = 0.0222301 Jy ! Clean residual min=-0.004012 max=0.004186 Jy/beam ! Clean residual mean=-0.000008 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 1.02293 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 106 components and 1.02293 Jy ! Inverting map ! Added new window around map position (-4, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420824 Jy ! Component: 100 - total flux cleaned = 0.00757319 Jy ! Component: 150 - total flux cleaned = 0.0105312 Jy ! Component: 200 - total flux cleaned = 0.0131448 Jy ! Total flux subtracted in 200 components = 0.0131448 Jy ! Clean residual min=-0.003462 max=0.003074 Jy/beam ! Clean residual mean=-0.000010 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 1.03607 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 126 components and 1.03607 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.066 mas, bmaj=2.34 mas, bpa=49.94 degrees ! Estimated noise=1.68934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419225 Jy ! Component: 100 - total flux cleaned = 0.00715821 Jy ! Component: 150 - total flux cleaned = 0.00934896 Jy ! Component: 200 - total flux cleaned = 0.0103241 Jy ! Total flux subtracted in 200 components = 0.0103241 Jy ! Clean residual min=-0.003604 max=0.003371 Jy/beam ! Clean residual mean=-0.000033 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 1.0464 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399547 Jy ! Component: 100 - total flux cleaned = 0.000764147 Jy ! Component: 150 - total flux cleaned = 0.00103918 Jy ! Component: 200 - total flux cleaned = 0.00134177 Jy ! Total flux subtracted in 200 components = 0.00134177 Jy ! Clean residual min=-0.003430 max=0.003160 Jy/beam ! Clean residual mean=-0.000033 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 1.04774 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 190 components and 1.04774 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.997 mas, bmaj=1.136 mas, bpa=-2.992 degrees ! Estimated noise=1.19325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120621 Jy ! Component: 100 - total flux cleaned = 0.000187629 Jy ! Component: 150 - total flux cleaned = 0.000185863 Jy ! Component: 200 - total flux cleaned = 0.00023662 Jy ! Total flux subtracted in 200 components = 0.00023662 Jy ! Clean residual min=-0.002641 max=0.002760 Jy/beam ! Clean residual mean=-0.000012 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 1.04797 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 205 components and 1.04797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062625Jy sigma=0.372572 ! Fit after self-cal, rms=0.062471Jy sigma=0.371534 wmodel J1419+5423_X_b_map.mod ! Writing 205 model components to file: J1419+5423_X_b_map.mod wobs J1419+5423_X_b_uvs.fits ! Writing UV FITS file: J1419+5423_X_b_uvs.fits wwins J1419+5423_X_b_map.win ! wwins: Wrote 8 windows to J1419+5423_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347902 Jy ! Component: 100 - total flux cleaned = 0.000440326 Jy ! Component: 150 - total flux cleaned = 0.000485302 Jy ! Component: 200 - total flux cleaned = 0.000441384 Jy ! Component: 250 - total flux cleaned = 0.00031789 Jy ! Component: 300 - total flux cleaned = 0.00035763 Jy ! Component: 350 - total flux cleaned = 0.000357713 Jy ! Component: 400 - total flux cleaned = 0.000395574 Jy ! Component: 450 - total flux cleaned = 0.000432082 Jy ! Component: 500 - total flux cleaned = 0.000468244 Jy ! Component: 550 - total flux cleaned = 0.000503784 Jy ! Component: 600 - total flux cleaned = 0.000573569 Jy ! Component: 650 - total flux cleaned = 0.000641915 Jy ! Component: 700 - total flux cleaned = 0.000573793 Jy ! Component: 750 - total flux cleaned = 0.000539896 Jy ! Component: 800 - total flux cleaned = 0.000442167 Jy ! Component: 850 - total flux cleaned = 0.000410212 Jy ! Component: 900 - total flux cleaned = 0.000378328 Jy ! Component: 950 - total flux cleaned = 0.000378393 Jy ! Component: 1000 - total flux cleaned = 0.000316608 Jy ! Component: 1050 - total flux cleaned = 0.000285698 Jy ! Component: 1100 - total flux cleaned = 0.000255815 Jy ! Component: 1150 - total flux cleaned = 0.000226219 Jy ! Component: 1200 - total flux cleaned = 0.000167575 Jy ! Component: 1250 - total flux cleaned = 0.000282868 Jy ! Component: 1300 - total flux cleaned = 0.000168519 Jy ! Component: 1350 - total flux cleaned = 0.000112119 Jy ! Component: 1400 - total flux cleaned = 0.000111993 Jy ! Component: 1450 - total flux cleaned = 0.000139899 Jy ! Component: 1500 - total flux cleaned = 0.000112321 Jy ! Component: 1550 - total flux cleaned = 8.51425e-05 Jy ! Component: 1600 - total flux cleaned = -4.91583e-05 Jy ! Component: 1650 - total flux cleaned = -7.50413e-05 Jy ! Component: 1700 - total flux cleaned = -7.48519e-05 Jy ! Component: 1750 - total flux cleaned = -0.000101192 Jy ! Component: 1800 - total flux cleaned = -0.000126829 Jy ! Component: 1850 - total flux cleaned = -0.000126892 Jy ! Component: 1900 - total flux cleaned = -0.000202642 Jy ! Component: 1950 - total flux cleaned = -0.000227291 Jy ! Component: 2000 - total flux cleaned = -0.000252005 Jy ! Component: 2050 - total flux cleaned = -0.000227629 Jy ! Component: 2100 - total flux cleaned = -0.000300698 Jy ! Component: 2150 - total flux cleaned = -0.000276732 Jy ! Component: 2200 - total flux cleaned = -0.000157329 Jy ! Component: 2250 - total flux cleaned = -0.000299512 Jy ! Component: 2300 - total flux cleaned = -0.000322663 Jy ! Component: 2350 - total flux cleaned = -0.000229768 Jy ! Component: 2400 - total flux cleaned = -0.000275927 Jy ! Component: 2450 - total flux cleaned = -0.000298626 Jy ! Component: 2500 - total flux cleaned = -0.000275855 Jy ! Component: 2550 - total flux cleaned = -0.000320943 Jy ! Component: 2600 - total flux cleaned = -0.00032119 Jy ! Component: 2650 - total flux cleaned = -0.000299259 Jy ! Component: 2700 - total flux cleaned = -0.000387031 Jy ! Component: 2750 - total flux cleaned = -0.000408961 Jy ! Component: 2800 - total flux cleaned = -0.000430853 Jy ! Component: 2850 - total flux cleaned = -0.000430937 Jy ! Component: 2900 - total flux cleaned = -0.000494804 Jy ! Component: 2950 - total flux cleaned = -0.000494585 Jy ! Component: 3000 - total flux cleaned = -0.000494748 Jy ! Component: 3050 - total flux cleaned = -0.000536436 Jy ! Component: 3100 - total flux cleaned = -0.000536346 Jy ! Component: 3150 - total flux cleaned = -0.000598133 Jy ! Component: 3200 - total flux cleaned = -0.000618434 Jy ! Component: 3250 - total flux cleaned = -0.000578039 Jy ! Component: 3300 - total flux cleaned = -0.000658756 Jy ! Component: 3350 - total flux cleaned = -0.000598686 Jy ! Component: 3400 - total flux cleaned = -0.000658458 Jy ! Component: 3450 - total flux cleaned = -0.000678266 Jy ! Component: 3500 - total flux cleaned = -0.000658813 Jy ! Component: 3550 - total flux cleaned = -0.000678265 Jy ! Component: 3600 - total flux cleaned = -0.000717166 Jy ! Component: 3650 - total flux cleaned = -0.000774855 Jy ! Component: 3700 - total flux cleaned = -0.000755693 Jy ! Component: 3750 - total flux cleaned = -0.000755505 Jy ! Component: 3800 - total flux cleaned = -0.00081195 Jy ! Component: 3850 - total flux cleaned = -0.00077459 Jy ! Component: 3900 - total flux cleaned = -0.000867309 Jy ! Component: 3950 - total flux cleaned = -0.000885819 Jy ! Component: 4000 - total flux cleaned = -0.00094068 Jy ! Component: 4050 - total flux cleaned = -0.000904241 Jy ! Total flux subtracted in 4096 components = -0.000922418 Jy ! Clean residual min=-0.001117 max=0.000956 Jy/beam ! Clean residual mean=-0.000005 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 1.04705 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 524 components and 1.04705 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1419+5423_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.997 x 1.136 at -2.992 degrees (North through East) ! Clean map min=-0.0019197 max=0.60352 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1419+5423_X_b_map.fits wmodel /image_prod/ug002_uva//J1419+5423_X_b_map.mod ! Writing 524 model components to file: /image_prod/ug002_uva//J1419+5423_X_b_map.mod wobs /image_prod/ug002_uva//J1419+5423_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1419+5423_X_b_uvs.fits wwins /image_prod/ug002_uva//J1419+5423_X_b_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1419+5423_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.603515 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000305916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152067 0.152067 0.304134 0.608269 1.21654 2.43308 4.86615 9.7323 19.4646 38.9292 77.8584 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.603 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1972.81 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1419+5423_X_b_dfm.log closed on Thu Mar 5 01:41:04 2020