! Started logfile: /image_prod/ug002_uva//J1416-1705_S_dfm.log on Thu Mar  5 01:40:16 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1416-1705_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1416-1705_S_uva.fits
! AN table 1: 40 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.971429 visibilities/baseline/integration-bin.
! Found source: J1416-1705
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3264 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1416-1705_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000121Jy  sigma=6.738503
! Fit after  self-cal, rms=0.758107Jy  sigma=5.204173
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.85 mas, bmaj=13.84 mas, bpa=-18.33 degrees
! Estimated noise=2.29779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186666 Jy
! Component: 100  -  total flux cleaned = 0.229479 Jy
! Total flux subtracted in 100 components = 0.229479 Jy
! Clean residual min=-0.012316 max=0.019640 Jy/beam
! Clean residual mean=0.000028 rms=0.003769 Jy/beam
! Combined flux in latest and established models = 0.229479 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.229479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103232Jy  sigma=0.547679
! Fit after  self-cal, rms=0.103227Jy  sigma=0.547629
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.333 mas, bmaj=14.04 mas, bpa=-17.25 degrees
! Estimated noise=1.91425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199914 Jy
! Component: 100  -  total flux cleaned = 0.0255632 Jy
! Component: 150  -  total flux cleaned = 0.0256153 Jy
! Component: 200  -  total flux cleaned = 0.0249901 Jy
! Total flux subtracted in 200 components = 0.0249901 Jy
! Clean residual min=-0.010467 max=0.013327 Jy/beam
! Clean residual mean=0.000002 rms=0.003120 Jy/beam
! Combined flux in latest and established models = 0.25447 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 27 components and 0.25447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097427Jy  sigma=0.512842
! Fit after  self-cal, rms=0.097421Jy  sigma=0.512711
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.333 x 14.04 at -17.25 degrees (North through East)
! Clean map  min=-0.010194  max=0.23984 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.95     HN        1.10     KP        1.01     
!   LA        1.03     MK        1.03     NL        1.09     OV        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.90     HN        1.10     KP        1.00     
!   LA        1.00     MK        1.04     NL        1.16     OV        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.74     FD        0.94     HN        1.02     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.13     OV        0.98     
! 
! 
! Fit before self-cal, rms=0.097421Jy  sigma=0.512711
! Fit after  self-cal, rms=0.085871Jy  sigma=0.480759
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=13.66 mas, bpa=-17.15 degrees
! Estimated noise=1.89533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00676576 Jy
! Component: 100  -  total flux cleaned = -0.00655348 Jy
! Component: 150  -  total flux cleaned = -0.00684945 Jy
! Component: 200  -  total flux cleaned = -0.00708223 Jy
! Total flux subtracted in 200 components = -0.00708223 Jy
! Clean residual min=-0.006894 max=0.008152 Jy/beam
! Clean residual mean=-0.000015 rms=0.002026 Jy/beam
! Combined flux in latest and established models = 0.247387 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.247387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084855Jy  sigma=0.475486
! Fit after  self-cal, rms=0.084896Jy  sigma=0.475278
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084896Jy  sigma=0.475278
! Fit after  self-cal, rms=0.085410Jy  sigma=0.457061
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.417 mas, bmaj=13.75 mas, bpa=-17.44 degrees
! Estimated noise=1.89236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231866 Jy
! Component: 100  -  total flux cleaned = 0.00240222 Jy
! Component: 150  -  total flux cleaned = 0.0022733 Jy
! Component: 200  -  total flux cleaned = 0.00221654 Jy
! Total flux subtracted in 200 components = 0.00221654 Jy
! Clean residual min=-0.003848 max=0.005819 Jy/beam
! Clean residual mean=-0.000012 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.249604 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 0.249604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085249Jy  sigma=0.456083
! Fit after  self-cal, rms=0.085340Jy  sigma=0.456003
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0052711 Jy
! Component: 100  -  total flux cleaned = 0.00743984 Jy
! Component: 150  -  total flux cleaned = 0.00822395 Jy
! Component: 200  -  total flux cleaned = 0.00928445 Jy
! Total flux subtracted in 200 components = 0.00928445 Jy
! Clean residual min=-0.003147 max=0.002953 Jy/beam
! Clean residual mean=-0.000007 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.258888 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 91 components and 0.258888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084929Jy  sigma=0.453063
! Fit after  self-cal, rms=0.084905Jy  sigma=0.452989
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084905Jy  sigma=0.452989
! Fit after  self-cal, rms=0.085314Jy  sigma=0.452751
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.418 mas, bmaj=13.76 mas, bpa=-17.4 degrees
! Estimated noise=1.89137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185424 Jy
! Component: 100  -  total flux cleaned = 0.00272664 Jy
! Component: 150  -  total flux cleaned = 0.00314296 Jy
! Component: 200  -  total flux cleaned = 0.00341456 Jy
! Total flux subtracted in 200 components = 0.00341456 Jy
! Clean residual min=-0.002865 max=0.002725 Jy/beam
! Clean residual mean=-0.000006 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.262303 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.262303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085195Jy  sigma=0.452138
! Fit after  self-cal, rms=0.085197Jy  sigma=0.452131
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314751 Jy
! Component: 100  -  total flux cleaned = 0.000655023 Jy
! Component: 150  -  total flux cleaned = 0.00088273 Jy
! Component: 200  -  total flux cleaned = 0.00105593 Jy
! Total flux subtracted in 200 components = 0.00105593 Jy
! Clean residual min=-0.002792 max=0.002647 Jy/beam
! Clean residual mean=-0.000006 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.263359 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.263359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085122Jy  sigma=0.451879
! Fit after  self-cal, rms=0.085116Jy  sigma=0.451875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085116Jy  sigma=0.451875
! Fit after  self-cal, rms=0.085448Jy  sigma=0.451814
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.647 mas, bmaj=17.41 mas, bpa=-5.647 degrees
! Estimated noise=2.26094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125707 Jy
! Component: 100  -  total flux cleaned = 0.00227662 Jy
! Component: 150  -  total flux cleaned = 0.00288245 Jy
! Component: 200  -  total flux cleaned = 0.00326835 Jy
! Total flux subtracted in 200 components = 0.00326835 Jy
! Clean residual min=-0.002984 max=0.003401 Jy/beam
! Clean residual mean=-0.000007 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.266627 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 143 components and 0.266627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085427Jy  sigma=0.451653
! Fit after  self-cal, rms=0.085431Jy  sigma=0.451648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000343482 Jy
! Component: 100  -  total flux cleaned = 0.000598963 Jy
! Component: 150  -  total flux cleaned = 0.000784712 Jy
! Component: 200  -  total flux cleaned = 0.000910259 Jy
! Total flux subtracted in 200 components = 0.000910259 Jy
! Clean residual min=-0.002958 max=0.003325 Jy/beam
! Clean residual mean=-0.000007 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.267537 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 152 components and 0.267537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085417Jy  sigma=0.451598
! Fit after  self-cal, rms=0.085416Jy  sigma=0.451596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=13.77 mas, bpa=-17.39 degrees
! Estimated noise=1.89303 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.416 x 13.77 at -17.39 degrees (North through East)
! Clean map  min=-0.0026266  max=0.2385 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.918 mas, bmaj=13.6 mas, bpa=-18.43 degrees
! Estimated noise=2.29115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186103 Jy
! Component: 100  -  total flux cleaned = 0.226964 Jy
! Component: 150  -  total flux cleaned = 0.240492 Jy
! Component: 200  -  total flux cleaned = 0.247185 Jy
! Total flux subtracted in 200 components = 0.247185 Jy
! Clean residual min=-0.004805 max=0.004171 Jy/beam
! Clean residual mean=-0.000003 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.247185 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.247185 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=13.77 mas, bpa=-17.39 degrees
! Estimated noise=1.89303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00553225 Jy
! Component: 100  -  total flux cleaned = 0.00843882 Jy
! Component: 150  -  total flux cleaned = 0.010996 Jy
! Component: 200  -  total flux cleaned = 0.013011 Jy
! Total flux subtracted in 200 components = 0.013011 Jy
! Clean residual min=-0.003486 max=0.003099 Jy/beam
! Clean residual mean=-0.000004 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.260196 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 46 components and 0.260196 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.647 mas, bmaj=17.41 mas, bpa=-5.647 degrees
! Estimated noise=2.26094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034691 Jy
! Component: 100  -  total flux cleaned = 0.00566203 Jy
! Component: 150  -  total flux cleaned = 0.00651279 Jy
! Component: 200  -  total flux cleaned = 0.00669064 Jy
! Total flux subtracted in 200 components = 0.00669064 Jy
! Clean residual min=-0.003355 max=0.003163 Jy/beam
! Clean residual mean=-0.000007 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.266887 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.92464e-05 Jy
! Component: 100  -  total flux cleaned = -4.13566e-06 Jy
! Component: 150  -  total flux cleaned = 3.70615e-05 Jy
! Component: 200  -  total flux cleaned = 0.000117234 Jy
! Total flux subtracted in 200 components = 0.000117234 Jy
! Clean residual min=-0.003244 max=0.003078 Jy/beam
! Clean residual mean=-0.000007 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.267004 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 104 components and 0.267004 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=13.77 mas, bpa=-17.39 degrees
! Estimated noise=1.89303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00046442 Jy
! Component: 100  -  total flux cleaned = -0.000402966 Jy
! Component: 150  -  total flux cleaned = -0.000178243 Jy
! Component: 200  -  total flux cleaned = -0.000125514 Jy
! Total flux subtracted in 200 components = -0.000125514 Jy
! Clean residual min=-0.002802 max=0.002723 Jy/beam
! Clean residual mean=-0.000004 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.266878 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 125 components and 0.266878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085471Jy  sigma=0.452075
! Fit after  self-cal, rms=0.085461Jy  sigma=0.452027
wmodel J1416-1705_S_map.mod
! Writing 125 model components to file: J1416-1705_S_map.mod
wobs   J1416-1705_S_uvs.fits
! Writing UV FITS file: J1416-1705_S_uvs.fits
wwins  J1416-1705_S_map.win
! wwins: Wrote 2 windows to J1416-1705_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000673485 Jy
! Component: 100  -  total flux cleaned = -0.00108878 Jy
! Component: 150  -  total flux cleaned = -0.00147328 Jy
! Component: 200  -  total flux cleaned = -0.00175632 Jy
! Component: 250  -  total flux cleaned = -0.00206571 Jy
! Component: 300  -  total flux cleaned = -0.00228779 Jy
! Component: 350  -  total flux cleaned = -0.00260597 Jy
! Component: 400  -  total flux cleaned = -0.00284352 Jy
! Component: 450  -  total flux cleaned = -0.00307205 Jy
! Component: 500  -  total flux cleaned = -0.00332477 Jy
! Component: 550  -  total flux cleaned = -0.00347904 Jy
! Component: 600  -  total flux cleaned = -0.00356877 Jy
! Component: 650  -  total flux cleaned = -0.00374333 Jy
! Component: 700  -  total flux cleaned = -0.00385708 Jy
! Component: 750  -  total flux cleaned = -0.0040786 Jy
! Component: 800  -  total flux cleaned = -0.00415961 Jy
! Component: 850  -  total flux cleaned = -0.00434541 Jy
! Component: 900  -  total flux cleaned = -0.00442334 Jy
! Component: 950  -  total flux cleaned = -0.00460191 Jy
! Component: 1000  -  total flux cleaned = -0.00480186 Jy
! Component: 1050  -  total flux cleaned = -0.00502147 Jy
! Component: 1100  -  total flux cleaned = -0.00516491 Jy
! Component: 1150  -  total flux cleaned = -0.00530665 Jy
! Component: 1200  -  total flux cleaned = -0.00544596 Jy
! Component: 1250  -  total flux cleaned = -0.0056281 Jy
! Component: 1300  -  total flux cleaned = -0.00573956 Jy
! Component: 1350  -  total flux cleaned = -0.00584947 Jy
! Component: 1400  -  total flux cleaned = -0.00597865 Jy
! Component: 1450  -  total flux cleaned = -0.00610594 Jy
! Component: 1500  -  total flux cleaned = -0.00621069 Jy
! Component: 1550  -  total flux cleaned = -0.00633467 Jy
! Component: 1600  -  total flux cleaned = -0.00637529 Jy
! Component: 1650  -  total flux cleaned = -0.00651551 Jy
! Component: 1700  -  total flux cleaned = -0.00649568 Jy
! Component: 1750  -  total flux cleaned = -0.00657385 Jy
! Component: 1800  -  total flux cleaned = -0.00663174 Jy
! Component: 1850  -  total flux cleaned = -0.0066886 Jy
! Component: 1900  -  total flux cleaned = -0.00680022 Jy
! Component: 1950  -  total flux cleaned = -0.00678157 Jy
! Component: 2000  -  total flux cleaned = -0.0068724 Jy
! Component: 2050  -  total flux cleaned = -0.00690839 Jy
! Component: 2100  -  total flux cleaned = -0.00690862 Jy
! Component: 2150  -  total flux cleaned = -0.00699639 Jy
! Component: 2200  -  total flux cleaned = -0.0070652 Jy
! Component: 2250  -  total flux cleaned = -0.00706503 Jy
! Component: 2300  -  total flux cleaned = -0.0070649 Jy
! Component: 2350  -  total flux cleaned = -0.00706494 Jy
! Component: 2400  -  total flux cleaned = -0.00704823 Jy
! Component: 2450  -  total flux cleaned = -0.00704829 Jy
! Component: 2500  -  total flux cleaned = -0.00708056 Jy
! Component: 2550  -  total flux cleaned = -0.0070966 Jy
! Component: 2600  -  total flux cleaned = -0.00711241 Jy
! Component: 2650  -  total flux cleaned = -0.00708097 Jy
! Component: 2700  -  total flux cleaned = -0.0070655 Jy
! Component: 2750  -  total flux cleaned = -0.00705004 Jy
! Component: 2800  -  total flux cleaned = -0.00708066 Jy
! Component: 2850  -  total flux cleaned = -0.00705044 Jy
! Component: 2900  -  total flux cleaned = -0.00703531 Jy
! Component: 2950  -  total flux cleaned = -0.00696075 Jy
! Component: 3000  -  total flux cleaned = -0.00694601 Jy
! Component: 3050  -  total flux cleaned = -0.00694613 Jy
! Component: 3100  -  total flux cleaned = -0.00693155 Jy
! Component: 3150  -  total flux cleaned = -0.00690255 Jy
! Component: 3200  -  total flux cleaned = -0.00691687 Jy
! Component: 3250  -  total flux cleaned = -0.00684532 Jy
! Component: 3300  -  total flux cleaned = -0.00684527 Jy
! Component: 3350  -  total flux cleaned = -0.00674657 Jy
! Component: 3400  -  total flux cleaned = -0.00674657 Jy
! Component: 3450  -  total flux cleaned = -0.00669121 Jy
! Component: 3500  -  total flux cleaned = -0.00664992 Jy
! Component: 3550  -  total flux cleaned = -0.00660883 Jy
! Component: 3600  -  total flux cleaned = -0.00655448 Jy
! Component: 3650  -  total flux cleaned = -0.00652756 Jy
! Component: 3700  -  total flux cleaned = -0.00650062 Jy
! Component: 3750  -  total flux cleaned = -0.00648728 Jy
! Component: 3800  -  total flux cleaned = -0.0064607 Jy
! Component: 3850  -  total flux cleaned = -0.00642107 Jy
! Component: 3900  -  total flux cleaned = -0.00636862 Jy
! Component: 3950  -  total flux cleaned = -0.00631647 Jy
! Component: 4000  -  total flux cleaned = -0.0062778 Jy
! Component: 4050  -  total flux cleaned = -0.00625216 Jy
! Total flux subtracted in 4096 components = -0.00621387 Jy
! Clean residual min=-0.000660 max=0.000790 Jy/beam
! Clean residual mean=0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.260665 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 398 components and 0.260665 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1416-1705_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.416 x 13.77 at -17.39 degrees (North through East)
! Clean map  min=-0.0016211  max=0.23825 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1416-1705_S_map.fits
wmodel /image_prod/ug002_uva//J1416-1705_S_map.mod
! Writing 398 model components to file: /image_prod/ug002_uva//J1416-1705_S_map.mod
wobs   /image_prod/ug002_uva//J1416-1705_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1416-1705_S_uvs.fits
wwins  /image_prod/ug002_uva//J1416-1705_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1416-1705_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.238252 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000227408 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.286346 0.286346 0.572691 1.14538 2.29077 4.58153 9.16306 18.3261 36.6523 73.3045
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.238 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1047.68 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1416-1705_S_dfm.log closed on Thu Mar  5 01:40:20 2020