! Started logfile: /image_prod/ug002_uva//J1402-1825_S_dfm.log on Thu Mar 5 01:34:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1402-1825_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1402-1825_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.994907 visibilities/baseline/integration-bin. ! Found source: J1402-1825 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 6447 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1402-1825_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004118Jy sigma=7.523095 ! Fit after self-cal, rms=0.914341Jy sigma=6.832527 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=17.47 mas, bpa=-12.52 degrees ! Estimated noise=1.77711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698084 Jy ! Component: 100 - total flux cleaned = 0.0873392 Jy ! Total flux subtracted in 100 components = 0.0873392 Jy ! Clean residual min=-0.003773 max=0.007173 Jy/beam ! Clean residual mean=-0.000019 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.0873392 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0873392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068709Jy sigma=0.469639 ! Fit after self-cal, rms=0.068676Jy sigma=0.469226 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=18.6 mas, bpa=-12.31 degrees ! Estimated noise=1.28239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666082 Jy ! Component: 100 - total flux cleaned = 0.00936241 Jy ! Component: 150 - total flux cleaned = 0.0102024 Jy ! Component: 200 - total flux cleaned = 0.0105903 Jy ! Total flux subtracted in 200 components = 0.0105903 Jy ! Clean residual min=-0.002912 max=0.004094 Jy/beam ! Clean residual mean=-0.000002 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.0979295 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 0.0979295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068140Jy sigma=0.464320 ! Fit after self-cal, rms=0.068149Jy sigma=0.464261 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.085 x 18.6 at -12.31 degrees (North through East) ! Clean map min=-0.0027867 max=0.089211 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.93 HN 1.08 KP 0.98 ! LA 1.05 MK 1.03 NL 0.95 OV 0.93 ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.97 HN 1.08 KP 1.03 ! LA 1.04 MK 0.97 NL 0.92 OV 0.96 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.98 KP 1.03 ! LA 1.05 MK 1.01 NL 0.88 OV 0.93 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.068149Jy sigma=0.464261 ! Fit after self-cal, rms=0.071448Jy sigma=0.460705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.094 mas, bmaj=19.15 mas, bpa=-12.46 degrees ! Estimated noise=1.28375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123081 Jy ! Component: 100 - total flux cleaned = -0.00140236 Jy ! Component: 150 - total flux cleaned = -0.00155846 Jy ! Component: 200 - total flux cleaned = -0.00163176 Jy ! Total flux subtracted in 200 components = -0.00163176 Jy ! Clean residual min=-0.002051 max=0.002687 Jy/beam ! Clean residual mean=-0.000007 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0962977 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0962977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071425Jy sigma=0.460492 ! Fit after self-cal, rms=0.071503Jy sigma=0.460374 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071503Jy sigma=0.460374 ! Fit after self-cal, rms=0.073409Jy sigma=0.459536 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=19.35 mas, bpa=-12.51 degrees ! Estimated noise=1.28383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367514 Jy ! Component: 100 - total flux cleaned = -0.000385996 Jy ! Component: 150 - total flux cleaned = -0.000401061 Jy ! Component: 200 - total flux cleaned = -0.000414104 Jy ! Total flux subtracted in 200 components = -0.000414104 Jy ! Clean residual min=-0.001982 max=0.002293 Jy/beam ! Clean residual mean=-0.000008 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0958836 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 67 components and 0.0958836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073402Jy sigma=0.459479 ! Fit after self-cal, rms=0.073420Jy sigma=0.459451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.48036e-05 Jy ! Component: 100 - total flux cleaned = -1.47355e-05 Jy ! Component: 150 - total flux cleaned = -1.48328e-05 Jy ! Component: 200 - total flux cleaned = 3.4503e-06 Jy ! Total flux subtracted in 200 components = 3.4503e-06 Jy ! Clean residual min=-0.001955 max=0.002309 Jy/beam ! Clean residual mean=-0.000008 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0958871 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.0958871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073416Jy sigma=0.459433 ! Fit after self-cal, rms=0.073415Jy sigma=0.459432 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073415Jy sigma=0.459432 ! Fit after self-cal, rms=0.073917Jy sigma=0.459414 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=19.43 mas, bpa=-12.54 degrees ! Estimated noise=1.28431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283393 Jy ! Component: 100 - total flux cleaned = -0.000308853 Jy ! Component: 150 - total flux cleaned = -0.000342586 Jy ! Component: 200 - total flux cleaned = -0.000352621 Jy ! Total flux subtracted in 200 components = -0.000352621 Jy ! Clean residual min=-0.001955 max=0.002334 Jy/beam ! Clean residual mean=-0.000008 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0955345 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.0955345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073913Jy sigma=0.459381 ! Fit after self-cal, rms=0.073915Jy sigma=0.459381 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.39513e-06 Jy ! Component: 100 - total flux cleaned = 7.36172e-06 Jy ! Component: 150 - total flux cleaned = -9.05017e-07 Jy ! Component: 200 - total flux cleaned = 7.04299e-06 Jy ! Total flux subtracted in 200 components = 7.04299e-06 Jy ! Clean residual min=-0.001944 max=0.002331 Jy/beam ! Clean residual mean=-0.000008 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0955415 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.0955415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073913Jy sigma=0.459368 ! Fit after self-cal, rms=0.073911Jy sigma=0.459367 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073911Jy sigma=0.459367 ! Fit after self-cal, rms=0.074273Jy sigma=0.459357 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.399 mas, bmaj=21.56 mas, bpa=-6.065 degrees ! Estimated noise=1.43065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144367 Jy ! Component: 100 - total flux cleaned = -0.000153461 Jy ! Component: 150 - total flux cleaned = -0.000153132 Jy ! Component: 200 - total flux cleaned = -0.000146802 Jy ! Total flux subtracted in 200 components = -0.000146802 Jy ! Clean residual min=-0.002291 max=0.002487 Jy/beam ! Clean residual mean=-0.000013 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0953947 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.0953947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074271Jy sigma=0.459343 ! Fit after self-cal, rms=0.074273Jy sigma=0.459340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.55499e-05 Jy ! Component: 100 - total flux cleaned = 3.89298e-05 Jy ! Component: 150 - total flux cleaned = 4.49263e-05 Jy ! Component: 200 - total flux cleaned = 5.0553e-05 Jy ! Total flux subtracted in 200 components = 5.0553e-05 Jy ! Clean residual min=-0.002290 max=0.002487 Jy/beam ! Clean residual mean=-0.000013 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0954452 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 101 components and 0.0954452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074272Jy sigma=0.459337 ! Fit after self-cal, rms=0.074272Jy sigma=0.459336 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=19.5 mas, bpa=-12.56 degrees ! Estimated noise=1.28432 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.092 x 19.5 at -12.56 degrees (North through East) ! Clean map min=-0.0018775 max=0.089508 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=18.25 mas, bpa=-12.71 degrees ! Estimated noise=1.78757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702035 Jy ! Component: 100 - total flux cleaned = 0.0864448 Jy ! Component: 150 - total flux cleaned = 0.0919801 Jy ! Component: 200 - total flux cleaned = 0.094341 Jy ! Total flux subtracted in 200 components = 0.094341 Jy ! Clean residual min=-0.002923 max=0.002861 Jy/beam ! Clean residual mean=-0.000005 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.094341 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.094341 Jy ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=19.5 mas, bpa=-12.56 degrees ! Estimated noise=1.28432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132224 Jy ! Component: 100 - total flux cleaned = 0.00164431 Jy ! Component: 150 - total flux cleaned = 0.00166648 Jy ! Component: 200 - total flux cleaned = 0.00164998 Jy ! Total flux subtracted in 200 components = 0.00164998 Jy ! Clean residual min=-0.001906 max=0.002332 Jy/beam ! Clean residual mean=-0.000006 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.095991 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.095991 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.399 mas, bmaj=21.56 mas, bpa=-6.065 degrees ! Estimated noise=1.43065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.93761e-05 Jy ! Component: 100 - total flux cleaned = -5.67516e-05 Jy ! Component: 150 - total flux cleaned = -6.7962e-05 Jy ! Component: 200 - total flux cleaned = -9.51082e-05 Jy ! Total flux subtracted in 200 components = -9.51082e-05 Jy ! Clean residual min=-0.002288 max=0.002483 Jy/beam ! Clean residual mean=-0.000011 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0958959 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19593e-07 Jy ! Component: 100 - total flux cleaned = -7.59215e-07 Jy ! Component: 150 - total flux cleaned = -8.05017e-06 Jy ! Component: 200 - total flux cleaned = -7.8503e-06 Jy ! Total flux subtracted in 200 components = -7.8503e-06 Jy ! Clean residual min=-0.002283 max=0.002488 Jy/beam ! Clean residual mean=-0.000011 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.095888 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.0958881 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=19.5 mas, bpa=-12.56 degrees ! Estimated noise=1.28432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.7961e-05 Jy ! Component: 100 - total flux cleaned = 6.97638e-06 Jy ! Component: 150 - total flux cleaned = -1.56056e-05 Jy ! Component: 200 - total flux cleaned = -2.62829e-05 Jy ! Total flux subtracted in 200 components = -2.62829e-05 Jy ! Clean residual min=-0.001891 max=0.002337 Jy/beam ! Clean residual mean=-0.000006 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0958618 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.0958618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074277Jy sigma=0.459330 ! Fit after self-cal, rms=0.074266Jy sigma=0.459320 wmodel J1402-1825_S_map.mod ! Writing 69 model components to file: J1402-1825_S_map.mod wobs J1402-1825_S_uvs.fits ! Writing UV FITS file: J1402-1825_S_uvs.fits wwins J1402-1825_S_map.win ! wwins: Wrote 1 windows to J1402-1825_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103547 Jy ! Component: 100 - total flux cleaned = 0.00133039 Jy ! Component: 150 - total flux cleaned = 0.00142999 Jy ! Component: 200 - total flux cleaned = 0.00146102 Jy ! Component: 250 - total flux cleaned = 0.00149018 Jy ! Component: 300 - total flux cleaned = 0.00154657 Jy ! Component: 350 - total flux cleaned = 0.00149314 Jy ! Component: 400 - total flux cleaned = 0.00146886 Jy ! Component: 450 - total flux cleaned = 0.00141987 Jy ! Component: 500 - total flux cleaned = 0.00137216 Jy ! Component: 550 - total flux cleaned = 0.00125586 Jy ! Component: 600 - total flux cleaned = 0.00107497 Jy ! Component: 650 - total flux cleaned = 0.00094303 Jy ! Component: 700 - total flux cleaned = 0.000814181 Jy ! Component: 750 - total flux cleaned = 0.000772196 Jy ! Component: 800 - total flux cleaned = 0.000731718 Jy ! Component: 850 - total flux cleaned = 0.000712399 Jy ! Component: 900 - total flux cleaned = 0.000673883 Jy ! Component: 950 - total flux cleaned = 0.000655176 Jy ! Component: 1000 - total flux cleaned = 0.000711222 Jy ! Component: 1050 - total flux cleaned = 0.000765809 Jy ! Component: 1100 - total flux cleaned = 0.000801512 Jy ! Component: 1150 - total flux cleaned = 0.000818793 Jy ! Component: 1200 - total flux cleaned = 0.000853502 Jy ! Component: 1250 - total flux cleaned = 0.000887436 Jy ! Component: 1300 - total flux cleaned = 0.000904161 Jy ! Component: 1350 - total flux cleaned = 0.00093744 Jy ! Component: 1400 - total flux cleaned = 0.0010345 Jy ! Component: 1450 - total flux cleaned = 0.00105047 Jy ! Component: 1500 - total flux cleaned = 0.00103511 Jy ! Component: 1550 - total flux cleaned = 0.00109733 Jy ! Component: 1600 - total flux cleaned = 0.00112789 Jy ! Component: 1650 - total flux cleaned = 0.00115771 Jy ! Component: 1700 - total flux cleaned = 0.0011724 Jy ! Component: 1750 - total flux cleaned = 0.0011432 Jy ! Component: 1800 - total flux cleaned = 0.00115769 Jy ! Component: 1850 - total flux cleaned = 0.00115768 Jy ! Component: 1900 - total flux cleaned = 0.00115754 Jy ! Component: 1950 - total flux cleaned = 0.00117116 Jy ! Component: 2000 - total flux cleaned = 0.00118489 Jy ! Component: 2050 - total flux cleaned = 0.0011983 Jy ! Component: 2100 - total flux cleaned = 0.00117122 Jy ! Component: 2150 - total flux cleaned = 0.00114474 Jy ! Component: 2200 - total flux cleaned = 0.00115794 Jy ! Component: 2250 - total flux cleaned = 0.00115807 Jy ! Component: 2300 - total flux cleaned = 0.00115815 Jy ! Component: 2350 - total flux cleaned = 0.00113281 Jy ! Component: 2400 - total flux cleaned = 0.00114543 Jy ! Component: 2450 - total flux cleaned = 0.00110796 Jy ! Component: 2500 - total flux cleaned = 0.00109554 Jy ! Component: 2550 - total flux cleaned = 0.00105888 Jy ! Component: 2600 - total flux cleaned = 0.001071 Jy ! Component: 2650 - total flux cleaned = 0.00104706 Jy ! Component: 2700 - total flux cleaned = 0.0010115 Jy ! Component: 2750 - total flux cleaned = 0.000976275 Jy ! Component: 2800 - total flux cleaned = 0.000941488 Jy ! Component: 2850 - total flux cleaned = 0.000930032 Jy ! Component: 2900 - total flux cleaned = 0.000918421 Jy ! Component: 2950 - total flux cleaned = 0.000850276 Jy ! Component: 3000 - total flux cleaned = 0.000816541 Jy ! Component: 3050 - total flux cleaned = 0.000805355 Jy ! Component: 3100 - total flux cleaned = 0.000805372 Jy ! Component: 3150 - total flux cleaned = 0.000772347 Jy ! Component: 3200 - total flux cleaned = 0.000750486 Jy ! Component: 3250 - total flux cleaned = 0.000707046 Jy ! Component: 3300 - total flux cleaned = 0.00070709 Jy ! Component: 3350 - total flux cleaned = 0.000685706 Jy ! Component: 3400 - total flux cleaned = 0.000664393 Jy ! Component: 3450 - total flux cleaned = 0.000643266 Jy ! Component: 3500 - total flux cleaned = 0.00062239 Jy ! Component: 3550 - total flux cleaned = 0.000591144 Jy ! Component: 3600 - total flux cleaned = 0.000570507 Jy ! Component: 3650 - total flux cleaned = 0.000570614 Jy ! Component: 3700 - total flux cleaned = 0.000550096 Jy ! Component: 3750 - total flux cleaned = 0.000539948 Jy ! Component: 3800 - total flux cleaned = 0.00051981 Jy ! Component: 3850 - total flux cleaned = 0.000509808 Jy ! Component: 3900 - total flux cleaned = 0.000519848 Jy ! Component: 3950 - total flux cleaned = 0.000529773 Jy ! Component: 4000 - total flux cleaned = 0.000509973 Jy ! Component: 4050 - total flux cleaned = 0.000490298 Jy ! Total flux subtracted in 4096 components = 0.000480549 Jy ! Clean residual min=-0.000674 max=0.000556 Jy/beam ! Clean residual mean=-0.000003 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0963423 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 397 components and 0.0963423 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1402-1825_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.092 x 19.5 at -12.56 degrees (North through East) ! Clean map min=-0.001732 max=0.089833 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1402-1825_S_map.fits wmodel /image_prod/ug002_uva//J1402-1825_S_map.mod ! Writing 397 model components to file: /image_prod/ug002_uva//J1402-1825_S_map.mod wobs /image_prod/ug002_uva//J1402-1825_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1402-1825_S_uvs.fits wwins /image_prod/ug002_uva//J1402-1825_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1402-1825_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0898334 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.64388 0.64388 1.28776 2.57552 5.15104 10.3021 20.6042 41.2083 82.4166 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.089 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 465.925 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1402-1825_S_dfm.log closed on Thu Mar 5 01:34:40 2020