! Started logfile: /image_prod/ug002_uva//J1354-0206_S_b_dfm.log on Thu Mar  5 01:30:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1354-0206_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1354-0206_S_b_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.87037 visibilities/baseline/integration-bin.
! Found source: J1354-0206
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 564 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1354-0206_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.345769Jy  sigma=14.197895
! Fit after  self-cal, rms=0.160002Jy  sigma=1.737034
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.172 mas, bmaj=13.04 mas, bpa=-17.16 degrees
! Estimated noise=3.35037 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.674296 Jy
! Component: 100  -  total flux cleaned = 0.822156 Jy
! Total flux subtracted in 100 components = 0.822156 Jy
! Clean residual min=-0.025637 max=0.046855 Jy/beam
! Clean residual mean=0.000030 rms=0.009120 Jy/beam
! Combined flux in latest and established models = 0.822156 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.822156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105109Jy  sigma=1.046906
! Fit after  self-cal, rms=0.105116Jy  sigma=1.046789
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=13.44 mas, bpa=-16.19 degrees
! Estimated noise=3.0044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0459344 Jy
! Component: 100  -  total flux cleaned = 0.0671855 Jy
! Component: 150  -  total flux cleaned = 0.0800787 Jy
! Component: 200  -  total flux cleaned = 0.0845468 Jy
! Total flux subtracted in 200 components = 0.0845468 Jy
! Clean residual min=-0.016683 max=0.029964 Jy/beam
! Clean residual mean=0.000037 rms=0.005989 Jy/beam
! Combined flux in latest and established models = 0.906703 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 37 components and 0.906703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082992Jy  sigma=0.833109
! Fit after  self-cal, rms=0.082789Jy  sigma=0.831126
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.644 x 13.44 at -16.19 degrees (North through East)
! Clean map  min=-0.015099  max=0.8615 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.12     HN        0.98     KP        0.97     
!   LA        0.99     MK        1.01     NL        0.93     OV        0.97     
!   PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.16     HN        1.00     KP        0.96     
!   LA        1.00     MK        1.00     NL        1.05     OV        1.00     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.97     KP        0.98     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.082789Jy  sigma=0.831126
! Fit after  self-cal, rms=0.060443Jy  sigma=0.580217
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=13.41 mas, bpa=-16.27 degrees
! Estimated noise=2.98938 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567112 Jy
! Component: 100  -  total flux cleaned = 0.00615275 Jy
! Component: 150  -  total flux cleaned = 0.00635324 Jy
! Component: 200  -  total flux cleaned = 0.00654209 Jy
! Total flux subtracted in 200 components = 0.00654209 Jy
! Clean residual min=-0.006999 max=0.007310 Jy/beam
! Clean residual mean=0.000002 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 0.913245 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 51 components and 0.913245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059822Jy  sigma=0.573295
! Fit after  self-cal, rms=0.059777Jy  sigma=0.572782
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059777Jy  sigma=0.572782
! Fit after  self-cal, rms=0.059692Jy  sigma=0.571978
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.648 mas, bmaj=13.39 mas, bpa=-16.28 degrees
! Estimated noise=2.98965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288343 Jy
! Component: 100  -  total flux cleaned = 0.00342673 Jy
! Component: 150  -  total flux cleaned = 0.00382779 Jy
! Component: 200  -  total flux cleaned = 0.00425256 Jy
! Total flux subtracted in 200 components = 0.00425256 Jy
! Clean residual min=-0.006940 max=0.007429 Jy/beam
! Clean residual mean=0.000003 rms=0.001738 Jy/beam
! Combined flux in latest and established models = 0.917498 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 0.917498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059421Jy  sigma=0.569179
! Fit after  self-cal, rms=0.059407Jy  sigma=0.569001
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (126.5, 21.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00646496 Jy
! Component: 100  -  total flux cleaned = 0.00788048 Jy
! Component: 150  -  total flux cleaned = 0.00809429 Jy
! Component: 200  -  total flux cleaned = 0.00827824 Jy
! Total flux subtracted in 200 components = 0.00827824 Jy
! Clean residual min=-0.006051 max=0.005893 Jy/beam
! Clean residual mean=0.000006 rms=0.001514 Jy/beam
! Combined flux in latest and established models = 0.925776 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.925776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058611Jy  sigma=0.560896
! Fit after  self-cal, rms=0.058587Jy  sigma=0.560418
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058587Jy  sigma=0.560418
! Fit after  self-cal, rms=0.058444Jy  sigma=0.559386
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.645 mas, bmaj=13.38 mas, bpa=-16.29 degrees
! Estimated noise=2.98901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220081 Jy
! Component: 100  -  total flux cleaned = 0.00267106 Jy
! Component: 150  -  total flux cleaned = 0.00299 Jy
! Component: 200  -  total flux cleaned = 0.00313184 Jy
! Total flux subtracted in 200 components = 0.00313184 Jy
! Clean residual min=-0.005685 max=0.005333 Jy/beam
! Clean residual mean=0.000004 rms=0.001381 Jy/beam
! Combined flux in latest and established models = 0.928908 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.928908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058186Jy  sigma=0.556865
! Fit after  self-cal, rms=0.058175Jy  sigma=0.556706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.10704e-05 Jy
! Component: 100  -  total flux cleaned = 0.000199096 Jy
! Component: 150  -  total flux cleaned = 0.000443356 Jy
! Component: 200  -  total flux cleaned = 0.000501802 Jy
! Total flux subtracted in 200 components = 0.000501802 Jy
! Clean residual min=-0.005476 max=0.005120 Jy/beam
! Clean residual mean=0.000003 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.92941 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 100 components and 0.92941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058039Jy  sigma=0.555421
! Fit after  self-cal, rms=0.058032Jy  sigma=0.555345
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058032Jy  sigma=0.555345
! Fit after  self-cal, rms=0.058032Jy  sigma=0.555059
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.274 mas, bmaj=14.89 mas, bpa=-3.908 degrees
! Estimated noise=3.49449 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224411 Jy
! Component: 100  -  total flux cleaned = 0.00230469 Jy
! Component: 150  -  total flux cleaned = 0.00258631 Jy
! Component: 200  -  total flux cleaned = 0.00288278 Jy
! Total flux subtracted in 200 components = 0.00288278 Jy
! Clean residual min=-0.004744 max=0.004204 Jy/beam
! Clean residual mean=0.000005 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.932293 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 103 components and 0.932293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057989Jy  sigma=0.554472
! Fit after  self-cal, rms=0.057957Jy  sigma=0.554218
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153115 Jy
! Component: 100  -  total flux cleaned = 0.000109585 Jy
! Component: 150  -  total flux cleaned = 0.000192539 Jy
! Component: 200  -  total flux cleaned = 0.000271648 Jy
! Total flux subtracted in 200 components = 0.000271648 Jy
! Clean residual min=-0.004660 max=0.004098 Jy/beam
! Clean residual mean=0.000005 rms=0.001261 Jy/beam
! Combined flux in latest and established models = 0.932564 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 0.932564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057927Jy  sigma=0.553980
! Fit after  self-cal, rms=0.057914Jy  sigma=0.553883
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.643 mas, bmaj=13.37 mas, bpa=-16.29 degrees
! Estimated noise=2.99049 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.643 x 13.37 at -16.29 degrees (North through East)
! Clean map  min=-0.0050525  max=0.85722 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057914Jy  sigma=0.553883
! Fit after  self-cal, rms=0.054047Jy  sigma=0.516627
! Inverting map and beam 
! Estimated beam: bmin=3.647 mas, bmaj=13.36 mas, bpa=-16.27 degrees
! Estimated noise=2.99596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100134 Jy
! Component: 100  -  total flux cleaned = 0.00151798 Jy
! Component: 150  -  total flux cleaned = 0.00180267 Jy
! Component: 200  -  total flux cleaned = 0.0020577 Jy
! Total flux subtracted in 200 components = 0.0020577 Jy
! Clean residual min=-0.005194 max=0.004436 Jy/beam
! Clean residual mean=0.000004 rms=0.001174 Jy/beam
! Combined flux in latest and established models = 0.934622 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 119 components and 0.934622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053929Jy  sigma=0.515198
! Fit after  self-cal, rms=0.053929Jy  sigma=0.515172
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.14193e-05 Jy
! Component: 100  -  total flux cleaned = 0.000207449 Jy
! Component: 150  -  total flux cleaned = 0.000369073 Jy
! Component: 200  -  total flux cleaned = 0.000406832 Jy
! Total flux subtracted in 200 components = 0.000406832 Jy
! Clean residual min=-0.005127 max=0.004264 Jy/beam
! Clean residual mean=0.000004 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.935029 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 130 components and 0.935029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053878Jy  sigma=0.514531
! Fit after  self-cal, rms=0.053879Jy  sigma=0.514521
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053879Jy  sigma=0.514521
! Fit after  self-cal, rms=0.053861Jy  sigma=0.514300
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=12.92 mas, bpa=-17.28 degrees
! Estimated noise=3.32052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.668201 Jy
! Component: 100  -  total flux cleaned = 0.814505 Jy
! Component: 150  -  total flux cleaned = 0.859901 Jy
! Component: 200  -  total flux cleaned = 0.88318 Jy
! Total flux subtracted in 200 components = 0.88318 Jy
! Clean residual min=-0.009874 max=0.012389 Jy/beam
! Clean residual mean=0.000000 rms=0.003021 Jy/beam
! Combined flux in latest and established models = 0.88318 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.88318 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.645 mas, bmaj=13.35 mas, bpa=-16.27 degrees
! Estimated noise=2.99703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160849 Jy
! Component: 100  -  total flux cleaned = 0.0267423 Jy
! Component: 150  -  total flux cleaned = 0.0347497 Jy
! Component: 200  -  total flux cleaned = 0.0409084 Jy
! Total flux subtracted in 200 components = 0.0409084 Jy
! Clean residual min=-0.006369 max=0.005040 Jy/beam
! Clean residual mean=0.000003 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 0.924088 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 64 components and 0.924088 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.27 mas, bmaj=14.87 mas, bpa=-3.841 degrees
! Estimated noise=3.50155 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603882 Jy
! Component: 100  -  total flux cleaned = 0.00948922 Jy
! Component: 150  -  total flux cleaned = 0.0107191 Jy
! Component: 200  -  total flux cleaned = 0.0112185 Jy
! Total flux subtracted in 200 components = 0.0112185 Jy
! Clean residual min=-0.004574 max=0.003743 Jy/beam
! Clean residual mean=0.000007 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.935307 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000438576 Jy
! Component: 100  -  total flux cleaned = 0.000667568 Jy
! Component: 150  -  total flux cleaned = 0.000732962 Jy
! Component: 200  -  total flux cleaned = 0.000791003 Jy
! Total flux subtracted in 200 components = 0.000791003 Jy
! Clean residual min=-0.004229 max=0.003481 Jy/beam
! Clean residual mean=0.000007 rms=0.001174 Jy/beam
! Combined flux in latest and established models = 0.936098 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 144 components and 0.936098 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.645 mas, bmaj=13.35 mas, bpa=-16.27 degrees
! Estimated noise=2.99703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000761626 Jy
! Component: 100  -  total flux cleaned = 0.001312 Jy
! Component: 150  -  total flux cleaned = 0.00163335 Jy
! Component: 200  -  total flux cleaned = 0.00184758 Jy
! Total flux subtracted in 200 components = 0.00184758 Jy
! Clean residual min=-0.005035 max=0.004411 Jy/beam
! Clean residual mean=0.000005 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.937946 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 168 components and 0.937946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053840Jy  sigma=0.514564
! Fit after  self-cal, rms=0.053805Jy  sigma=0.514219
wmodel J1354-0206_S_b_map.mod
! Writing 168 model components to file: J1354-0206_S_b_map.mod
wobs   J1354-0206_S_b_uvs.fits
! Writing UV FITS file: J1354-0206_S_b_uvs.fits
wwins  J1354-0206_S_b_map.win
! wwins: Wrote 3 windows to J1354-0206_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000461174 Jy
! Component: 100  -  total flux cleaned = -0.000815408 Jy
! Component: 150  -  total flux cleaned = -0.0011356 Jy
! Component: 200  -  total flux cleaned = -0.0014949 Jy
! Component: 250  -  total flux cleaned = -0.00195303 Jy
! Component: 300  -  total flux cleaned = -0.00233312 Jy
! Component: 350  -  total flux cleaned = -0.00264335 Jy
! Component: 400  -  total flux cleaned = -0.00308912 Jy
! Component: 450  -  total flux cleaned = -0.00337423 Jy
! Component: 500  -  total flux cleaned = -0.0038338 Jy
! Component: 550  -  total flux cleaned = -0.00401152 Jy
! Component: 600  -  total flux cleaned = -0.00431444 Jy
! Component: 650  -  total flux cleaned = -0.00452341 Jy
! Component: 700  -  total flux cleaned = -0.00468637 Jy
! Component: 750  -  total flux cleaned = -0.00500306 Jy
! Component: 800  -  total flux cleaned = -0.00523377 Jy
! Component: 850  -  total flux cleaned = -0.00549512 Jy
! Component: 900  -  total flux cleaned = -0.00571342 Jy
! Component: 950  -  total flux cleaned = -0.0059615 Jy
! Component: 1000  -  total flux cleaned = -0.00613426 Jy
! Component: 1050  -  total flux cleaned = -0.00626956 Jy
! Component: 1100  -  total flux cleaned = -0.00650097 Jy
! Component: 1150  -  total flux cleaned = -0.00650048 Jy
! Component: 1200  -  total flux cleaned = -0.00656384 Jy
! Component: 1250  -  total flux cleaned = -0.00653293 Jy
! Component: 1300  -  total flux cleaned = -0.00659381 Jy
! Component: 1350  -  total flux cleaned = -0.00647417 Jy
! Component: 1400  -  total flux cleaned = -0.00650349 Jy
! Component: 1450  -  total flux cleaned = -0.00638743 Jy
! Component: 1500  -  total flux cleaned = -0.0063023 Jy
! Component: 1550  -  total flux cleaned = -0.00630207 Jy
! Component: 1600  -  total flux cleaned = -0.00621964 Jy
! Component: 1650  -  total flux cleaned = -0.00613895 Jy
! Component: 1700  -  total flux cleaned = -0.00611258 Jy
! Component: 1750  -  total flux cleaned = -0.00608655 Jy
! Component: 1800  -  total flux cleaned = -0.00603469 Jy
! Component: 1850  -  total flux cleaned = -0.00600926 Jy
! Component: 1900  -  total flux cleaned = -0.0059089 Jy
! Component: 1950  -  total flux cleaned = -0.00590905 Jy
! Component: 2000  -  total flux cleaned = -0.00590877 Jy
! Component: 2050  -  total flux cleaned = -0.00583576 Jy
! Component: 2100  -  total flux cleaned = -0.00581162 Jy
! Component: 2150  -  total flux cleaned = -0.00578788 Jy
! Component: 2200  -  total flux cleaned = -0.00581134 Jy
! Component: 2250  -  total flux cleaned = -0.00574127 Jy
! Component: 2300  -  total flux cleaned = -0.00562585 Jy
! Component: 2350  -  total flux cleaned = -0.00558013 Jy
! Component: 2400  -  total flux cleaned = -0.00555749 Jy
! Component: 2450  -  total flux cleaned = -0.00553506 Jy
! Component: 2500  -  total flux cleaned = -0.00551255 Jy
! Component: 2550  -  total flux cleaned = -0.00542397 Jy
! Component: 2600  -  total flux cleaned = -0.00540222 Jy
! Component: 2650  -  total flux cleaned = -0.0054023 Jy
! Component: 2700  -  total flux cleaned = -0.00538052 Jy
! Component: 2750  -  total flux cleaned = -0.00531587 Jy
! Component: 2800  -  total flux cleaned = -0.00533751 Jy
! Component: 2850  -  total flux cleaned = -0.00531618 Jy
! Component: 2900  -  total flux cleaned = -0.00525284 Jy
! Component: 2950  -  total flux cleaned = -0.00525282 Jy
! Component: 3000  -  total flux cleaned = -0.00521103 Jy
! Component: 3050  -  total flux cleaned = -0.00519024 Jy
! Component: 3100  -  total flux cleaned = -0.00519025 Jy
! Component: 3150  -  total flux cleaned = -0.00514904 Jy
! Component: 3200  -  total flux cleaned = -0.00514889 Jy
! Component: 3250  -  total flux cleaned = -0.00510808 Jy
! Component: 3300  -  total flux cleaned = -0.00504703 Jy
! Component: 3350  -  total flux cleaned = -0.00506725 Jy
! Component: 3400  -  total flux cleaned = -0.00498644 Jy
! Component: 3450  -  total flux cleaned = -0.00502681 Jy
! Component: 3500  -  total flux cleaned = -0.00496639 Jy
! Component: 3550  -  total flux cleaned = -0.00494624 Jy
! Component: 3600  -  total flux cleaned = -0.00492621 Jy
! Component: 3650  -  total flux cleaned = -0.00490608 Jy
! Component: 3700  -  total flux cleaned = -0.00490617 Jy
! Component: 3750  -  total flux cleaned = -0.0048664 Jy
! Component: 3800  -  total flux cleaned = -0.0048664 Jy
! Component: 3850  -  total flux cleaned = -0.0048464 Jy
! Component: 3900  -  total flux cleaned = -0.00488624 Jy
! Component: 3950  -  total flux cleaned = -0.00490616 Jy
! Component: 4000  -  total flux cleaned = -0.00492596 Jy
! Component: 4050  -  total flux cleaned = -0.00488624 Jy
! Total flux subtracted in 4096 components = -0.00488616 Jy
! Clean residual min=-0.001421 max=0.001098 Jy/beam
! Clean residual mean=0.000006 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.93306 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 427 components and 0.933059 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1354-0206_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.645 x 13.35 at -16.27 degrees (North through East)
! Clean map  min=-0.0032342  max=0.85847 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1354-0206_S_b_map.fits
wmodel /image_prod/ug002_uva//J1354-0206_S_b_map.mod
! Writing 427 model components to file: /image_prod/ug002_uva//J1354-0206_S_b_map.mod
wobs   /image_prod/ug002_uva//J1354-0206_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1354-0206_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1354-0206_S_b_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1354-0206_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.858468 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000332017 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.116027 0.116027 0.232053 0.464106 0.928213 1.85643 3.71285 7.4257 14.8514 29.7028 59.4056
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.858 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2585.61 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1354-0206_S_b_dfm.log closed on Thu Mar  5 01:30:08 2020