! Started logfile: /image_prod/ug002_uva//J1353+7532_S_dfm.log on Thu Mar 5 01:29:50 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1353+7532_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1353+7532_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.853704 visibilities/baseline/integration-bin. ! Found source: J1353+7532 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5532 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1353+7532_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.030961Jy sigma=7.301960 ! Fit after self-cal, rms=0.730183Jy sigma=5.175024 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=4.099 mas, bpa=7.981 degrees ! Estimated noise=2.0869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217881 Jy ! Component: 100 - total flux cleaned = 0.265393 Jy ! Total flux subtracted in 100 components = 0.265393 Jy ! Clean residual min=-0.009232 max=0.013252 Jy/beam ! Clean residual mean=0.000029 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.265393 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.265393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089409Jy sigma=0.533925 ! Fit after self-cal, rms=0.089404Jy sigma=0.533909 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=4.871 mas, bpa=7.965 degrees ! Estimated noise=1.37837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548369 Jy ! Component: 100 - total flux cleaned = -0.000979333 Jy ! Component: 150 - total flux cleaned = -0.00217496 Jy ! Component: 200 - total flux cleaned = -0.00297148 Jy ! Total flux subtracted in 200 components = -0.00297148 Jy ! Clean residual min=-0.010842 max=0.009743 Jy/beam ! Clean residual mean=0.000054 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 0.262421 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.262421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088127Jy sigma=0.524234 ! Fit after self-cal, rms=0.088100Jy sigma=0.524192 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.87 x 4.871 at 7.965 degrees (North through East) ! Clean map min=-0.010555 max=0.2753 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.97 KP 1.01 ! LA 1.04 MK 0.99 OV 0.82 PT 1.03 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.02 HN 0.94 KP 1.09 ! LA 1.05 MK 0.98 OV 0.89 PT 1.02 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00 HN 0.96 KP 1.07 ! LA 1.02 MK 0.95 OV 0.86 PT 1.02 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.088100Jy sigma=0.524192 ! Fit after self-cal, rms=0.079494Jy sigma=0.477202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=4.789 mas, bpa=7.877 degrees ! Estimated noise=1.36562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267177 Jy ! Component: 100 - total flux cleaned = 0.0030145 Jy ! Component: 150 - total flux cleaned = 0.00323564 Jy ! Component: 200 - total flux cleaned = 0.00342877 Jy ! Total flux subtracted in 200 components = 0.00342877 Jy ! Clean residual min=-0.005064 max=0.004475 Jy/beam ! Clean residual mean=0.000031 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.26585 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.26585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079261Jy sigma=0.476124 ! Fit after self-cal, rms=0.079311Jy sigma=0.475961 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079311Jy sigma=0.475961 ! Fit after self-cal, rms=0.077021Jy sigma=0.454741 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=4.826 mas, bpa=8.276 degrees ! Estimated noise=1.37023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230505 Jy ! Component: 100 - total flux cleaned = 0.00333497 Jy ! Component: 150 - total flux cleaned = 0.00343568 Jy ! Component: 200 - total flux cleaned = 0.00349212 Jy ! Total flux subtracted in 200 components = 0.00349212 Jy ! Clean residual min=-0.002682 max=0.002526 Jy/beam ! Clean residual mean=0.000009 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.269342 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.269342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076939Jy sigma=0.454230 ! Fit after self-cal, rms=0.077013Jy sigma=0.454126 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.29405e-05 Jy ! Component: 100 - total flux cleaned = 7.87881e-05 Jy ! Component: 150 - total flux cleaned = 0.00012032 Jy ! Component: 200 - total flux cleaned = 0.000140436 Jy ! Total flux subtracted in 200 components = 0.000140436 Jy ! Clean residual min=-0.002684 max=0.002512 Jy/beam ! Clean residual mean=0.000009 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.269483 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.269483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076996Jy sigma=0.454062 ! Fit after self-cal, rms=0.076999Jy sigma=0.454058 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076999Jy sigma=0.454058 ! Fit after self-cal, rms=0.076636Jy sigma=0.453768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=4.811 mas, bpa=8.242 degrees ! Estimated noise=1.37151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165955 Jy ! Component: 100 - total flux cleaned = 0.0023836 Jy ! Component: 150 - total flux cleaned = 0.00252404 Jy ! Component: 200 - total flux cleaned = 0.00256249 Jy ! Total flux subtracted in 200 components = 0.00256249 Jy ! Clean residual min=-0.002555 max=0.002435 Jy/beam ! Clean residual mean=0.000008 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.272045 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.272045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076592Jy sigma=0.453515 ! Fit after self-cal, rms=0.076590Jy sigma=0.453512 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.57967e-05 Jy ! Component: 100 - total flux cleaned = 4.54919e-05 Jy ! Component: 150 - total flux cleaned = 6.01071e-05 Jy ! Component: 200 - total flux cleaned = 6.00303e-05 Jy ! Total flux subtracted in 200 components = 6.00303e-05 Jy ! Clean residual min=-0.002559 max=0.002429 Jy/beam ! Clean residual mean=0.000008 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.272105 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.272105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076581Jy sigma=0.453484 ! Fit after self-cal, rms=0.076584Jy sigma=0.453482 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076584Jy sigma=0.453482 ! Fit after self-cal, rms=0.076326Jy sigma=0.453325 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.143 mas, bmaj=9.606 mas, bpa=7.79 degrees ! Estimated noise=1.75897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119251 Jy ! Component: 100 - total flux cleaned = 0.00156023 Jy ! Component: 150 - total flux cleaned = 0.00165431 Jy ! Component: 200 - total flux cleaned = 0.00165415 Jy ! Total flux subtracted in 200 components = 0.00165415 Jy ! Clean residual min=-0.002354 max=0.002669 Jy/beam ! Clean residual mean=0.000016 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.273759 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.273759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076319Jy sigma=0.453267 ! Fit after self-cal, rms=0.076311Jy sigma=0.453254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07015e-05 Jy ! Component: 100 - total flux cleaned = 1.64914e-05 Jy ! Component: 150 - total flux cleaned = 2.10619e-05 Jy ! Component: 200 - total flux cleaned = 1.72825e-05 Jy ! Total flux subtracted in 200 components = 1.72825e-05 Jy ! Clean residual min=-0.002354 max=0.002675 Jy/beam ! Clean residual mean=0.000016 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.273777 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 50 components and 0.273777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076314Jy sigma=0.453257 ! Fit after self-cal, rms=0.076313Jy sigma=0.453255 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=4.801 mas, bpa=8.2 degrees ! Estimated noise=1.37247 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.745 x 4.801 at 8.2 degrees (North through East) ! Clean map min=-0.0023561 max=0.27308 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=4.076 mas, bpa=8.408 degrees ! Estimated noise=2.04065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213068 Jy ! Component: 100 - total flux cleaned = 0.259534 Jy ! Component: 150 - total flux cleaned = 0.270227 Jy ! Component: 200 - total flux cleaned = 0.27181 Jy ! Total flux subtracted in 200 components = 0.27181 Jy ! Clean residual min=-0.003973 max=0.003900 Jy/beam ! Clean residual mean=0.000000 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.27181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.27181 Jy ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=4.801 mas, bpa=8.2 degrees ! Estimated noise=1.37247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208556 Jy ! Component: 100 - total flux cleaned = 0.00271154 Jy ! Component: 150 - total flux cleaned = 0.00307806 Jy ! Component: 200 - total flux cleaned = 0.00328115 Jy ! Total flux subtracted in 200 components = 0.00328115 Jy ! Clean residual min=-0.002287 max=0.002368 Jy/beam ! Clean residual mean=0.000010 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.275091 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.275091 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.143 mas, bmaj=9.606 mas, bpa=7.79 degrees ! Estimated noise=1.75897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263641 Jy ! Component: 100 - total flux cleaned = 0.000234269 Jy ! Component: 150 - total flux cleaned = 0.00021064 Jy ! Component: 200 - total flux cleaned = 0.000231648 Jy ! Total flux subtracted in 200 components = 0.000231648 Jy ! Clean residual min=-0.002291 max=0.002462 Jy/beam ! Clean residual mean=0.000024 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.275323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.42344e-07 Jy ! Component: 100 - total flux cleaned = -2.9957e-07 Jy ! Component: 150 - total flux cleaned = 1.62535e-05 Jy ! Component: 200 - total flux cleaned = 3.00332e-05 Jy ! Total flux subtracted in 200 components = 3.00332e-05 Jy ! Clean residual min=-0.002253 max=0.002460 Jy/beam ! Clean residual mean=0.000024 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.275353 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.275353 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=4.801 mas, bpa=8.2 degrees ! Estimated noise=1.37247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127163 Jy ! Component: 100 - total flux cleaned = 0.000261596 Jy ! Component: 150 - total flux cleaned = 0.000292824 Jy ! Component: 200 - total flux cleaned = 0.000349666 Jy ! Total flux subtracted in 200 components = 0.000349666 Jy ! Clean residual min=-0.002251 max=0.002438 Jy/beam ! Clean residual mean=0.000012 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.275702 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.275702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076205Jy sigma=0.452521 ! Fit after self-cal, rms=0.076202Jy sigma=0.452441 wmodel J1353+7532_S_map.mod ! Writing 57 model components to file: J1353+7532_S_map.mod wobs J1353+7532_S_uvs.fits ! Writing UV FITS file: J1353+7532_S_uvs.fits wwins J1353+7532_S_map.win ! wwins: Wrote 2 windows to J1353+7532_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277829 Jy ! Component: 100 - total flux cleaned = 0.000521588 Jy ! Component: 150 - total flux cleaned = 0.000831331 Jy ! Component: 200 - total flux cleaned = 0.000943556 Jy ! Component: 250 - total flux cleaned = 0.00112524 Jy ! Component: 300 - total flux cleaned = 0.00123062 Jy ! Component: 350 - total flux cleaned = 0.00133444 Jy ! Component: 400 - total flux cleaned = 0.00157158 Jy ! Component: 450 - total flux cleaned = 0.00170381 Jy ! Component: 500 - total flux cleaned = 0.00176929 Jy ! Component: 550 - total flux cleaned = 0.00183368 Jy ! Component: 600 - total flux cleaned = 0.00192789 Jy ! Component: 650 - total flux cleaned = 0.001897 Jy ! Component: 700 - total flux cleaned = 0.00201907 Jy ! Component: 750 - total flux cleaned = 0.00213931 Jy ! Component: 800 - total flux cleaned = 0.00225801 Jy ! Component: 850 - total flux cleaned = 0.00231623 Jy ! Component: 900 - total flux cleaned = 0.00234532 Jy ! Component: 950 - total flux cleaned = 0.00243188 Jy ! Component: 1000 - total flux cleaned = 0.00248898 Jy ! Component: 1050 - total flux cleaned = 0.00248888 Jy ! Component: 1100 - total flux cleaned = 0.00254406 Jy ! Component: 1150 - total flux cleaned = 0.00257181 Jy ! Component: 1200 - total flux cleaned = 0.00259836 Jy ! Component: 1250 - total flux cleaned = 0.0025718 Jy ! Component: 1300 - total flux cleaned = 0.00254511 Jy ! Component: 1350 - total flux cleaned = 0.00249297 Jy ! Component: 1400 - total flux cleaned = 0.00254509 Jy ! Component: 1450 - total flux cleaned = 0.00246833 Jy ! Component: 1500 - total flux cleaned = 0.00246795 Jy ! Component: 1550 - total flux cleaned = 0.00239282 Jy ! Component: 1600 - total flux cleaned = 0.0022686 Jy ! Component: 1650 - total flux cleaned = 0.00229337 Jy ! Component: 1700 - total flux cleaned = 0.00222003 Jy ! Component: 1750 - total flux cleaned = 0.00207503 Jy ! Component: 1800 - total flux cleaned = 0.00202722 Jy ! Component: 1850 - total flux cleaned = 0.00190895 Jy ! Component: 1900 - total flux cleaned = 0.00188561 Jy ! Component: 1950 - total flux cleaned = 0.00188556 Jy ! Component: 2000 - total flux cleaned = 0.00186248 Jy ! Component: 2050 - total flux cleaned = 0.00188512 Jy ! Component: 2100 - total flux cleaned = 0.00177192 Jy ! Component: 2150 - total flux cleaned = 0.00186183 Jy ! Component: 2200 - total flux cleaned = 0.0018841 Jy ! Component: 2250 - total flux cleaned = 0.00184011 Jy ! Component: 2300 - total flux cleaned = 0.00190578 Jy ! Component: 2350 - total flux cleaned = 0.00188381 Jy ! Component: 2400 - total flux cleaned = 0.00188387 Jy ! Component: 2450 - total flux cleaned = 0.00188424 Jy ! Component: 2500 - total flux cleaned = 0.00188398 Jy ! Component: 2550 - total flux cleaned = 0.00184203 Jy ! Component: 2600 - total flux cleaned = 0.00188409 Jy ! Component: 2650 - total flux cleaned = 0.00188392 Jy ! Component: 2700 - total flux cleaned = 0.00182224 Jy ! Component: 2750 - total flux cleaned = 0.00188377 Jy ! Component: 2800 - total flux cleaned = 0.00180259 Jy ! Component: 2850 - total flux cleaned = 0.00184281 Jy ! Component: 2900 - total flux cleaned = 0.00190281 Jy ! Component: 2950 - total flux cleaned = 0.00186309 Jy ! Component: 3000 - total flux cleaned = 0.00192227 Jy ! Component: 3050 - total flux cleaned = 0.00190255 Jy ! Component: 3100 - total flux cleaned = 0.00184438 Jy ! Component: 3150 - total flux cleaned = 0.00197936 Jy ! Component: 3200 - total flux cleaned = 0.00196021 Jy ! Component: 3250 - total flux cleaned = 0.00199827 Jy ! Component: 3300 - total flux cleaned = 0.00205485 Jy ! Component: 3350 - total flux cleaned = 0.00203603 Jy ! Component: 3400 - total flux cleaned = 0.00203613 Jy ! Component: 3450 - total flux cleaned = 0.00205462 Jy ! Component: 3500 - total flux cleaned = 0.00214646 Jy ! Component: 3550 - total flux cleaned = 0.00212797 Jy ! Component: 3600 - total flux cleaned = 0.00216418 Jy ! Component: 3650 - total flux cleaned = 0.00223641 Jy ! Component: 3700 - total flux cleaned = 0.00227213 Jy ! Component: 3750 - total flux cleaned = 0.00230753 Jy ! Component: 3800 - total flux cleaned = 0.00236069 Jy ! Component: 3850 - total flux cleaned = 0.00239595 Jy ! Component: 3900 - total flux cleaned = 0.00246594 Jy ! Component: 3950 - total flux cleaned = 0.00241371 Jy ! Component: 4000 - total flux cleaned = 0.00241376 Jy ! Component: 4050 - total flux cleaned = 0.00251686 Jy ! Total flux subtracted in 4096 components = 0.00246568 Jy ! Clean residual min=-0.001133 max=0.000921 Jy/beam ! Clean residual mean=0.000006 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.278168 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 344 components and 0.278168 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1353+7532_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.745 x 4.801 at 8.2 degrees (North through East) ! Clean map min=-0.0017207 max=0.27227 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1353+7532_S_map.fits wmodel /image_prod/ug002_uva//J1353+7532_S_map.mod ! Writing 344 model components to file: /image_prod/ug002_uva//J1353+7532_S_map.mod wobs /image_prod/ug002_uva//J1353+7532_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1353+7532_S_uvs.fits wwins /image_prod/ug002_uva//J1353+7532_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1353+7532_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.272271 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000290798 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.320414 0.320414 0.640827 1.28165 2.56331 5.12662 10.2532 20.5065 41.0129 82.0259 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.272 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 936.29 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1353+7532_S_dfm.log closed on Thu Mar 5 01:29:54 2020