! Started logfile: /image_prod/ug002_uva//J1349-3056_S_dfm.log on Thu Mar  5 01:27:53 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1349-3056_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1349-3056_S_uva.fits
! AN table 1: 25 integrations on 21 of 21 possible baselines.
! AN table 2: 25 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.982857 visibilities/baseline/integration-bin.
! Found source: J1349-3056
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3612 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1349-3056_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.014422Jy  sigma=6.746325
! Fit after  self-cal, rms=0.835376Jy  sigma=5.527038
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.281 mas, bmaj=24.57 mas, bpa=-14.68 degrees
! Estimated noise=2.24667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126589 Jy
! Component: 100  -  total flux cleaned = 0.158598 Jy
! Total flux subtracted in 100 components = 0.158598 Jy
! Clean residual min=-0.008710 max=0.013282 Jy/beam
! Clean residual mean=-0.000037 rms=0.002494 Jy/beam
! Combined flux in latest and established models = 0.158598 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.158598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079267Jy  sigma=0.490897
! Fit after  self-cal, rms=0.079244Jy  sigma=0.490759
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.15 mas, bmaj=25.14 mas, bpa=-13.76 degrees
! Estimated noise=1.82236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184305 Jy
! Component: 100  -  total flux cleaned = 0.0277299 Jy
! Component: 150  -  total flux cleaned = 0.0333276 Jy
! Component: 200  -  total flux cleaned = 0.0370156 Jy
! Total flux subtracted in 200 components = 0.0370156 Jy
! Clean residual min=-0.003916 max=0.003935 Jy/beam
! Clean residual mean=-0.000004 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.195614 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 83 components and 0.195614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075498Jy  sigma=0.457440
! Fit after  self-cal, rms=0.075508Jy  sigma=0.457247
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.15 x 25.14 at -13.76 degrees (North through East)
! Clean map  min=-0.0037901  max=0.16381 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.08     KP        0.98     LA        1.00     
!   NL        0.93     OV        0.98     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.98     KP        0.93     LA        1.01     
!   MK        1.04     NL        1.00     OV        0.97     PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.10     KP        1.00     LA        1.03     
!   NL        1.10     OV        0.99     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.00     KP        0.95     LA        0.91     
!   MK        1.01     NL        1.24     OV        0.98     PT        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.09     KP        0.96     LA        1.02     
!   NL        0.97     OV        0.96     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        0.98     KP        0.97     LA        1.05     
!   MK        0.95     NL        1.02     OV        0.95     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.075508Jy  sigma=0.457247
! Fit after  self-cal, rms=0.077217Jy  sigma=0.450448
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.185 mas, bmaj=25.46 mas, bpa=-13.83 degrees
! Estimated noise=1.82208 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000748682 Jy
! Component: 100  -  total flux cleaned = -0.0010859 Jy
! Component: 150  -  total flux cleaned = -0.00129169 Jy
! Component: 200  -  total flux cleaned = -0.00147413 Jy
! Total flux subtracted in 200 components = -0.00147413 Jy
! Clean residual min=-0.002699 max=0.003435 Jy/beam
! Clean residual mean=-0.000021 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.19414 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.19414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077152Jy  sigma=0.450131
! Fit after  self-cal, rms=0.077229Jy  sigma=0.450035
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077229Jy  sigma=0.450035
! Fit after  self-cal, rms=0.077361Jy  sigma=0.450007
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.184 mas, bmaj=25.5 mas, bpa=-13.84 degrees
! Estimated noise=1.82011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000678663 Jy
! Component: 100  -  total flux cleaned = -0.000864634 Jy
! Component: 150  -  total flux cleaned = -0.00102063 Jy
! Component: 200  -  total flux cleaned = -0.00113061 Jy
! Total flux subtracted in 200 components = -0.00113061 Jy
! Clean residual min=-0.002565 max=0.003353 Jy/beam
! Clean residual mean=-0.000020 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.193009 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 108 components and 0.193009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077322Jy  sigma=0.449832
! Fit after  self-cal, rms=0.077324Jy  sigma=0.449809
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-62, 20.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001729 Jy
! Component: 100  -  total flux cleaned = 0.00167502 Jy
! Component: 150  -  total flux cleaned = 0.00133457 Jy
! Component: 200  -  total flux cleaned = 0.00104579 Jy
! Total flux subtracted in 200 components = 0.00104579 Jy
! Clean residual min=-0.002247 max=0.002170 Jy/beam
! Clean residual mean=-0.000025 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.194055 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 0.194055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077154Jy  sigma=0.448783
! Fit after  self-cal, rms=0.077156Jy  sigma=0.448713
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077156Jy  sigma=0.448713
! Fit after  self-cal, rms=0.076976Jy  sigma=0.448615
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.177 mas, bmaj=25.52 mas, bpa=-13.85 degrees
! Estimated noise=1.81367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158809 Jy
! Component: 100  -  total flux cleaned = 2.80482e-05 Jy
! Component: 150  -  total flux cleaned = -0.000275179 Jy
! Component: 200  -  total flux cleaned = -0.00047963 Jy
! Total flux subtracted in 200 components = -0.00047963 Jy
! Clean residual min=-0.002079 max=0.002142 Jy/beam
! Clean residual mean=-0.000022 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.193575 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 155 components and 0.193575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076924Jy  sigma=0.448333
! Fit after  self-cal, rms=0.076930Jy  sigma=0.448319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118282 Jy
! Component: 100  -  total flux cleaned = -0.000242892 Jy
! Component: 150  -  total flux cleaned = -0.000329605 Jy
! Component: 200  -  total flux cleaned = -0.000356447 Jy
! Total flux subtracted in 200 components = -0.000356447 Jy
! Clean residual min=-0.002016 max=0.002080 Jy/beam
! Clean residual mean=-0.000023 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.193219 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 166 components and 0.193219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076908Jy  sigma=0.448191
! Fit after  self-cal, rms=0.076909Jy  sigma=0.448187
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076909Jy  sigma=0.448187
! Fit after  self-cal, rms=0.076800Jy  sigma=0.448162
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.103 mas, bmaj=29.08 mas, bpa=-6.066 degrees
! Estimated noise=2.01066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000403275 Jy
! Component: 100  -  total flux cleaned = 0.00065298 Jy
! Component: 150  -  total flux cleaned = 0.000771216 Jy
! Component: 200  -  total flux cleaned = 0.000823057 Jy
! Total flux subtracted in 200 components = 0.000823057 Jy
! Clean residual min=-0.001861 max=0.002036 Jy/beam
! Clean residual mean=-0.000031 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.194042 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 189 components and 0.194042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076792Jy  sigma=0.448099
! Fit after  self-cal, rms=0.076791Jy  sigma=0.448091
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124092 Jy
! Component: 100  -  total flux cleaned = 0.000174026 Jy
! Component: 150  -  total flux cleaned = 0.000143127 Jy
! Component: 200  -  total flux cleaned = 0.000128127 Jy
! Total flux subtracted in 200 components = 0.000128127 Jy
! Clean residual min=-0.001837 max=0.002023 Jy/beam
! Clean residual mean=-0.000032 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.19417 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 209 components and 0.19417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076785Jy  sigma=0.448056
! Fit after  self-cal, rms=0.076785Jy  sigma=0.448052
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=25.52 mas, bpa=-13.86 degrees
! Estimated noise=1.8113 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.173 x 25.52 at -13.86 degrees (North through East)
! Clean map  min=-0.0032636  max=0.16404 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.283 mas, bmaj=24.97 mas, bpa=-14.76 degrees
! Estimated noise=2.24041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126105 Jy
! Component: 100  -  total flux cleaned = 0.157995 Jy
! Component: 150  -  total flux cleaned = 0.172105 Jy
! Component: 200  -  total flux cleaned = 0.1799 Jy
! Total flux subtracted in 200 components = 0.1799 Jy
! Clean residual min=-0.004201 max=0.004603 Jy/beam
! Clean residual mean=-0.000019 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.1799 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.1799 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=25.52 mas, bpa=-13.86 degrees
! Estimated noise=1.8113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587505 Jy
! Component: 100  -  total flux cleaned = 0.00874679 Jy
! Component: 150  -  total flux cleaned = 0.0103893 Jy
! Component: 200  -  total flux cleaned = 0.0114479 Jy
! Total flux subtracted in 200 components = 0.0114479 Jy
! Clean residual min=-0.002347 max=0.002668 Jy/beam
! Clean residual mean=-0.000023 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.191348 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 81 components and 0.191348 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.103 mas, bmaj=29.08 mas, bpa=-6.066 degrees
! Estimated noise=2.01066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124002 Jy
! Component: 100  -  total flux cleaned = 0.0017719 Jy
! Component: 150  -  total flux cleaned = 0.00204632 Jy
! Component: 200  -  total flux cleaned = 0.00216218 Jy
! Total flux subtracted in 200 components = 0.00216218 Jy
! Clean residual min=-0.002189 max=0.002327 Jy/beam
! Clean residual mean=-0.000031 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.19351 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107636 Jy
! Component: 100  -  total flux cleaned = 0.000240329 Jy
! Component: 150  -  total flux cleaned = 0.00030245 Jy
! Component: 200  -  total flux cleaned = 0.000359549 Jy
! Total flux subtracted in 200 components = 0.000359549 Jy
! Clean residual min=-0.002060 max=0.002260 Jy/beam
! Clean residual mean=-0.000031 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.19387 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 141 components and 0.19387 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=25.52 mas, bpa=-13.86 degrees
! Estimated noise=1.8113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00028985 Jy
! Component: 100  -  total flux cleaned = -0.000340497 Jy
! Component: 150  -  total flux cleaned = -0.000340585 Jy
! Component: 200  -  total flux cleaned = -0.000453539 Jy
! Total flux subtracted in 200 components = -0.000453539 Jy
! Clean residual min=-0.002040 max=0.002126 Jy/beam
! Clean residual mean=-0.000022 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.193416 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 175 components and 0.193416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076835Jy  sigma=0.448469
! Fit after  self-cal, rms=0.076824Jy  sigma=0.448420
wmodel J1349-3056_S_map.mod
! Writing 175 model components to file: J1349-3056_S_map.mod
wobs   J1349-3056_S_uvs.fits
! Writing UV FITS file: J1349-3056_S_uvs.fits
wwins  J1349-3056_S_map.win
! wwins: Wrote 2 windows to J1349-3056_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000679073 Jy
! Component: 100  -  total flux cleaned = 0.000818282 Jy
! Component: 150  -  total flux cleaned = 0.000973499 Jy
! Component: 200  -  total flux cleaned = 0.0010314 Jy
! Component: 250  -  total flux cleaned = 0.00114238 Jy
! Component: 300  -  total flux cleaned = 0.00124721 Jy
! Component: 350  -  total flux cleaned = 0.0013477 Jy
! Component: 400  -  total flux cleaned = 0.00146928 Jy
! Component: 450  -  total flux cleaned = 0.00146897 Jy
! Component: 500  -  total flux cleaned = 0.00149132 Jy
! Component: 550  -  total flux cleaned = 0.00149163 Jy
! Component: 600  -  total flux cleaned = 0.00157827 Jy
! Component: 650  -  total flux cleaned = 0.0014932 Jy
! Component: 700  -  total flux cleaned = 0.00149315 Jy
! Component: 750  -  total flux cleaned = 0.00151326 Jy
! Component: 800  -  total flux cleaned = 0.00157255 Jy
! Component: 850  -  total flux cleaned = 0.0015917 Jy
! Component: 900  -  total flux cleaned = 0.00159197 Jy
! Component: 950  -  total flux cleaned = 0.00161088 Jy
! Component: 1000  -  total flux cleaned = 0.00170218 Jy
! Component: 1050  -  total flux cleaned = 0.00173777 Jy
! Component: 1100  -  total flux cleaned = 0.00173769 Jy
! Component: 1150  -  total flux cleaned = 0.00170315 Jy
! Component: 1200  -  total flux cleaned = 0.00171992 Jy
! Component: 1250  -  total flux cleaned = 0.00168619 Jy
! Component: 1300  -  total flux cleaned = 0.00165338 Jy
! Component: 1350  -  total flux cleaned = 0.00160521 Jy
! Component: 1400  -  total flux cleaned = 0.0015896 Jy
! Component: 1450  -  total flux cleaned = 0.00157396 Jy
! Component: 1500  -  total flux cleaned = 0.00155863 Jy
! Component: 1550  -  total flux cleaned = 0.0015437 Jy
! Component: 1600  -  total flux cleaned = 0.00155829 Jy
! Component: 1650  -  total flux cleaned = 0.00152884 Jy
! Component: 1700  -  total flux cleaned = 0.00147114 Jy
! Component: 1750  -  total flux cleaned = 0.00147131 Jy
! Component: 1800  -  total flux cleaned = 0.00144313 Jy
! Component: 1850  -  total flux cleaned = 0.00140195 Jy
! Component: 1900  -  total flux cleaned = 0.00140216 Jy
! Component: 1950  -  total flux cleaned = 0.00137551 Jy
! Component: 2000  -  total flux cleaned = 0.00137572 Jy
! Component: 2050  -  total flux cleaned = 0.00137575 Jy
! Component: 2100  -  total flux cleaned = 0.00138846 Jy
! Component: 2150  -  total flux cleaned = 0.00137565 Jy
! Component: 2200  -  total flux cleaned = 0.00133799 Jy
! Component: 2250  -  total flux cleaned = 0.00132556 Jy
! Component: 2300  -  total flux cleaned = 0.00131332 Jy
! Component: 2350  -  total flux cleaned = 0.00130117 Jy
! Component: 2400  -  total flux cleaned = 0.00126521 Jy
! Component: 2450  -  total flux cleaned = 0.00125353 Jy
! Component: 2500  -  total flux cleaned = 0.00123003 Jy
! Component: 2550  -  total flux cleaned = 0.00120687 Jy
! Component: 2600  -  total flux cleaned = 0.00120692 Jy
! Component: 2650  -  total flux cleaned = 0.00121828 Jy
! Component: 2700  -  total flux cleaned = 0.00124067 Jy
! Component: 2750  -  total flux cleaned = 0.00126299 Jy
! Component: 2800  -  total flux cleaned = 0.00124097 Jy
! Component: 2850  -  total flux cleaned = 0.00128476 Jy
! Component: 2900  -  total flux cleaned = 0.00126318 Jy
! Component: 2950  -  total flux cleaned = 0.00129551 Jy
! Component: 3000  -  total flux cleaned = 0.00132758 Jy
! Component: 3050  -  total flux cleaned = 0.00131707 Jy
! Component: 3100  -  total flux cleaned = 0.00135902 Jy
! Component: 3150  -  total flux cleaned = 0.00137986 Jy
! Component: 3200  -  total flux cleaned = 0.00139013 Jy
! Component: 3250  -  total flux cleaned = 0.00144147 Jy
! Component: 3300  -  total flux cleaned = 0.00149239 Jy
! Component: 3350  -  total flux cleaned = 0.00156326 Jy
! Component: 3400  -  total flux cleaned = 0.00163366 Jy
! Component: 3450  -  total flux cleaned = 0.00169361 Jy
! Component: 3500  -  total flux cleaned = 0.00176307 Jy
! Component: 3550  -  total flux cleaned = 0.00180252 Jy
! Component: 3600  -  total flux cleaned = 0.00189077 Jy
! Component: 3650  -  total flux cleaned = 0.00193948 Jy
! Component: 3700  -  total flux cleaned = 0.00203634 Jy
! Component: 3750  -  total flux cleaned = 0.00209407 Jy
! Component: 3800  -  total flux cleaned = 0.00215146 Jy
! Component: 3850  -  total flux cleaned = 0.00218955 Jy
! Component: 3900  -  total flux cleaned = 0.00226533 Jy
! Component: 3950  -  total flux cleaned = 0.00231231 Jy
! Component: 4000  -  total flux cleaned = 0.00237781 Jy
! Component: 4050  -  total flux cleaned = 0.00243368 Jy
! Total flux subtracted in 4096 components = 0.00248009 Jy
! Clean residual min=-0.000511 max=0.000509 Jy/beam
! Clean residual mean=-0.000002 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.195896 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 466 components and 0.195896 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1349-3056_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.173 x 25.52 at -13.86 degrees (North through East)
! Clean map  min=-0.0026613  max=0.16437 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1349-3056_S_map.fits
wmodel /image_prod/ug002_uva//J1349-3056_S_map.mod
! Writing 466 model components to file: /image_prod/ug002_uva//J1349-3056_S_map.mod
wobs   /image_prod/ug002_uva//J1349-3056_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1349-3056_S_uvs.fits
wwins  /image_prod/ug002_uva//J1349-3056_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1349-3056_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.164374 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018251 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.3331 0.3331 0.6662 1.3324 2.6648 5.3296 10.6592 21.3184 42.6368 85.2736
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.164 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  900.63 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1349-3056_S_dfm.log closed on Thu Mar  5 01:27:56 2020