! Started logfile: /image_prod/ug002_uva//J1343+6602_S_b_dfm.log on Thu Mar 5 01:24:41 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1343+6602_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1343+6602_S_b_uva.fits ! AN table 1: 7 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.862245 visibilities/baseline/integration-bin. ! Found source: J1343+6602 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 507 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1343+6602_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.038764Jy sigma=7.663869 ! Fit after self-cal, rms=0.800044Jy sigma=5.795804 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=14.45 mas, bpa=-53.95 degrees ! Estimated noise=5.33439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167995 Jy ! Component: 100 - total flux cleaned = 0.223829 Jy ! Total flux subtracted in 100 components = 0.223829 Jy ! Clean residual min=-0.018075 max=0.029850 Jy/beam ! Clean residual mean=-0.000007 rms=0.006683 Jy/beam ! Combined flux in latest and established models = 0.223829 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.223829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.111625Jy sigma=0.722939 ! Fit after self-cal, rms=0.111316Jy sigma=0.719700 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=15.79 mas, bpa=-54.23 degrees ! Estimated noise=4.56424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356895 Jy ! Component: 100 - total flux cleaned = 0.0569438 Jy ! Component: 150 - total flux cleaned = 0.0712245 Jy ! Component: 200 - total flux cleaned = 0.0809568 Jy ! Total flux subtracted in 200 components = 0.0809568 Jy ! Clean residual min=-0.013017 max=0.014867 Jy/beam ! Clean residual mean=0.000037 rms=0.003963 Jy/beam ! Combined flux in latest and established models = 0.304786 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.304786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100321Jy sigma=0.597936 ! Fit after self-cal, rms=0.099951Jy sigma=0.597113 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 15.79 at -54.23 degrees (North through East) ! Clean map min=-0.01363 max=0.20348 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 1.01 LA 0.99 MK 1.05 ! NL 1.26 OV 0.94 PT 1.06 SC 0.77 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 0.87 LA 0.96 MK 0.97 ! NL 0.95 OV 0.93 PT 1.08 SC 2.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.88 KP 1.00 LA 1.05 MK 1.04 ! NL 1.23 OV 0.89 PT 1.08 SC 0.95 ! ! ! Fit before self-cal, rms=0.099951Jy sigma=0.597113 ! Fit after self-cal, rms=0.120596Jy sigma=0.553544 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=16.02 mas, bpa=-53.92 degrees ! Estimated noise=4.58648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00538018 Jy ! Component: 100 - total flux cleaned = -0.00614792 Jy ! Component: 150 - total flux cleaned = -0.00627141 Jy ! Component: 200 - total flux cleaned = -0.00626638 Jy ! Total flux subtracted in 200 components = -0.00626638 Jy ! Clean residual min=-0.010115 max=0.009279 Jy/beam ! Clean residual mean=0.000012 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 0.298519 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.298519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.119953Jy sigma=0.551229 ! Fit after self-cal, rms=0.120172Jy sigma=0.550632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.120172Jy sigma=0.550632 ! Fit after self-cal, rms=0.122989Jy sigma=0.550141 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=16.1 mas, bpa=-53.82 degrees ! Estimated noise=4.6001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00420299 Jy ! Component: 100 - total flux cleaned = -0.00465513 Jy ! Component: 150 - total flux cleaned = -0.00475547 Jy ! Component: 200 - total flux cleaned = -0.00484433 Jy ! Total flux subtracted in 200 components = -0.00484433 Jy ! Clean residual min=-0.009572 max=0.008922 Jy/beam ! Clean residual mean=0.000013 rms=0.002434 Jy/beam ! Combined flux in latest and established models = 0.293675 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.293675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122566Jy sigma=0.548842 ! Fit after self-cal, rms=0.122571Jy sigma=0.548667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102463 Jy ! Component: 100 - total flux cleaned = -0.000858549 Jy ! Component: 150 - total flux cleaned = -0.000783811 Jy ! Component: 200 - total flux cleaned = -0.000924311 Jy ! Total flux subtracted in 200 components = -0.000924311 Jy ! Clean residual min=-0.009108 max=0.008905 Jy/beam ! Clean residual mean=0.000014 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 0.292751 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.292751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122347Jy sigma=0.548183 ! Fit after self-cal, rms=0.122330Jy sigma=0.548078 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.122330Jy sigma=0.548078 ! Fit after self-cal, rms=0.125413Jy sigma=0.547475 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=16.21 mas, bpa=-53.7 degrees ! Estimated noise=4.62371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327595 Jy ! Component: 100 - total flux cleaned = -0.00396554 Jy ! Component: 150 - total flux cleaned = -0.00418469 Jy ! Component: 200 - total flux cleaned = -0.00444416 Jy ! Total flux subtracted in 200 components = -0.00444416 Jy ! Clean residual min=-0.008915 max=0.008547 Jy/beam ! Clean residual mean=0.000013 rms=0.002333 Jy/beam ! Combined flux in latest and established models = 0.288307 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.288307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.125180Jy sigma=0.546629 ! Fit after self-cal, rms=0.125203Jy sigma=0.546522 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671799 Jy ! Component: 100 - total flux cleaned = -0.000608592 Jy ! Component: 150 - total flux cleaned = -0.00072718 Jy ! Component: 200 - total flux cleaned = -0.000728454 Jy ! Total flux subtracted in 200 components = -0.000728454 Jy ! Clean residual min=-0.008708 max=0.008469 Jy/beam ! Clean residual mean=0.000014 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.287578 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.287578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.125077Jy sigma=0.546249 ! Fit after self-cal, rms=0.125065Jy sigma=0.546177 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.125065Jy sigma=0.546177 ! Fit after self-cal, rms=0.127953Jy sigma=0.545718 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.801 mas, bmaj=19.16 mas, bpa=-64.18 degrees ! Estimated noise=5.76025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028997 Jy ! Component: 100 - total flux cleaned = -0.00425358 Jy ! Component: 150 - total flux cleaned = -0.00456929 Jy ! Component: 200 - total flux cleaned = -0.00474966 Jy ! Total flux subtracted in 200 components = -0.00474966 Jy ! Clean residual min=-0.009775 max=0.007676 Jy/beam ! Clean residual mean=0.000012 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 0.282829 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 0.282829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.127863Jy sigma=0.545130 ! Fit after self-cal, rms=0.127890Jy sigma=0.545057 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333393 Jy ! Component: 100 - total flux cleaned = 0.000248298 Jy ! Component: 150 - total flux cleaned = 0.000170076 Jy ! Component: 200 - total flux cleaned = 9.59146e-05 Jy ! Total flux subtracted in 200 components = 9.59146e-05 Jy ! Clean residual min=-0.009599 max=0.007559 Jy/beam ! Clean residual mean=0.000013 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.282924 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 0.282924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.127848Jy sigma=0.544962 ! Fit after self-cal, rms=0.127850Jy sigma=0.544936 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=16.3 mas, bpa=-53.6 degrees ! Estimated noise=4.64172 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 16.3 at -53.6 degrees (North through East) ! Clean map min=-0.0081131 max=0.20198 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=14.91 mas, bpa=-53.4 degrees ! Estimated noise=5.4982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172554 Jy ! Component: 100 - total flux cleaned = 0.220779 Jy ! Component: 150 - total flux cleaned = 0.244154 Jy ! Component: 200 - total flux cleaned = 0.258404 Jy ! Total flux subtracted in 200 components = 0.258404 Jy ! Clean residual min=-0.011681 max=0.012362 Jy/beam ! Clean residual mean=-0.000002 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 0.258404 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.258404 Jy ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=16.3 mas, bpa=-53.6 degrees ! Estimated noise=4.64172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137828 Jy ! Component: 100 - total flux cleaned = 0.0188402 Jy ! Component: 150 - total flux cleaned = 0.0222213 Jy ! Component: 200 - total flux cleaned = 0.0246594 Jy ! Total flux subtracted in 200 components = 0.0246594 Jy ! Clean residual min=-0.009420 max=0.009894 Jy/beam ! Clean residual mean=0.000014 rms=0.002604 Jy/beam ! Combined flux in latest and established models = 0.283063 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.283063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.801 mas, bmaj=19.16 mas, bpa=-64.18 degrees ! Estimated noise=5.76025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190608 Jy ! Component: 100 - total flux cleaned = 0.0013816 Jy ! Component: 150 - total flux cleaned = 0.000983385 Jy ! Component: 200 - total flux cleaned = 0.000981334 Jy ! Total flux subtracted in 200 components = 0.000981334 Jy ! Clean residual min=-0.009590 max=0.008790 Jy/beam ! Clean residual mean=0.000009 rms=0.002608 Jy/beam ! Combined flux in latest and established models = 0.284045 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152735 Jy ! Component: 100 - total flux cleaned = -0.000297568 Jy ! Component: 150 - total flux cleaned = -0.000497955 Jy ! Component: 200 - total flux cleaned = -0.000624999 Jy ! Total flux subtracted in 200 components = -0.000624999 Jy ! Clean residual min=-0.009443 max=0.008363 Jy/beam ! Clean residual mean=0.000009 rms=0.002569 Jy/beam ! Combined flux in latest and established models = 0.28342 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 80 components and 0.28342 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=16.3 mas, bpa=-53.6 degrees ! Estimated noise=4.64172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116786 Jy ! Component: 100 - total flux cleaned = -0.0011751 Jy ! Component: 150 - total flux cleaned = -0.000957316 Jy ! Component: 200 - total flux cleaned = -0.000756495 Jy ! Total flux subtracted in 200 components = -0.000756495 Jy ! Clean residual min=-0.008570 max=0.008621 Jy/beam ! Clean residual mean=0.000011 rms=0.002304 Jy/beam ! Combined flux in latest and established models = 0.282663 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.282663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.128117Jy sigma=0.546554 ! Fit after self-cal, rms=0.127938Jy sigma=0.546319 wmodel J1343+6602_S_b_map.mod ! Writing 96 model components to file: J1343+6602_S_b_map.mod wobs J1343+6602_S_b_uvs.fits ! Writing UV FITS file: J1343+6602_S_b_uvs.fits wwins J1343+6602_S_b_map.win ! wwins: Wrote 1 windows to J1343+6602_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647469 Jy ! Component: 100 - total flux cleaned = 0.000920802 Jy ! Component: 150 - total flux cleaned = 0.000685821 Jy ! Component: 200 - total flux cleaned = 0.000245409 Jy ! Component: 250 - total flux cleaned = 0.000142189 Jy ! Component: 300 - total flux cleaned = 0.000243765 Jy ! Component: 350 - total flux cleaned = 0.000532908 Jy ! Component: 400 - total flux cleaned = 0.000532955 Jy ! Component: 450 - total flux cleaned = 0.000532429 Jy ! Component: 500 - total flux cleaned = 0.000446942 Jy ! Component: 550 - total flux cleaned = 0.000282943 Jy ! Component: 600 - total flux cleaned = 4.10334e-05 Jy ! Component: 650 - total flux cleaned = -0.000116349 Jy ! Component: 700 - total flux cleaned = -0.000419474 Jy ! Component: 750 - total flux cleaned = -0.000714036 Jy ! Component: 800 - total flux cleaned = -0.00100042 Jy ! Component: 850 - total flux cleaned = -0.00127979 Jy ! Component: 900 - total flux cleaned = -0.00182203 Jy ! Component: 950 - total flux cleaned = -0.00228488 Jy ! Component: 1000 - total flux cleaned = -0.00254428 Jy ! Component: 1050 - total flux cleaned = -0.00267003 Jy ! Component: 1100 - total flux cleaned = -0.00285738 Jy ! Component: 1150 - total flux cleaned = -0.00303946 Jy ! Component: 1200 - total flux cleaned = -0.00327769 Jy ! Component: 1250 - total flux cleaned = -0.00333647 Jy ! Component: 1300 - total flux cleaned = -0.00356675 Jy ! Component: 1350 - total flux cleaned = -0.00356585 Jy ! Component: 1400 - total flux cleaned = -0.00356592 Jy ! Component: 1450 - total flux cleaned = -0.0037316 Jy ! Component: 1500 - total flux cleaned = -0.00362215 Jy ! Component: 1550 - total flux cleaned = -0.0038919 Jy ! Component: 1600 - total flux cleaned = -0.00383812 Jy ! Component: 1650 - total flux cleaned = -0.00394361 Jy ! Component: 1700 - total flux cleaned = -0.00404798 Jy ! Component: 1750 - total flux cleaned = -0.00409983 Jy ! Component: 1800 - total flux cleaned = -0.00410016 Jy ! Component: 1850 - total flux cleaned = -0.00420167 Jy ! Component: 1900 - total flux cleaned = -0.00440396 Jy ! Component: 1950 - total flux cleaned = -0.00455414 Jy ! Component: 2000 - total flux cleaned = -0.00485368 Jy ! Component: 2050 - total flux cleaned = -0.00525056 Jy ! Component: 2100 - total flux cleaned = -0.00544795 Jy ! Component: 2150 - total flux cleaned = -0.00564465 Jy ! Component: 2200 - total flux cleaned = -0.00593835 Jy ! Component: 2250 - total flux cleaned = -0.00618198 Jy ! Component: 2300 - total flux cleaned = -0.00642494 Jy ! Component: 2350 - total flux cleaned = -0.00661859 Jy ! Component: 2400 - total flux cleaned = -0.00690819 Jy ! Component: 2450 - total flux cleaned = -0.00710068 Jy ! Component: 2500 - total flux cleaned = -0.00734071 Jy ! Component: 2550 - total flux cleaned = -0.00753201 Jy ! Component: 2600 - total flux cleaned = -0.00777036 Jy ! Component: 2650 - total flux cleaned = -0.0078181 Jy ! Component: 2700 - total flux cleaned = -0.00796188 Jy ! Component: 2750 - total flux cleaned = -0.0080097 Jy ! Component: 2800 - total flux cleaned = -0.00810631 Jy ! Component: 2850 - total flux cleaned = -0.00820339 Jy ! Component: 2900 - total flux cleaned = -0.00834942 Jy ! Component: 2950 - total flux cleaned = -0.00849625 Jy ! Component: 3000 - total flux cleaned = -0.00869277 Jy ! Component: 3050 - total flux cleaned = -0.00884048 Jy ! Component: 3100 - total flux cleaned = -0.00903876 Jy ! Component: 3150 - total flux cleaned = -0.00918835 Jy ! Component: 3200 - total flux cleaned = -0.00923893 Jy ! Component: 3250 - total flux cleaned = -0.0092899 Jy ! Component: 3300 - total flux cleaned = -0.0092896 Jy ! Component: 3350 - total flux cleaned = -0.00923683 Jy ! Component: 3400 - total flux cleaned = -0.00918366 Jy ! Component: 3450 - total flux cleaned = -0.00907581 Jy ! Component: 3500 - total flux cleaned = -0.00907552 Jy ! Component: 3550 - total flux cleaned = -0.00896422 Jy ! Component: 3600 - total flux cleaned = -0.00890808 Jy ! Component: 3650 - total flux cleaned = -0.00879273 Jy ! Component: 3700 - total flux cleaned = -0.00873444 Jy ! Component: 3750 - total flux cleaned = -0.0086756 Jy ! Component: 3800 - total flux cleaned = -0.00867647 Jy ! Component: 3850 - total flux cleaned = -0.00861537 Jy ! Component: 3900 - total flux cleaned = -0.00855311 Jy ! Component: 3950 - total flux cleaned = -0.00848931 Jy ! Component: 4000 - total flux cleaned = -0.00848921 Jy ! Component: 4050 - total flux cleaned = -0.00842404 Jy ! Total flux subtracted in 4096 components = -0.00835691 Jy ! Clean residual min=-0.003792 max=0.003964 Jy/beam ! Clean residual mean=-0.000004 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.274306 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 340 components and 0.274306 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1343+6602_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.955 x 16.3 at -53.6 degrees (North through East) ! Clean map min=-0.0097243 max=0.20659 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1343+6602_S_b_map.fits wmodel /image_prod/ug002_uva//J1343+6602_S_b_map.mod ! Writing 340 model components to file: /image_prod/ug002_uva//J1343+6602_S_b_map.mod wobs /image_prod/ug002_uva//J1343+6602_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1343+6602_S_b_uvs.fits wwins /image_prod/ug002_uva//J1343+6602_S_b_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1343+6602_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.20659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000947157 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.37542 1.37542 2.75083 5.50166 11.0033 22.0066 44.0133 88.0266 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.206 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 218.115 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1343+6602_S_b_dfm.log closed on Thu Mar 5 01:24:45 2020