! Started logfile: /image_prod/ug002_uva//J1341-1643_S_dfm.log on Thu Mar 5 01:23:20 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1341-1643_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1341-1643_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.767857 visibilities/baseline/integration-bin. ! Found source: J1341-1643 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3225 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1341-1643_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003610Jy sigma=8.077302 ! Fit after self-cal, rms=0.960094Jy sigma=7.726632 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.332 mas, bpa=0.9033 degrees ! Estimated noise=2.76885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321995 Jy ! Component: 100 - total flux cleaned = 0.0408523 Jy ! Total flux subtracted in 100 components = 0.0408523 Jy ! Clean residual min=-0.005744 max=0.005524 Jy/beam ! Clean residual mean=-0.000008 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.0408524 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0408524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060828Jy sigma=0.452815 ! Fit after self-cal, rms=0.059475Jy sigma=0.442602 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=10.17 mas, bpa=0.3893 degrees ! Estimated noise=1.57232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434552 Jy ! Component: 100 - total flux cleaned = 0.00571332 Jy ! Component: 150 - total flux cleaned = 0.00577768 Jy ! Component: 200 - total flux cleaned = 0.00580835 Jy ! Total flux subtracted in 200 components = 0.00580835 Jy ! Clean residual min=-0.002983 max=0.003073 Jy/beam ! Clean residual mean=-0.000002 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0466607 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.0466607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059189Jy sigma=0.440349 ! Fit after self-cal, rms=0.059180Jy sigma=0.440289 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.823 x 10.17 at 0.3893 degrees (North through East) ! Clean map min=-0.002886 max=0.042644 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 1.04 LA 0.92 MK 1.05 ! NL 0.89 OV 1.20 PT 0.94 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.12 LA 0.94 MK 1.01 ! NL 1.09 OV 1.03 PT 0.97 SC 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 1.03 LA 0.95 MK 0.93 ! NL 0.91 OV 1.03 PT 1.00 SC 1.23 ! ! ! Fit before self-cal, rms=0.059180Jy sigma=0.440289 ! Fit after self-cal, rms=0.058368Jy sigma=0.438772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=10.05 mas, bpa=0.626 degrees ! Estimated noise=1.55521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16841e-05 Jy ! Component: 100 - total flux cleaned = 6.98873e-06 Jy ! Component: 150 - total flux cleaned = -1.5623e-05 Jy ! Component: 200 - total flux cleaned = -3.66452e-05 Jy ! Total flux subtracted in 200 components = -3.66452e-05 Jy ! Clean residual min=-0.002858 max=0.002918 Jy/beam ! Clean residual mean=-0.000002 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0466241 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.0466241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058343Jy sigma=0.438678 ! Fit after self-cal, rms=0.058415Jy sigma=0.438411 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058415Jy sigma=0.438411 ! Fit after self-cal, rms=0.058534Jy sigma=0.437772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=9.982 mas, bpa=0.7215 degrees ! Estimated noise=1.54883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.93535e-05 Jy ! Component: 100 - total flux cleaned = -8.89058e-05 Jy ! Component: 150 - total flux cleaned = -8.9342e-05 Jy ! Component: 200 - total flux cleaned = -0.000110237 Jy ! Total flux subtracted in 200 components = -0.000110237 Jy ! Clean residual min=-0.002898 max=0.003036 Jy/beam ! Clean residual mean=-0.000002 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0465138 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0465138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058509Jy sigma=0.437676 ! Fit after self-cal, rms=0.058565Jy sigma=0.437548 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.0489e-05 Jy ! Component: 100 - total flux cleaned = -7.26977e-05 Jy ! Component: 150 - total flux cleaned = -9.39871e-05 Jy ! Component: 200 - total flux cleaned = -0.000113657 Jy ! Total flux subtracted in 200 components = -0.000113657 Jy ! Clean residual min=-0.002876 max=0.002978 Jy/beam ! Clean residual mean=-0.000003 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0464002 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0464002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058547Jy sigma=0.437469 ! Fit after self-cal, rms=0.058551Jy sigma=0.437460 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058551Jy sigma=0.437460 ! Fit after self-cal, rms=0.058331Jy sigma=0.437436 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=9.878 mas, bpa=0.7811 degrees ! Estimated noise=1.54417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315159 Jy ! Component: 100 - total flux cleaned = 0.000314105 Jy ! Component: 150 - total flux cleaned = 0.000294094 Jy ! Component: 200 - total flux cleaned = 0.000293196 Jy ! Total flux subtracted in 200 components = 0.000293196 Jy ! Clean residual min=-0.002843 max=0.002950 Jy/beam ! Clean residual mean=-0.000003 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0466934 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0466934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058308Jy sigma=0.437345 ! Fit after self-cal, rms=0.058334Jy sigma=0.437323 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.57509e-05 Jy ! Component: 100 - total flux cleaned = -6.56231e-05 Jy ! Component: 150 - total flux cleaned = -8.41997e-05 Jy ! Component: 200 - total flux cleaned = -0.000119872 Jy ! Total flux subtracted in 200 components = -0.000119872 Jy ! Clean residual min=-0.002786 max=0.002901 Jy/beam ! Clean residual mean=-0.000003 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0465735 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0465735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058318Jy sigma=0.437252 ! Fit after self-cal, rms=0.058328Jy sigma=0.437240 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058328Jy sigma=0.437240 ! Fit after self-cal, rms=0.058015Jy sigma=0.437215 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.811 mas, bmaj=21.84 mas, bpa=-3.723 degrees ! Estimated noise=1.80016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411459 Jy ! Component: 100 - total flux cleaned = 0.000429273 Jy ! Component: 150 - total flux cleaned = 0.000437001 Jy ! Component: 200 - total flux cleaned = 0.00044409 Jy ! Total flux subtracted in 200 components = 0.00044409 Jy ! Clean residual min=-0.002296 max=0.002499 Jy/beam ! Clean residual mean=-0.000005 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.0470176 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0470176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058012Jy sigma=0.437177 ! Fit after self-cal, rms=0.058016Jy sigma=0.437164 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87162e-05 Jy ! Component: 100 - total flux cleaned = -4.0954e-05 Jy ! Component: 150 - total flux cleaned = -3.42016e-05 Jy ! Component: 200 - total flux cleaned = -3.4191e-05 Jy ! Total flux subtracted in 200 components = -3.4191e-05 Jy ! Clean residual min=-0.002308 max=0.002513 Jy/beam ! Clean residual mean=-0.000005 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0469834 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.0469834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058015Jy sigma=0.437148 ! Fit after self-cal, rms=0.058014Jy sigma=0.437146 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=9.778 mas, bpa=0.8546 degrees ! Estimated noise=1.5387 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.669 x 9.778 at 0.8546 degrees (North through East) ! Clean map min=-0.0026334 max=0.043651 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=8.083 mas, bpa=1.157 degrees ! Estimated noise=2.64717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322927 Jy ! Component: 100 - total flux cleaned = 0.0423394 Jy ! Component: 150 - total flux cleaned = 0.0462798 Jy ! Component: 200 - total flux cleaned = 0.0466413 Jy ! Total flux subtracted in 200 components = 0.0466413 Jy ! Clean residual min=-0.005105 max=0.005747 Jy/beam ! Clean residual mean=-0.000003 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.0466413 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0466413 Jy ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=9.778 mas, bpa=0.8546 degrees ! Estimated noise=1.5387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000850984 Jy ! Component: 100 - total flux cleaned = 0.00080834 Jy ! Component: 150 - total flux cleaned = 0.000738629 Jy ! Component: 200 - total flux cleaned = 0.000680995 Jy ! Total flux subtracted in 200 components = 0.000680995 Jy ! Clean residual min=-0.002857 max=0.003062 Jy/beam ! Clean residual mean=-0.000003 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0473223 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0473223 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.811 mas, bmaj=21.84 mas, bpa=-3.723 degrees ! Estimated noise=1.80016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014324 Jy ! Component: 100 - total flux cleaned = 0.000143281 Jy ! Component: 150 - total flux cleaned = 0.000134243 Jy ! Component: 200 - total flux cleaned = 0.000125305 Jy ! Total flux subtracted in 200 components = 0.000125305 Jy ! Clean residual min=-0.002224 max=0.002508 Jy/beam ! Clean residual mean=-0.000004 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0474476 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.11685e-06 Jy ! Component: 100 - total flux cleaned = -1.77186e-05 Jy ! Component: 150 - total flux cleaned = -2.62352e-05 Jy ! Component: 200 - total flux cleaned = -3.45814e-05 Jy ! Total flux subtracted in 200 components = -3.45814e-05 Jy ! Clean residual min=-0.002230 max=0.002508 Jy/beam ! Clean residual mean=-0.000004 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.047413 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.047413 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=9.778 mas, bpa=0.8546 degrees ! Estimated noise=1.5387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.9747e-05 Jy ! Component: 100 - total flux cleaned = -0.000140832 Jy ! Component: 150 - total flux cleaned = -0.000184266 Jy ! Component: 200 - total flux cleaned = -0.000205829 Jy ! Total flux subtracted in 200 components = -0.000205829 Jy ! Clean residual min=-0.002823 max=0.003001 Jy/beam ! Clean residual mean=-0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0472072 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0472072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058044Jy sigma=0.437346 ! Fit after self-cal, rms=0.058040Jy sigma=0.437306 wmodel J1341-1643_S_map.mod ! Writing 40 model components to file: J1341-1643_S_map.mod wobs J1341-1643_S_uvs.fits ! Writing UV FITS file: J1341-1643_S_uvs.fits wwins J1341-1643_S_map.win ! wwins: Wrote 1 windows to J1341-1643_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435203 Jy ! Component: 100 - total flux cleaned = 0.000298419 Jy ! Component: 150 - total flux cleaned = 0.000172096 Jy ! Component: 200 - total flux cleaned = 1.84498e-05 Jy ! Component: 250 - total flux cleaned = -0.000126635 Jy ! Component: 300 - total flux cleaned = -0.000231348 Jy ! Component: 350 - total flux cleaned = -0.000198965 Jy ! Component: 400 - total flux cleaned = -0.000230175 Jy ! Component: 450 - total flux cleaned = -0.000229245 Jy ! Component: 500 - total flux cleaned = -0.000371448 Jy ! Component: 550 - total flux cleaned = -0.000509149 Jy ! Component: 600 - total flux cleaned = -0.000642422 Jy ! Component: 650 - total flux cleaned = -0.000872795 Jy ! Component: 700 - total flux cleaned = -0.00107023 Jy ! Component: 750 - total flux cleaned = -0.00118988 Jy ! Component: 800 - total flux cleaned = -0.00142227 Jy ! Component: 850 - total flux cleaned = -0.00164729 Jy ! Component: 900 - total flux cleaned = -0.00186653 Jy ! Component: 950 - total flux cleaned = -0.00208025 Jy ! Component: 1000 - total flux cleaned = -0.00226815 Jy ! Component: 1050 - total flux cleaned = -0.00245168 Jy ! Component: 1100 - total flux cleaned = -0.00268989 Jy ! Component: 1150 - total flux cleaned = -0.00286419 Jy ! Component: 1200 - total flux cleaned = -0.0030537 Jy ! Component: 1250 - total flux cleaned = -0.00323873 Jy ! Component: 1300 - total flux cleaned = -0.00338415 Jy ! Component: 1350 - total flux cleaned = -0.00361517 Jy ! Component: 1400 - total flux cleaned = -0.00377152 Jy ! Component: 1450 - total flux cleaned = -0.00390789 Jy ! Component: 1500 - total flux cleaned = -0.00402476 Jy ! Component: 1550 - total flux cleaned = -0.00410688 Jy ! Component: 1600 - total flux cleaned = -0.00422004 Jy ! Component: 1650 - total flux cleaned = -0.00437859 Jy ! Component: 1700 - total flux cleaned = -0.00445621 Jy ! Component: 1750 - total flux cleaned = -0.00454839 Jy ! Component: 1800 - total flux cleaned = -0.00463905 Jy ! Component: 1850 - total flux cleaned = -0.00472861 Jy ! Component: 1900 - total flux cleaned = -0.00481676 Jy ! Component: 1950 - total flux cleaned = -0.00490358 Jy ! Component: 2000 - total flux cleaned = -0.00498926 Jy ! Component: 2050 - total flux cleaned = -0.0050317 Jy ! Component: 2100 - total flux cleaned = -0.00517122 Jy ! Component: 2150 - total flux cleaned = -0.00524008 Jy ! Component: 2200 - total flux cleaned = -0.00533544 Jy ! Component: 2250 - total flux cleaned = -0.00541618 Jy ! Component: 2300 - total flux cleaned = -0.00549599 Jy ! Component: 2350 - total flux cleaned = -0.00557507 Jy ! Component: 2400 - total flux cleaned = -0.00564035 Jy ! Component: 2450 - total flux cleaned = -0.00570492 Jy ! Component: 2500 - total flux cleaned = -0.00578169 Jy ! Component: 2550 - total flux cleaned = -0.00587042 Jy ! Component: 2600 - total flux cleaned = -0.00589552 Jy ! Component: 2650 - total flux cleaned = -0.00594547 Jy ! Component: 2700 - total flux cleaned = -0.00599499 Jy ! Component: 2750 - total flux cleaned = -0.00605631 Jy ! Component: 2800 - total flux cleaned = -0.00610489 Jy ! Component: 2850 - total flux cleaned = -0.00615311 Jy ! Component: 2900 - total flux cleaned = -0.0062011 Jy ! Component: 2950 - total flux cleaned = -0.00622492 Jy ! Component: 3000 - total flux cleaned = -0.00628418 Jy ! Component: 3050 - total flux cleaned = -0.00635473 Jy ! Component: 3100 - total flux cleaned = -0.00637812 Jy ! Component: 3150 - total flux cleaned = -0.00645942 Jy ! Component: 3200 - total flux cleaned = -0.00649404 Jy ! Component: 3250 - total flux cleaned = -0.00654003 Jy ! Component: 3300 - total flux cleaned = -0.00660866 Jy ! Component: 3350 - total flux cleaned = -0.00664285 Jy ! Component: 3400 - total flux cleaned = -0.00669954 Jy ! Component: 3450 - total flux cleaned = -0.00676726 Jy ! Component: 3500 - total flux cleaned = -0.00678982 Jy ! Component: 3550 - total flux cleaned = -0.00678978 Jy ! Component: 3600 - total flux cleaned = -0.0067898 Jy ! Component: 3650 - total flux cleaned = -0.006801 Jy ! Component: 3700 - total flux cleaned = -0.00680098 Jy ! Component: 3750 - total flux cleaned = -0.00678992 Jy ! Component: 3800 - total flux cleaned = -0.00677879 Jy ! Component: 3850 - total flux cleaned = -0.00675661 Jy ! Component: 3900 - total flux cleaned = -0.00674553 Jy ! Component: 3950 - total flux cleaned = -0.00671241 Jy ! Component: 4000 - total flux cleaned = -0.00671242 Jy ! Component: 4050 - total flux cleaned = -0.00669039 Jy ! Total flux subtracted in 4096 components = -0.00663547 Jy ! Clean residual min=-0.000607 max=0.000653 Jy/beam ! Clean residual mean=-0.000003 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0405717 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 288 components and 0.0405718 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1341-1643_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.669 x 9.778 at 0.8546 degrees (North through East) ! Clean map min=-0.0015708 max=0.041846 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1341-1643_S_map.fits wmodel /image_prod/ug002_uva//J1341-1643_S_map.mod ! Writing 288 model components to file: /image_prod/ug002_uva//J1341-1643_S_map.mod wobs /image_prod/ug002_uva//J1341-1643_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1341-1643_S_uvs.fits wwins /image_prod/ug002_uva//J1341-1643_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1341-1643_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0418459 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183574 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31607 1.31607 2.63214 5.26428 10.5286 21.0571 42.1142 84.2284 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.041 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 227.951 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1341-1643_S_dfm.log closed on Thu Mar 5 01:23:23 2020