! Started logfile: /image_prod/ug002_uva//J1339-2620_X_dfm.log on Thu Mar 5 01:22:12 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1339-2620_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1339-2620_X_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! AN table 2: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.977222 visibilities/baseline/integration-bin. ! Found source: J1339-2620 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21108 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1339-2620_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.043161Jy sigma=7.729774 ! Fit after self-cal, rms=0.736999Jy sigma=5.353477 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6508 mas, bmaj=2.114 mas, bpa=6.905 degrees ! Estimated noise=1.39971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198164 Jy ! Component: 100 - total flux cleaned = 0.255077 Jy ! Total flux subtracted in 100 components = 0.255077 Jy ! Clean residual min=-0.020493 max=0.057210 Jy/beam ! Clean residual mean=-0.000025 rms=0.005796 Jy/beam ! Combined flux in latest and established models = 0.255077 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.255077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136986Jy sigma=0.970493 ! Fit after self-cal, rms=0.136868Jy sigma=0.969521 ! Inverting map ! Added new window around map position (-1.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517338 Jy ! Component: 100 - total flux cleaned = 0.079436 Jy ! Total flux subtracted in 100 components = 0.079436 Jy ! Clean residual min=-0.017202 max=0.038451 Jy/beam ! Clean residual mean=-0.000014 rms=0.003969 Jy/beam ! Combined flux in latest and established models = 0.334513 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.334513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104196Jy sigma=0.729779 ! Fit after self-cal, rms=0.101003Jy sigma=0.703009 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257539 Jy ! Component: 100 - total flux cleaned = 0.041514 Jy ! Total flux subtracted in 100 components = 0.041514 Jy ! Clean residual min=-0.012860 max=0.024977 Jy/beam ! Clean residual mean=-0.000007 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.376027 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.376027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089233Jy sigma=0.616743 ! Fit after self-cal, rms=0.088170Jy sigma=0.606709 ! Inverting map ! Added new window around map position (-3, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207656 Jy ! Component: 100 - total flux cleaned = 0.0339472 Jy ! Total flux subtracted in 100 components = 0.0339472 Jy ! Clean residual min=-0.008749 max=0.017206 Jy/beam ! Clean residual mean=-0.000003 rms=0.002213 Jy/beam ! Combined flux in latest and established models = 0.409974 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.409974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080796Jy sigma=0.549160 ! Fit after self-cal, rms=0.080189Jy sigma=0.543067 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.542 mas, bpa=5.92 degrees ! Estimated noise=0.67422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173494 Jy ! Component: 100 - total flux cleaned = 0.02741 Jy ! Component: 150 - total flux cleaned = 0.0346167 Jy ! Component: 200 - total flux cleaned = 0.0398954 Jy ! Total flux subtracted in 200 components = 0.0398954 Jy ! Clean residual min=-0.007747 max=0.014345 Jy/beam ! Clean residual mean=0.000003 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.44987 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 91 components and 0.44987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075909Jy sigma=0.510683 ! Fit after self-cal, rms=0.075494Jy sigma=0.506283 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8502 x 2.542 at 5.92 degrees (North through East) ! Clean map min=-0.0071598 max=0.22867 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.35 KP 1.04 ! LA 0.98 MK 0.98 OV 1.03 PT 0.90 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.03 HN 0.97 KP 1.02 ! LA 0.98 NL 1.18 OV 1.02 PT 0.91 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 1.28 KP 1.04 ! LA 0.97 MK 0.98 OV 1.03 PT 0.90 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.01 HN 1.01 KP 1.03 ! LA 0.97 NL 1.21 OV 1.01 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.36 KP 1.04 ! LA 0.98 MK 0.95 OV 1.02 PT 0.92 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.01 HN 1.02 KP 1.02 ! LA 1.00 NL 1.14 OV 1.01 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 1.22 KP 1.02 ! LA 0.99 MK 0.99 OV 1.02 PT 0.88 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 1.02 HN 0.94 KP 1.01 ! LA 1.00 NL 1.15 OV 1.02 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.37 KP 1.04 ! LA 1.02 MK 0.97 OV 1.04 PT 0.91 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.03 HN 1.01 KP 1.02 ! LA 0.98 NL 1.21 OV 1.02 PT 0.93 ! SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.20 KP 1.04 ! LA 1.00 MK 1.02 OV 1.00 PT 0.91 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 1.00 KP 1.03 ! LA 0.99 NL 1.17 OV 1.01 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.34 KP 1.05 ! LA 1.00 MK 0.99 OV 1.01 PT 0.90 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.04 HN 0.95 KP 1.05 ! LA 0.99 NL 1.21 OV 1.01 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.34 KP 1.03 ! LA 0.99 MK 1.01 OV 1.01 PT 0.90 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.02 HN 0.95 KP 1.03 ! LA 1.01 NL 1.19 OV 1.03 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.27 KP 1.05 ! LA 1.00 MK 1.02 OV 1.05 PT 0.93 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.04 HN 0.96 KP 1.05 ! LA 0.98 NL 1.20 OV 1.02 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.34 KP 1.04 ! LA 1.01 MK 1.04 OV 1.03 PT 0.90 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.04 HN 1.03 KP 1.03 ! LA 0.99 NL 1.19 OV 1.02 PT 0.93 ! SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.35 KP 1.05 ! LA 1.01 MK 1.04 OV 1.06 PT 0.90 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.06 HN 0.99 KP 1.05 ! LA 1.00 NL 1.17 OV 1.05 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.28 KP 1.06 ! LA 1.00 MK 1.06 OV 1.07 PT 0.87 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.04 HN 1.03 KP 1.03 ! LA 1.00 NL 1.17 OV 1.03 PT 0.91 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.075494Jy sigma=0.506283 ! Fit after self-cal, rms=0.076498Jy sigma=0.475958 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8497 mas, bmaj=2.535 mas, bpa=6.317 degrees ! Estimated noise=0.68615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110664 Jy ! Component: 100 - total flux cleaned = 0.00205191 Jy ! Component: 150 - total flux cleaned = 0.00226633 Jy ! Component: 200 - total flux cleaned = 0.0024603 Jy ! Total flux subtracted in 200 components = 0.0024603 Jy ! Clean residual min=-0.004412 max=0.003809 Jy/beam ! Clean residual mean=0.000002 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.45233 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 0.45233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076046Jy sigma=0.472640 ! Fit after self-cal, rms=0.076036Jy sigma=0.472224 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076036Jy sigma=0.472224 ! Fit after self-cal, rms=0.076194Jy sigma=0.471972 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8486 mas, bmaj=2.532 mas, bpa=6.408 degrees ! Estimated noise=0.684159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202032 Jy ! Component: 100 - total flux cleaned = 9.31492e-05 Jy ! Component: 150 - total flux cleaned = 0.000253283 Jy ! Component: 200 - total flux cleaned = 0.000397726 Jy ! Total flux subtracted in 200 components = 0.000397726 Jy ! Clean residual min=-0.003802 max=0.003358 Jy/beam ! Clean residual mean=0.000002 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.452728 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 0.452728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075944Jy sigma=0.470417 ! Fit after self-cal, rms=0.075924Jy sigma=0.470227 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453946 Jy ! Component: 100 - total flux cleaned = 0.000591064 Jy ! Component: 150 - total flux cleaned = 0.000773427 Jy ! Component: 200 - total flux cleaned = 0.000827289 Jy ! Total flux subtracted in 200 components = 0.000827289 Jy ! Clean residual min=-0.003657 max=0.003133 Jy/beam ! Clean residual mean=0.000002 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.453555 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 0.453555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075797Jy sigma=0.469474 ! Fit after self-cal, rms=0.075787Jy sigma=0.469395 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075787Jy sigma=0.469395 ! Fit after self-cal, rms=0.076138Jy sigma=0.469132 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8477 mas, bmaj=2.53 mas, bpa=6.497 degrees ! Estimated noise=0.683503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000622827 Jy ! Component: 100 - total flux cleaned = -0.00062076 Jy ! Component: 150 - total flux cleaned = -0.000621737 Jy ! Component: 200 - total flux cleaned = -0.000568667 Jy ! Total flux subtracted in 200 components = -0.000568667 Jy ! Clean residual min=-0.003124 max=0.002842 Jy/beam ! Clean residual mean=0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.452986 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.452986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076019Jy sigma=0.468482 ! Fit after self-cal, rms=0.076015Jy sigma=0.468419 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.60008e-05 Jy ! Component: 100 - total flux cleaned = 2.96743e-05 Jy ! Component: 150 - total flux cleaned = -1.54768e-05 Jy ! Component: 200 - total flux cleaned = -5.73695e-05 Jy ! Total flux subtracted in 200 components = -5.73695e-05 Jy ! Clean residual min=-0.003000 max=0.002711 Jy/beam ! Clean residual mean=0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.452929 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 138 components and 0.452929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075952Jy sigma=0.468076 ! Fit after self-cal, rms=0.075949Jy sigma=0.468045 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075949Jy sigma=0.468045 ! Fit after self-cal, rms=0.076212Jy sigma=0.467904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=5.609 mas, bpa=5.92 degrees ! Estimated noise=0.858982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000734148 Jy ! Component: 100 - total flux cleaned = -0.000901634 Jy ! Component: 150 - total flux cleaned = -0.000984437 Jy ! Component: 200 - total flux cleaned = -0.00105669 Jy ! Total flux subtracted in 200 components = -0.00105669 Jy ! Clean residual min=-0.002399 max=0.003482 Jy/beam ! Clean residual mean=0.000003 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.451872 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 143 components and 0.451872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076183Jy sigma=0.467719 ! Fit after self-cal, rms=0.076180Jy sigma=0.467638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187018 Jy ! Component: 100 - total flux cleaned = 0.00272175 Jy ! Component: 150 - total flux cleaned = 0.00314423 Jy ! Component: 200 - total flux cleaned = 0.00352192 Jy ! Total flux subtracted in 200 components = 0.00352192 Jy ! Clean residual min=-0.001964 max=0.002138 Jy/beam ! Clean residual mean=0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.455394 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 173 components and 0.455394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076051Jy sigma=0.466939 ! Fit after self-cal, rms=0.076041Jy sigma=0.466886 ! Inverting map ! Added new window around map position (-11.8, -11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030476 Jy ! Component: 100 - total flux cleaned = 0.000296246 Jy ! Component: 150 - total flux cleaned = 0.000402418 Jy ! Component: 200 - total flux cleaned = 0.00059869 Jy ! Total flux subtracted in 200 components = 0.00059869 Jy ! Clean residual min=-0.001594 max=0.001491 Jy/beam ! Clean residual mean=0.000002 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.455993 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 192 components and 0.455993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075932Jy sigma=0.466468 ! Fit after self-cal, rms=0.075927Jy sigma=0.466446 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8472 mas, bmaj=2.529 mas, bpa=6.564 degrees ! Estimated noise=0.683166 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8472 x 2.529 at 6.564 degrees (North through East) ! Clean map min=-0.0027334 max=0.23073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6482 mas, bmaj=2.115 mas, bpa=7.592 degrees ! Estimated noise=1.41466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202346 Jy ! Component: 100 - total flux cleaned = 0.27252 Jy ! Component: 150 - total flux cleaned = 0.31116 Jy ! Component: 200 - total flux cleaned = 0.339048 Jy ! Total flux subtracted in 200 components = 0.339048 Jy ! Clean residual min=-0.008804 max=0.016149 Jy/beam ! Clean residual mean=-0.000015 rms=0.002663 Jy/beam ! Combined flux in latest and established models = 0.339048 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.339048 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8472 mas, bmaj=2.529 mas, bpa=6.564 degrees ! Estimated noise=0.683166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352573 Jy ! Component: 100 - total flux cleaned = 0.0573278 Jy ! Component: 150 - total flux cleaned = 0.0721651 Jy ! Component: 200 - total flux cleaned = 0.0825462 Jy ! Total flux subtracted in 200 components = 0.0825462 Jy ! Clean residual min=-0.003749 max=0.006481 Jy/beam ! Clean residual mean=-0.000007 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.421594 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 85 components and 0.421594 Jy ! Inverting map ! Added new window around map position (1, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766743 Jy ! Component: 100 - total flux cleaned = 0.0133702 Jy ! Component: 150 - total flux cleaned = 0.0177562 Jy ! Component: 200 - total flux cleaned = 0.0205514 Jy ! Total flux subtracted in 200 components = 0.0205514 Jy ! Clean residual min=-0.002841 max=0.003145 Jy/beam ! Clean residual mean=-0.000002 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.442146 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 142 components and 0.442146 Jy ! Inverting map ! Added new window around map position (16.8, 36.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286859 Jy ! Component: 100 - total flux cleaned = 0.00478931 Jy ! Component: 150 - total flux cleaned = 0.00649594 Jy ! Component: 200 - total flux cleaned = 0.00755106 Jy ! Total flux subtracted in 200 components = 0.00755106 Jy ! Clean residual min=-0.002342 max=0.002040 Jy/beam ! Clean residual mean=-0.000002 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.449697 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 177 components and 0.449697 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=5.609 mas, bpa=5.92 degrees ! Estimated noise=0.858982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252357 Jy ! Component: 100 - total flux cleaned = 0.00333383 Jy ! Component: 150 - total flux cleaned = 0.00401127 Jy ! Component: 200 - total flux cleaned = 0.0044874 Jy ! Total flux subtracted in 200 components = 0.0044874 Jy ! Clean residual min=-0.001992 max=0.001721 Jy/beam ! Clean residual mean=-0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.454184 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053922 Jy ! Component: 100 - total flux cleaned = 0.00088681 Jy ! Component: 150 - total flux cleaned = 0.00134973 Jy ! Component: 200 - total flux cleaned = 0.00160886 Jy ! Total flux subtracted in 200 components = 0.00160886 Jy ! Clean residual min=-0.001682 max=0.001530 Jy/beam ! Clean residual mean=-0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.455793 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 244 components and 0.455793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8472 mas, bmaj=2.529 mas, bpa=6.564 degrees ! Estimated noise=0.683166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471308 Jy ! Component: 100 - total flux cleaned = -0.000577161 Jy ! Component: 150 - total flux cleaned = -0.000432171 Jy ! Component: 200 - total flux cleaned = -0.000339284 Jy ! Total flux subtracted in 200 components = -0.000339284 Jy ! Clean residual min=-0.001775 max=0.001363 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.455454 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 275 components and 0.455454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075630Jy sigma=0.464761 ! Fit after self-cal, rms=0.075598Jy sigma=0.464618 wmodel J1339-2620_X_map.mod ! Writing 275 model components to file: J1339-2620_X_map.mod wobs J1339-2620_X_uvs.fits ! Writing UV FITS file: J1339-2620_X_uvs.fits wwins J1339-2620_X_map.win ! wwins: Wrote 8 windows to J1339-2620_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000509996 Jy ! Component: 100 - total flux cleaned = -0.000713413 Jy ! Component: 150 - total flux cleaned = -0.00104894 Jy ! Component: 200 - total flux cleaned = -0.00125566 Jy ! Component: 250 - total flux cleaned = -0.00145451 Jy ! Component: 300 - total flux cleaned = -0.00164671 Jy ! Component: 350 - total flux cleaned = -0.00183347 Jy ! Component: 400 - total flux cleaned = -0.00193457 Jy ! Component: 450 - total flux cleaned = -0.00211231 Jy ! Component: 500 - total flux cleaned = -0.00217056 Jy ! Component: 550 - total flux cleaned = -0.00234123 Jy ! Component: 600 - total flux cleaned = -0.00239672 Jy ! Component: 650 - total flux cleaned = -0.00246996 Jy ! Component: 700 - total flux cleaned = -0.00259548 Jy ! Component: 750 - total flux cleaned = -0.00264848 Jy ! Component: 800 - total flux cleaned = -0.00273533 Jy ! Component: 850 - total flux cleaned = -0.00278669 Jy ! Component: 900 - total flux cleaned = -0.00278646 Jy ! Component: 950 - total flux cleaned = -0.00291951 Jy ! Component: 1000 - total flux cleaned = -0.00295211 Jy ! Component: 1050 - total flux cleaned = -0.00306552 Jy ! Component: 1100 - total flux cleaned = -0.003161 Jy ! Component: 1150 - total flux cleaned = -0.00322378 Jy ! Component: 1200 - total flux cleaned = -0.00328636 Jy ! Component: 1250 - total flux cleaned = -0.00334803 Jy ! Component: 1300 - total flux cleaned = -0.00337861 Jy ! Component: 1350 - total flux cleaned = -0.00349926 Jy ! Component: 1400 - total flux cleaned = -0.00358829 Jy ! Component: 1450 - total flux cleaned = -0.00366199 Jy ! Component: 1500 - total flux cleaned = -0.00373485 Jy ! Component: 1550 - total flux cleaned = -0.00382153 Jy ! Component: 1600 - total flux cleaned = -0.00385015 Jy ! Component: 1650 - total flux cleaned = -0.00387837 Jy ! Component: 1700 - total flux cleaned = -0.00393433 Jy ! Component: 1750 - total flux cleaned = -0.00397586 Jy ! Component: 1800 - total flux cleaned = -0.003976 Jy ! Component: 1850 - total flux cleaned = -0.00405758 Jy ! Component: 1900 - total flux cleaned = -0.00412483 Jy ! Component: 1950 - total flux cleaned = -0.00417793 Jy ! Component: 2000 - total flux cleaned = -0.00419106 Jy ! Component: 2050 - total flux cleaned = -0.00420426 Jy ! Component: 2100 - total flux cleaned = -0.00423022 Jy ! Component: 2150 - total flux cleaned = -0.004269 Jy ! Component: 2200 - total flux cleaned = -0.00435842 Jy ! Component: 2250 - total flux cleaned = -0.00439645 Jy ! Component: 2300 - total flux cleaned = -0.00442164 Jy ! Component: 2350 - total flux cleaned = -0.00447142 Jy ! Component: 2400 - total flux cleaned = -0.00454534 Jy ! Component: 2450 - total flux cleaned = -0.00460647 Jy ! Component: 2500 - total flux cleaned = -0.00463071 Jy ! Component: 2550 - total flux cleaned = -0.00465467 Jy ! Component: 2600 - total flux cleaned = -0.00469051 Jy ! Component: 2650 - total flux cleaned = -0.00476164 Jy ! Component: 2700 - total flux cleaned = -0.00482066 Jy ! Component: 2750 - total flux cleaned = -0.00480891 Jy ! Component: 2800 - total flux cleaned = -0.00479756 Jy ! Component: 2850 - total flux cleaned = -0.00484372 Jy ! Component: 2900 - total flux cleaned = -0.00486669 Jy ! Component: 2950 - total flux cleaned = -0.00495759 Jy ! Component: 3000 - total flux cleaned = -0.00498005 Jy ! Component: 3050 - total flux cleaned = -0.00502474 Jy ! Component: 3100 - total flux cleaned = -0.00502463 Jy ! Component: 3150 - total flux cleaned = -0.00503566 Jy ! Component: 3200 - total flux cleaned = -0.00510148 Jy ! Component: 3250 - total flux cleaned = -0.00515597 Jy ! Component: 3300 - total flux cleaned = -0.00517752 Jy ! Component: 3350 - total flux cleaned = -0.00522046 Jy ! Component: 3400 - total flux cleaned = -0.00529512 Jy ! Component: 3450 - total flux cleaned = -0.00532701 Jy ! Component: 3500 - total flux cleaned = -0.00534815 Jy ! Component: 3550 - total flux cleaned = -0.00543189 Jy ! Component: 3600 - total flux cleaned = -0.00545277 Jy ! Component: 3650 - total flux cleaned = -0.00550435 Jy ! Component: 3700 - total flux cleaned = -0.0055556 Jy ! Component: 3750 - total flux cleaned = -0.00562689 Jy ! Component: 3800 - total flux cleaned = -0.00566739 Jy ! Component: 3850 - total flux cleaned = -0.00567751 Jy ! Component: 3900 - total flux cleaned = -0.00575761 Jy ! Component: 3950 - total flux cleaned = -0.00576765 Jy ! Component: 4000 - total flux cleaned = -0.0058566 Jy ! Component: 4050 - total flux cleaned = -0.00590578 Jy ! Total flux subtracted in 4096 components = -0.00590574 Jy ! Clean residual min=-0.000580 max=0.000556 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.449548 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 556 components and 0.449548 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1339-2620_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8472 x 2.529 at 6.564 degrees (North through East) ! Clean map min=-0.0015167 max=0.23848 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1339-2620_X_map.fits wmodel /image_prod/ug002_uva//J1339-2620_X_map.mod ! Writing 556 model components to file: /image_prod/ug002_uva//J1339-2620_X_map.mod wobs /image_prod/ug002_uva//J1339-2620_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1339-2620_X_uvs.fits wwins /image_prod/ug002_uva//J1339-2620_X_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1339-2620_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.238483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169334 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.213015 0.213015 0.426029 0.852058 1.70412 3.40823 6.81646 13.6329 27.2659 54.5317 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.238 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1408.35 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1339-2620_X_dfm.log closed on Thu Mar 5 01:22:17 2020