! Started logfile: /image_prod/ug002_uva//J1339-0637_X_a_dfm.log on Thu Mar  5 01:21:37 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1339-0637_X_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1339-0637_X_a_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.918827 visibilities/baseline/integration-bin.
! Found source: J1339-0637
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 35724 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1339-0637_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003625Jy  sigma=9.166789
! Fit after  self-cal, rms=0.915181Jy  sigma=8.359908
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7689 mas, bmaj=3.63 mas, bpa=-16.03 degrees
! Estimated noise=0.790977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.063192 Jy
! Component: 100  -  total flux cleaned = 0.0779744 Jy
! Total flux subtracted in 100 components = 0.0779744 Jy
! Clean residual min=-0.004014 max=0.013317 Jy/beam
! Clean residual mean=0.000007 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.0779745 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0779745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063743Jy  sigma=0.544723
! Fit after  self-cal, rms=0.063571Jy  sigma=0.543327
! Inverting map 
! Added new window around map position (-1.8, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119665 Jy
! Component: 100  -  total flux cleaned = 0.0189403 Jy
! Total flux subtracted in 100 components = 0.0189403 Jy
! Clean residual min=-0.003312 max=0.004854 Jy/beam
! Clean residual mean=0.000005 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.0969147 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 33 components and 0.0969147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060308Jy  sigma=0.512606
! Fit after  self-cal, rms=0.060076Jy  sigma=0.510414
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00600539 Jy
! Component: 100  -  total flux cleaned = 0.00996687 Jy
! Total flux subtracted in 100 components = 0.00996687 Jy
! Clean residual min=-0.002861 max=0.003101 Jy/beam
! Clean residual mean=0.000003 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.106882 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 42 components and 0.106882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059112Jy  sigma=0.501472
! Fit after  self-cal, rms=0.059070Jy  sigma=0.501064
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=3.788 mas, bpa=-14.89 degrees
! Estimated noise=0.415383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499703 Jy
! Component: 100  -  total flux cleaned = 0.00814104 Jy
! Component: 150  -  total flux cleaned = 0.0103576 Jy
! Component: 200  -  total flux cleaned = 0.0119735 Jy
! Total flux subtracted in 200 components = 0.0119735 Jy
! Clean residual min=-0.002421 max=0.002617 Jy/beam
! Clean residual mean=0.000006 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.118855 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 75 components and 0.118855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058564Jy  sigma=0.496550
! Fit after  self-cal, rms=0.058548Jy  sigma=0.496334
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.023 x 3.788 at -14.89 degrees (North through East)
! Clean map  min=-0.0023025  max=0.082972 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        1.04     
!   LA        1.00     MK        1.02     NL        1.07     OV        0.95     
!   PT        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.03     KP        1.06     
!   LA        1.00     MK        1.05     NL        1.08     OV        0.91     
!   PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.03     KP        1.05     
!   LA        0.97     MK        1.03     NL        1.10     OV        0.96     
!   PT        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.04     KP        1.07     
!   LA        0.97     MK        1.04     NL        1.12     OV        0.95     
!   PT        0.88     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.04     KP        1.02     
!   LA        1.00     MK        1.02     NL        1.11     OV        0.95     
!   PT        0.90     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        1.06     
!   LA        1.00     MK        1.00     NL        1.11     OV        0.91     
!   PT        0.89     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.12     KP        1.05     
!   LA        0.99     MK        1.03     NL        1.07     OV        0.94     
!   PT        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.06     KP        1.06     
!   LA        1.00     MK        1.01     NL        1.11     OV        0.98     
!   PT        0.88     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.00     KP        1.05     
!   LA        1.00     MK        0.99     NL        1.09     OV        0.95     
!   PT        0.88     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.05     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.07     OV        0.94     
!   PT        0.90     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        1.04     
!   LA        1.00     MK        1.00     NL        1.06     OV        0.93     
!   PT        0.89     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.96     KP        1.09     
!   LA        0.99     MK        0.98     NL        1.11     OV        0.90     
!   PT        0.89     
! 
! 
! Fit before self-cal, rms=0.058548Jy  sigma=0.496334
! Fit after  self-cal, rms=0.057501Jy  sigma=0.491491
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=3.771 mas, bpa=-14.79 degrees
! Estimated noise=0.413893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010164 Jy
! Component: 100  -  total flux cleaned = 0.00153455 Jy
! Component: 150  -  total flux cleaned = 0.00194081 Jy
! Component: 200  -  total flux cleaned = 0.00201201 Jy
! Total flux subtracted in 200 components = 0.00201201 Jy
! Clean residual min=-0.001145 max=0.001246 Jy/beam
! Clean residual mean=0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.120867 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 110 components and 0.120867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057400Jy  sigma=0.490518
! Fit after  self-cal, rms=0.057403Jy  sigma=0.490345
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057403Jy  sigma=0.490345
! Fit after  self-cal, rms=0.057395Jy  sigma=0.489048
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=3.775 mas, bpa=-14.81 degrees
! Estimated noise=0.41208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000753635 Jy
! Component: 100  -  total flux cleaned = 0.000918664 Jy
! Component: 150  -  total flux cleaned = 0.000864894 Jy
! Component: 200  -  total flux cleaned = 0.00086334 Jy
! Total flux subtracted in 200 components = 0.00086334 Jy
! Clean residual min=-0.000825 max=0.000894 Jy/beam
! Clean residual mean=0.000000 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.121731 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 133 components and 0.121731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057362Jy  sigma=0.488723
! Fit after  self-cal, rms=0.057371Jy  sigma=0.488670
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026491 Jy
! Component: 100  -  total flux cleaned = 0.000283018 Jy
! Component: 150  -  total flux cleaned = 0.000280989 Jy
! Component: 200  -  total flux cleaned = 0.000326205 Jy
! Total flux subtracted in 200 components = 0.000326205 Jy
! Clean residual min=-0.000819 max=0.000878 Jy/beam
! Clean residual mean=0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.122057 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 149 components and 0.122057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057360Jy  sigma=0.488569
! Fit after  self-cal, rms=0.057359Jy  sigma=0.488562
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057359Jy  sigma=0.488562
! Fit after  self-cal, rms=0.057329Jy  sigma=0.488502
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=3.769 mas, bpa=-14.8 degrees
! Estimated noise=0.411302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02162e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123127 Jy
! Component: 150  -  total flux cleaned = 0.000200796 Jy
! Component: 200  -  total flux cleaned = 0.000200296 Jy
! Total flux subtracted in 200 components = 0.000200296 Jy
! Clean residual min=-0.000768 max=0.000860 Jy/beam
! Clean residual mean=0.000000 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.122257 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 162 components and 0.122257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057319Jy  sigma=0.488408
! Fit after  self-cal, rms=0.057322Jy  sigma=0.488403
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.20447e-05 Jy
! Component: 100  -  total flux cleaned = 5.46706e-05 Jy
! Component: 150  -  total flux cleaned = 5.46464e-05 Jy
! Component: 200  -  total flux cleaned = 6.45488e-05 Jy
! Total flux subtracted in 200 components = 6.45488e-05 Jy
! Clean residual min=-0.000766 max=0.000835 Jy/beam
! Clean residual mean=0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.122322 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 176 components and 0.122322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057318Jy  sigma=0.488365
! Fit after  self-cal, rms=0.057317Jy  sigma=0.488364
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057317Jy  sigma=0.488364
! Fit after  self-cal, rms=0.057290Jy  sigma=0.488338
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.295 mas, bmaj=4.198 mas, bpa=-3.199 degrees
! Estimated noise=0.474273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014369 Jy
! Component: 100  -  total flux cleaned = 0.00022221 Jy
! Component: 150  -  total flux cleaned = 0.000252134 Jy
! Component: 200  -  total flux cleaned = 0.000268586 Jy
! Total flux subtracted in 200 components = 0.000268586 Jy
! Clean residual min=-0.000751 max=0.000796 Jy/beam
! Clean residual mean=-0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.12259 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 196 components and 0.12259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057287Jy  sigma=0.488307
! Fit after  self-cal, rms=0.057288Jy  sigma=0.488303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.67016e-05 Jy
! Component: 100  -  total flux cleaned = 5.97231e-05 Jy
! Component: 150  -  total flux cleaned = 5.98839e-05 Jy
! Component: 200  -  total flux cleaned = 5.97755e-05 Jy
! Total flux subtracted in 200 components = 5.97755e-05 Jy
! Clean residual min=-0.000756 max=0.000752 Jy/beam
! Clean residual mean=-0.000000 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.12265 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 205 components and 0.12265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057288Jy  sigma=0.488296
! Fit after  self-cal, rms=0.057287Jy  sigma=0.488295
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=3.762 mas, bpa=-14.78 degrees
! Estimated noise=0.410808 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.037 x 3.762 at -14.78 degrees (North through East)
! Clean map  min=-0.00070838  max=0.082618 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7781 mas, bmaj=3.596 mas, bpa=-15.98 degrees
! Estimated noise=0.791104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628139 Jy
! Component: 100  -  total flux cleaned = 0.0819169 Jy
! Component: 150  -  total flux cleaned = 0.0922407 Jy
! Component: 200  -  total flux cleaned = 0.0991732 Jy
! Total flux subtracted in 200 components = 0.0991732 Jy
! Clean residual min=-0.002281 max=0.003774 Jy/beam
! Clean residual mean=0.000003 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0991732 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0991732 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=3.762 mas, bpa=-14.78 degrees
! Estimated noise=0.410808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681208 Jy
! Component: 100  -  total flux cleaned = 0.0108033 Jy
! Component: 150  -  total flux cleaned = 0.0135854 Jy
! Component: 200  -  total flux cleaned = 0.0156507 Jy
! Total flux subtracted in 200 components = 0.0156507 Jy
! Clean residual min=-0.001053 max=0.001344 Jy/beam
! Clean residual mean=0.000003 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.114824 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 67 components and 0.114824 Jy
! Inverting map 
! Added new window around map position (-17.2, 18.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160952 Jy
! Component: 100  -  total flux cleaned = 0.00286535 Jy
! Component: 150  -  total flux cleaned = 0.00387095 Jy
! Component: 200  -  total flux cleaned = 0.00468743 Jy
! Total flux subtracted in 200 components = 0.00468743 Jy
! Clean residual min=-0.000890 max=0.000814 Jy/beam
! Clean residual mean=0.000001 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.119511 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 95 components and 0.119511 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.295 mas, bmaj=4.198 mas, bpa=-3.199 degrees
! Estimated noise=0.474273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000997221 Jy
! Component: 100  -  total flux cleaned = 0.00155175 Jy
! Component: 150  -  total flux cleaned = 0.00188423 Jy
! Component: 200  -  total flux cleaned = 0.00206555 Jy
! Total flux subtracted in 200 components = 0.00206555 Jy
! Clean residual min=-0.000820 max=0.000788 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.121577 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122876 Jy
! Component: 100  -  total flux cleaned = 0.000231776 Jy
! Component: 150  -  total flux cleaned = 0.000327473 Jy
! Component: 200  -  total flux cleaned = 0.000400816 Jy
! Total flux subtracted in 200 components = 0.000400816 Jy
! Clean residual min=-0.000775 max=0.000730 Jy/beam
! Clean residual mean=0.000000 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.121978 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 148 components and 0.121978 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=3.762 mas, bpa=-14.78 degrees
! Estimated noise=0.410808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.34398e-07 Jy
! Component: 100  -  total flux cleaned = -1.46765e-05 Jy
! Component: 150  -  total flux cleaned = 9.86387e-06 Jy
! Component: 200  -  total flux cleaned = 9.654e-06 Jy
! Total flux subtracted in 200 components = 9.654e-06 Jy
! Clean residual min=-0.000782 max=0.000716 Jy/beam
! Clean residual mean=0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.121987 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 170 components and 0.121987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057277Jy  sigma=0.488218
! Fit after  self-cal, rms=0.057274Jy  sigma=0.488197
wmodel J1339-0637_X_a_map.mod
! Writing 170 model components to file: J1339-0637_X_a_map.mod
wobs   J1339-0637_X_a_uvs.fits
! Writing UV FITS file: J1339-0637_X_a_uvs.fits
wwins  J1339-0637_X_a_map.win
! wwins: Wrote 4 windows to J1339-0637_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.42824e-05 Jy
! Component: 100  -  total flux cleaned = 4.97351e-05 Jy
! Component: 150  -  total flux cleaned = 3.7535e-05 Jy
! Component: 200  -  total flux cleaned = 2.58465e-05 Jy
! Component: 250  -  total flux cleaned = 1.47236e-05 Jy
! Component: 300  -  total flux cleaned = -7.09474e-06 Jy
! Component: 350  -  total flux cleaned = -6.99744e-06 Jy
! Component: 400  -  total flux cleaned = -1.78158e-05 Jy
! Component: 450  -  total flux cleaned = -3.88376e-05 Jy
! Component: 500  -  total flux cleaned = -5.93411e-05 Jy
! Component: 550  -  total flux cleaned = -4.91314e-05 Jy
! Component: 600  -  total flux cleaned = -6.91736e-05 Jy
! Component: 650  -  total flux cleaned = -9.8696e-05 Jy
! Component: 700  -  total flux cleaned = -9.85109e-05 Jy
! Component: 750  -  total flux cleaned = -9.85809e-05 Jy
! Component: 800  -  total flux cleaned = -0.000126821 Jy
! Component: 850  -  total flux cleaned = -0.000145109 Jy
! Component: 900  -  total flux cleaned = -0.000144931 Jy
! Component: 950  -  total flux cleaned = -0.000144906 Jy
! Component: 1000  -  total flux cleaned = -0.00016268 Jy
! Component: 1050  -  total flux cleaned = -0.000162825 Jy
! Component: 1100  -  total flux cleaned = -0.000163024 Jy
! Component: 1150  -  total flux cleaned = -0.000197471 Jy
! Component: 1200  -  total flux cleaned = -0.000205877 Jy
! Component: 1250  -  total flux cleaned = -0.000231163 Jy
! Component: 1300  -  total flux cleaned = -0.000264242 Jy
! Component: 1350  -  total flux cleaned = -0.000247823 Jy
! Component: 1400  -  total flux cleaned = -0.000280259 Jy
! Component: 1450  -  total flux cleaned = -0.000296126 Jy
! Component: 1500  -  total flux cleaned = -0.000280104 Jy
! Component: 1550  -  total flux cleaned = -0.00026435 Jy
! Component: 1600  -  total flux cleaned = -0.000303296 Jy
! Component: 1650  -  total flux cleaned = -0.000295533 Jy
! Component: 1700  -  total flux cleaned = -0.000341293 Jy
! Component: 1750  -  total flux cleaned = -0.00033366 Jy
! Component: 1800  -  total flux cleaned = -0.000318622 Jy
! Component: 1850  -  total flux cleaned = -0.000311262 Jy
! Component: 1900  -  total flux cleaned = -0.000318713 Jy
! Component: 1950  -  total flux cleaned = -0.000333307 Jy
! Component: 2000  -  total flux cleaned = -0.000354997 Jy
! Component: 2050  -  total flux cleaned = -0.000319037 Jy
! Component: 2100  -  total flux cleaned = -0.000333155 Jy
! Component: 2150  -  total flux cleaned = -0.000290747 Jy
! Component: 2200  -  total flux cleaned = -0.000283731 Jy
! Component: 2250  -  total flux cleaned = -0.000241902 Jy
! Component: 2300  -  total flux cleaned = -0.000235077 Jy
! Component: 2350  -  total flux cleaned = -0.000200781 Jy
! Component: 2400  -  total flux cleaned = -0.000214404 Jy
! Component: 2450  -  total flux cleaned = -0.000200883 Jy
! Component: 2500  -  total flux cleaned = -0.00016726 Jy
! Component: 2550  -  total flux cleaned = -0.000167226 Jy
! Component: 2600  -  total flux cleaned = -0.000127436 Jy
! Component: 2650  -  total flux cleaned = -0.000120895 Jy
! Component: 2700  -  total flux cleaned = -0.00010126 Jy
! Component: 2750  -  total flux cleaned = -9.47745e-05 Jy
! Component: 2800  -  total flux cleaned = -7.5429e-05 Jy
! Component: 2850  -  total flux cleaned = -6.90298e-05 Jy
! Component: 2900  -  total flux cleaned = -4.99434e-05 Jy
! Component: 2950  -  total flux cleaned = -4.36595e-05 Jy
! Component: 3000  -  total flux cleaned = -4.98901e-05 Jy
! Component: 3050  -  total flux cleaned = -3.11562e-05 Jy
! Component: 3100  -  total flux cleaned = -3.11309e-05 Jy
! Component: 3150  -  total flux cleaned = 1.21644e-05 Jy
! Component: 3200  -  total flux cleaned = 1.21201e-05 Jy
! Component: 3250  -  total flux cleaned = 1.82641e-05 Jy
! Component: 3300  -  total flux cleaned = 2.43367e-05 Jy
! Component: 3350  -  total flux cleaned = 1.82516e-05 Jy
! Component: 3400  -  total flux cleaned = 2.72124e-07 Jy
! Component: 3450  -  total flux cleaned = 4.79635e-05 Jy
! Component: 3500  -  total flux cleaned = 5.98458e-05 Jy
! Component: 3550  -  total flux cleaned = 4.21304e-05 Jy
! Component: 3600  -  total flux cleaned = 2.46237e-05 Jy
! Component: 3650  -  total flux cleaned = 4.20392e-05 Jy
! Component: 3700  -  total flux cleaned = 5.94231e-05 Jy
! Component: 3750  -  total flux cleaned = 5.3687e-05 Jy
! Component: 3800  -  total flux cleaned = 5.94416e-05 Jy
! Component: 3850  -  total flux cleaned = 3.663e-05 Jy
! Component: 3900  -  total flux cleaned = 3.66643e-05 Jy
! Component: 3950  -  total flux cleaned = 4.79231e-05 Jy
! Component: 4000  -  total flux cleaned = 1.99356e-05 Jy
! Component: 4050  -  total flux cleaned = 2.5478e-05 Jy
! Total flux subtracted in 4096 components = 2.54613e-05 Jy
! Clean residual min=-0.000294 max=0.000407 Jy/beam
! Clean residual mean=0.000000 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.122013 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 483 components and 0.122013 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1339-0637_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.037 x 3.762 at -14.78 degrees (North through East)
! Clean map  min=-0.00053343  max=0.083065 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1339-0637_X_a_map.fits
wmodel /image_prod/ug002_uva//J1339-0637_X_a_map.mod
! Writing 483 model components to file: /image_prod/ug002_uva//J1339-0637_X_a_map.mod
wobs   /image_prod/ug002_uva//J1339-0637_X_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1339-0637_X_a_uvs.fits
wwins  /image_prod/ug002_uva//J1339-0637_X_a_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1339-0637_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0830645 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00010458 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.377706 0.377706 0.755412 1.51082 3.02165 6.04329 12.0866 24.1732 48.3463 96.6927
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  794.268 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1339-0637_X_a_dfm.log closed on Thu Mar  5 01:21:42 2020