! Started logfile: /image_prod/ug002_uva//J1337-1257_X_i_dfm.log on Thu Mar  5 01:21:08 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1337-1257_X_i_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1337-1257_X_i_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.790476 visibilities/baseline/integration-bin.
! Found source: J1337-1257
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5976 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1337-1257_X_i]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.738240Jy  sigma=7.508028
! Fit after  self-cal, rms=1.562756Jy  sigma=4.211845
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6616 mas, bmaj=1.565 mas, bpa=2.08 degrees
! Estimated noise=4.74472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84 Jy
! Component: 100  -  total flux cleaned = 2.2732 Jy
! Total flux subtracted in 100 components = 2.2732 Jy
! Clean residual min=-0.068717 max=0.170612 Jy/beam
! Clean residual mean=0.000107 rms=0.017917 Jy/beam
! Combined flux in latest and established models = 2.2732 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 2.2732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.455820Jy  sigma=1.156239
! Fit after  self-cal, rms=0.455473Jy  sigma=1.155225
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.18362 Jy
! Component: 100  -  total flux cleaned = 0.279088 Jy
! Total flux subtracted in 100 components = 0.279088 Jy
! Clean residual min=-0.053762 max=0.122053 Jy/beam
! Clean residual mean=0.000099 rms=0.012465 Jy/beam
! Combined flux in latest and established models = 2.55229 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 2.55229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.308732Jy  sigma=0.781432
! Fit after  self-cal, rms=0.308393Jy  sigma=0.780277
! Inverting map 
! Added new window around map position (1.6, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106121 Jy
! Component: 100  -  total flux cleaned = 0.170932 Jy
! Total flux subtracted in 100 components = 0.170932 Jy
! Clean residual min=-0.044415 max=0.089972 Jy/beam
! Clean residual mean=0.000071 rms=0.009689 Jy/beam
! Combined flux in latest and established models = 2.72322 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 2.72322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.239117Jy  sigma=0.609452
! Fit after  self-cal, rms=0.234698Jy  sigma=0.597133
! Inverting map 
! Added new window around map position (1.6, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0818825 Jy
! Component: 100  -  total flux cleaned = 0.129666 Jy
! Total flux subtracted in 100 components = 0.129666 Jy
! Clean residual min=-0.034712 max=0.050217 Jy/beam
! Clean residual mean=0.000047 rms=0.007222 Jy/beam
! Combined flux in latest and established models = 2.85289 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 29 components and 2.85289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.187950Jy  sigma=0.484970
! Fit after  self-cal, rms=0.185016Jy  sigma=0.475871
! Inverting map 
! Added new window around map position (-0.8, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0470314 Jy
! Component: 100  -  total flux cleaned = 0.079529 Jy
! Total flux subtracted in 100 components = 0.079529 Jy
! Clean residual min=-0.029261 max=0.034068 Jy/beam
! Clean residual mean=0.000041 rms=0.006073 Jy/beam
! Combined flux in latest and established models = 2.93242 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 2.93242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.163104Jy  sigma=0.426137
! Fit after  self-cal, rms=0.162669Jy  sigma=0.424050
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8175 mas, bmaj=1.884 mas, bpa=3.595 degrees
! Estimated noise=3.44734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0431786 Jy
! Component: 100  -  total flux cleaned = 0.0722634 Jy
! Component: 150  -  total flux cleaned = 0.0938284 Jy
! Component: 200  -  total flux cleaned = 0.110121 Jy
! Total flux subtracted in 200 components = 0.110121 Jy
! Clean residual min=-0.028385 max=0.033552 Jy/beam
! Clean residual mean=0.000001 rms=0.006954 Jy/beam
! Combined flux in latest and established models = 3.04254 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 51 components and 3.04254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.145038Jy  sigma=0.385215
! Fit after  self-cal, rms=0.144487Jy  sigma=0.382958
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8175 x 1.884 at 3.595 degrees (North through East)
! Clean map  min=-0.026824  max=2.4114 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.08     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.08     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.07     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.06     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.97     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.09     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.07     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.95     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.06     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.97     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.07     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.18     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.95     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.06     OV        1.00     
!   PT        0.94     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.144487Jy  sigma=0.382958
! Fit after  self-cal, rms=0.097980Jy  sigma=0.261758
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.819 mas, bmaj=1.892 mas, bpa=3.693 degrees
! Estimated noise=3.44727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00848252 Jy
! Component: 100  -  total flux cleaned = -0.0113693 Jy
! Component: 150  -  total flux cleaned = -0.013547 Jy
! Component: 200  -  total flux cleaned = -0.0141856 Jy
! Total flux subtracted in 200 components = -0.0141856 Jy
! Clean residual min=-0.012519 max=0.014399 Jy/beam
! Clean residual mean=-0.000007 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 3.02835 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 3.02835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093669Jy  sigma=0.250172
! Fit after  self-cal, rms=0.093262Jy  sigma=0.249254
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093262Jy  sigma=0.249254
! Fit after  self-cal, rms=0.087575Jy  sigma=0.234201
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8195 mas, bmaj=1.894 mas, bpa=3.701 degrees
! Estimated noise=3.44876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00656741 Jy
! Component: 100  -  total flux cleaned = -0.00847753 Jy
! Component: 150  -  total flux cleaned = -0.00927566 Jy
! Component: 200  -  total flux cleaned = -0.00949501 Jy
! Total flux subtracted in 200 components = -0.00949501 Jy
! Clean residual min=-0.010599 max=0.010508 Jy/beam
! Clean residual mean=-0.000003 rms=0.002250 Jy/beam
! Combined flux in latest and established models = 3.01886 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 3.01886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085093Jy  sigma=0.227588
! Fit after  self-cal, rms=0.084777Jy  sigma=0.226949
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729881 Jy
! Component: 100  -  total flux cleaned = 0.0067992 Jy
! Component: 150  -  total flux cleaned = 0.00680946 Jy
! Component: 200  -  total flux cleaned = 0.00662748 Jy
! Total flux subtracted in 200 components = 0.00662748 Jy
! Clean residual min=-0.009938 max=0.010143 Jy/beam
! Clean residual mean=-0.000005 rms=0.002044 Jy/beam
! Combined flux in latest and established models = 3.02549 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 3.02549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083350Jy  sigma=0.223033
! Fit after  self-cal, rms=0.083249Jy  sigma=0.222801
! Inverting map 
! Added new window around map position (-4.4, 6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00837698 Jy
! Component: 100  -  total flux cleaned = 0.00924261 Jy
! Component: 150  -  total flux cleaned = 0.00982529 Jy
! Component: 200  -  total flux cleaned = 0.010358 Jy
! Total flux subtracted in 200 components = 0.010358 Jy
! Clean residual min=-0.009457 max=0.009656 Jy/beam
! Clean residual mean=-0.000010 rms=0.001891 Jy/beam
! Combined flux in latest and established models = 3.03584 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 111 components and 3.03584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081873Jy  sigma=0.219340
! Fit after  self-cal, rms=0.081807Jy  sigma=0.219203
! Inverting map 
! Added new window around map position (0, -13.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0058068 Jy
! Component: 100  -  total flux cleaned = 0.00741307 Jy
! Component: 150  -  total flux cleaned = 0.00898168 Jy
! Component: 200  -  total flux cleaned = 0.00960969 Jy
! Total flux subtracted in 200 components = 0.00960969 Jy
! Clean residual min=-0.008389 max=0.007996 Jy/beam
! Clean residual mean=-0.000009 rms=0.001758 Jy/beam
! Combined flux in latest and established models = 3.04545 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 3.04545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080670Jy  sigma=0.216287
! Fit after  self-cal, rms=0.080601Jy  sigma=0.216109
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080601Jy  sigma=0.216109
! Fit after  self-cal, rms=0.079648Jy  sigma=0.213891
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8194 mas, bmaj=1.895 mas, bpa=3.702 degrees
! Estimated noise=3.4457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00338071 Jy
! Component: 100  -  total flux cleaned = -0.00322318 Jy
! Component: 150  -  total flux cleaned = -0.00322699 Jy
! Component: 200  -  total flux cleaned = -0.00367036 Jy
! Total flux subtracted in 200 components = -0.00367036 Jy
! Clean residual min=-0.007463 max=0.007257 Jy/beam
! Clean residual mean=-0.000007 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 3.04178 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 130 components and 3.04178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078787Jy  sigma=0.211607
! Fit after  self-cal, rms=0.078715Jy  sigma=0.211476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00091154 Jy
! Component: 100  -  total flux cleaned = -0.00145102 Jy
! Component: 150  -  total flux cleaned = -0.00169868 Jy
! Component: 200  -  total flux cleaned = -0.00181206 Jy
! Total flux subtracted in 200 components = -0.00181206 Jy
! Clean residual min=-0.007167 max=0.006882 Jy/beam
! Clean residual mean=-0.000007 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 3.03997 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 138 components and 3.03997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078343Jy  sigma=0.210461
! Fit after  self-cal, rms=0.078318Jy  sigma=0.210430
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078318Jy  sigma=0.210430
! Fit after  self-cal, rms=0.078083Jy  sigma=0.209869
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.126 mas, bmaj=3.992 mas, bpa=9.743 degrees
! Estimated noise=4.85142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00306811 Jy
! Component: 100  -  total flux cleaned = -0.00412485 Jy
! Component: 150  -  total flux cleaned = -0.00485117 Jy
! Component: 200  -  total flux cleaned = -0.00556777 Jy
! Total flux subtracted in 200 components = -0.00556777 Jy
! Clean residual min=-0.007228 max=0.006260 Jy/beam
! Clean residual mean=-0.000014 rms=0.001809 Jy/beam
! Combined flux in latest and established models = 3.0344 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 150 components and 3.0344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077880Jy  sigma=0.209616
! Fit after  self-cal, rms=0.077878Jy  sigma=0.209545
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.12456e-05 Jy
! Component: 100  -  total flux cleaned = -0.000256843 Jy
! Component: 150  -  total flux cleaned = -0.000339464 Jy
! Component: 200  -  total flux cleaned = -0.000339469 Jy
! Total flux subtracted in 200 components = -0.000339469 Jy
! Clean residual min=-0.007107 max=0.006249 Jy/beam
! Clean residual mean=-0.000012 rms=0.001785 Jy/beam
! Combined flux in latest and established models = 3.03407 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 158 components and 3.03407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077820Jy  sigma=0.209495
! Fit after  self-cal, rms=0.077824Jy  sigma=0.209477
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8194 mas, bmaj=1.896 mas, bpa=3.702 degrees
! Estimated noise=3.44391 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8194 x 1.896 at 3.702 degrees (North through East)
! Clean map  min=-0.0086367  max=2.4094 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077824Jy  sigma=0.209477
! Fit after  self-cal, rms=0.073120Jy  sigma=0.189452
! Inverting map and beam 
! Estimated beam: bmin=0.8195 mas, bmaj=1.896 mas, bpa=3.735 degrees
! Estimated noise=3.44433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00361602 Jy
! Component: 100  -  total flux cleaned = -0.00524792 Jy
! Component: 150  -  total flux cleaned = -0.00608732 Jy
! Component: 200  -  total flux cleaned = -0.00674044 Jy
! Total flux subtracted in 200 components = -0.00674044 Jy
! Clean residual min=-0.006603 max=0.006036 Jy/beam
! Clean residual mean=-0.000005 rms=0.001273 Jy/beam
! Combined flux in latest and established models = 3.02733 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 165 components and 3.02733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072668Jy  sigma=0.188140
! Fit after  self-cal, rms=0.072625Jy  sigma=0.188081
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00145 Jy
! Component: 100  -  total flux cleaned = -0.00193459 Jy
! Component: 150  -  total flux cleaned = -0.0021124 Jy
! Component: 200  -  total flux cleaned = -0.00236961 Jy
! Total flux subtracted in 200 components = -0.00236961 Jy
! Clean residual min=-0.006287 max=0.005946 Jy/beam
! Clean residual mean=-0.000005 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 3.02496 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 169 components and 3.02496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072417Jy  sigma=0.187464
! Fit after  self-cal, rms=0.072401Jy  sigma=0.187451
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072401Jy  sigma=0.187451
! Fit after  self-cal, rms=0.072292Jy  sigma=0.187177
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6623 mas, bmaj=1.573 mas, bpa=2.237 degrees
! Estimated noise=4.75214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84223 Jy
! Component: 100  -  total flux cleaned = 2.27987 Jy
! Component: 150  -  total flux cleaned = 2.47804 Jy
! Component: 200  -  total flux cleaned = 2.5995 Jy
! Total flux subtracted in 200 components = 2.5995 Jy
! Clean residual min=-0.028976 max=0.088123 Jy/beam
! Clean residual mean=0.000052 rms=0.008505 Jy/beam
! Combined flux in latest and established models = 2.5995 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 2.5995 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8194 mas, bmaj=1.897 mas, bpa=3.733 degrees
! Estimated noise=3.44281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139516 Jy
! Component: 100  -  total flux cleaned = 0.219568 Jy
! Component: 150  -  total flux cleaned = 0.27211 Jy
! Component: 200  -  total flux cleaned = 0.308784 Jy
! Total flux subtracted in 200 components = 0.308784 Jy
! Clean residual min=-0.012611 max=0.021079 Jy/beam
! Clean residual mean=-0.000008 rms=0.003508 Jy/beam
! Combined flux in latest and established models = 2.90829 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 51 components and 2.90829 Jy
! Inverting map 
! Added new window around map position (1, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0263475 Jy
! Component: 100  -  total flux cleaned = 0.0455975 Jy
! Component: 150  -  total flux cleaned = 0.0600545 Jy
! Component: 200  -  total flux cleaned = 0.0711933 Jy
! Total flux subtracted in 200 components = 0.0711933 Jy
! Clean residual min=-0.008316 max=0.010076 Jy/beam
! Clean residual mean=-0.000005 rms=0.001916 Jy/beam
! Combined flux in latest and established models = 2.97948 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 79 components and 2.97948 Jy
! Inverting map 
! Added new window around map position (-1.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104568 Jy
! Component: 100  -  total flux cleaned = 0.017321 Jy
! Component: 150  -  total flux cleaned = 0.0219054 Jy
! Component: 200  -  total flux cleaned = 0.0252565 Jy
! Total flux subtracted in 200 components = 0.0252565 Jy
! Clean residual min=-0.007116 max=0.006741 Jy/beam
! Clean residual mean=-0.000006 rms=0.001568 Jy/beam
! Combined flux in latest and established models = 3.00474 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 100 components and 3.00474 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.127 mas, bmaj=3.995 mas, bpa=9.784 degrees
! Estimated noise=4.8479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00779899 Jy
! Component: 100  -  total flux cleaned = 0.0123502 Jy
! Component: 150  -  total flux cleaned = 0.0144855 Jy
! Component: 200  -  total flux cleaned = 0.0161593 Jy
! Total flux subtracted in 200 components = 0.0161593 Jy
! Clean residual min=-0.007566 max=0.006391 Jy/beam
! Clean residual mean=-0.000013 rms=0.001777 Jy/beam
! Combined flux in latest and established models = 3.0209 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121796 Jy
! Component: 100  -  total flux cleaned = 0.00219759 Jy
! Component: 150  -  total flux cleaned = 0.00298287 Jy
! Component: 200  -  total flux cleaned = 0.00371055 Jy
! Total flux subtracted in 200 components = 0.00371055 Jy
! Clean residual min=-0.007178 max=0.005883 Jy/beam
! Clean residual mean=-0.000013 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 3.02461 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 139 components and 3.02461 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8194 mas, bmaj=1.897 mas, bpa=3.733 degrees
! Estimated noise=3.44281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00179987 Jy
! Component: 100  -  total flux cleaned = -0.00120736 Jy
! Component: 150  -  total flux cleaned = -0.000845661 Jy
! Component: 200  -  total flux cleaned = -0.000843952 Jy
! Total flux subtracted in 200 components = -0.000843952 Jy
! Clean residual min=-0.005629 max=0.005809 Jy/beam
! Clean residual mean=-0.000006 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 3.02376 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 156 components and 3.02376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072993Jy  sigma=0.189284
! Fit after  self-cal, rms=0.072635Jy  sigma=0.188320
wmodel J1337-1257_X_i_map.mod
! Writing 156 model components to file: J1337-1257_X_i_map.mod
wobs   J1337-1257_X_i_uvs.fits
! Writing UV FITS file: J1337-1257_X_i_uvs.fits
wwins  J1337-1257_X_i_map.win
! wwins: Wrote 10 windows to J1337-1257_X_i_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.83431e-05 Jy
! Component: 100  -  total flux cleaned = -0.00101412 Jy
! Component: 150  -  total flux cleaned = -0.00182869 Jy
! Component: 200  -  total flux cleaned = -0.00208717 Jy
! Component: 250  -  total flux cleaned = -0.00258656 Jy
! Component: 300  -  total flux cleaned = -0.00282875 Jy
! Component: 350  -  total flux cleaned = -0.00290713 Jy
! Component: 400  -  total flux cleaned = -0.00298367 Jy
! Component: 450  -  total flux cleaned = -0.00298349 Jy
! Component: 500  -  total flux cleaned = -0.00298351 Jy
! Component: 550  -  total flux cleaned = -0.00284134 Jy
! Component: 600  -  total flux cleaned = -0.00263391 Jy
! Component: 650  -  total flux cleaned = -0.00256514 Jy
! Component: 700  -  total flux cleaned = -0.00223118 Jy
! Component: 750  -  total flux cleaned = -0.00209967 Jy
! Component: 800  -  total flux cleaned = -0.00177799 Jy
! Component: 850  -  total flux cleaned = -0.00133701 Jy
! Component: 900  -  total flux cleaned = -0.00102855 Jy
! Component: 950  -  total flux cleaned = -0.000726313 Jy
! Component: 1000  -  total flux cleaned = -0.000487696 Jy
! Component: 1050  -  total flux cleaned = -7.65247e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000211921 Jy
! Component: 1150  -  total flux cleaned = 0.000552522 Jy
! Component: 1200  -  total flux cleaned = 0.000887831 Jy
! Component: 1250  -  total flux cleaned = 0.00132729 Jy
! Component: 1300  -  total flux cleaned = 0.00154334 Jy
! Component: 1350  -  total flux cleaned = 0.00186357 Jy
! Component: 1400  -  total flux cleaned = 0.0021802 Jy
! Component: 1450  -  total flux cleaned = 0.002695 Jy
! Component: 1500  -  total flux cleaned = 0.00294791 Jy
! Component: 1550  -  total flux cleaned = 0.00319779 Jy
! Component: 1600  -  total flux cleaned = 0.00354308 Jy
! Component: 1650  -  total flux cleaned = 0.00368859 Jy
! Component: 1700  -  total flux cleaned = 0.00411921 Jy
! Component: 1750  -  total flux cleaned = 0.00444802 Jy
! Component: 1800  -  total flux cleaned = 0.00463383 Jy
! Component: 1850  -  total flux cleaned = 0.00500128 Jy
! Component: 1900  -  total flux cleaned = 0.00518112 Jy
! Component: 1950  -  total flux cleaned = 0.00518072 Jy
! Component: 2000  -  total flux cleaned = 0.00535753 Jy
! Component: 2050  -  total flux cleaned = 0.00561771 Jy
! Component: 2100  -  total flux cleaned = 0.00587484 Jy
! Component: 2150  -  total flux cleaned = 0.0059592 Jy
! Component: 2200  -  total flux cleaned = 0.00633573 Jy
! Component: 2250  -  total flux cleaned = 0.00637737 Jy
! Component: 2300  -  total flux cleaned = 0.0065417 Jy
! Component: 2350  -  total flux cleaned = 0.00686438 Jy
! Component: 2400  -  total flux cleaned = 0.00698405 Jy
! Component: 2450  -  total flux cleaned = 0.00698404 Jy
! Component: 2500  -  total flux cleaned = 0.00721844 Jy
! Component: 2550  -  total flux cleaned = 0.00741096 Jy
! Component: 2600  -  total flux cleaned = 0.00748714 Jy
! Component: 2650  -  total flux cleaned = 0.00759973 Jy
! Component: 2700  -  total flux cleaned = 0.00786065 Jy
! Component: 2750  -  total flux cleaned = 0.00808167 Jy
! Component: 2800  -  total flux cleaned = 0.00811827 Jy
! Component: 2850  -  total flux cleaned = 0.00833518 Jy
! Component: 2900  -  total flux cleaned = 0.0085497 Jy
! Component: 2950  -  total flux cleaned = 0.00854959 Jy
! Component: 3000  -  total flux cleaned = 0.00882985 Jy
! Component: 3050  -  total flux cleaned = 0.0088642 Jy
! Component: 3100  -  total flux cleaned = 0.00900193 Jy
! Component: 3150  -  total flux cleaned = 0.00906969 Jy
! Component: 3200  -  total flux cleaned = 0.00913768 Jy
! Component: 3250  -  total flux cleaned = 0.00920429 Jy
! Component: 3300  -  total flux cleaned = 0.00923693 Jy
! Component: 3350  -  total flux cleaned = 0.00936864 Jy
! Component: 3400  -  total flux cleaned = 0.00933626 Jy
! Component: 3450  -  total flux cleaned = 0.00949766 Jy
! Component: 3500  -  total flux cleaned = 0.00949785 Jy
! Component: 3550  -  total flux cleaned = 0.00965621 Jy
! Component: 3600  -  total flux cleaned = 0.00968768 Jy
! Component: 3650  -  total flux cleaned = 0.00978161 Jy
! Component: 3700  -  total flux cleaned = 0.0098744 Jy
! Component: 3750  -  total flux cleaned = 0.00999654 Jy
! Component: 3800  -  total flux cleaned = 0.00999677 Jy
! Component: 3850  -  total flux cleaned = 0.0100876 Jy
! Component: 3900  -  total flux cleaned = 0.0101474 Jy
! Component: 3950  -  total flux cleaned = 0.0102369 Jy
! Component: 4000  -  total flux cleaned = 0.0102958 Jy
! Component: 4050  -  total flux cleaned = 0.0103545 Jy
! Total flux subtracted in 4096 components = 0.0105581 Jy
! Clean residual min=-0.001721 max=0.002390 Jy/beam
! Clean residual mean=-0.000001 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 3.03432 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 456 components and 3.03432 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1337-1257_X_i_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8194 x 1.897 at 3.733 degrees (North through East)
! Clean map  min=-0.0043789  max=2.4212 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1337-1257_X_i_map.fits
wmodel /image_prod/ug002_uva//J1337-1257_X_i_map.mod
! Writing 456 model components to file: /image_prod/ug002_uva//J1337-1257_X_i_map.mod
wobs   /image_prod/ug002_uva//J1337-1257_X_i_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1337-1257_X_i_uvs.fits
wwins  /image_prod/ug002_uva//J1337-1257_X_i_map.win
! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1337-1257_X_i_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.42116 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000494963 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0613295 0.0613295 0.122659 0.245318 0.490636 0.981273 1.96255 3.92509 7.85018 15.7004 31.4007 62.8014
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.421 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4891.61 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1337-1257_X_i_dfm.log closed on Thu Mar  5 01:21:12 2020