! Started logfile: /image_prod/ug002_uva//J1337-1257_X_h_dfm.log on Thu Mar 5 01:21:03 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1337-1257_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1337-1257_X_h_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.741667 visibilities/baseline/integration-bin. ! Found source: J1337-1257 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6408 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1337-1257_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.961550Jy sigma=7.614517 ! Fit after self-cal, rms=1.822855Jy sigma=4.609154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6611 mas, bmaj=1.707 mas, bpa=8.312 degrees ! Estimated noise=4.76507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.02239 Jy ! Component: 100 - total flux cleaned = 2.50845 Jy ! Total flux subtracted in 100 components = 2.50845 Jy ! Clean residual min=-0.089166 max=0.198971 Jy/beam ! Clean residual mean=-0.000182 rms=0.021246 Jy/beam ! Combined flux in latest and established models = 2.50845 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 2.50845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.522001Jy sigma=1.276995 ! Fit after self-cal, rms=0.521425Jy sigma=1.276003 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218167 Jy ! Component: 100 - total flux cleaned = 0.340103 Jy ! Total flux subtracted in 100 components = 0.340103 Jy ! Clean residual min=-0.074188 max=0.139707 Jy/beam ! Clean residual mean=-0.000052 rms=0.015760 Jy/beam ! Combined flux in latest and established models = 2.84856 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 2.84856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.353029Jy sigma=0.887806 ! Fit after self-cal, rms=0.351218Jy sigma=0.883273 ! Inverting map ! Added new window around map position (1.8, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119409 Jy ! Component: 100 - total flux cleaned = 0.167897 Jy ! Total flux subtracted in 100 components = 0.167897 Jy ! Clean residual min=-0.061930 max=0.114066 Jy/beam ! Clean residual mean=0.000001 rms=0.013093 Jy/beam ! Combined flux in latest and established models = 3.01645 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 3.01645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.294922Jy sigma=0.747650 ! Fit after self-cal, rms=0.289661Jy sigma=0.731765 ! Inverting map ! Added new window around map position (1.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0922456 Jy ! Component: 100 - total flux cleaned = 0.13476 Jy ! Total flux subtracted in 100 components = 0.13476 Jy ! Clean residual min=-0.060234 max=0.074093 Jy/beam ! Clean residual mean=0.000039 rms=0.010932 Jy/beam ! Combined flux in latest and established models = 3.15121 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 3.15121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.248364Jy sigma=0.633965 ! Fit after self-cal, rms=0.246022Jy sigma=0.629996 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458544 Jy ! Component: 100 - total flux cleaned = 0.0692418 Jy ! Total flux subtracted in 100 components = 0.0692418 Jy ! Clean residual min=-0.051758 max=0.055356 Jy/beam ! Clean residual mean=0.000060 rms=0.009869 Jy/beam ! Combined flux in latest and established models = 3.22045 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 3.22045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.228947Jy sigma=0.586176 ! Fit after self-cal, rms=0.228090Jy sigma=0.584951 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8025 mas, bmaj=2.017 mas, bpa=7.704 degrees ! Estimated noise=3.54735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493239 Jy ! Component: 100 - total flux cleaned = 0.0682588 Jy ! Component: 150 - total flux cleaned = 0.0739121 Jy ! Component: 200 - total flux cleaned = 0.0779516 Jy ! Total flux subtracted in 200 components = 0.0779516 Jy ! Clean residual min=-0.052394 max=0.050581 Jy/beam ! Clean residual mean=0.000102 rms=0.010843 Jy/beam ! Combined flux in latest and established models = 3.29841 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 68 components and 3.29841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.211765Jy sigma=0.546948 ! Fit after self-cal, rms=0.210723Jy sigma=0.544974 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8025 x 2.017 at 7.704 degrees (North through East) ! Clean map min=-0.049653 max=2.6515 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.05 ! LA 1.04 MK 1.05 OV 0.94 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00 KP 1.03 ! LA 1.04 MK 1.03 OV 0.94 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.00 KP 1.06 ! LA 1.06 MK 1.05 OV 0.93 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.06 ! LA 1.04 MK 1.05 OV 0.93 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.99 KP 1.05 ! LA 1.05 MK 1.05 OV 0.94 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 1.05 ! LA 1.05 MK 1.03 OV 0.93 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 1.04 ! LA 1.04 MK 1.05 OV 0.93 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.99 KP 1.06 ! LA 1.05 MK 1.02 OV 0.93 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.97 KP 1.04 ! LA 1.05 MK 1.02 OV 0.94 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.03 ! LA 1.04 MK 1.04 OV 0.95 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.98 KP 1.02 ! LA 1.06 MK 1.03 OV 0.93 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 1.05 ! LA 1.04 MK 1.03 OV 0.93 PT 0.96 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.210723Jy sigma=0.544974 ! Fit after self-cal, rms=0.159657Jy sigma=0.418592 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8084 mas, bmaj=2.025 mas, bpa=7.897 degrees ! Estimated noise=3.54718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268049 Jy ! Component: 100 - total flux cleaned = 0.0246193 Jy ! Component: 150 - total flux cleaned = 0.0239523 Jy ! Component: 200 - total flux cleaned = 0.0234193 Jy ! Total flux subtracted in 200 components = 0.0234193 Jy ! Clean residual min=-0.044843 max=0.036802 Jy/beam ! Clean residual mean=0.000010 rms=0.007057 Jy/beam ! Combined flux in latest and established models = 3.32183 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 3.32182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151921Jy sigma=0.400160 ! Fit after self-cal, rms=0.150886Jy sigma=0.397980 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150886Jy sigma=0.397980 ! Fit after self-cal, rms=0.119413Jy sigma=0.297113 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8074 mas, bmaj=2.026 mas, bpa=7.734 degrees ! Estimated noise=3.54981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0179947 Jy ! Component: 100 - total flux cleaned = -0.023285 Jy ! Component: 150 - total flux cleaned = -0.0244579 Jy ! Component: 200 - total flux cleaned = -0.0254803 Jy ! Total flux subtracted in 200 components = -0.0254803 Jy ! Clean residual min=-0.025094 max=0.020988 Jy/beam ! Clean residual mean=-0.000033 rms=0.004120 Jy/beam ! Combined flux in latest and established models = 3.29634 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 3.29634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108374Jy sigma=0.271952 ! Fit after self-cal, rms=0.107343Jy sigma=0.270056 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546332 Jy ! Component: 100 - total flux cleaned = -0.000994739 Jy ! Component: 150 - total flux cleaned = -0.000996823 Jy ! Component: 200 - total flux cleaned = -0.00136109 Jy ! Total flux subtracted in 200 components = -0.00136109 Jy ! Clean residual min=-0.022685 max=0.020250 Jy/beam ! Clean residual mean=-0.000032 rms=0.003865 Jy/beam ! Combined flux in latest and established models = 3.29498 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 3.29498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103736Jy sigma=0.262426 ! Fit after self-cal, rms=0.103257Jy sigma=0.261689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103257Jy sigma=0.261689 ! Fit after self-cal, rms=0.097914Jy sigma=0.244961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8075 mas, bmaj=2.029 mas, bpa=7.72 degrees ! Estimated noise=3.54607 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0162192 Jy ! Component: 100 - total flux cleaned = -0.0162767 Jy ! Component: 150 - total flux cleaned = -0.0154264 Jy ! Component: 200 - total flux cleaned = -0.0157829 Jy ! Total flux subtracted in 200 components = -0.0157829 Jy ! Clean residual min=-0.016936 max=0.014274 Jy/beam ! Clean residual mean=-0.000036 rms=0.002977 Jy/beam ! Combined flux in latest and established models = 3.2792 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 3.2792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091655Jy sigma=0.230941 ! Fit after self-cal, rms=0.091205Jy sigma=0.230200 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.08605e-05 Jy ! Component: 100 - total flux cleaned = -1.71779e-05 Jy ! Component: 150 - total flux cleaned = -0.000279424 Jy ! Component: 200 - total flux cleaned = -0.000536022 Jy ! Total flux subtracted in 200 components = -0.000536022 Jy ! Clean residual min=-0.015404 max=0.013727 Jy/beam ! Clean residual mean=-0.000035 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 3.27866 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 111 components and 3.27866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089064Jy sigma=0.225702 ! Fit after self-cal, rms=0.088796Jy sigma=0.225344 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088796Jy sigma=0.225344 ! Fit after self-cal, rms=0.086585Jy sigma=0.219157 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=3.956 mas, bpa=16.89 degrees ! Estimated noise=5.04097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00622001 Jy ! Component: 100 - total flux cleaned = -0.00918947 Jy ! Component: 150 - total flux cleaned = -0.0103121 Jy ! Component: 200 - total flux cleaned = -0.01122 Jy ! Total flux subtracted in 200 components = -0.01122 Jy ! Clean residual min=-0.013769 max=0.011966 Jy/beam ! Clean residual mean=-0.000078 rms=0.003352 Jy/beam ! Combined flux in latest and established models = 3.26744 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 3.26744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085747Jy sigma=0.216680 ! Fit after self-cal, rms=0.085618Jy sigma=0.216192 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801527 Jy ! Component: 100 - total flux cleaned = 0.000233711 Jy ! Component: 150 - total flux cleaned = -0.000580083 Jy ! Component: 200 - total flux cleaned = -0.00114701 Jy ! Total flux subtracted in 200 components = -0.00114701 Jy ! Clean residual min=-0.013485 max=0.011075 Jy/beam ! Clean residual mean=-0.000078 rms=0.003254 Jy/beam ! Combined flux in latest and established models = 3.2663 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 3.2663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085375Jy sigma=0.215470 ! Fit after self-cal, rms=0.085292Jy sigma=0.215261 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8075 mas, bmaj=2.031 mas, bpa=7.71 degrees ! Estimated noise=3.54239 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8075 x 2.031 at 7.71 degrees (North through East) ! Clean map min=-0.016853 max=2.6633 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085292Jy sigma=0.215261 ! Fit after self-cal, rms=0.080102Jy sigma=0.192940 ! Inverting map and beam ! Estimated beam: bmin=0.8074 mas, bmaj=2.031 mas, bpa=7.686 degrees ! Estimated noise=3.54136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00396772 Jy ! Component: 100 - total flux cleaned = -0.00361188 Jy ! Component: 150 - total flux cleaned = -0.00332434 Jy ! Component: 200 - total flux cleaned = -0.00286089 Jy ! Total flux subtracted in 200 components = -0.00286089 Jy ! Clean residual min=-0.011388 max=0.010337 Jy/beam ! Clean residual mean=-0.000025 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 3.26344 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 134 components and 3.26344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077132Jy sigma=0.186810 ! Fit after self-cal, rms=0.076978Jy sigma=0.186459 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356148 Jy ! Component: 100 - total flux cleaned = 0.000237997 Jy ! Component: 150 - total flux cleaned = 5.62741e-05 Jy ! Component: 200 - total flux cleaned = 6.09293e-05 Jy ! Total flux subtracted in 200 components = 6.09293e-05 Jy ! Clean residual min=-0.010645 max=0.010091 Jy/beam ! Clean residual mean=-0.000024 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 3.2635 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 3.2635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075907Jy sigma=0.184331 ! Fit after self-cal, rms=0.075806Jy sigma=0.184162 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075806Jy sigma=0.184162 ! Fit after self-cal, rms=0.074897Jy sigma=0.181518 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6633 mas, bmaj=1.721 mas, bpa=8.382 degrees ! Estimated noise=4.75774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01302 Jy ! Component: 100 - total flux cleaned = 2.49557 Jy ! Component: 150 - total flux cleaned = 2.71464 Jy ! Component: 200 - total flux cleaned = 2.84939 Jy ! Total flux subtracted in 200 components = 2.84939 Jy ! Clean residual min=-0.036679 max=0.072791 Jy/beam ! Clean residual mean=-0.000134 rms=0.008969 Jy/beam ! Combined flux in latest and established models = 2.84939 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 2.84939 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8073 mas, bmaj=2.031 mas, bpa=7.675 degrees ! Estimated noise=3.53824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146534 Jy ! Component: 100 - total flux cleaned = 0.238556 Jy ! Component: 150 - total flux cleaned = 0.300196 Jy ! Component: 200 - total flux cleaned = 0.342887 Jy ! Total flux subtracted in 200 components = 0.342887 Jy ! Clean residual min=-0.017038 max=0.029114 Jy/beam ! Clean residual mean=-0.000053 rms=0.003988 Jy/beam ! Combined flux in latest and established models = 3.19228 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 3.19228 Jy ! Inverting map ! Added new window around map position (0.6, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031493 Jy ! Component: 100 - total flux cleaned = 0.051557 Jy ! Component: 150 - total flux cleaned = 0.0602922 Jy ! Component: 200 - total flux cleaned = 0.0642247 Jy ! Total flux subtracted in 200 components = 0.0642247 Jy ! Clean residual min=-0.014418 max=0.012626 Jy/beam ! Clean residual mean=-0.000029 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 3.2565 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 3.2565 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=3.951 mas, bpa=16.87 degrees ! Estimated noise=5.03817 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121566 Jy ! Component: 100 - total flux cleaned = 0.0127944 Jy ! Component: 150 - total flux cleaned = 0.0125501 Jy ! Component: 200 - total flux cleaned = 0.0121018 Jy ! Total flux subtracted in 200 components = 0.0121018 Jy ! Clean residual min=-0.010607 max=0.009344 Jy/beam ! Clean residual mean=-0.000056 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 3.2686 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.59603e-06 Jy ! Component: 100 - total flux cleaned = -0.000188274 Jy ! Component: 150 - total flux cleaned = -0.000190565 Jy ! Component: 200 - total flux cleaned = -0.000191866 Jy ! Total flux subtracted in 200 components = -0.000191866 Jy ! Clean residual min=-0.010005 max=0.009072 Jy/beam ! Clean residual mean=-0.000056 rms=0.002594 Jy/beam ! Combined flux in latest and established models = 3.26841 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 79 components and 3.26841 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8073 mas, bmaj=2.031 mas, bpa=7.675 degrees ! Estimated noise=3.53824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000824521 Jy ! Component: 100 - total flux cleaned = -0.000870765 Jy ! Component: 150 - total flux cleaned = -0.000341909 Jy ! Component: 200 - total flux cleaned = 0.000135306 Jy ! Total flux subtracted in 200 components = 0.000135306 Jy ! Clean residual min=-0.009669 max=0.009467 Jy/beam ! Clean residual mean=-0.000022 rms=0.001946 Jy/beam ! Combined flux in latest and established models = 3.26855 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 3.26855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074189Jy sigma=0.183493 ! Fit after self-cal, rms=0.073916Jy sigma=0.182728 wmodel J1337-1257_X_h_map.mod ! Writing 93 model components to file: J1337-1257_X_h_map.mod wobs J1337-1257_X_h_uvs.fits ! Writing UV FITS file: J1337-1257_X_h_uvs.fits wwins J1337-1257_X_h_map.win ! wwins: Wrote 5 windows to J1337-1257_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503975 Jy ! Component: 100 - total flux cleaned = -0.000666151 Jy ! Component: 150 - total flux cleaned = -0.000670576 Jy ! Component: 200 - total flux cleaned = -0.000528175 Jy ! Component: 250 - total flux cleaned = -0.000392573 Jy ! Component: 300 - total flux cleaned = -0.000792396 Jy ! Component: 350 - total flux cleaned = -0.000791453 Jy ! Component: 400 - total flux cleaned = -0.00104051 Jy ! Component: 450 - total flux cleaned = -0.00116009 Jy ! Component: 500 - total flux cleaned = -0.00115941 Jy ! Component: 550 - total flux cleaned = -0.000931842 Jy ! Component: 600 - total flux cleaned = -0.00115583 Jy ! Component: 650 - total flux cleaned = -0.00115745 Jy ! Component: 700 - total flux cleaned = -0.00137112 Jy ! Component: 750 - total flux cleaned = -0.00147415 Jy ! Component: 800 - total flux cleaned = -0.00177776 Jy ! Component: 850 - total flux cleaned = -0.00168011 Jy ! Component: 900 - total flux cleaned = -0.00196984 Jy ! Component: 950 - total flux cleaned = -0.00206469 Jy ! Component: 1000 - total flux cleaned = -0.00234057 Jy ! Component: 1050 - total flux cleaned = -0.00224793 Jy ! Component: 1100 - total flux cleaned = -0.00278434 Jy ! Component: 1150 - total flux cleaned = -0.0030459 Jy ! Component: 1200 - total flux cleaned = -0.00313132 Jy ! Component: 1250 - total flux cleaned = -0.00330158 Jy ! Component: 1300 - total flux cleaned = -0.00363576 Jy ! Component: 1350 - total flux cleaned = -0.00404704 Jy ! Component: 1400 - total flux cleaned = -0.00404656 Jy ! Component: 1450 - total flux cleaned = -0.00428612 Jy ! Component: 1500 - total flux cleaned = -0.00475396 Jy ! Component: 1550 - total flux cleaned = -0.00490605 Jy ! Component: 1600 - total flux cleaned = -0.00498242 Jy ! Component: 1650 - total flux cleaned = -0.00505691 Jy ! Component: 1700 - total flux cleaned = -0.00520315 Jy ! Component: 1750 - total flux cleaned = -0.00541859 Jy ! Component: 1800 - total flux cleaned = -0.00548948 Jy ! Component: 1850 - total flux cleaned = -0.00556011 Jy ! Component: 1900 - total flux cleaned = -0.00576723 Jy ! Component: 1950 - total flux cleaned = -0.00576653 Jy ! Component: 2000 - total flux cleaned = -0.00590187 Jy ! Component: 2050 - total flux cleaned = -0.00596731 Jy ! Component: 2100 - total flux cleaned = -0.00577424 Jy ! Component: 2150 - total flux cleaned = -0.00603027 Jy ! Component: 2200 - total flux cleaned = -0.00609346 Jy ! Component: 2250 - total flux cleaned = -0.006342 Jy ! Component: 2300 - total flux cleaned = -0.00646394 Jy ! Component: 2350 - total flux cleaned = -0.00652482 Jy ! Component: 2400 - total flux cleaned = -0.00711999 Jy ! Component: 2450 - total flux cleaned = -0.00729521 Jy ! Component: 2500 - total flux cleaned = -0.0074104 Jy ! Component: 2550 - total flux cleaned = -0.00763715 Jy ! Component: 2600 - total flux cleaned = -0.00752486 Jy ! Component: 2650 - total flux cleaned = -0.0079144 Jy ! Component: 2700 - total flux cleaned = -0.00807793 Jy ! Component: 2750 - total flux cleaned = -0.00824097 Jy ! Component: 2800 - total flux cleaned = -0.00834847 Jy ! Component: 2850 - total flux cleaned = -0.00850675 Jy ! Component: 2900 - total flux cleaned = -0.00876828 Jy ! Component: 2950 - total flux cleaned = -0.00881884 Jy ! Component: 3000 - total flux cleaned = -0.00886971 Jy ! Component: 3050 - total flux cleaned = -0.00887038 Jy ! Component: 3100 - total flux cleaned = -0.00901917 Jy ! Component: 3150 - total flux cleaned = -0.00921591 Jy ! Component: 3200 - total flux cleaned = -0.00931326 Jy ! Component: 3250 - total flux cleaned = -0.00917014 Jy ! Component: 3300 - total flux cleaned = -0.00950194 Jy ! Component: 3350 - total flux cleaned = -0.00945467 Jy ! Component: 3400 - total flux cleaned = -0.0095462 Jy ! Component: 3450 - total flux cleaned = -0.00950144 Jy ! Component: 3500 - total flux cleaned = -0.00963797 Jy ! Component: 3550 - total flux cleaned = -0.00972687 Jy ! Component: 3600 - total flux cleaned = -0.00999237 Jy ! Component: 3650 - total flux cleaned = -0.00990533 Jy ! Component: 3700 - total flux cleaned = -0.0101207 Jy ! Component: 3750 - total flux cleaned = -0.0101631 Jy ! Component: 3800 - total flux cleaned = -0.0102898 Jy ! Component: 3850 - total flux cleaned = -0.0102896 Jy ! Component: 3900 - total flux cleaned = -0.010332 Jy ! Component: 3950 - total flux cleaned = -0.0104146 Jy ! Component: 4000 - total flux cleaned = -0.0105366 Jy ! Component: 4050 - total flux cleaned = -0.010697 Jy ! Total flux subtracted in 4096 components = -0.0106173 Jy ! Clean residual min=-0.002407 max=0.002046 Jy/beam ! Clean residual mean=-0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 3.25793 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 364 components and 3.25793 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1337-1257_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8073 x 2.031 at 7.675 degrees (North through East) ! Clean map min=-0.010966 max=2.6748 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1337-1257_X_h_map.fits wmodel /image_prod/ug002_uva//J1337-1257_X_h_map.mod ! Writing 364 model components to file: /image_prod/ug002_uva//J1337-1257_X_h_map.mod wobs /image_prod/ug002_uva//J1337-1257_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1337-1257_X_h_uvs.fits wwins /image_prod/ug002_uva//J1337-1257_X_h_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1337-1257_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.67478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000665154 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0746029 0.0746029 0.149206 0.298411 0.596823 1.19365 2.38729 4.77458 9.54917 19.0983 38.1967 76.3933 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.674 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4021.29 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1337-1257_X_h_dfm.log closed on Thu Mar 5 01:21:07 2020