! Started logfile: /image_prod/ug002_uva//J1337-1257_S_b_dfm.log on Thu Mar  5 01:19:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1337-1257_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1337-1257_S_b_uva.fits
! AN table 1: 15 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.768519 visibilities/baseline/integration-bin.
! Found source: J1337-1257
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1245 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1337-1257_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.829159Jy  sigma=7.469753
! Fit after  self-cal, rms=1.814367Jy  sigma=4.699126
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.27 mas, bmaj=16.09 mas, bpa=-15.66 degrees
! Estimated noise=9.06736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.11938 Jy
! Component: 100  -  total flux cleaned = 2.58155 Jy
! Total flux subtracted in 100 components = 2.58155 Jy
! Clean residual min=-0.083922 max=0.167676 Jy/beam
! Clean residual mean=-0.000283 rms=0.029499 Jy/beam
! Combined flux in latest and established models = 2.58155 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 2.58155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.510539Jy  sigma=1.107487
! Fit after  self-cal, rms=0.510540Jy  sigma=1.107478
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.029 mas, bmaj=16.42 mas, bpa=-14.18 degrees
! Estimated noise=7.75351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39, -49).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173516 Jy
! Component: 100  -  total flux cleaned = 0.249936 Jy
! Component: 150  -  total flux cleaned = 0.255554 Jy
! Component: 200  -  total flux cleaned = 0.257992 Jy
! Total flux subtracted in 200 components = 0.257992 Jy
! Clean residual min=-0.057553 max=0.109575 Jy/beam
! Clean residual mean=-0.000057 rms=0.020008 Jy/beam
! Combined flux in latest and established models = 2.83954 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 34 components and 2.83954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.447251Jy  sigma=0.853866
! Fit after  self-cal, rms=0.444630Jy  sigma=0.843434
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.029 x 16.42 at -14.18 degrees (North through East)
! Clean map  min=-0.056913  max=2.6595 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.99     MK        0.99     NL        0.93     OV        0.94     
!   PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.02     MK        1.01     NL        1.04     OV        0.97     
!   PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.97     HN        1.02     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.94     OV        0.97     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.444630Jy  sigma=0.843434
! Fit after  self-cal, rms=0.334097Jy  sigma=0.631591
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.032 mas, bmaj=16.85 mas, bpa=-14.33 degrees
! Estimated noise=7.70074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0348874 Jy
! Component: 100  -  total flux cleaned = -0.0507406 Jy
! Component: 150  -  total flux cleaned = -0.0609358 Jy
! Component: 200  -  total flux cleaned = -0.0669034 Jy
! Total flux subtracted in 200 components = -0.0669034 Jy
! Clean residual min=-0.053874 max=0.057514 Jy/beam
! Clean residual mean=0.000128 rms=0.014387 Jy/beam
! Combined flux in latest and established models = 2.77264 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 2.77264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.306749Jy  sigma=0.574970
! Fit after  self-cal, rms=0.306174Jy  sigma=0.572438
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.306174Jy  sigma=0.572438
! Fit after  self-cal, rms=0.120345Jy  sigma=0.297533
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.03 mas, bmaj=16.59 mas, bpa=-14.28 degrees
! Estimated noise=7.66911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0118686 Jy
! Component: 100  -  total flux cleaned = -0.0111089 Jy
! Component: 150  -  total flux cleaned = -0.00758383 Jy
! Component: 200  -  total flux cleaned = -0.00407969 Jy
! Total flux subtracted in 200 components = -0.00407969 Jy
! Clean residual min=-0.030303 max=0.022183 Jy/beam
! Clean residual mean=0.000054 rms=0.006051 Jy/beam
! Combined flux in latest and established models = 2.76856 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 86 components and 2.76856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108480Jy  sigma=0.269460
! Fit after  self-cal, rms=0.107682Jy  sigma=0.268203
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445267 Jy
! Component: 100  -  total flux cleaned = -0.000411387 Jy
! Component: 150  -  total flux cleaned = -0.00121199 Jy
! Component: 200  -  total flux cleaned = -0.0019429 Jy
! Total flux subtracted in 200 components = -0.0019429 Jy
! Clean residual min=-0.028550 max=0.019832 Jy/beam
! Clean residual mean=0.000072 rms=0.005673 Jy/beam
! Combined flux in latest and established models = 2.76661 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 2.76661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103901Jy  sigma=0.260246
! Fit after  self-cal, rms=0.103721Jy  sigma=0.260006
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103721Jy  sigma=0.260006
! Fit after  self-cal, rms=0.100800Jy  sigma=0.253590
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.03 mas, bmaj=16.58 mas, bpa=-14.26 degrees
! Estimated noise=7.67095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0046002 Jy
! Component: 100  -  total flux cleaned = -0.00179754 Jy
! Component: 150  -  total flux cleaned = -0.000169918 Jy
! Component: 200  -  total flux cleaned = 0.000191395 Jy
! Total flux subtracted in 200 components = 0.000191395 Jy
! Clean residual min=-0.024940 max=0.017586 Jy/beam
! Clean residual mean=0.000082 rms=0.004901 Jy/beam
! Combined flux in latest and established models = 2.76681 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 120 components and 2.7668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096621Jy  sigma=0.243380
! Fit after  self-cal, rms=0.096358Jy  sigma=0.242952
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00126033 Jy
! Component: 100  -  total flux cleaned = -0.00154941 Jy
! Component: 150  -  total flux cleaned = -0.00180897 Jy
! Component: 200  -  total flux cleaned = -0.00231409 Jy
! Total flux subtracted in 200 components = -0.00231409 Jy
! Clean residual min=-0.023290 max=0.017320 Jy/beam
! Clean residual mean=0.000092 rms=0.004694 Jy/beam
! Combined flux in latest and established models = 2.76449 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 136 components and 2.76449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094627Jy  sigma=0.238927
! Fit after  self-cal, rms=0.094570Jy  sigma=0.238812
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094570Jy  sigma=0.238812
! Fit after  self-cal, rms=0.093416Jy  sigma=0.235551
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.991 mas, bmaj=17.77 mas, bpa=-7.977 degrees
! Estimated noise=8.84951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00239074 Jy
! Component: 100  -  total flux cleaned = 0.00145384 Jy
! Component: 150  -  total flux cleaned = 0.00236235 Jy
! Component: 200  -  total flux cleaned = 0.00263382 Jy
! Total flux subtracted in 200 components = 0.00263382 Jy
! Clean residual min=-0.025996 max=0.021416 Jy/beam
! Clean residual mean=0.000145 rms=0.005418 Jy/beam
! Combined flux in latest and established models = 2.76712 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 170 components and 2.76712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091536Jy  sigma=0.230814
! Fit after  self-cal, rms=0.091335Jy  sigma=0.230384
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000924761 Jy
! Component: 100  -  total flux cleaned = -0.000694793 Jy
! Component: 150  -  total flux cleaned = -0.000899938 Jy
! Component: 200  -  total flux cleaned = -0.00127706 Jy
! Total flux subtracted in 200 components = -0.00127706 Jy
! Clean residual min=-0.024310 max=0.020972 Jy/beam
! Clean residual mean=0.000150 rms=0.005207 Jy/beam
! Combined flux in latest and established models = 2.76585 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 190 components and 2.76585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090641Jy  sigma=0.228760
! Fit after  self-cal, rms=0.090610Jy  sigma=0.228684
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=16.57 mas, bpa=-14.25 degrees
! Estimated noise=7.67207 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.028 x 16.57 at -14.25 degrees (North through East)
! Clean map  min=-0.044604  max=2.6433 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090610Jy  sigma=0.228684
! Fit after  self-cal, rms=0.085811Jy  sigma=0.211347
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=16.56 mas, bpa=-14.24 degrees
! Estimated noise=7.67634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00473822 Jy
! Component: 100  -  total flux cleaned = -0.00413976 Jy
! Component: 150  -  total flux cleaned = -0.00338652 Jy
! Component: 200  -  total flux cleaned = -0.00316492 Jy
! Total flux subtracted in 200 components = -0.00316492 Jy
! Clean residual min=-0.017943 max=0.014417 Jy/beam
! Clean residual mean=0.000080 rms=0.003770 Jy/beam
! Combined flux in latest and established models = 2.76268 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 209 components and 2.76268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083923Jy  sigma=0.206829
! Fit after  self-cal, rms=0.083828Jy  sigma=0.206619
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130836 Jy
! Component: 100  -  total flux cleaned = -0.000706302 Jy
! Component: 150  -  total flux cleaned = -0.000699929 Jy
! Component: 200  -  total flux cleaned = -0.000868026 Jy
! Total flux subtracted in 200 components = -0.000868026 Jy
! Clean residual min=-0.017195 max=0.014016 Jy/beam
! Clean residual mean=0.000087 rms=0.003662 Jy/beam
! Combined flux in latest and established models = 2.76181 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 224 components and 2.76182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082973Jy  sigma=0.204568
! Fit after  self-cal, rms=0.082947Jy  sigma=0.204471
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082947Jy  sigma=0.204471
! Fit after  self-cal, rms=0.082614Jy  sigma=0.203128
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.272 mas, bmaj=16.1 mas, bpa=-15.69 degrees
! Estimated noise=8.91933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.08449 Jy
! Component: 100  -  total flux cleaned = 2.5392 Jy
! Component: 150  -  total flux cleaned = 2.65433 Jy
! Component: 200  -  total flux cleaned = 2.70855 Jy
! Total flux subtracted in 200 components = 2.70855 Jy
! Clean residual min=-0.020915 max=0.039152 Jy/beam
! Clean residual mean=-0.000094 rms=0.007103 Jy/beam
! Combined flux in latest and established models = 2.70855 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.70855 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=16.56 mas, bpa=-14.24 degrees
! Estimated noise=7.67843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38, 51.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0454112 Jy
! Component: 100  -  total flux cleaned = 0.0711029 Jy
! Component: 150  -  total flux cleaned = 0.0809264 Jy
! Component: 200  -  total flux cleaned = 0.0823225 Jy
! Total flux subtracted in 200 components = 0.0823225 Jy
! Clean residual min=-0.015066 max=0.024937 Jy/beam
! Clean residual mean=0.000008 rms=0.004673 Jy/beam
! Combined flux in latest and established models = 2.79087 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 63 components and 2.79087 Jy
! Inverting map 
! Added new window around map position (38.5, -78.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00851888 Jy
! Component: 100  -  total flux cleaned = 0.00624238 Jy
! Component: 150  -  total flux cleaned = 0.00574397 Jy
! Component: 200  -  total flux cleaned = 0.00574433 Jy
! Total flux subtracted in 200 components = 0.00574433 Jy
! Clean residual min=-0.012321 max=0.015543 Jy/beam
! Clean residual mean=0.000027 rms=0.003624 Jy/beam
! Combined flux in latest and established models = 2.79662 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 92 components and 2.79662 Jy
! Inverting map 
! Added new window around map position (57.5, -77.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101512 Jy
! Component: 100  -  total flux cleaned = 0.00921911 Jy
! Component: 150  -  total flux cleaned = 0.00961975 Jy
! Component: 200  -  total flux cleaned = 0.00885044 Jy
! Total flux subtracted in 200 components = 0.00885044 Jy
! Clean residual min=-0.010604 max=0.012799 Jy/beam
! Clean residual mean=0.000012 rms=0.002892 Jy/beam
! Combined flux in latest and established models = 2.80547 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 124 components and 2.80547 Jy
! Inverting map 
! Added new window around map position (-13, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662851 Jy
! Component: 100  -  total flux cleaned = 0.00497137 Jy
! Component: 150  -  total flux cleaned = 0.00343269 Jy
! Component: 200  -  total flux cleaned = 0.00198544 Jy
! Total flux subtracted in 200 components = 0.00198544 Jy
! Clean residual min=-0.008727 max=0.008822 Jy/beam
! Clean residual mean=0.000012 rms=0.002398 Jy/beam
! Combined flux in latest and established models = 2.80745 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 152 components and 2.80745 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.979 mas, bmaj=17.78 mas, bpa=-7.959 degrees
! Estimated noise=8.86538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00328345 Jy
! Component: 100  -  total flux cleaned = -0.00580912 Jy
! Component: 150  -  total flux cleaned = -0.00758455 Jy
! Component: 200  -  total flux cleaned = -0.00920982 Jy
! Total flux subtracted in 200 components = -0.00920982 Jy
! Clean residual min=-0.007554 max=0.008863 Jy/beam
! Clean residual mean=0.000015 rms=0.002417 Jy/beam
! Combined flux in latest and established models = 2.79824 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108326 Jy
! Component: 100  -  total flux cleaned = -0.00210512 Jy
! Component: 150  -  total flux cleaned = -0.00287471 Jy
! Component: 200  -  total flux cleaned = -0.00378858 Jy
! Total flux subtracted in 200 components = -0.00378858 Jy
! Clean residual min=-0.006973 max=0.007988 Jy/beam
! Clean residual mean=0.000024 rms=0.002156 Jy/beam
! Combined flux in latest and established models = 2.79446 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 239 components and 2.79445 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=16.56 mas, bpa=-14.24 degrees
! Estimated noise=7.67843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00178597 Jy
! Component: 100  -  total flux cleaned = -0.00221407 Jy
! Component: 150  -  total flux cleaned = -0.00240764 Jy
! Component: 200  -  total flux cleaned = -0.00277556 Jy
! Total flux subtracted in 200 components = -0.00277556 Jy
! Clean residual min=-0.006408 max=0.007153 Jy/beam
! Clean residual mean=0.000017 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 2.79168 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 272 components and 2.79168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074045Jy  sigma=0.179550
! Fit after  self-cal, rms=0.073387Jy  sigma=0.177741
wmodel J1337-1257_S_b_map.mod
! Writing 272 model components to file: J1337-1257_S_b_map.mod
wobs   J1337-1257_S_b_uvs.fits
! Writing UV FITS file: J1337-1257_S_b_uvs.fits
wwins  J1337-1257_S_b_map.win
! wwins: Wrote 6 windows to J1337-1257_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000686512 Jy
! Component: 100  -  total flux cleaned = -0.00180738 Jy
! Component: 150  -  total flux cleaned = -0.00228476 Jy
! Component: 200  -  total flux cleaned = -0.0021048 Jy
! Component: 250  -  total flux cleaned = -0.00184358 Jy
! Component: 300  -  total flux cleaned = -0.00167575 Jy
! Component: 350  -  total flux cleaned = -0.00151516 Jy
! Component: 400  -  total flux cleaned = -0.00167601 Jy
! Component: 450  -  total flux cleaned = -0.00159763 Jy
! Component: 500  -  total flux cleaned = -0.00137108 Jy
! Component: 550  -  total flux cleaned = -0.00101163 Jy
! Component: 600  -  total flux cleaned = -0.000944207 Jy
! Component: 650  -  total flux cleaned = -0.000944354 Jy
! Component: 700  -  total flux cleaned = -0.000613353 Jy
! Component: 750  -  total flux cleaned = -0.000678905 Jy
! Component: 800  -  total flux cleaned = -0.000488896 Jy
! Component: 850  -  total flux cleaned = -0.000488555 Jy
! Component: 900  -  total flux cleaned = -0.000368324 Jy
! Component: 950  -  total flux cleaned = -0.000487061 Jy
! Component: 1000  -  total flux cleaned = -0.000427821 Jy
! Component: 1050  -  total flux cleaned = -0.000313566 Jy
! Component: 1100  -  total flux cleaned = -0.000257432 Jy
! Component: 1150  -  total flux cleaned = 7.11591e-05 Jy
! Component: 1200  -  total flux cleaned = 1.59294e-05 Jy
! Component: 1250  -  total flux cleaned = 6.79977e-05 Jy
! Component: 1300  -  total flux cleaned = 0.000118491 Jy
! Component: 1350  -  total flux cleaned = 0.000321823 Jy
! Component: 1400  -  total flux cleaned = 0.000523009 Jy
! Component: 1450  -  total flux cleaned = 0.000669539 Jy
! Component: 1500  -  total flux cleaned = 0.000766832 Jy
! Component: 1550  -  total flux cleaned = 0.000813913 Jy
! Component: 1600  -  total flux cleaned = 0.000861089 Jy
! Component: 1650  -  total flux cleaned = 0.00104489 Jy
! Component: 1700  -  total flux cleaned = 0.00113515 Jy
! Component: 1750  -  total flux cleaned = 0.00117934 Jy
! Component: 1800  -  total flux cleaned = 0.00144291 Jy
! Component: 1850  -  total flux cleaned = 0.00144247 Jy
! Component: 1900  -  total flux cleaned = 0.00165574 Jy
! Component: 1950  -  total flux cleaned = 0.00169832 Jy
! Component: 2000  -  total flux cleaned = 0.00178157 Jy
! Component: 2050  -  total flux cleaned = 0.00190425 Jy
! Component: 2100  -  total flux cleaned = 0.00206423 Jy
! Component: 2150  -  total flux cleaned = 0.00206496 Jy
! Component: 2200  -  total flux cleaned = 0.00233861 Jy
! Component: 2250  -  total flux cleaned = 0.0023766 Jy
! Component: 2300  -  total flux cleaned = 0.00245211 Jy
! Component: 2350  -  total flux cleaned = 0.00248972 Jy
! Component: 2400  -  total flux cleaned = 0.00249008 Jy
! Component: 2450  -  total flux cleaned = 0.00260057 Jy
! Component: 2500  -  total flux cleaned = 0.00263659 Jy
! Component: 2550  -  total flux cleaned = 0.00281574 Jy
! Component: 2600  -  total flux cleaned = 0.00281551 Jy
! Component: 2650  -  total flux cleaned = 0.00285098 Jy
! Component: 2700  -  total flux cleaned = 0.00298963 Jy
! Component: 2750  -  total flux cleaned = 0.00309208 Jy
! Component: 2800  -  total flux cleaned = 0.0029908 Jy
! Component: 2850  -  total flux cleaned = 0.00319191 Jy
! Component: 2900  -  total flux cleaned = 0.00315824 Jy
! Component: 2950  -  total flux cleaned = 0.00315856 Jy
! Component: 3000  -  total flux cleaned = 0.0033209 Jy
! Component: 3050  -  total flux cleaned = 0.00325616 Jy
! Component: 3100  -  total flux cleaned = 0.00322471 Jy
! Component: 3150  -  total flux cleaned = 0.0033509 Jy
! Component: 3200  -  total flux cleaned = 0.00331929 Jy
! Component: 3250  -  total flux cleaned = 0.00350419 Jy
! Component: 3300  -  total flux cleaned = 0.00350364 Jy
! Component: 3350  -  total flux cleaned = 0.00353389 Jy
! Component: 3400  -  total flux cleaned = 0.00353395 Jy
! Component: 3450  -  total flux cleaned = 0.00353387 Jy
! Component: 3500  -  total flux cleaned = 0.00356314 Jy
! Component: 3550  -  total flux cleaned = 0.00362123 Jy
! Component: 3600  -  total flux cleaned = 0.00362151 Jy
! Component: 3650  -  total flux cleaned = 0.00373662 Jy
! Component: 3700  -  total flux cleaned = 0.00376529 Jy
! Component: 3750  -  total flux cleaned = 0.00387804 Jy
! Component: 3800  -  total flux cleaned = 0.00379363 Jy
! Component: 3850  -  total flux cleaned = 0.00371067 Jy
! Component: 3900  -  total flux cleaned = 0.00384917 Jy
! Component: 3950  -  total flux cleaned = 0.00395872 Jy
! Component: 4000  -  total flux cleaned = 0.00401307 Jy
! Component: 4050  -  total flux cleaned = 0.00406725 Jy
! Total flux subtracted in 4096 components = 0.00406714 Jy
! Clean residual min=-0.001895 max=0.001398 Jy/beam
! Clean residual mean=0.000003 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 2.79575 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 551 components and 2.79575 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1337-1257_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.025 x 16.56 at -14.24 degrees (North through East)
! Clean map  min=-0.014715  max=2.6328 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1337-1257_S_b_map.fits
wmodel /image_prod/ug002_uva//J1337-1257_S_b_map.mod
! Writing 551 model components to file: /image_prod/ug002_uva//J1337-1257_S_b_map.mod
wobs   /image_prod/ug002_uva//J1337-1257_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1337-1257_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1337-1257_S_b_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1337-1257_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.63285 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000514519 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0586269 0.0586269 0.117254 0.234508 0.469015 0.938031 1.87606 3.75212 7.50424 15.0085 30.017 60.034
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.632 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5117.1 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1337-1257_S_b_dfm.log closed on Thu Mar  5 01:19:51 2020