! Started logfile: /image_prod/ug002_uva//J1335-0511_X_dfm.log on Thu Mar  5 01:18:45 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1335-0511_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1335-0511_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.917037 visibilities/baseline/integration-bin.
! Found source: J1335-0511
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 29712 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1335-0511_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005954Jy  sigma=9.238678
! Fit after  self-cal, rms=0.919158Jy  sigma=8.452593
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7593 mas, bmaj=3.596 mas, bpa=-16.21 degrees
! Estimated noise=0.731159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0592582 Jy
! Component: 100  -  total flux cleaned = 0.0759278 Jy
! Total flux subtracted in 100 components = 0.0759278 Jy
! Clean residual min=-0.005083 max=0.011178 Jy/beam
! Clean residual mean=0.000017 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.0759278 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0759278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074698Jy  sigma=0.590953
! Fit after  self-cal, rms=0.074367Jy  sigma=0.587553
! Inverting map 
! Added new window around map position (1.4, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116253 Jy
! Component: 100  -  total flux cleaned = 0.0193199 Jy
! Total flux subtracted in 100 components = 0.0193199 Jy
! Clean residual min=-0.004134 max=0.007660 Jy/beam
! Clean residual mean=0.000014 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.0952476 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.0952477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071178Jy  sigma=0.554416
! Fit after  self-cal, rms=0.071123Jy  sigma=0.553612
! Inverting map 
! Added new window around map position (3, 3.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00754963 Jy
! Component: 100  -  total flux cleaned = 0.0125592 Jy
! Total flux subtracted in 100 components = 0.0125592 Jy
! Clean residual min=-0.003791 max=0.004561 Jy/beam
! Clean residual mean=0.000012 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.107807 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.107807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069682Jy  sigma=0.538296
! Fit after  self-cal, rms=0.069598Jy  sigma=0.537135
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.02 mas, bmaj=3.742 mas, bpa=-15.22 degrees
! Estimated noise=0.452219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0087434 Jy
! Component: 100  -  total flux cleaned = 0.0146038 Jy
! Component: 150  -  total flux cleaned = 0.0190213 Jy
! Component: 200  -  total flux cleaned = 0.0224302 Jy
! Total flux subtracted in 200 components = 0.0224302 Jy
! Clean residual min=-0.003750 max=0.004725 Jy/beam
! Clean residual mean=0.000013 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.130237 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 127 components and 0.130237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068232Jy  sigma=0.522305
! Fit after  self-cal, rms=0.068107Jy  sigma=0.520484
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.02 x 3.742 at -15.22 degrees (North through East)
! Clean map  min=-0.0030987  max=0.076157 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        1.05     
!   LA        1.00     MK        1.06     NL        1.10     OV        0.93     
!   PT        0.86     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        1.07     
!   LA        1.03     MK        1.08     NL        1.09     OV        0.94     
!   PT        0.83     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        1.07     KP        1.03     
!   LA        0.98     MK        1.00     NL        1.12     OV        0.96     
!   PT        0.87     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.04     KP        1.04     
!   LA        1.00     MK        1.02     NL        1.09     OV        0.98     
!   PT        0.85     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.94     KP        1.02     
!   LA        0.99     MK        1.02     NL        1.17     OV        0.98     
!   PT        0.85     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.93     KP        1.02     
!   LA        1.02     MK        1.03     NL        1.12     OV        0.98     
!   PT        0.85     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.05     
!   LA        1.01     MK        0.98     NL        1.11     OV        0.97     
!   PT        0.85     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.04     KP        1.03     
!   LA        1.01     MK        1.01     NL        1.08     OV        0.95     
!   PT        0.87     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        1.06     
!   LA        1.01     MK        1.02     NL        1.12     OV        0.95     
!   PT        0.85     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.95     KP        1.04     
!   LA        1.00     MK        1.01     NL        1.11     OV        0.91     
!   PT        0.86     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.95     KP        1.07     
!   LA        1.02     MK        1.00     NL        1.17     OV        0.94     
!   PT        0.82     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.98     KP        1.09     
!   LA        1.02     MK        0.99     NL        1.09     OV        0.96     
!   PT        0.85     
! 
! 
! Fit before self-cal, rms=0.068107Jy  sigma=0.520484
! Fit after  self-cal, rms=0.064046Jy  sigma=0.513606
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.03 mas, bmaj=3.756 mas, bpa=-15.09 degrees
! Estimated noise=0.448978 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.8, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336814 Jy
! Component: 100  -  total flux cleaned = 0.00442752 Jy
! Component: 150  -  total flux cleaned = 0.00492354 Jy
! Component: 200  -  total flux cleaned = 0.00508924 Jy
! Total flux subtracted in 200 components = 0.00508924 Jy
! Clean residual min=-0.001331 max=0.001470 Jy/beam
! Clean residual mean=0.000004 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.135326 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 162 components and 0.135326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063857Jy  sigma=0.511377
! Fit after  self-cal, rms=0.063834Jy  sigma=0.510953
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063834Jy  sigma=0.510953
! Fit after  self-cal, rms=0.063407Jy  sigma=0.509759
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.031 mas, bmaj=3.751 mas, bpa=-15.08 degrees
! Estimated noise=0.449532 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000725323 Jy
! Component: 100  -  total flux cleaned = 0.00126428 Jy
! Component: 150  -  total flux cleaned = 0.00153577 Jy
! Component: 200  -  total flux cleaned = 0.00168753 Jy
! Total flux subtracted in 200 components = 0.00168753 Jy
! Clean residual min=-0.001150 max=0.001134 Jy/beam
! Clean residual mean=0.000005 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.137014 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 180 components and 0.137014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063366Jy  sigma=0.509321
! Fit after  self-cal, rms=0.063362Jy  sigma=0.509202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242194 Jy
! Component: 100  -  total flux cleaned = 0.000401956 Jy
! Component: 150  -  total flux cleaned = 0.000512687 Jy
! Component: 200  -  total flux cleaned = 0.000512931 Jy
! Total flux subtracted in 200 components = 0.000512931 Jy
! Clean residual min=-0.001099 max=0.001080 Jy/beam
! Clean residual mean=0.000004 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.137527 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 209 components and 0.137527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063342Jy  sigma=0.509011
! Fit after  self-cal, rms=0.063337Jy  sigma=0.508970
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063337Jy  sigma=0.508970
! Fit after  self-cal, rms=0.063584Jy  sigma=0.508938
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=3.749 mas, bpa=-15.08 degrees
! Estimated noise=0.450387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396383 Jy
! Component: 100  -  total flux cleaned = 0.00071918 Jy
! Component: 150  -  total flux cleaned = 0.000898149 Jy
! Component: 200  -  total flux cleaned = 0.00100946 Jy
! Total flux subtracted in 200 components = 0.00100946 Jy
! Clean residual min=-0.001070 max=0.001067 Jy/beam
! Clean residual mean=0.000004 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.138536 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 232 components and 0.138536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063571Jy  sigma=0.508795
! Fit after  self-cal, rms=0.063571Jy  sigma=0.508763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168262 Jy
! Component: 100  -  total flux cleaned = 0.00027629 Jy
! Component: 150  -  total flux cleaned = 0.000352394 Jy
! Component: 200  -  total flux cleaned = 0.000435931 Jy
! Total flux subtracted in 200 components = 0.000435931 Jy
! Clean residual min=-0.001020 max=0.001027 Jy/beam
! Clean residual mean=0.000004 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.138972 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 246 components and 0.138972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063561Jy  sigma=0.508677
! Fit after  self-cal, rms=0.063558Jy  sigma=0.508660
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063558Jy  sigma=0.508660
! Fit after  self-cal, rms=0.063655Jy  sigma=0.508647
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=4.129 mas, bpa=-4.3 degrees
! Estimated noise=0.520601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632574 Jy
! Component: 100  -  total flux cleaned = 0.00087282 Jy
! Component: 150  -  total flux cleaned = 0.00104352 Jy
! Component: 200  -  total flux cleaned = 0.0011836 Jy
! Total flux subtracted in 200 components = 0.0011836 Jy
! Clean residual min=-0.001352 max=0.001278 Jy/beam
! Clean residual mean=0.000006 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.140156 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 274 components and 0.140156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063647Jy  sigma=0.508583
! Fit after  self-cal, rms=0.063643Jy  sigma=0.508542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175218 Jy
! Component: 100  -  total flux cleaned = 0.000351531 Jy
! Component: 150  -  total flux cleaned = 0.000422487 Jy
! Component: 200  -  total flux cleaned = 0.000462817 Jy
! Total flux subtracted in 200 components = 0.000462817 Jy
! Clean residual min=-0.001312 max=0.001254 Jy/beam
! Clean residual mean=0.000006 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.140618 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 286 components and 0.140618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063638Jy  sigma=0.508503
! Fit after  self-cal, rms=0.063636Jy  sigma=0.508489
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=3.747 mas, bpa=-15.08 degrees
! Estimated noise=0.450741 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.032 x 3.747 at -15.08 degrees (North through East)
! Clean map  min=-0.00093593  max=0.074497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7656 mas, bmaj=3.592 mas, bpa=-16.14 degrees
! Estimated noise=0.737258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0593472 Jy
! Component: 100  -  total flux cleaned = 0.0780046 Jy
! Component: 150  -  total flux cleaned = 0.0902085 Jy
! Component: 200  -  total flux cleaned = 0.0990772 Jy
! Total flux subtracted in 200 components = 0.0990772 Jy
! Clean residual min=-0.003334 max=0.005060 Jy/beam
! Clean residual mean=0.000009 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.0990772 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0990772 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=3.747 mas, bpa=-15.08 degrees
! Estimated noise=0.450741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108081 Jy
! Component: 100  -  total flux cleaned = 0.017937 Jy
! Component: 150  -  total flux cleaned = 0.0231067 Jy
! Component: 200  -  total flux cleaned = 0.0270007 Jy
! Total flux subtracted in 200 components = 0.0270007 Jy
! Clean residual min=-0.001790 max=0.002529 Jy/beam
! Clean residual mean=0.000009 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.126078 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 119 components and 0.126078 Jy
! Inverting map 
! Added new window around map position (-5.2, 15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030637 Jy
! Component: 100  -  total flux cleaned = 0.0054514 Jy
! Component: 150  -  total flux cleaned = 0.00735453 Jy
! Component: 200  -  total flux cleaned = 0.00890307 Jy
! Total flux subtracted in 200 components = 0.00890307 Jy
! Clean residual min=-0.001305 max=0.001124 Jy/beam
! Clean residual mean=0.000006 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.134981 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 172 components and 0.134981 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=4.129 mas, bpa=-4.3 degrees
! Estimated noise=0.520601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184456 Jy
! Component: 100  -  total flux cleaned = 0.00317048 Jy
! Component: 150  -  total flux cleaned = 0.00396192 Jy
! Component: 200  -  total flux cleaned = 0.00450199 Jy
! Total flux subtracted in 200 components = 0.00450199 Jy
! Clean residual min=-0.001400 max=0.001245 Jy/beam
! Clean residual mean=0.000006 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.139483 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000422711 Jy
! Component: 100  -  total flux cleaned = 0.000639276 Jy
! Component: 150  -  total flux cleaned = 0.000747475 Jy
! Component: 200  -  total flux cleaned = 0.000826843 Jy
! Total flux subtracted in 200 components = 0.000826843 Jy
! Clean residual min=-0.001320 max=0.001234 Jy/beam
! Clean residual mean=0.000006 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.14031 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 265 components and 0.14031 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=3.747 mas, bpa=-15.08 degrees
! Estimated noise=0.450741 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.31273e-05 Jy
! Component: 100  -  total flux cleaned = -5.73913e-07 Jy
! Component: 150  -  total flux cleaned = 1.88518e-05 Jy
! Component: 200  -  total flux cleaned = 5.49868e-05 Jy
! Total flux subtracted in 200 components = 5.49868e-05 Jy
! Clean residual min=-0.001000 max=0.000952 Jy/beam
! Clean residual mean=0.000004 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.140365 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 289 components and 0.140365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063630Jy  sigma=0.508449
! Fit after  self-cal, rms=0.063615Jy  sigma=0.508393
wmodel J1335-0511_X_map.mod
! Writing 289 model components to file: J1335-0511_X_map.mod
wobs   J1335-0511_X_uvs.fits
! Writing UV FITS file: J1335-0511_X_uvs.fits
wwins  J1335-0511_X_map.win
! wwins: Wrote 5 windows to J1335-0511_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152411 Jy
! Component: 100  -  total flux cleaned = -0.0001359 Jy
! Component: 150  -  total flux cleaned = -0.000103672 Jy
! Component: 200  -  total flux cleaned = -9.8879e-06 Jy
! Component: 250  -  total flux cleaned = 5.06729e-05 Jy
! Component: 300  -  total flux cleaned = 5.09315e-05 Jy
! Component: 350  -  total flux cleaned = 3.68039e-05 Jy
! Component: 400  -  total flux cleaned = 3.68558e-05 Jy
! Component: 450  -  total flux cleaned = 5.04422e-05 Jy
! Component: 500  -  total flux cleaned = -1.77451e-05 Jy
! Component: 550  -  total flux cleaned = 2.20565e-05 Jy
! Component: 600  -  total flux cleaned = -4.40727e-06 Jy
! Component: 650  -  total flux cleaned = -1.71198e-05 Jy
! Component: 700  -  total flux cleaned = -4.13767e-06 Jy
! Component: 750  -  total flux cleaned = -3.96716e-06 Jy
! Component: 800  -  total flux cleaned = 2.05818e-05 Jy
! Component: 850  -  total flux cleaned = 4.45465e-05 Jy
! Component: 900  -  total flux cleaned = -2.83017e-06 Jy
! Component: 950  -  total flux cleaned = 2.0726e-05 Jy
! Component: 1000  -  total flux cleaned = 9.14939e-06 Jy
! Component: 1050  -  total flux cleaned = -2.24631e-06 Jy
! Component: 1100  -  total flux cleaned = -2.44789e-05 Jy
! Component: 1150  -  total flux cleaned = -4.62705e-05 Jy
! Component: 1200  -  total flux cleaned = -5.72257e-05 Jy
! Component: 1250  -  total flux cleaned = -5.73042e-05 Jy
! Component: 1300  -  total flux cleaned = -0.000131221 Jy
! Component: 1350  -  total flux cleaned = -0.000151893 Jy
! Component: 1400  -  total flux cleaned = -0.000141635 Jy
! Component: 1450  -  total flux cleaned = -0.000172277 Jy
! Component: 1500  -  total flux cleaned = -0.000202515 Jy
! Component: 1550  -  total flux cleaned = -0.00024213 Jy
! Component: 1600  -  total flux cleaned = -0.000281166 Jy
! Component: 1650  -  total flux cleaned = -0.000281123 Jy
! Component: 1700  -  total flux cleaned = -0.000329189 Jy
! Component: 1750  -  total flux cleaned = -0.000348143 Jy
! Component: 1800  -  total flux cleaned = -0.000413855 Jy
! Component: 1850  -  total flux cleaned = -0.000423034 Jy
! Component: 1900  -  total flux cleaned = -0.000450607 Jy
! Component: 1950  -  total flux cleaned = -0.000523354 Jy
! Component: 2000  -  total flux cleaned = -0.000523464 Jy
! Component: 2050  -  total flux cleaned = -0.000603751 Jy
! Component: 2100  -  total flux cleaned = -0.000647925 Jy
! Component: 2150  -  total flux cleaned = -0.000682988 Jy
! Component: 2200  -  total flux cleaned = -0.000708964 Jy
! Component: 2250  -  total flux cleaned = -0.000743316 Jy
! Component: 2300  -  total flux cleaned = -0.000768825 Jy
! Component: 2350  -  total flux cleaned = -0.000811028 Jy
! Component: 2400  -  total flux cleaned = -0.000827799 Jy
! Component: 2450  -  total flux cleaned = -0.000869314 Jy
! Component: 2500  -  total flux cleaned = -0.000910397 Jy
! Component: 2550  -  total flux cleaned = -0.000967331 Jy
! Component: 2600  -  total flux cleaned = -0.000999546 Jy
! Component: 2650  -  total flux cleaned = -0.00103146 Jy
! Component: 2700  -  total flux cleaned = -0.00107902 Jy
! Component: 2750  -  total flux cleaned = -0.00111043 Jy
! Component: 2800  -  total flux cleaned = -0.00116498 Jy
! Component: 2850  -  total flux cleaned = -0.0011881 Jy
! Component: 2900  -  total flux cleaned = -0.0011805 Jy
! Component: 2950  -  total flux cleaned = -0.00124141 Jy
! Component: 3000  -  total flux cleaned = -0.00127908 Jy
! Component: 3050  -  total flux cleaned = -0.00132394 Jy
! Component: 3100  -  total flux cleaned = -0.00133133 Jy
! Component: 3150  -  total flux cleaned = -0.00137549 Jy
! Component: 3200  -  total flux cleaned = -0.00136817 Jy
! Component: 3250  -  total flux cleaned = -0.00139716 Jy
! Component: 3300  -  total flux cleaned = -0.00141159 Jy
! Component: 3350  -  total flux cleaned = -0.00141171 Jy
! Component: 3400  -  total flux cleaned = -0.00147552 Jy
! Component: 3450  -  total flux cleaned = -0.00150357 Jy
! Component: 3500  -  total flux cleaned = -0.00151759 Jy
! Component: 3550  -  total flux cleaned = -0.00155217 Jy
! Component: 3600  -  total flux cleaned = -0.0015522 Jy
! Component: 3650  -  total flux cleaned = -0.0015728 Jy
! Component: 3700  -  total flux cleaned = -0.00159318 Jy
! Component: 3750  -  total flux cleaned = -0.00162014 Jy
! Component: 3800  -  total flux cleaned = -0.00161345 Jy
! Component: 3850  -  total flux cleaned = -0.00165318 Jy
! Component: 3900  -  total flux cleaned = -0.00166624 Jy
! Component: 3950  -  total flux cleaned = -0.00168582 Jy
! Component: 4000  -  total flux cleaned = -0.00169888 Jy
! Component: 4050  -  total flux cleaned = -0.00167957 Jy
! Total flux subtracted in 4096 components = -0.00171161 Jy
! Clean residual min=-0.000360 max=0.000453 Jy/beam
! Clean residual mean=0.000002 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.138653 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 594 components and 0.138653 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1335-0511_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.032 x 3.747 at -15.08 degrees (North through East)
! Clean map  min=-0.00074259  max=0.074596 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1335-0511_X_map.fits
wmodel /image_prod/ug002_uva//J1335-0511_X_map.mod
! Writing 594 model components to file: /image_prod/ug002_uva//J1335-0511_X_map.mod
wobs   /image_prod/ug002_uva//J1335-0511_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1335-0511_X_uvs.fits
wwins  /image_prod/ug002_uva//J1335-0511_X_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1335-0511_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0745957 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120836 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.485964 0.485964 0.971929 1.94386 3.88772 7.77543 15.5509 31.1017 62.2034
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.074 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  617.329 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1335-0511_X_dfm.log closed on Thu Mar  5 01:18:50 2020