! Started logfile: /image_prod/ug002_uva//J1333-2356_S_dfm.log on Thu Mar  5 01:17:40 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1333-2356_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1333-2356_S_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.984 visibilities/baseline/integration-bin.
! Found source: J1333-2356
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6642 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1333-2356_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011214Jy  sigma=6.845498
! Fit after  self-cal, rms=0.885681Jy  sigma=6.006128
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.712 mas, bmaj=7.045 mas, bpa=-4.795 degrees
! Estimated noise=1.90527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0881729 Jy
! Component: 100  -  total flux cleaned = 0.111976 Jy
! Total flux subtracted in 100 components = 0.111976 Jy
! Clean residual min=-0.004847 max=0.009625 Jy/beam
! Clean residual mean=-0.000011 rms=0.001461 Jy/beam
! Combined flux in latest and established models = 0.111976 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.111976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090594Jy  sigma=0.484934
! Fit after  self-cal, rms=0.090588Jy  sigma=0.484753
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102288 Jy
! Component: 100  -  total flux cleaned = 0.0153951 Jy
! Total flux subtracted in 100 components = 0.0153951 Jy
! Clean residual min=-0.004302 max=0.006762 Jy/beam
! Clean residual mean=0.000000 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.127371 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.127371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089115Jy  sigma=0.474778
! Fit after  self-cal, rms=0.089112Jy  sigma=0.474695
! Inverting map 
! Added new window around map position (4.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573438 Jy
! Component: 100  -  total flux cleaned = 0.00685242 Jy
! Total flux subtracted in 100 components = 0.00685242 Jy
! Clean residual min=-0.004268 max=0.004244 Jy/beam
! Clean residual mean=0.000005 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.134223 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 27 components and 0.134223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088613Jy  sigma=0.472408
! Fit after  self-cal, rms=0.088538Jy  sigma=0.472056
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.224 mas, bmaj=8.202 mas, bpa=-4.165 degrees
! Estimated noise=1.33136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254315 Jy
! Component: 100  -  total flux cleaned = 0.00286209 Jy
! Component: 150  -  total flux cleaned = 0.00296615 Jy
! Component: 200  -  total flux cleaned = 0.00305643 Jy
! Total flux subtracted in 200 components = 0.00305643 Jy
! Clean residual min=-0.004116 max=0.003452 Jy/beam
! Clean residual mean=0.000015 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.13728 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.13728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088355Jy  sigma=0.471567
! Fit after  self-cal, rms=0.088339Jy  sigma=0.471496
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.224 x 8.202 at -4.165 degrees (North through East)
! Clean map  min=-0.003946  max=0.11335 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.11     KP        0.99     
!   LA        1.02     MK        0.98     NL        0.98     OV        1.06     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        0.95     HN        1.16     KP        1.03     
!   LA        1.09     MK        0.95     NL        1.14     OV        0.94     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.06     KP        1.02     
!   LA        0.99     MK        1.01     NL        0.84     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.088339Jy  sigma=0.471496
! Fit after  self-cal, rms=0.082176Jy  sigma=0.465615
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.229 mas, bmaj=8.167 mas, bpa=-4.365 degrees
! Estimated noise=1.33912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100197 Jy
! Component: 100  -  total flux cleaned = 0.00106451 Jy
! Component: 150  -  total flux cleaned = 0.00108985 Jy
! Component: 200  -  total flux cleaned = 0.00108914 Jy
! Total flux subtracted in 200 components = 0.00108914 Jy
! Clean residual min=-0.003081 max=0.002744 Jy/beam
! Clean residual mean=0.000009 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.138369 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.138369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082137Jy  sigma=0.465510
! Fit after  self-cal, rms=0.082178Jy  sigma=0.465378
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082178Jy  sigma=0.465378
! Fit after  self-cal, rms=0.077803Jy  sigma=0.460514
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.228 mas, bmaj=8.138 mas, bpa=-4.516 degrees
! Estimated noise=1.33611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.60934e-05 Jy
! Component: 100  -  total flux cleaned = -8.59459e-05 Jy
! Component: 150  -  total flux cleaned = -8.46396e-05 Jy
! Component: 200  -  total flux cleaned = -8.48773e-05 Jy
! Total flux subtracted in 200 components = -8.48773e-05 Jy
! Clean residual min=-0.002020 max=0.002009 Jy/beam
! Clean residual mean=0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.138284 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.138284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077789Jy  sigma=0.460444
! Fit after  self-cal, rms=0.077785Jy  sigma=0.460367
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.58139e-06 Jy
! Component: 100  -  total flux cleaned = -8.11709e-06 Jy
! Component: 150  -  total flux cleaned = -7.77462e-06 Jy
! Component: 200  -  total flux cleaned = -1.84028e-05 Jy
! Total flux subtracted in 200 components = -1.84028e-05 Jy
! Clean residual min=-0.002060 max=0.002014 Jy/beam
! Clean residual mean=0.000002 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.138266 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.138266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077779Jy  sigma=0.460344
! Fit after  self-cal, rms=0.077779Jy  sigma=0.460343
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077779Jy  sigma=0.460343
! Fit after  self-cal, rms=0.077828Jy  sigma=0.460327
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.225 mas, bmaj=8.121 mas, bpa=-4.605 degrees
! Estimated noise=1.33629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.82189e-05 Jy
! Component: 100  -  total flux cleaned = 2.12687e-05 Jy
! Component: 150  -  total flux cleaned = 2.14786e-05 Jy
! Component: 200  -  total flux cleaned = 3.18449e-05 Jy
! Total flux subtracted in 200 components = 3.18449e-05 Jy
! Clean residual min=-0.002009 max=0.002008 Jy/beam
! Clean residual mean=0.000002 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.138298 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.138298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077823Jy  sigma=0.460305
! Fit after  self-cal, rms=0.077824Jy  sigma=0.460302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.89198e-05 Jy
! Component: 100  -  total flux cleaned = 8.91631e-06 Jy
! Component: 150  -  total flux cleaned = 8.9347e-06 Jy
! Component: 200  -  total flux cleaned = 9.08099e-06 Jy
! Total flux subtracted in 200 components = 9.08099e-06 Jy
! Clean residual min=-0.002014 max=0.002004 Jy/beam
! Clean residual mean=0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.138307 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.138307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077820Jy  sigma=0.460292
! Fit after  self-cal, rms=0.077820Jy  sigma=0.460290
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077820Jy  sigma=0.460290
! Fit after  self-cal, rms=0.077816Jy  sigma=0.460286
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.807 mas, bmaj=17.84 mas, bpa=-1.031 degrees
! Estimated noise=1.62619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219577 Jy
! Component: 100  -  total flux cleaned = 0.000228012 Jy
! Component: 150  -  total flux cleaned = 0.000255528 Jy
! Component: 200  -  total flux cleaned = 0.000270884 Jy
! Total flux subtracted in 200 components = 0.000270884 Jy
! Clean residual min=-0.001955 max=0.001968 Jy/beam
! Clean residual mean=0.000004 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.138578 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 76 components and 0.138578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077817Jy  sigma=0.460311
! Fit after  self-cal, rms=0.077815Jy  sigma=0.460304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.45302e-05 Jy
! Component: 100  -  total flux cleaned = 8.14173e-05 Jy
! Component: 150  -  total flux cleaned = 9.65001e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109957 Jy
! Total flux subtracted in 200 components = 0.000109957 Jy
! Clean residual min=-0.001945 max=0.001958 Jy/beam
! Clean residual mean=0.000004 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.138688 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 78 components and 0.138688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077816Jy  sigma=0.460315
! Fit after  self-cal, rms=0.077815Jy  sigma=0.460312
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=8.111 mas, bpa=-4.675 degrees
! Estimated noise=1.33602 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.222 x 8.111 at -4.675 degrees (North through East)
! Clean map  min=-0.0018893  max=0.11334 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.715 mas, bmaj=6.977 mas, bpa=-5.22 degrees
! Estimated noise=1.89683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0877171 Jy
! Component: 100  -  total flux cleaned = 0.112142 Jy
! Component: 150  -  total flux cleaned = 0.122669 Jy
! Component: 200  -  total flux cleaned = 0.128523 Jy
! Total flux subtracted in 200 components = 0.128523 Jy
! Clean residual min=-0.003677 max=0.003755 Jy/beam
! Clean residual mean=-0.000006 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.128523 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.128523 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=8.111 mas, bpa=-4.675 degrees
! Estimated noise=1.33602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00492447 Jy
! Component: 100  -  total flux cleaned = 0.00757793 Jy
! Component: 150  -  total flux cleaned = 0.00914632 Jy
! Component: 200  -  total flux cleaned = 0.00971616 Jy
! Total flux subtracted in 200 components = 0.00971616 Jy
! Clean residual min=-0.002007 max=0.002124 Jy/beam
! Clean residual mean=0.000002 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.138239 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 56 components and 0.138239 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.807 mas, bmaj=17.84 mas, bpa=-1.031 degrees
! Estimated noise=1.62619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112477 Jy
! Component: 100  -  total flux cleaned = 0.00109975 Jy
! Component: 150  -  total flux cleaned = 0.00110122 Jy
! Component: 200  -  total flux cleaned = 0.00106118 Jy
! Total flux subtracted in 200 components = 0.00106118 Jy
! Clean residual min=-0.001964 max=0.001909 Jy/beam
! Clean residual mean=0.000007 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.1393 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.78138e-05 Jy
! Component: 100  -  total flux cleaned = -1.73077e-05 Jy
! Component: 150  -  total flux cleaned = -1.76859e-05 Jy
! Component: 200  -  total flux cleaned = -3.24244e-06 Jy
! Total flux subtracted in 200 components = -3.24244e-06 Jy
! Clean residual min=-0.001958 max=0.001874 Jy/beam
! Clean residual mean=0.000006 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.139297 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.139297 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=8.111 mas, bpa=-4.675 degrees
! Estimated noise=1.33602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209733 Jy
! Component: 100  -  total flux cleaned = -0.000209749 Jy
! Component: 150  -  total flux cleaned = -0.000229766 Jy
! Component: 200  -  total flux cleaned = -0.000229624 Jy
! Total flux subtracted in 200 components = -0.000229624 Jy
! Clean residual min=-0.001967 max=0.002042 Jy/beam
! Clean residual mean=0.000003 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.139067 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.139067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077810Jy  sigma=0.460308
! Fit after  self-cal, rms=0.077803Jy  sigma=0.460279
wmodel J1333-2356_S_map.mod
! Writing 84 model components to file: J1333-2356_S_map.mod
wobs   J1333-2356_S_uvs.fits
! Writing UV FITS file: J1333-2356_S_uvs.fits
wwins  J1333-2356_S_map.win
! wwins: Wrote 3 windows to J1333-2356_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141887 Jy
! Component: 100  -  total flux cleaned = -0.000381461 Jy
! Component: 150  -  total flux cleaned = -0.000639713 Jy
! Component: 200  -  total flux cleaned = -0.000951561 Jy
! Component: 250  -  total flux cleaned = -0.00116236 Jy
! Component: 300  -  total flux cleaned = -0.00130811 Jy
! Component: 350  -  total flux cleaned = -0.00139299 Jy
! Component: 400  -  total flux cleaned = -0.00150265 Jy
! Component: 450  -  total flux cleaned = -0.00158325 Jy
! Component: 500  -  total flux cleaned = -0.0016622 Jy
! Component: 550  -  total flux cleaned = -0.00171348 Jy
! Component: 600  -  total flux cleaned = -0.00178841 Jy
! Component: 650  -  total flux cleaned = -0.00186171 Jy
! Component: 700  -  total flux cleaned = -0.00191038 Jy
! Component: 750  -  total flux cleaned = -0.0020291 Jy
! Component: 800  -  total flux cleaned = -0.00214584 Jy
! Component: 850  -  total flux cleaned = -0.00219146 Jy
! Component: 900  -  total flux cleaned = -0.00230494 Jy
! Component: 950  -  total flux cleaned = -0.00237192 Jy
! Component: 1000  -  total flux cleaned = -0.00248159 Jy
! Component: 1050  -  total flux cleaned = -0.00258946 Jy
! Component: 1100  -  total flux cleaned = -0.00269629 Jy
! Component: 1150  -  total flux cleaned = -0.00284317 Jy
! Component: 1200  -  total flux cleaned = -0.002926 Jy
! Component: 1250  -  total flux cleaned = -0.00306874 Jy
! Component: 1300  -  total flux cleaned = -0.00318966 Jy
! Component: 1350  -  total flux cleaned = -0.00324927 Jy
! Component: 1400  -  total flux cleaned = -0.0033674 Jy
! Component: 1450  -  total flux cleaned = -0.00346428 Jy
! Component: 1500  -  total flux cleaned = -0.0035603 Jy
! Component: 1550  -  total flux cleaned = -0.00371226 Jy
! Component: 1600  -  total flux cleaned = -0.00376819 Jy
! Component: 1650  -  total flux cleaned = -0.00393498 Jy
! Component: 1700  -  total flux cleaned = -0.00397155 Jy
! Component: 1750  -  total flux cleaned = -0.00408011 Jy
! Component: 1800  -  total flux cleaned = -0.00422334 Jy
! Component: 1850  -  total flux cleaned = -0.00429404 Jy
! Component: 1900  -  total flux cleaned = -0.00445182 Jy
! Component: 1950  -  total flux cleaned = -0.00455582 Jy
! Component: 2000  -  total flux cleaned = -0.00469291 Jy
! Component: 2050  -  total flux cleaned = -0.00474387 Jy
! Component: 2100  -  total flux cleaned = -0.00482829 Jy
! Component: 2150  -  total flux cleaned = -0.00496151 Jy
! Component: 2200  -  total flux cleaned = -0.0049946 Jy
! Component: 2250  -  total flux cleaned = -0.00509286 Jy
! Component: 2300  -  total flux cleaned = -0.00520646 Jy
! Component: 2350  -  total flux cleaned = -0.00533508 Jy
! Component: 2400  -  total flux cleaned = -0.00538284 Jy
! Component: 2450  -  total flux cleaned = -0.00544617 Jy
! Component: 2500  -  total flux cleaned = -0.00557158 Jy
! Component: 2550  -  total flux cleaned = -0.00564926 Jy
! Component: 2600  -  total flux cleaned = -0.00574176 Jy
! Component: 2650  -  total flux cleaned = -0.00580277 Jy
! Component: 2700  -  total flux cleaned = -0.00589367 Jy
! Component: 2750  -  total flux cleaned = -0.00598376 Jy
! Component: 2800  -  total flux cleaned = -0.00602846 Jy
! Component: 2850  -  total flux cleaned = -0.00607277 Jy
! Component: 2900  -  total flux cleaned = -0.00614646 Jy
! Component: 2950  -  total flux cleaned = -0.00623394 Jy
! Component: 3000  -  total flux cleaned = -0.00630618 Jy
! Component: 3050  -  total flux cleaned = -0.0063637 Jy
! Component: 3100  -  total flux cleaned = -0.00643484 Jy
! Component: 3150  -  total flux cleaned = -0.00651959 Jy
! Component: 3200  -  total flux cleaned = -0.00656154 Jy
! Component: 3250  -  total flux cleaned = -0.00660326 Jy
! Component: 3300  -  total flux cleaned = -0.00663088 Jy
! Component: 3350  -  total flux cleaned = -0.00671318 Jy
! Component: 3400  -  total flux cleaned = -0.00674034 Jy
! Component: 3450  -  total flux cleaned = -0.00678089 Jy
! Component: 3500  -  total flux cleaned = -0.00682108 Jy
! Component: 3550  -  total flux cleaned = -0.00684764 Jy
! Component: 3600  -  total flux cleaned = -0.0069005 Jy
! Component: 3650  -  total flux cleaned = -0.00690068 Jy
! Component: 3700  -  total flux cleaned = -0.00696605 Jy
! Component: 3750  -  total flux cleaned = -0.00697904 Jy
! Component: 3800  -  total flux cleaned = -0.00695332 Jy
! Component: 3850  -  total flux cleaned = -0.00703012 Jy
! Component: 3900  -  total flux cleaned = -0.00700451 Jy
! Component: 3950  -  total flux cleaned = -0.00701719 Jy
! Component: 4000  -  total flux cleaned = -0.00701719 Jy
! Component: 4050  -  total flux cleaned = -0.00702977 Jy
! Total flux subtracted in 4096 components = -0.00701735 Jy
! Clean residual min=-0.000751 max=0.000654 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.13205 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 363 components and 0.13205 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1333-2356_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.222 x 8.111 at -4.675 degrees (North through East)
! Clean map  min=-0.0015915  max=0.11334 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1333-2356_S_map.fits
wmodel /image_prod/ug002_uva//J1333-2356_S_map.mod
! Writing 363 model components to file: /image_prod/ug002_uva//J1333-2356_S_map.mod
wobs   /image_prod/ug002_uva//J1333-2356_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1333-2356_S_uvs.fits
wwins  /image_prod/ug002_uva//J1333-2356_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1333-2356_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.113342 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226839 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.60041 0.60041 1.20082 2.40164 4.80328 9.60655 19.2131 38.4262 76.8524
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  499.658 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1333-2356_S_dfm.log closed on Thu Mar  5 01:17:43 2020