! Started logfile: /image_prod/ug002_uva//J1332-0509_X_dfm.log on Thu Mar  5 01:16:43 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1332-0509_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1332-0509_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.966667 visibilities/baseline/integration-bin.
! Found source: J1332-0509
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 25056 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1332-0509_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.048763Jy  sigma=8.820688
! Fit after  self-cal, rms=0.698722Jy  sigma=5.893285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.736 mas, bmaj=3.404 mas, bpa=-18.57 degrees
! Estimated noise=1.00614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.222385 Jy
! Component: 100  -  total flux cleaned = 0.279173 Jy
! Total flux subtracted in 100 components = 0.279173 Jy
! Clean residual min=-0.009342 max=0.024106 Jy/beam
! Clean residual mean=0.000018 rms=0.002362 Jy/beam
! Combined flux in latest and established models = 0.279173 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.279173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081719Jy  sigma=0.665027
! Fit after  self-cal, rms=0.081715Jy  sigma=0.664963
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0256375 Jy
! Component: 100  -  total flux cleaned = 0.0384567 Jy
! Total flux subtracted in 100 components = 0.0384567 Jy
! Clean residual min=-0.008322 max=0.010116 Jy/beam
! Clean residual mean=0.000012 rms=0.001668 Jy/beam
! Combined flux in latest and established models = 0.31763 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 13 components and 0.317629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069513Jy  sigma=0.562707
! Fit after  self-cal, rms=0.069514Jy  sigma=0.562660
! Inverting map 
! Added new window around map position (2.2, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104049 Jy
! Component: 100  -  total flux cleaned = 0.017412 Jy
! Total flux subtracted in 100 components = 0.017412 Jy
! Clean residual min=-0.008126 max=0.008307 Jy/beam
! Clean residual mean=0.000009 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.335041 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 26 components and 0.335041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066872Jy  sigma=0.540176
! Fit after  self-cal, rms=0.066770Jy  sigma=0.539296
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.968 mas, bmaj=3.558 mas, bpa=-17.69 degrees
! Estimated noise=0.536477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106237 Jy
! Component: 100  -  total flux cleaned = 0.0178524 Jy
! Component: 150  -  total flux cleaned = 0.0229498 Jy
! Component: 200  -  total flux cleaned = 0.0251596 Jy
! Total flux subtracted in 200 components = 0.0251596 Jy
! Clean residual min=-0.007884 max=0.008260 Jy/beam
! Clean residual mean=0.000005 rms=0.001783 Jy/beam
! Combined flux in latest and established models = 0.360201 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 57 components and 0.360201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064650Jy  sigma=0.521286
! Fit after  self-cal, rms=0.064563Jy  sigma=0.520507
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.968 x 3.558 at -17.69 degrees (North through East)
! Clean map  min=-0.007367  max=0.29469 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        1.05     
!   LA        1.02     MK        1.00     NL        1.08     OV        0.90     
!   PT        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.98     KP        1.06     
!   LA        1.00     MK        1.00     NL        1.08     OV        0.91     
!   PT        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        1.01     KP        1.06     
!   LA        1.01     MK        1.00     NL        1.10     OV        0.91     
!   PT        0.90     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.00     KP        1.06     
!   LA        1.02     MK        1.00     NL        1.09     OV        0.90     
!   PT        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.00     KP        1.08     
!   LA        1.02     MK        1.00     NL        1.09     OV        0.91     
!   PT        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.99     KP        1.05     
!   LA        1.01     MK        1.02     NL        1.11     OV        0.90     
!   PT        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.01     KP        1.07     
!   LA        1.03     MK        1.01     NL        1.08     OV        0.92     
!   PT        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.99     KP        1.07     
!   LA        1.01     MK        1.02     NL        1.08     OV        0.91     
!   PT        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.01     KP        1.08     
!   LA        1.01     MK        1.00     NL        1.09     OV        0.91     
!   PT        0.91     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.99     KP        1.06     
!   LA        1.02     MK        1.03     NL        1.09     OV        0.91     
!   PT        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        1.06     
!   LA        1.03     MK        1.02     NL        1.09     OV        0.92     
!   PT        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.02     KP        1.05     
!   LA        1.02     MK        1.03     NL        1.10     OV        0.92     
!   PT        0.91     
! 
! 
! Fit before self-cal, rms=0.064563Jy  sigma=0.520507
! Fit after  self-cal, rms=0.058824Jy  sigma=0.474520
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9755 mas, bmaj=3.533 mas, bpa=-17.57 degrees
! Estimated noise=0.534652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000815657 Jy
! Component: 100  -  total flux cleaned = 9.3864e-05 Jy
! Component: 150  -  total flux cleaned = 0.00113886 Jy
! Component: 200  -  total flux cleaned = 0.00181779 Jy
! Total flux subtracted in 200 components = 0.00181779 Jy
! Clean residual min=-0.002939 max=0.003276 Jy/beam
! Clean residual mean=0.000005 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.362019 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.362019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058257Jy  sigma=0.469864
! Fit after  self-cal, rms=0.058259Jy  sigma=0.469676
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058259Jy  sigma=0.469676
! Fit after  self-cal, rms=0.057889Jy  sigma=0.462671
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9751 mas, bmaj=3.544 mas, bpa=-17.46 degrees
! Estimated noise=0.534671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015676 Jy
! Component: 100  -  total flux cleaned = -0.00150934 Jy
! Component: 150  -  total flux cleaned = -0.00117744 Jy
! Component: 200  -  total flux cleaned = -0.000876734 Jy
! Total flux subtracted in 200 components = -0.000876734 Jy
! Clean residual min=-0.002321 max=0.001692 Jy/beam
! Clean residual mean=0.000002 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.361142 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 99 components and 0.361142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057710Jy  sigma=0.461254
! Fit after  self-cal, rms=0.057709Jy  sigma=0.461165
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124866 Jy
! Component: 100  -  total flux cleaned = 0.000173774 Jy
! Component: 150  -  total flux cleaned = 0.000367582 Jy
! Component: 200  -  total flux cleaned = 0.000617203 Jy
! Total flux subtracted in 200 components = 0.000617203 Jy
! Clean residual min=-0.002122 max=0.001721 Jy/beam
! Clean residual mean=0.000002 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.361759 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 111 components and 0.36176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057653Jy  sigma=0.460736
! Fit after  self-cal, rms=0.057652Jy  sigma=0.460724
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057652Jy  sigma=0.460724
! Fit after  self-cal, rms=0.057653Jy  sigma=0.460351
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9747 mas, bmaj=3.543 mas, bpa=-17.45 degrees
! Estimated noise=0.534117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017317 Jy
! Component: 100  -  total flux cleaned = -0.00186639 Jy
! Component: 150  -  total flux cleaned = -0.00172406 Jy
! Component: 200  -  total flux cleaned = -0.00149699 Jy
! Total flux subtracted in 200 components = -0.00149699 Jy
! Clean residual min=-0.001770 max=0.001466 Jy/beam
! Clean residual mean=0.000001 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.360263 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 120 components and 0.360263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057584Jy  sigma=0.459802
! Fit after  self-cal, rms=0.057584Jy  sigma=0.459783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128474 Jy
! Component: 100  -  total flux cleaned = 7.04666e-05 Jy
! Component: 150  -  total flux cleaned = 0.000203479 Jy
! Component: 200  -  total flux cleaned = 0.000278243 Jy
! Total flux subtracted in 200 components = 0.000278243 Jy
! Clean residual min=-0.001673 max=0.001479 Jy/beam
! Clean residual mean=0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.360541 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 134 components and 0.360541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057559Jy  sigma=0.459594
! Fit after  self-cal, rms=0.057559Jy  sigma=0.459590
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057559Jy  sigma=0.459590
! Fit after  self-cal, rms=0.057581Jy  sigma=0.459395
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.218 mas, bmaj=3.996 mas, bpa=-6.809 degrees
! Estimated noise=0.636283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000799301 Jy
! Component: 100  -  total flux cleaned = -0.000646997 Jy
! Component: 150  -  total flux cleaned = -0.000455703 Jy
! Component: 200  -  total flux cleaned = -0.000311212 Jy
! Total flux subtracted in 200 components = -0.000311212 Jy
! Clean residual min=-0.001869 max=0.001695 Jy/beam
! Clean residual mean=-0.000001 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.36023 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 152 components and 0.36023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057563Jy  sigma=0.459257
! Fit after  self-cal, rms=0.057563Jy  sigma=0.459241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.69233e-05 Jy
! Component: 100  -  total flux cleaned = 9.99718e-05 Jy
! Component: 150  -  total flux cleaned = 0.000230304 Jy
! Component: 200  -  total flux cleaned = 0.000334481 Jy
! Total flux subtracted in 200 components = 0.000334481 Jy
! Clean residual min=-0.001790 max=0.001649 Jy/beam
! Clean residual mean=-0.000001 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.360564 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 0.360564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057562Jy  sigma=0.459238
! Fit after  self-cal, rms=0.057562Jy  sigma=0.459234
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9745 mas, bmaj=3.542 mas, bpa=-17.44 degrees
! Estimated noise=0.53375 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9745 x 3.542 at -17.44 degrees (North through East)
! Clean map  min=-0.001899  max=0.29549 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7393 mas, bmaj=3.39 mas, bpa=-18.36 degrees
! Estimated noise=1.01111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.223428 Jy
! Component: 100  -  total flux cleaned = 0.279195 Jy
! Component: 150  -  total flux cleaned = 0.303866 Jy
! Component: 200  -  total flux cleaned = 0.315787 Jy
! Total flux subtracted in 200 components = 0.315787 Jy
! Clean residual min=-0.003665 max=0.005782 Jy/beam
! Clean residual mean=0.000005 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.315787 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.315787 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9745 mas, bmaj=3.542 mas, bpa=-17.44 degrees
! Estimated noise=0.53375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107122 Jy
! Component: 100  -  total flux cleaned = 0.0173754 Jy
! Component: 150  -  total flux cleaned = 0.0223423 Jy
! Component: 200  -  total flux cleaned = 0.0261932 Jy
! Total flux subtracted in 200 components = 0.0261932 Jy
! Clean residual min=-0.002242 max=0.002275 Jy/beam
! Clean residual mean=0.000003 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.34198 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 51 components and 0.34198 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.218 mas, bmaj=3.996 mas, bpa=-6.809 degrees
! Estimated noise=0.636283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00459117 Jy
! Component: 100  -  total flux cleaned = 0.00768214 Jy
! Component: 150  -  total flux cleaned = 0.00985313 Jy
! Component: 200  -  total flux cleaned = 0.0114925 Jy
! Total flux subtracted in 200 components = 0.0114925 Jy
! Clean residual min=-0.002056 max=0.001762 Jy/beam
! Clean residual mean=0.000003 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.353473 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130444 Jy
! Component: 100  -  total flux cleaned = 0.00236468 Jy
! Component: 150  -  total flux cleaned = 0.00324703 Jy
! Component: 200  -  total flux cleaned = 0.00399551 Jy
! Total flux subtracted in 200 components = 0.00399551 Jy
! Clean residual min=-0.001831 max=0.001706 Jy/beam
! Clean residual mean=0.000001 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.357468 Jy
! Adding 104 model components to the UV plane model.
! The established model now contains 146 components and 0.357468 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9745 mas, bmaj=3.542 mas, bpa=-17.44 degrees
! Estimated noise=0.53375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000376259 Jy
! Component: 100  -  total flux cleaned = 0.000678829 Jy
! Component: 150  -  total flux cleaned = 0.00103131 Jy
! Component: 200  -  total flux cleaned = 0.00123024 Jy
! Total flux subtracted in 200 components = 0.00123024 Jy
! Clean residual min=-0.001447 max=0.001346 Jy/beam
! Clean residual mean=0.000001 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.358698 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 167 components and 0.358698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057561Jy  sigma=0.459160
! Fit after  self-cal, rms=0.057547Jy  sigma=0.459073
wmodel J1332-0509_X_map.mod
! Writing 167 model components to file: J1332-0509_X_map.mod
wobs   J1332-0509_X_uvs.fits
! Writing UV FITS file: J1332-0509_X_uvs.fits
wwins  J1332-0509_X_map.win
! wwins: Wrote 3 windows to J1332-0509_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000392146 Jy
! Component: 100  -  total flux cleaned = -0.000658464 Jy
! Component: 150  -  total flux cleaned = -0.000819634 Jy
! Component: 200  -  total flux cleaned = -0.00101777 Jy
! Component: 250  -  total flux cleaned = -0.00118641 Jy
! Component: 300  -  total flux cleaned = -0.00130895 Jy
! Component: 350  -  total flux cleaned = -0.00140748 Jy
! Component: 400  -  total flux cleaned = -0.00148369 Jy
! Component: 450  -  total flux cleaned = -0.00146457 Jy
! Component: 500  -  total flux cleaned = -0.00150098 Jy
! Component: 550  -  total flux cleaned = -0.00150093 Jy
! Component: 600  -  total flux cleaned = -0.00146614 Jy
! Component: 650  -  total flux cleaned = -0.00153514 Jy
! Component: 700  -  total flux cleaned = -0.00156915 Jy
! Component: 750  -  total flux cleaned = -0.00160209 Jy
! Component: 800  -  total flux cleaned = -0.00163401 Jy
! Component: 850  -  total flux cleaned = -0.0015538 Jy
! Component: 900  -  total flux cleaned = -0.00158547 Jy
! Component: 950  -  total flux cleaned = -0.00160098 Jy
! Component: 1000  -  total flux cleaned = -0.00161652 Jy
! Component: 1050  -  total flux cleaned = -0.00158644 Jy
! Component: 1100  -  total flux cleaned = -0.00166096 Jy
! Component: 1150  -  total flux cleaned = -0.00167568 Jy
! Component: 1200  -  total flux cleaned = -0.00166102 Jy
! Component: 1250  -  total flux cleaned = -0.00167549 Jy
! Component: 1300  -  total flux cleaned = -0.00166125 Jy
! Component: 1350  -  total flux cleaned = -0.00170344 Jy
! Component: 1400  -  total flux cleaned = -0.00167573 Jy
! Component: 1450  -  total flux cleaned = -0.00166217 Jy
! Component: 1500  -  total flux cleaned = -0.00164903 Jy
! Component: 1550  -  total flux cleaned = -0.00166234 Jy
! Component: 1600  -  total flux cleaned = -0.00162288 Jy
! Component: 1650  -  total flux cleaned = -0.00163607 Jy
! Component: 1700  -  total flux cleaned = -0.00159703 Jy
! Component: 1750  -  total flux cleaned = -0.00155846 Jy
! Component: 1800  -  total flux cleaned = -0.00150798 Jy
! Component: 1850  -  total flux cleaned = -0.00150787 Jy
! Component: 1900  -  total flux cleaned = -0.00147077 Jy
! Component: 1950  -  total flux cleaned = -0.00144616 Jy
! Component: 2000  -  total flux cleaned = -0.00142184 Jy
! Component: 2050  -  total flux cleaned = -0.00142181 Jy
! Component: 2100  -  total flux cleaned = -0.00138601 Jy
! Component: 2150  -  total flux cleaned = -0.00135047 Jy
! Component: 2200  -  total flux cleaned = -0.00132727 Jy
! Component: 2250  -  total flux cleaned = -0.00129247 Jy
! Component: 2300  -  total flux cleaned = -0.00126959 Jy
! Component: 2350  -  total flux cleaned = -0.00125827 Jy
! Component: 2400  -  total flux cleaned = -0.00125819 Jy
! Component: 2450  -  total flux cleaned = -0.00125824 Jy
! Component: 2500  -  total flux cleaned = -0.00122507 Jy
! Component: 2550  -  total flux cleaned = -0.00121418 Jy
! Component: 2600  -  total flux cleaned = -0.00119243 Jy
! Component: 2650  -  total flux cleaned = -0.00121393 Jy
! Component: 2700  -  total flux cleaned = -0.00114963 Jy
! Component: 2750  -  total flux cleaned = -0.00112833 Jy
! Component: 2800  -  total flux cleaned = -0.00114931 Jy
! Component: 2850  -  total flux cleaned = -0.00106571 Jy
! Component: 2900  -  total flux cleaned = -0.00107615 Jy
! Component: 2950  -  total flux cleaned = -0.00107609 Jy
! Component: 3000  -  total flux cleaned = -0.00105558 Jy
! Component: 3050  -  total flux cleaned = -0.00102505 Jy
! Component: 3100  -  total flux cleaned = -0.00101496 Jy
! Component: 3150  -  total flux cleaned = -0.000985002 Jy
! Component: 3200  -  total flux cleaned = -0.000955158 Jy
! Component: 3250  -  total flux cleaned = -0.000935522 Jy
! Component: 3300  -  total flux cleaned = -0.000945245 Jy
! Component: 3350  -  total flux cleaned = -0.000916129 Jy
! Component: 3400  -  total flux cleaned = -0.000877807 Jy
! Component: 3450  -  total flux cleaned = -0.000906397 Jy
! Component: 3500  -  total flux cleaned = -0.000849524 Jy
! Component: 3550  -  total flux cleaned = -0.000812024 Jy
! Component: 3600  -  total flux cleaned = -0.000783968 Jy
! Component: 3650  -  total flux cleaned = -0.000756114 Jy
! Component: 3700  -  total flux cleaned = -0.000737638 Jy
! Component: 3750  -  total flux cleaned = -0.00072842 Jy
! Component: 3800  -  total flux cleaned = -0.000673869 Jy
! Component: 3850  -  total flux cleaned = -0.000673932 Jy
! Component: 3900  -  total flux cleaned = -0.000647031 Jy
! Component: 3950  -  total flux cleaned = -0.000638103 Jy
! Component: 4000  -  total flux cleaned = -0.000620461 Jy
! Component: 4050  -  total flux cleaned = -0.000567807 Jy
! Total flux subtracted in 4096 components = -0.000567853 Jy
! Clean residual min=-0.000471 max=0.000540 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.35813 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 460 components and 0.35813 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1332-0509_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9745 x 3.542 at -17.44 degrees (North through East)
! Clean map  min=-0.00092787  max=0.29682 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1332-0509_X_map.fits
wmodel /image_prod/ug002_uva//J1332-0509_X_map.mod
! Writing 460 model components to file: /image_prod/ug002_uva//J1332-0509_X_map.mod
wobs   /image_prod/ug002_uva//J1332-0509_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1332-0509_X_uvs.fits
wwins  /image_prod/ug002_uva//J1332-0509_X_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1332-0509_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.296821 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000163967 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.165723 0.165723 0.331446 0.662893 1.32579 2.65157 5.30314 10.6063 21.2126 42.4251 84.8503
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.296 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1810.25 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1332-0509_X_dfm.log closed on Thu Mar  5 01:16:47 2020