! Started logfile: /image_prod/ug002_uva//J1332+0719_S_dfm.log on Thu Mar  5 01:16:17 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1332+0719_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1332+0719_S_uva.fits
! AN table 1: 50 integrations on 1 of 1 possible baselines.
! AN table 2: 150 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.741935 visibilities/baseline/integration-bin.
! Found source: J1332+0719
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3450 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1332+0719_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 100 telescope corrections were flagged in sub-array 1.
!  A total of 100 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 100 telescope corrections were flagged in sub-array 1.
!  A total of 100 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 100 telescope corrections were flagged in sub-array 1.
!  A total of 100 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.002339Jy  sigma=10.399282
! Fit after  self-cal, rms=0.967423Jy  sigma=10.135092
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=19.99 mas, bmaj=29.08 mas, bpa=30.49 degrees
! Estimated noise=1.45385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0262442 Jy
! Component: 100  -  total flux cleaned = 0.0308268 Jy
! Total flux subtracted in 100 components = 0.0308268 Jy
! Clean residual min=-0.002163 max=0.002092 Jy/beam
! Clean residual mean=-0.000011 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.0308268 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0308268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.038060Jy  sigma=0.391181
! Fit after  self-cal, rms=0.036698Jy  sigma=0.376759
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.25 mas, bmaj=30.98 mas, bpa=30.75 degrees
! Estimated noise=1.1818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165298 Jy
! Component: 100  -  total flux cleaned = 0.00230816 Jy
! Component: 150  -  total flux cleaned = 0.00254903 Jy
! Component: 200  -  total flux cleaned = 0.00267475 Jy
! Total flux subtracted in 200 components = 0.00267475 Jy
! Clean residual min=-0.001264 max=0.001273 Jy/beam
! Clean residual mean=-0.000003 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0335016 Jy
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 84 components and 0.0335016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036434Jy  sigma=0.373765
! Fit after  self-cal, rms=0.036395Jy  sigma=0.373289
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 20.25 x 30.98 at 30.75 degrees (North through East)
! Clean map  min=-0.0016564  max=0.034891 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     KP        1.05     LA        0.99     OV        1.10     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.93     KP        0.96     LA        1.03     OV        0.92     
!   PT        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.01     LA        0.97     OV        0.94     
!   PT        1.04     
! 
! 
! Fit before self-cal, rms=0.036395Jy  sigma=0.373289
! Fit after  self-cal, rms=0.036075Jy  sigma=0.372670
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=19.98 mas, bmaj=31.03 mas, bpa=31.26 degrees
! Estimated noise=1.16965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000753677 Jy
! Component: 100  -  total flux cleaned = 0.00115731 Jy
! Component: 150  -  total flux cleaned = 0.00139881 Jy
! Component: 200  -  total flux cleaned = 0.0015348 Jy
! Total flux subtracted in 200 components = 0.0015348 Jy
! Clean residual min=-0.001066 max=0.000953 Jy/beam
! Clean residual mean=-0.000002 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.0350364 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.0350364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036056Jy  sigma=0.372489
! Fit after  self-cal, rms=0.036085Jy  sigma=0.372310
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036085Jy  sigma=0.372310
! Fit after  self-cal, rms=0.036446Jy  sigma=0.371586
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.91 mas, bmaj=31.02 mas, bpa=31.6 degrees
! Estimated noise=1.17179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000573947 Jy
! Component: 100  -  total flux cleaned = 0.000849741 Jy
! Component: 150  -  total flux cleaned = 0.00097338 Jy
! Component: 200  -  total flux cleaned = 0.00104194 Jy
! Total flux subtracted in 200 components = 0.00104194 Jy
! Clean residual min=-0.000866 max=0.000814 Jy/beam
! Clean residual mean=0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.0360783 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 0.0360783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036435Jy  sigma=0.371488
! Fit after  self-cal, rms=0.036468Jy  sigma=0.371381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275428 Jy
! Component: 100  -  total flux cleaned = 0.000298192 Jy
! Component: 150  -  total flux cleaned = 0.000304591 Jy
! Component: 200  -  total flux cleaned = 0.000310907 Jy
! Total flux subtracted in 200 components = 0.000310907 Jy
! Clean residual min=-0.000874 max=0.000858 Jy/beam
! Clean residual mean=0.000002 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0363892 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 146 components and 0.0363892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036464Jy  sigma=0.371342
! Fit after  self-cal, rms=0.036447Jy  sigma=0.371278
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036447Jy  sigma=0.371278
! Fit after  self-cal, rms=0.036546Jy  sigma=0.370997
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.92 mas, bmaj=30.96 mas, bpa=31.63 degrees
! Estimated noise=1.16728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000380366 Jy
! Component: 100  -  total flux cleaned = 0.000427691 Jy
! Component: 150  -  total flux cleaned = 0.000427566 Jy
! Component: 200  -  total flux cleaned = 0.000456674 Jy
! Total flux subtracted in 200 components = 0.000456674 Jy
! Clean residual min=-0.000740 max=0.000711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0368459 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 175 components and 0.0368459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036541Jy  sigma=0.370947
! Fit after  self-cal, rms=0.036557Jy  sigma=0.370850
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139673 Jy
! Component: 100  -  total flux cleaned = 0.000147717 Jy
! Component: 150  -  total flux cleaned = 0.000141035 Jy
! Component: 200  -  total flux cleaned = 0.000114759 Jy
! Total flux subtracted in 200 components = 0.000114759 Jy
! Clean residual min=-0.000795 max=0.000722 Jy/beam
! Clean residual mean=0.000001 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0369607 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 199 components and 0.0369607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036555Jy  sigma=0.370819
! Fit after  self-cal, rms=0.036552Jy  sigma=0.370808
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036552Jy  sigma=0.370808
! Fit after  self-cal, rms=0.036530Jy  sigma=0.370787
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.33 mas, bmaj=30.88 mas, bpa=31.24 degrees
! Estimated noise=1.16518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194758 Jy
! Component: 100  -  total flux cleaned = 0.000181581 Jy
! Component: 150  -  total flux cleaned = 0.000157282 Jy
! Component: 200  -  total flux cleaned = 0.000136059 Jy
! Total flux subtracted in 200 components = 0.000136059 Jy
! Clean residual min=-0.000766 max=0.000680 Jy/beam
! Clean residual mean=-0.000000 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0370967 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 221 components and 0.0370967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036527Jy  sigma=0.370764
! Fit after  self-cal, rms=0.036534Jy  sigma=0.370752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.89082e-05 Jy
! Component: 100  -  total flux cleaned = 8.22663e-05 Jy
! Component: 150  -  total flux cleaned = 7.69562e-05 Jy
! Component: 200  -  total flux cleaned = 6.74803e-05 Jy
! Total flux subtracted in 200 components = 6.74803e-05 Jy
! Clean residual min=-0.000755 max=0.000692 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0371642 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 232 components and 0.0371642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036532Jy  sigma=0.370732
! Fit after  self-cal, rms=0.036530Jy  sigma=0.370724
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=19.92 mas, bmaj=30.91 mas, bpa=31.6 degrees
! Estimated noise=1.16342 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 19.92 x 30.91 at 31.6 degrees (North through East)
! Clean map  min=-0.0014963  max=0.03482 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.77 mas, bmaj=28.95 mas, bpa=31.59 degrees
! Estimated noise=1.39968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0263235 Jy
! Component: 100  -  total flux cleaned = 0.0312443 Jy
! Component: 150  -  total flux cleaned = 0.0336582 Jy
! Component: 200  -  total flux cleaned = 0.035186 Jy
! Total flux subtracted in 200 components = 0.035186 Jy
! Clean residual min=-0.001308 max=0.001001 Jy/beam
! Clean residual mean=0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.035186 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.035186 Jy
! Inverting map and beam 
! Estimated beam: bmin=19.92 mas, bmaj=30.91 mas, bpa=31.6 degrees
! Estimated noise=1.16342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108199 Jy
! Component: 100  -  total flux cleaned = 0.00145244 Jy
! Component: 150  -  total flux cleaned = 0.0016554 Jy
! Component: 200  -  total flux cleaned = 0.00173581 Jy
! Total flux subtracted in 200 components = 0.00173581 Jy
! Clean residual min=-0.000964 max=0.000820 Jy/beam
! Clean residual mean=0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0369218 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 81 components and 0.0369218 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.33 mas, bmaj=30.88 mas, bpa=31.24 degrees
! Estimated noise=1.16518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.14093e-05 Jy
! Component: 100  -  total flux cleaned = 6.18574e-05 Jy
! Component: 150  -  total flux cleaned = 8.02933e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105897 Jy
! Total flux subtracted in 200 components = 0.000105897 Jy
! Clean residual min=-0.000908 max=0.000783 Jy/beam
! Clean residual mean=0.000000 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0370277 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.0926e-06 Jy
! Component: 100  -  total flux cleaned = 3.12149e-05 Jy
! Component: 150  -  total flux cleaned = 4.60202e-05 Jy
! Component: 200  -  total flux cleaned = 3.21569e-05 Jy
! Total flux subtracted in 200 components = 3.21569e-05 Jy
! Clean residual min=-0.000870 max=0.000738 Jy/beam
! Clean residual mean=0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0370599 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 124 components and 0.0370599 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=19.92 mas, bmaj=30.91 mas, bpa=31.6 degrees
! Estimated noise=1.16342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.64145e-06 Jy
! Component: 100  -  total flux cleaned = -1.97531e-05 Jy
! Component: 150  -  total flux cleaned = -3.25634e-05 Jy
! Component: 200  -  total flux cleaned = -5.1003e-05 Jy
! Total flux subtracted in 200 components = -5.1003e-05 Jy
! Clean residual min=-0.000843 max=0.000703 Jy/beam
! Clean residual mean=0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0370089 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 131 components and 0.0370089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.036533Jy  sigma=0.370746
! Fit after  self-cal, rms=0.036531Jy  sigma=0.370735
wmodel J1332+0719_S_map.mod
! Writing 131 model components to file: J1332+0719_S_map.mod
wobs   J1332+0719_S_uvs.fits
! Writing UV FITS file: J1332+0719_S_uvs.fits
wwins  J1332+0719_S_map.win
! wwins: Wrote 1 windows to J1332+0719_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205839 Jy
! Component: 100  -  total flux cleaned = -6.78935e-05 Jy
! Component: 150  -  total flux cleaned = 9.08405e-05 Jy
! Component: 200  -  total flux cleaned = 0.000266323 Jy
! Component: 250  -  total flux cleaned = 0.000419012 Jy
! Component: 300  -  total flux cleaned = 0.000517824 Jy
! Component: 350  -  total flux cleaned = 0.000617482 Jy
! Component: 400  -  total flux cleaned = 0.000711337 Jy
! Component: 450  -  total flux cleaned = 0.000764571 Jy
! Component: 500  -  total flux cleaned = 0.000798236 Jy
! Component: 550  -  total flux cleaned = 0.000846476 Jy
! Component: 600  -  total flux cleaned = 0.000892671 Jy
! Component: 650  -  total flux cleaned = 0.000937134 Jy
! Component: 700  -  total flux cleaned = 0.00098949 Jy
! Component: 750  -  total flux cleaned = 0.00103086 Jy
! Component: 800  -  total flux cleaned = 0.00107094 Jy
! Component: 850  -  total flux cleaned = 0.0011098 Jy
! Component: 900  -  total flux cleaned = 0.00113909 Jy
! Component: 950  -  total flux cleaned = 0.00115958 Jy
! Component: 1000  -  total flux cleaned = 0.00118756 Jy
! Component: 1050  -  total flux cleaned = 0.00121105 Jy
! Component: 1100  -  total flux cleaned = 0.00121871 Jy
! Component: 1150  -  total flux cleaned = 0.00122992 Jy
! Component: 1200  -  total flux cleaned = 0.00124465 Jy
! Component: 1250  -  total flux cleaned = 0.00126279 Jy
! Component: 1300  -  total flux cleaned = 0.0012771 Jy
! Component: 1350  -  total flux cleaned = 0.00129126 Jy
! Component: 1400  -  total flux cleaned = 0.00130871 Jy
! Component: 1450  -  total flux cleaned = 0.00132255 Jy
! Component: 1500  -  total flux cleaned = 0.00133284 Jy
! Component: 1550  -  total flux cleaned = 0.00133961 Jy
! Component: 1600  -  total flux cleaned = 0.00133289 Jy
! Component: 1650  -  total flux cleaned = 0.00132618 Jy
! Component: 1700  -  total flux cleaned = 0.00131614 Jy
! Component: 1750  -  total flux cleaned = 0.00130611 Jy
! Component: 1800  -  total flux cleaned = 0.00129277 Jy
! Component: 1850  -  total flux cleaned = 0.00128612 Jy
! Component: 1900  -  total flux cleaned = 0.00127619 Jy
! Component: 1950  -  total flux cleaned = 0.00126621 Jy
! Component: 2000  -  total flux cleaned = 0.00125291 Jy
! Component: 2050  -  total flux cleaned = 0.00124297 Jy
! Component: 2100  -  total flux cleaned = 0.00122972 Jy
! Component: 2150  -  total flux cleaned = 0.0012231 Jy
! Component: 2200  -  total flux cleaned = 0.00120981 Jy
! Component: 2250  -  total flux cleaned = 0.00119647 Jy
! Component: 2300  -  total flux cleaned = 0.00118311 Jy
! Component: 2350  -  total flux cleaned = 0.00116636 Jy
! Component: 2400  -  total flux cleaned = 0.00115631 Jy
! Component: 2450  -  total flux cleaned = 0.00114285 Jy
! Component: 2500  -  total flux cleaned = 0.00112935 Jy
! Component: 2550  -  total flux cleaned = 0.00112598 Jy
! Component: 2600  -  total flux cleaned = 0.00111233 Jy
! Component: 2650  -  total flux cleaned = 0.00110199 Jy
! Component: 2700  -  total flux cleaned = 0.00108814 Jy
! Component: 2750  -  total flux cleaned = 0.00107412 Jy
! Component: 2800  -  total flux cleaned = 0.00106698 Jy
! Component: 2850  -  total flux cleaned = 0.00105266 Jy
! Component: 2900  -  total flux cleaned = 0.00104543 Jy
! Component: 2950  -  total flux cleaned = 0.00104179 Jy
! Component: 3000  -  total flux cleaned = 0.00103435 Jy
! Component: 3050  -  total flux cleaned = 0.00102308 Jy
! Component: 3100  -  total flux cleaned = 0.00101542 Jy
! Component: 3150  -  total flux cleaned = 0.00101161 Jy
! Component: 3200  -  total flux cleaned = 0.0010038 Jy
! Component: 3250  -  total flux cleaned = 0.000979953 Jy
! Component: 3300  -  total flux cleaned = 0.000947509 Jy
! Component: 3350  -  total flux cleaned = 0.00091856 Jy
! Component: 3400  -  total flux cleaned = 0.000893273 Jy
! Component: 3450  -  total flux cleaned = 0.00086327 Jy
! Component: 3500  -  total flux cleaned = 0.000828353 Jy
! Component: 3550  -  total flux cleaned = 0.000801633 Jy
! Component: 3600  -  total flux cleaned = 0.000765418 Jy
! Component: 3650  -  total flux cleaned = 0.000728416 Jy
! Component: 3700  -  total flux cleaned = 0.000695393 Jy
! Component: 3750  -  total flux cleaned = 0.000661783 Jy
! Component: 3800  -  total flux cleaned = 0.000622639 Jy
! Component: 3850  -  total flux cleaned = 0.000587731 Jy
! Component: 3900  -  total flux cleaned = 0.000552236 Jy
! Component: 3950  -  total flux cleaned = 0.000516044 Jy
! Component: 4000  -  total flux cleaned = 0.000468509 Jy
! Component: 4050  -  total flux cleaned = 0.000430698 Jy
! Total flux subtracted in 4096 components = 0.000392175 Jy
! Clean residual min=-0.000296 max=0.000338 Jy/beam
! Clean residual mean=-0.000001 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0374011 Jy
keep
! Adding 392 model components to the UV plane model.
! The established model now contains 523 components and 0.0374011 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1332+0719_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 19.92 x 30.91 at 31.6 degrees (North through East)
! Clean map  min=-0.001448  max=0.034631 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1332+0719_S_map.fits
wmodel /image_prod/ug002_uva//J1332+0719_S_map.mod
! Writing 523 model components to file: /image_prod/ug002_uva//J1332+0719_S_map.mod
wobs   /image_prod/ug002_uva//J1332+0719_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1332+0719_S_uvs.fits
wwins  /image_prod/ug002_uva//J1332+0719_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1332+0719_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0346309 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000111111 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.962525 0.962525 1.92505 3.8501 7.7002 15.4004 30.8008 61.6016
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.034 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  311.68 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1332+0719_S_dfm.log closed on Thu Mar  5 01:16:21 2020