! Started logfile: /image_prod/ug002_uva//J1323-4452_S_dfm.log on Thu Mar 5 01:12:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1323-4452_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1323-4452_S_uva.fits ! AN table 1: 74 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.854569 visibilities/baseline/integration-bin. ! Found source: J1323-4452 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 3984 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1323-4452_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.221227Jy sigma=5.913779 ! Fit after self-cal, rms=0.735966Jy sigma=3.736787 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=8.003 mas, bpa=3.109 degrees ! Estimated noise=3.30664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.289172 Jy ! Component: 100 - total flux cleaned = 0.469522 Jy ! Total flux subtracted in 100 components = 0.469522 Jy ! Clean residual min=-0.069232 max=0.094618 Jy/beam ! Clean residual mean=-0.003082 rms=0.025070 Jy/beam ! Combined flux in latest and established models = 0.469522 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.469522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.396675Jy sigma=1.651614 ! Fit after self-cal, rms=0.396031Jy sigma=1.648268 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=9.616 mas, bpa=3.361 degrees ! Estimated noise=2.26619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175933 Jy ! Component: 100 - total flux cleaned = 0.271397 Jy ! Component: 150 - total flux cleaned = 0.326464 Jy ! Component: 200 - total flux cleaned = 0.362795 Jy ! Total flux subtracted in 200 components = 0.362795 Jy ! Clean residual min=-0.046906 max=0.046762 Jy/beam ! Clean residual mean=-0.002327 rms=0.021492 Jy/beam ! Combined flux in latest and established models = 0.832318 Jy ! Performing phase self-cal ! Adding 150 model components to the UV plane model. ! The established model now contains 188 components and 0.832318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.245090Jy sigma=1.006235 ! Fit after self-cal, rms=0.242196Jy sigma=0.983359 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.996 x 9.616 at 3.361 degrees (North through East) ! Clean map min=-0.06671 max=0.34023 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.84 KP 1.05 LA 0.74 MK 1.60 ! OV 0.99 PT 1.13 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.87 KP 1.05 LA 0.76 MK 1.11 ! OV 1.06 PT 1.07 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.86 KP 1.05 LA 0.75 MK 0.98 ! OV 1.03 PT 1.12 SC 1.14 ! ! ! Fit before self-cal, rms=0.242196Jy sigma=0.983359 ! Fit after self-cal, rms=0.162405Jy sigma=0.784885 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=10.05 mas, bpa=4.142 degrees ! Estimated noise=2.1638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427127 Jy ! Component: 100 - total flux cleaned = 0.0465349 Jy ! Component: 150 - total flux cleaned = 0.0451267 Jy ! Component: 200 - total flux cleaned = 0.042593 Jy ! Total flux subtracted in 200 components = 0.042593 Jy ! Clean residual min=-0.019744 max=0.019749 Jy/beam ! Clean residual mean=-0.000808 rms=0.009305 Jy/beam ! Combined flux in latest and established models = 0.874911 Jy ! Performing phase self-cal ! Adding 154 model components to the UV plane model. ! The established model now contains 342 components and 0.874911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.125642Jy sigma=0.585083 ! Fit after self-cal, rms=0.124214Jy sigma=0.579950 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.124214Jy sigma=0.579950 ! Fit after self-cal, rms=0.117291Jy sigma=0.571253 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=10.05 mas, bpa=4.514 degrees ! Estimated noise=2.08421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017992 Jy ! Component: 100 - total flux cleaned = 0.0209299 Jy ! Component: 150 - total flux cleaned = 0.0193008 Jy ! Component: 200 - total flux cleaned = 0.0185275 Jy ! Total flux subtracted in 200 components = 0.0185275 Jy ! Clean residual min=-0.011946 max=0.011827 Jy/beam ! Clean residual mean=-0.000525 rms=0.005939 Jy/beam ! Combined flux in latest and established models = 0.893438 Jy selfcal ! Performing phase self-cal ! Adding 144 model components to the UV plane model. ! The established model now contains 474 components and 0.893438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102523Jy sigma=0.495270 ! Fit after self-cal, rms=0.101952Jy sigma=0.493140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378876 Jy ! Component: 100 - total flux cleaned = 0.000564651 Jy ! Component: 150 - total flux cleaned = -0.00292819 Jy ! Component: 200 - total flux cleaned = -0.0061566 Jy ! Total flux subtracted in 200 components = -0.0061566 Jy ! Clean residual min=-0.008526 max=0.008520 Jy/beam ! Clean residual mean=-0.000444 rms=0.004480 Jy/beam ! Combined flux in latest and established models = 0.887282 Jy ! Performing phase self-cal ! Adding 121 model components to the UV plane model. ! The established model now contains 578 components and 0.887281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094301Jy sigma=0.457905 ! Fit after self-cal, rms=0.094045Jy sigma=0.457028 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094045Jy sigma=0.457028 ! Fit after self-cal, rms=0.089692Jy sigma=0.449020 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=10 mas, bpa=4.989 degrees ! Estimated noise=2.05319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593214 Jy ! Component: 100 - total flux cleaned = 0.00911869 Jy ! Component: 150 - total flux cleaned = 0.0124247 Jy ! Component: 200 - total flux cleaned = 0.0135839 Jy ! Total flux subtracted in 200 components = 0.0135839 Jy ! Clean residual min=-0.006143 max=0.006135 Jy/beam ! Clean residual mean=-0.000232 rms=0.003084 Jy/beam ! Combined flux in latest and established models = 0.900865 Jy selfcal ! Performing phase self-cal ! Adding 105 model components to the UV plane model. ! The established model now contains 675 components and 0.900865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085499Jy sigma=0.429314 ! Fit after self-cal, rms=0.085230Jy sigma=0.428917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218548 Jy ! Component: 100 - total flux cleaned = 0.00349795 Jy ! Component: 150 - total flux cleaned = 0.00411823 Jy ! Component: 200 - total flux cleaned = 0.0049852 Jy ! Total flux subtracted in 200 components = 0.0049852 Jy ! Clean residual min=-0.004677 max=0.004670 Jy/beam ! Clean residual mean=-0.000210 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 0.90585 Jy ! Performing phase self-cal ! Adding 104 model components to the UV plane model. ! The established model now contains 759 components and 0.90585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082848Jy sigma=0.418003 ! Fit after self-cal, rms=0.082719Jy sigma=0.417766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082719Jy sigma=0.417766 ! Fit after self-cal, rms=0.082065Jy sigma=0.416814 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=36.52 mas, bpa=2.714 degrees ! Estimated noise=2.62844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349044 Jy ! Component: 100 - total flux cleaned = 0.00639671 Jy ! Component: 150 - total flux cleaned = 0.00982006 Jy ! Component: 200 - total flux cleaned = 0.0123094 Jy ! Total flux subtracted in 200 components = 0.0123094 Jy ! Clean residual min=-0.005688 max=0.005723 Jy/beam ! Clean residual mean=-0.000189 rms=0.002956 Jy/beam ! Combined flux in latest and established models = 0.91816 Jy selfcal ! Performing phase self-cal ! Adding 106 model components to the UV plane model. ! The established model now contains 847 components and 0.91816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080087Jy sigma=0.407131 ! Fit after self-cal, rms=0.079935Jy sigma=0.406697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144742 Jy ! Component: 100 - total flux cleaned = 0.00227564 Jy ! Component: 150 - total flux cleaned = 0.00176332 Jy ! Component: 200 - total flux cleaned = 0.000855579 Jy ! Total flux subtracted in 200 components = 0.000855579 Jy ! Clean residual min=-0.003593 max=0.003598 Jy/beam ! Clean residual mean=-0.000168 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 0.919015 Jy ! Performing phase self-cal ! Adding 124 model components to the UV plane model. ! The established model now contains 968 components and 0.919016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078964Jy sigma=0.401891 ! Fit after self-cal, rms=0.078906Jy sigma=0.401745 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=10.02 mas, bpa=5.144 degrees ! Estimated noise=2.05512 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.125 x 10.02 at 5.144 degrees (North through East) ! Clean map min=-0.021102 max=0.29802 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.431 mas, bmaj=8.166 mas, bpa=4.634 degrees ! Estimated noise=3.09523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.265677 Jy ! Component: 100 - total flux cleaned = 0.425506 Jy ! Component: 150 - total flux cleaned = 0.527975 Jy ! Component: 200 - total flux cleaned = 0.602743 Jy ! Total flux subtracted in 200 components = 0.602743 Jy ! Clean residual min=-0.042916 max=0.043322 Jy/beam ! Clean residual mean=-0.001788 rms=0.015309 Jy/beam ! Combined flux in latest and established models = 0.602743 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.602743 Jy ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=10.02 mas, bpa=5.144 degrees ! Estimated noise=2.05512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727721 Jy ! Component: 100 - total flux cleaned = 0.107006 Jy ! Component: 150 - total flux cleaned = 0.130913 Jy ! Component: 200 - total flux cleaned = 0.15132 Jy ! Total flux subtracted in 200 components = 0.15132 Jy ! Clean residual min=-0.029263 max=0.029055 Jy/beam ! Clean residual mean=-0.001233 rms=0.013397 Jy/beam ! Combined flux in latest and established models = 0.754063 Jy ! Adding 137 model components to the UV plane model. ! The established model now contains 208 components and 0.754063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=36.52 mas, bpa=2.714 degrees ! Estimated noise=2.62844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340907 Jy ! Component: 100 - total flux cleaned = 0.038754 Jy ! Component: 150 - total flux cleaned = 0.0484372 Jy ! Component: 200 - total flux cleaned = 0.0564733 Jy ! Total flux subtracted in 200 components = 0.0564733 Jy ! Clean residual min=-0.024566 max=0.024581 Jy/beam ! Clean residual mean=-0.001391 rms=0.013236 Jy/beam ! Combined flux in latest and established models = 0.810536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122821 Jy ! Component: 100 - total flux cleaned = 0.0182291 Jy ! Component: 150 - total flux cleaned = 0.0151575 Jy ! Component: 200 - total flux cleaned = 0.0115032 Jy ! Total flux subtracted in 200 components = 0.0115032 Jy ! Clean residual min=-0.014514 max=0.014509 Jy/beam ! Clean residual mean=-0.001006 rms=0.008330 Jy/beam ! Combined flux in latest and established models = 0.82204 Jy ! Adding 258 model components to the UV plane model. ! The established model now contains 464 components and 0.822039 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=10.02 mas, bpa=5.144 degrees ! Estimated noise=2.05512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182562 Jy ! Component: 100 - total flux cleaned = -0.00184923 Jy ! Component: 150 - total flux cleaned = 0.000175168 Jy ! Component: 200 - total flux cleaned = 0.00198417 Jy ! Total flux subtracted in 200 components = 0.00198417 Jy ! Clean residual min=-0.007378 max=0.007368 Jy/beam ! Clean residual mean=-0.000446 rms=0.003597 Jy/beam ! Combined flux in latest and established models = 0.824023 Jy selfcal ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 555 components and 0.824023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086897Jy sigma=0.439175 ! Fit after self-cal, rms=0.086473Jy sigma=0.436821 wmodel J1323-4452_S_map.mod ! Writing 555 model components to file: J1323-4452_S_map.mod wobs J1323-4452_S_uvs.fits ! Writing UV FITS file: J1323-4452_S_uvs.fits wwins J1323-4452_S_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /image_prod/ug002_uva//J1323-4452_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.125 x 10.02 at 5.144 degrees (North through East) ! Clean map min=-0.025803 max=0.25859 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1323-4452_S_map.fits wmodel /image_prod/ug002_uva//J1323-4452_S_map.mod ! Writing 555 model components to file: /image_prod/ug002_uva//J1323-4452_S_map.mod wobs /image_prod/ug002_uva//J1323-4452_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1323-4452_S_uvs.fits wwins /image_prod/ug002_uva//J1323-4452_S_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ! float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.258587 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00353336 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.09924 4.09924 8.19848 16.397 32.7939 65.5878 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0106 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.258 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 73.184 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1323-4452_S_dfm.log closed on Thu Mar 5 01:12:38 2020