! Started logfile: /image_prod/ug002_uva//J1321-2636_S_dfm.log on Thu Mar  5 01:10:44 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1321-2636_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1321-2636_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.981481 visibilities/baseline/integration-bin.
! Found source: J1321-2636
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7950 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1321-2636_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.054530Jy  sigma=6.578905
! Fit after  self-cal, rms=0.734734Jy  sigma=4.391975
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.592 mas, bmaj=6.698 mas, bpa=-5.271 degrees
! Estimated noise=2.08872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.211385 Jy
! Component: 100  -  total flux cleaned = 0.273571 Jy
! Total flux subtracted in 100 components = 0.273571 Jy
! Clean residual min=-0.014220 max=0.032835 Jy/beam
! Clean residual mean=-0.000085 rms=0.004412 Jy/beam
! Combined flux in latest and established models = 0.273571 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.273571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112888Jy  sigma=0.660013
! Fit after  self-cal, rms=0.112891Jy  sigma=0.659800
! Inverting map 
! Added new window around map position (3, -9.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327395 Jy
! Component: 100  -  total flux cleaned = 0.0529844 Jy
! Total flux subtracted in 100 components = 0.0529844 Jy
! Clean residual min=-0.011641 max=0.022943 Jy/beam
! Clean residual mean=-0.000052 rms=0.003115 Jy/beam
! Combined flux in latest and established models = 0.326555 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.326555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102349Jy  sigma=0.561233
! Fit after  self-cal, rms=0.102101Jy  sigma=0.557982
! Inverting map 
! Added new window around map position (-3.5, 10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189055 Jy
! Component: 100  -  total flux cleaned = 0.0310454 Jy
! Total flux subtracted in 100 components = 0.0310454 Jy
! Clean residual min=-0.011335 max=0.010815 Jy/beam
! Clean residual mean=-0.000032 rms=0.002587 Jy/beam
! Combined flux in latest and established models = 0.357601 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.357601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097733Jy  sigma=0.524410
! Fit after  self-cal, rms=0.097694Jy  sigma=0.524240
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=8.02 mas, bpa=-4.206 degrees
! Estimated noise=1.31821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120815 Jy
! Component: 100  -  total flux cleaned = 0.0191468 Jy
! Component: 150  -  total flux cleaned = 0.021079 Jy
! Component: 200  -  total flux cleaned = 0.0225574 Jy
! Total flux subtracted in 200 components = 0.0225574 Jy
! Clean residual min=-0.008944 max=0.010907 Jy/beam
! Clean residual mean=-0.000032 rms=0.002579 Jy/beam
! Combined flux in latest and established models = 0.380158 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 85 components and 0.380158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095616Jy  sigma=0.513260
! Fit after  self-cal, rms=0.095553Jy  sigma=0.512943
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.181 x 8.02 at -4.206 degrees (North through East)
! Clean map  min=-0.0084261  max=0.25687 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.96     HN        1.09     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.02     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.95     HN        1.11     KP        1.01     
!   LA        1.03     MK        0.99     NL        1.13     OV        0.92     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.09     KP        0.99     
!   LA        1.02     MK        0.99     NL        0.85     OV        0.97     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.095553Jy  sigma=0.512943
! Fit after  self-cal, rms=0.099313Jy  sigma=0.487140
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=8.056 mas, bpa=-4.486 degrees
! Estimated noise=1.33402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00206456 Jy
! Component: 100  -  total flux cleaned = -0.00173683 Jy
! Component: 150  -  total flux cleaned = -0.00191611 Jy
! Component: 200  -  total flux cleaned = -0.00207686 Jy
! Total flux subtracted in 200 components = -0.00207686 Jy
! Clean residual min=-0.008426 max=0.008448 Jy/beam
! Clean residual mean=-0.000050 rms=0.002286 Jy/beam
! Combined flux in latest and established models = 0.378081 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 97 components and 0.378081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098970Jy  sigma=0.485641
! Fit after  self-cal, rms=0.099054Jy  sigma=0.485316
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099054Jy  sigma=0.485316
! Fit after  self-cal, rms=0.124230Jy  sigma=0.451938
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=8.124 mas, bpa=-5.038 degrees
! Estimated noise=1.35124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00268153 Jy
! Component: 100  -  total flux cleaned = -0.00317793 Jy
! Component: 150  -  total flux cleaned = -0.00349703 Jy
! Component: 200  -  total flux cleaned = -0.00378437 Jy
! Total flux subtracted in 200 components = -0.00378437 Jy
! Clean residual min=-0.005050 max=0.003831 Jy/beam
! Clean residual mean=-0.000006 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.374297 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.374297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123893Jy  sigma=0.450253
! Fit after  self-cal, rms=0.124146Jy  sigma=0.450073
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000464198 Jy
! Component: 100  -  total flux cleaned = -0.000385253 Jy
! Component: 150  -  total flux cleaned = -0.000458037 Jy
! Component: 200  -  total flux cleaned = -0.000454064 Jy
! Total flux subtracted in 200 components = -0.000454064 Jy
! Clean residual min=-0.004839 max=0.003715 Jy/beam
! Clean residual mean=-0.000006 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.373843 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 127 components and 0.373843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124020Jy  sigma=0.449354
! Fit after  self-cal, rms=0.124005Jy  sigma=0.449294
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124005Jy  sigma=0.449294
! Fit after  self-cal, rms=0.127976Jy  sigma=0.448750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.189 mas, bmaj=8.136 mas, bpa=-5.153 degrees
! Estimated noise=1.35002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00206482 Jy
! Component: 100  -  total flux cleaned = -0.00251452 Jy
! Component: 150  -  total flux cleaned = -0.00275299 Jy
! Component: 200  -  total flux cleaned = -0.00296938 Jy
! Total flux subtracted in 200 components = -0.00296938 Jy
! Clean residual min=-0.004548 max=0.003404 Jy/beam
! Clean residual mean=-0.000006 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.370873 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 134 components and 0.370873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127792Jy  sigma=0.447831
! Fit after  self-cal, rms=0.127789Jy  sigma=0.447786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208403 Jy
! Component: 100  -  total flux cleaned = -0.000208671 Jy
! Component: 150  -  total flux cleaned = -0.000266023 Jy
! Component: 200  -  total flux cleaned = -0.000266993 Jy
! Total flux subtracted in 200 components = -0.000266993 Jy
! Clean residual min=-0.004384 max=0.003312 Jy/beam
! Clean residual mean=-0.000007 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.370606 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 142 components and 0.370606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127712Jy  sigma=0.447351
! Fit after  self-cal, rms=0.127704Jy  sigma=0.447317
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127704Jy  sigma=0.447317
! Fit after  self-cal, rms=0.130643Jy  sigma=0.447004
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.889 mas, bmaj=19.15 mas, bpa=-1.062 degrees
! Estimated noise=1.6526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108123 Jy
! Component: 100  -  total flux cleaned = -0.00145416 Jy
! Component: 150  -  total flux cleaned = -0.00169602 Jy
! Component: 200  -  total flux cleaned = -0.00189565 Jy
! Total flux subtracted in 200 components = -0.00189565 Jy
! Clean residual min=-0.004201 max=0.003261 Jy/beam
! Clean residual mean=-0.000011 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.368711 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 163 components and 0.368711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.130545Jy  sigma=0.446745
! Fit after  self-cal, rms=0.130539Jy  sigma=0.446556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.53783e-05 Jy
! Component: 100  -  total flux cleaned = 5.5616e-05 Jy
! Component: 150  -  total flux cleaned = 1.12364e-05 Jy
! Component: 200  -  total flux cleaned = -2.47371e-05 Jy
! Total flux subtracted in 200 components = -2.47371e-05 Jy
! Clean residual min=-0.004164 max=0.003238 Jy/beam
! Clean residual mean=-0.000011 rms=0.001060 Jy/beam
! Combined flux in latest and established models = 0.368686 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 173 components and 0.368686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.130500Jy  sigma=0.446444
! Fit after  self-cal, rms=0.130489Jy  sigma=0.446338
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=8.144 mas, bpa=-5.225 degrees
! Estimated noise=1.34867 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.185 x 8.144 at -5.225 degrees (North through East)
! Clean map  min=-0.0040757  max=0.26665 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.594 mas, bmaj=6.794 mas, bpa=-6.135 degrees
! Estimated noise=2.12674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.214642 Jy
! Component: 100  -  total flux cleaned = 0.275754 Jy
! Component: 150  -  total flux cleaned = 0.306579 Jy
! Component: 200  -  total flux cleaned = 0.325285 Jy
! Total flux subtracted in 200 components = 0.325285 Jy
! Clean residual min=-0.006846 max=0.011349 Jy/beam
! Clean residual mean=-0.000032 rms=0.001975 Jy/beam
! Combined flux in latest and established models = 0.325285 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.325285 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=8.144 mas, bpa=-5.225 degrees
! Estimated noise=1.34867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160785 Jy
! Component: 100  -  total flux cleaned = 0.0256682 Jy
! Component: 150  -  total flux cleaned = 0.0318413 Jy
! Component: 200  -  total flux cleaned = 0.0359276 Jy
! Total flux subtracted in 200 components = 0.0359276 Jy
! Clean residual min=-0.004365 max=0.003807 Jy/beam
! Clean residual mean=-0.000017 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.361213 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 88 components and 0.361213 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.889 mas, bmaj=19.15 mas, bpa=-1.062 degrees
! Estimated noise=1.6526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0041739 Jy
! Component: 100  -  total flux cleaned = 0.00620456 Jy
! Component: 150  -  total flux cleaned = 0.00730733 Jy
! Component: 200  -  total flux cleaned = 0.00751609 Jy
! Total flux subtracted in 200 components = 0.00751609 Jy
! Clean residual min=-0.004134 max=0.002951 Jy/beam
! Clean residual mean=-0.000010 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 0.368729 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010711 Jy
! Component: 100  -  total flux cleaned = 0.000182617 Jy
! Component: 150  -  total flux cleaned = 0.000231262 Jy
! Component: 200  -  total flux cleaned = 0.000277624 Jy
! Total flux subtracted in 200 components = 0.000277624 Jy
! Clean residual min=-0.004100 max=0.002975 Jy/beam
! Clean residual mean=-0.000009 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.369007 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 99 components and 0.369007 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=8.144 mas, bpa=-5.225 degrees
! Estimated noise=1.34867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000623253 Jy
! Component: 100  -  total flux cleaned = -0.000844387 Jy
! Component: 150  -  total flux cleaned = -0.000893755 Jy
! Component: 200  -  total flux cleaned = -0.00084908 Jy
! Total flux subtracted in 200 components = -0.00084908 Jy
! Clean residual min=-0.004011 max=0.002944 Jy/beam
! Clean residual mean=-0.000007 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.368157 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 112 components and 0.368157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.130487Jy  sigma=0.446100
! Fit after  self-cal, rms=0.130398Jy  sigma=0.445963
wmodel J1321-2636_S_map.mod
! Writing 112 model components to file: J1321-2636_S_map.mod
wobs   J1321-2636_S_uvs.fits
! Writing UV FITS file: J1321-2636_S_uvs.fits
wwins  J1321-2636_S_map.win
! wwins: Wrote 3 windows to J1321-2636_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00155803 Jy
! Component: 100  -  total flux cleaned = -0.00238424 Jy
! Component: 150  -  total flux cleaned = -0.00284971 Jy
! Component: 200  -  total flux cleaned = -0.00319406 Jy
! Component: 250  -  total flux cleaned = -0.00347632 Jy
! Component: 300  -  total flux cleaned = -0.00374964 Jy
! Component: 350  -  total flux cleaned = -0.00405774 Jy
! Component: 400  -  total flux cleaned = -0.00431416 Jy
! Component: 450  -  total flux cleaned = -0.00456372 Jy
! Component: 500  -  total flux cleaned = -0.0048468 Jy
! Component: 550  -  total flux cleaned = -0.00508408 Jy
! Component: 600  -  total flux cleaned = -0.00531595 Jy
! Component: 650  -  total flux cleaned = -0.00546775 Jy
! Component: 700  -  total flux cleaned = -0.00565434 Jy
! Component: 750  -  total flux cleaned = -0.00587078 Jy
! Component: 800  -  total flux cleaned = -0.00587013 Jy
! Component: 850  -  total flux cleaned = -0.00600923 Jy
! Component: 900  -  total flux cleaned = -0.00604293 Jy
! Component: 950  -  total flux cleaned = -0.00614414 Jy
! Component: 1000  -  total flux cleaned = -0.00617727 Jy
! Component: 1050  -  total flux cleaned = -0.00624207 Jy
! Component: 1100  -  total flux cleaned = -0.0062093 Jy
! Component: 1150  -  total flux cleaned = -0.00614641 Jy
! Component: 1200  -  total flux cleaned = -0.00627054 Jy
! Component: 1250  -  total flux cleaned = -0.00614849 Jy
! Component: 1300  -  total flux cleaned = -0.00614889 Jy
! Component: 1350  -  total flux cleaned = -0.00614867 Jy
! Component: 1400  -  total flux cleaned = -0.0061199 Jy
! Component: 1450  -  total flux cleaned = -0.00617672 Jy
! Component: 1500  -  total flux cleaned = -0.00609171 Jy
! Component: 1550  -  total flux cleaned = -0.00617475 Jy
! Component: 1600  -  total flux cleaned = -0.00611969 Jy
! Component: 1650  -  total flux cleaned = -0.00614641 Jy
! Component: 1700  -  total flux cleaned = -0.00617278 Jy
! Component: 1750  -  total flux cleaned = -0.00617264 Jy
! Component: 1800  -  total flux cleaned = -0.00619835 Jy
! Component: 1850  -  total flux cleaned = -0.00624949 Jy
! Component: 1900  -  total flux cleaned = -0.00632547 Jy
! Component: 1950  -  total flux cleaned = -0.00634997 Jy
! Component: 2000  -  total flux cleaned = -0.00635 Jy
! Component: 2050  -  total flux cleaned = -0.00639914 Jy
! Component: 2100  -  total flux cleaned = -0.00644754 Jy
! Component: 2150  -  total flux cleaned = -0.00649508 Jy
! Component: 2200  -  total flux cleaned = -0.00656538 Jy
! Component: 2250  -  total flux cleaned = -0.00658871 Jy
! Component: 2300  -  total flux cleaned = -0.00663446 Jy
! Component: 2350  -  total flux cleaned = -0.00661174 Jy
! Component: 2400  -  total flux cleaned = -0.00658921 Jy
! Component: 2450  -  total flux cleaned = -0.00663401 Jy
! Component: 2500  -  total flux cleaned = -0.00661237 Jy
! Component: 2550  -  total flux cleaned = -0.00665605 Jy
! Component: 2600  -  total flux cleaned = -0.00669877 Jy
! Component: 2650  -  total flux cleaned = -0.00672012 Jy
! Component: 2700  -  total flux cleaned = -0.0067833 Jy
! Component: 2750  -  total flux cleaned = -0.00678349 Jy
! Component: 2800  -  total flux cleaned = -0.00690698 Jy
! Component: 2850  -  total flux cleaned = -0.00694739 Jy
! Component: 2900  -  total flux cleaned = -0.00692711 Jy
! Component: 2950  -  total flux cleaned = -0.00696733 Jy
! Component: 3000  -  total flux cleaned = -0.00702694 Jy
! Component: 3050  -  total flux cleaned = -0.00704659 Jy
! Component: 3100  -  total flux cleaned = -0.00700769 Jy
! Component: 3150  -  total flux cleaned = -0.00710434 Jy
! Component: 3200  -  total flux cleaned = -0.00708506 Jy
! Component: 3250  -  total flux cleaned = -0.00708515 Jy
! Component: 3300  -  total flux cleaned = -0.00712295 Jy
! Component: 3350  -  total flux cleaned = -0.00706692 Jy
! Component: 3400  -  total flux cleaned = -0.00714099 Jy
! Component: 3450  -  total flux cleaned = -0.00710403 Jy
! Component: 3500  -  total flux cleaned = -0.0071404 Jy
! Component: 3550  -  total flux cleaned = -0.00715839 Jy
! Component: 3600  -  total flux cleaned = -0.00714027 Jy
! Component: 3650  -  total flux cleaned = -0.00710463 Jy
! Component: 3700  -  total flux cleaned = -0.00713981 Jy
! Component: 3750  -  total flux cleaned = -0.00706996 Jy
! Component: 3800  -  total flux cleaned = -0.00710456 Jy
! Component: 3850  -  total flux cleaned = -0.00710448 Jy
! Component: 3900  -  total flux cleaned = -0.00708739 Jy
! Component: 3950  -  total flux cleaned = -0.00705352 Jy
! Component: 4000  -  total flux cleaned = -0.00705373 Jy
! Component: 4050  -  total flux cleaned = -0.00713745 Jy
! Total flux subtracted in 4096 components = -0.00715391 Jy
! Clean residual min=-0.001160 max=0.001001 Jy/beam
! Clean residual mean=-0.000003 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.361004 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 407 components and 0.361004 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1321-2636_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.185 x 8.144 at -5.225 degrees (North through East)
! Clean map  min=-0.0022287  max=0.27278 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1321-2636_S_map.fits
wmodel /image_prod/ug002_uva//J1321-2636_S_map.mod
! Writing 407 model components to file: /image_prod/ug002_uva//J1321-2636_S_map.mod
wobs   /image_prod/ug002_uva//J1321-2636_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1321-2636_S_uvs.fits
wwins  /image_prod/ug002_uva//J1321-2636_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1321-2636_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.272778 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000303874 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.334199 0.334199 0.668398 1.3368 2.67359 5.34719 10.6944 21.3887 42.7775 85.555
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.272 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  897.668 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1321-2636_S_dfm.log closed on Thu Mar  5 01:10:48 2020