! Started logfile: /image_prod/ug002_uva//J1317-1345_X_dfm.log on Thu Mar  5 01:08:39 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1317-1345_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1317-1345_X_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.984 visibilities/baseline/integration-bin.
! Found source: J1317-1345
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26568 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1317-1345_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011453Jy  sigma=8.406325
! Fit after  self-cal, rms=0.872066Jy  sigma=7.220476
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6846 mas, bmaj=1.63 mas, bpa=-2.727 degrees
! Estimated noise=1.06096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0939919 Jy
! Component: 100  -  total flux cleaned = 0.126339 Jy
! Total flux subtracted in 100 components = 0.126339 Jy
! Clean residual min=-0.007742 max=0.027658 Jy/beam
! Clean residual mean=-0.000000 rms=0.002236 Jy/beam
! Combined flux in latest and established models = 0.126339 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.126339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078264Jy  sigma=0.618705
! Fit after  self-cal, rms=0.078077Jy  sigma=0.617311
! Inverting map 
! Added new window around map position (-1.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244521 Jy
! Component: 100  -  total flux cleaned = 0.0375242 Jy
! Total flux subtracted in 100 components = 0.0375242 Jy
! Clean residual min=-0.005429 max=0.012697 Jy/beam
! Clean residual mean=0.000000 rms=0.001378 Jy/beam
! Combined flux in latest and established models = 0.163863 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.163863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068374Jy  sigma=0.526887
! Fit after  self-cal, rms=0.067535Jy  sigma=0.519629
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106691 Jy
! Component: 100  -  total flux cleaned = 0.0155674 Jy
! Total flux subtracted in 100 components = 0.0155674 Jy
! Clean residual min=-0.004612 max=0.007957 Jy/beam
! Clean residual mean=0.000001 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.179431 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.179431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065377Jy  sigma=0.499475
! Fit after  self-cal, rms=0.065182Jy  sigma=0.497885
! Inverting map 
! Added new window around map position (1, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00614502 Jy
! Component: 100  -  total flux cleaned = 0.00846074 Jy
! Total flux subtracted in 100 components = 0.00846074 Jy
! Clean residual min=-0.003782 max=0.003914 Jy/beam
! Clean residual mean=0.000001 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.187892 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.187891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064465Jy  sigma=0.491300
! Fit after  self-cal, rms=0.064449Jy  sigma=0.491236
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8824 mas, bmaj=2.026 mas, bpa=-2.962 degrees
! Estimated noise=0.533581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430707 Jy
! Component: 100  -  total flux cleaned = 0.00636738 Jy
! Component: 150  -  total flux cleaned = 0.00731118 Jy
! Component: 200  -  total flux cleaned = 0.00788195 Jy
! Total flux subtracted in 200 components = 0.00788195 Jy
! Clean residual min=-0.003356 max=0.003202 Jy/beam
! Clean residual mean=0.000002 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.195773 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 43 components and 0.195773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064117Jy  sigma=0.488285
! Fit after  self-cal, rms=0.064090Jy  sigma=0.488091
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8824 x 2.026 at -2.962 degrees (North through East)
! Clean map  min=-0.0031206  max=0.11388 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.05     KP        1.04     
!   LA        1.06     MK        0.99     NL        1.12     OV        0.96     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     HN        1.01     KP        1.04     
!   LA        1.05     MK        1.01     NL        1.09     OV        0.95     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        1.04     KP        1.04     
!   LA        1.07     MK        1.01     NL        1.10     OV        0.96     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.00     KP        1.03     
!   LA        1.04     MK        1.06     NL        1.12     OV        0.95     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.98     KP        1.06     
!   LA        1.05     MK        0.99     NL        1.06     OV        0.95     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.00     KP        1.07     
!   LA        1.07     MK        0.98     NL        1.10     OV        0.96     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        0.99     KP        1.05     
!   LA        1.08     MK        1.03     NL        1.10     OV        0.96     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.01     KP        1.08     
!   LA        1.07     MK        1.03     NL        1.07     OV        0.95     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        0.97     KP        1.02     
!   LA        1.04     MK        1.03     NL        1.11     OV        0.96     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.03     KP        1.04     
!   LA        1.07     MK        1.01     NL        1.09     OV        0.96     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.97     KP        1.05     
!   LA        1.06     MK        0.99     NL        1.09     OV        0.96     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        1.03     KP        1.03     
!   LA        1.09     MK        0.96     NL        1.13     OV        0.95     
!   PT        0.94     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.064090Jy  sigma=0.488091
! Fit after  self-cal, rms=0.062602Jy  sigma=0.480435
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8806 mas, bmaj=2.021 mas, bpa=-2.443 degrees
! Estimated noise=0.536629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000603369 Jy
! Component: 100  -  total flux cleaned = -0.00111421 Jy
! Component: 150  -  total flux cleaned = -0.00137071 Jy
! Component: 200  -  total flux cleaned = -0.00154429 Jy
! Total flux subtracted in 200 components = -0.00154429 Jy
! Clean residual min=-0.001663 max=0.001860 Jy/beam
! Clean residual mean=0.000001 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.194229 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 0.194229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062501Jy  sigma=0.479671
! Fit after  self-cal, rms=0.062473Jy  sigma=0.479511
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062473Jy  sigma=0.479511
! Fit after  self-cal, rms=0.062473Jy  sigma=0.477846
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8792 mas, bmaj=2.022 mas, bpa=-2.384 degrees
! Estimated noise=0.53602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013976 Jy
! Component: 100  -  total flux cleaned = -0.000428023 Jy
! Component: 150  -  total flux cleaned = -0.000631114 Jy
! Component: 200  -  total flux cleaned = -0.000830687 Jy
! Total flux subtracted in 200 components = -0.000830687 Jy
! Clean residual min=-0.001373 max=0.001380 Jy/beam
! Clean residual mean=0.000004 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.193398 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 66 components and 0.193398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062425Jy  sigma=0.477459
! Fit after  self-cal, rms=0.062426Jy  sigma=0.477397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, -18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000900608 Jy
! Component: 100  -  total flux cleaned = 0.000863274 Jy
! Component: 150  -  total flux cleaned = 0.000863441 Jy
! Component: 200  -  total flux cleaned = 0.000806287 Jy
! Total flux subtracted in 200 components = 0.000806287 Jy
! Clean residual min=-0.001295 max=0.001341 Jy/beam
! Clean residual mean=0.000004 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.194205 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 74 components and 0.194205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062380Jy  sigma=0.477014
! Fit after  self-cal, rms=0.062377Jy  sigma=0.476984
! Inverting map 
! Added new window around map position (49.2, 31.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128192 Jy
! Component: 100  -  total flux cleaned = 0.00174304 Jy
! Component: 150  -  total flux cleaned = 0.00199065 Jy
! Component: 200  -  total flux cleaned = 0.00201517 Jy
! Total flux subtracted in 200 components = 0.00201517 Jy
! Clean residual min=-0.001170 max=0.001227 Jy/beam
! Clean residual mean=0.000003 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.19622 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 85 components and 0.19622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062342Jy  sigma=0.476692
! Fit after  self-cal, rms=0.062340Jy  sigma=0.476677
! Inverting map 
! Added new window around map position (-0.8, 17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000838951 Jy
! Component: 100  -  total flux cleaned = 0.000997091 Jy
! Component: 150  -  total flux cleaned = 0.00109156 Jy
! Component: 200  -  total flux cleaned = 0.00109235 Jy
! Total flux subtracted in 200 components = 0.00109235 Jy
! Clean residual min=-0.001120 max=0.001129 Jy/beam
! Clean residual mean=0.000003 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.197312 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 96 components and 0.197312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062314Jy  sigma=0.476482
! Fit after  self-cal, rms=0.062312Jy  sigma=0.476470
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062312Jy  sigma=0.476470
! Fit after  self-cal, rms=0.062282Jy  sigma=0.476397
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8782 mas, bmaj=2.017 mas, bpa=-2.355 degrees
! Estimated noise=0.535983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208403 Jy
! Component: 100  -  total flux cleaned = -0.000137569 Jy
! Component: 150  -  total flux cleaned = -4.98916e-05 Jy
! Component: 200  -  total flux cleaned = -6.86086e-05 Jy
! Total flux subtracted in 200 components = -6.86086e-05 Jy
! Clean residual min=-0.001057 max=0.001038 Jy/beam
! Clean residual mean=0.000003 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.197244 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 106 components and 0.197244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062265Jy  sigma=0.476258
! Fit after  self-cal, rms=0.062264Jy  sigma=0.476251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109571 Jy
! Component: 100  -  total flux cleaned = 0.000110873 Jy
! Component: 150  -  total flux cleaned = 7.62678e-05 Jy
! Component: 200  -  total flux cleaned = 2.67913e-05 Jy
! Total flux subtracted in 200 components = 2.67913e-05 Jy
! Clean residual min=-0.001063 max=0.001010 Jy/beam
! Clean residual mean=0.000003 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.19727 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 115 components and 0.19727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062254Jy  sigma=0.476177
! Fit after  self-cal, rms=0.062254Jy  sigma=0.476173
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062254Jy  sigma=0.476173
! Fit after  self-cal, rms=0.062264Jy  sigma=0.476154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=3.941 mas, bpa=0.3874 degrees
! Estimated noise=0.67918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.70267e-06 Jy
! Component: 100  -  total flux cleaned = -0.000260525 Jy
! Component: 150  -  total flux cleaned = -0.000456632 Jy
! Component: 200  -  total flux cleaned = -0.000532022 Jy
! Total flux subtracted in 200 components = -0.000532022 Jy
! Clean residual min=-0.001279 max=0.001071 Jy/beam
! Clean residual mean=0.000005 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.196738 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 123 components and 0.196738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062262Jy  sigma=0.476114
! Fit after  self-cal, rms=0.062259Jy  sigma=0.476097
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.97854e-06 Jy
! Component: 100  -  total flux cleaned = -3.83574e-05 Jy
! Component: 150  -  total flux cleaned = -7.61431e-05 Jy
! Component: 200  -  total flux cleaned = -0.000143593 Jy
! Total flux subtracted in 200 components = -0.000143593 Jy
! Clean residual min=-0.001239 max=0.001043 Jy/beam
! Clean residual mean=0.000005 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.196595 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 130 components and 0.196595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062260Jy  sigma=0.476086
! Fit after  self-cal, rms=0.062258Jy  sigma=0.476076
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8775 mas, bmaj=2.015 mas, bpa=-2.31 degrees
! Estimated noise=0.536086 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8775 x 2.015 at -2.31 degrees (North through East)
! Clean map  min=-0.0011537  max=0.11391 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6812 mas, bmaj=1.625 mas, bpa=-2.11 degrees
! Estimated noise=1.05793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0937468 Jy
! Component: 100  -  total flux cleaned = 0.132091 Jy
! Component: 150  -  total flux cleaned = 0.153109 Jy
! Component: 200  -  total flux cleaned = 0.165764 Jy
! Total flux subtracted in 200 components = 0.165764 Jy
! Clean residual min=-0.004305 max=0.006900 Jy/beam
! Clean residual mean=0.000000 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.165764 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.165764 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8775 mas, bmaj=2.015 mas, bpa=-2.31 degrees
! Estimated noise=0.536086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011983 Jy
! Component: 100  -  total flux cleaned = 0.0186059 Jy
! Component: 150  -  total flux cleaned = 0.0226418 Jy
! Component: 200  -  total flux cleaned = 0.0241462 Jy
! Total flux subtracted in 200 components = 0.0241462 Jy
! Clean residual min=-0.001646 max=0.002002 Jy/beam
! Clean residual mean=0.000003 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.18991 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 51 components and 0.18991 Jy
! Inverting map 
! Added new window around map position (-0.4, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144873 Jy
! Component: 100  -  total flux cleaned = 0.00236699 Jy
! Component: 150  -  total flux cleaned = 0.00309638 Jy
! Component: 200  -  total flux cleaned = 0.00373853 Jy
! Total flux subtracted in 200 components = 0.00373853 Jy
! Clean residual min=-0.001322 max=0.001266 Jy/beam
! Clean residual mean=0.000003 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.193649 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 73 components and 0.193649 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=3.941 mas, bpa=0.3874 degrees
! Estimated noise=0.67918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000942833 Jy
! Component: 100  -  total flux cleaned = 0.00153554 Jy
! Component: 150  -  total flux cleaned = 0.00198363 Jy
! Component: 200  -  total flux cleaned = 0.00217304 Jy
! Total flux subtracted in 200 components = 0.00217304 Jy
! Clean residual min=-0.001311 max=0.001188 Jy/beam
! Clean residual mean=0.000005 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.195822 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000165817 Jy
! Component: 100  -  total flux cleaned = 0.000291446 Jy
! Component: 150  -  total flux cleaned = 0.000346833 Jy
! Component: 200  -  total flux cleaned = 0.000398425 Jy
! Total flux subtracted in 200 components = 0.000398425 Jy
! Clean residual min=-0.001233 max=0.001199 Jy/beam
! Clean residual mean=0.000005 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.19622 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 99 components and 0.19622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8775 mas, bmaj=2.015 mas, bpa=-2.31 degrees
! Estimated noise=0.536086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000375435 Jy
! Component: 100  -  total flux cleaned = -0.000224021 Jy
! Component: 150  -  total flux cleaned = -1.93695e-05 Jy
! Component: 200  -  total flux cleaned = 0.000134498 Jy
! Total flux subtracted in 200 components = 0.000134498 Jy
! Clean residual min=-0.001044 max=0.000949 Jy/beam
! Clean residual mean=0.000002 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.196355 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.196355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062300Jy  sigma=0.476421
! Fit after  self-cal, rms=0.062286Jy  sigma=0.476283
wmodel J1317-1345_X_map.mod
! Writing 115 model components to file: J1317-1345_X_map.mod
wobs   J1317-1345_X_uvs.fits
! Writing UV FITS file: J1317-1345_X_uvs.fits
wwins  J1317-1345_X_map.win
! wwins: Wrote 7 windows to J1317-1345_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017124 Jy
! Component: 100  -  total flux cleaned = -0.000294865 Jy
! Component: 150  -  total flux cleaned = -0.000430576 Jy
! Component: 200  -  total flux cleaned = -0.000446924 Jy
! Component: 250  -  total flux cleaned = -0.000431039 Jy
! Component: 300  -  total flux cleaned = -0.000415444 Jy
! Component: 350  -  total flux cleaned = -0.000369588 Jy
! Component: 400  -  total flux cleaned = -0.000324767 Jy
! Component: 450  -  total flux cleaned = -0.000251127 Jy
! Component: 500  -  total flux cleaned = -0.000207711 Jy
! Component: 550  -  total flux cleaned = -0.00017904 Jy
! Component: 600  -  total flux cleaned = -0.000136999 Jy
! Component: 650  -  total flux cleaned = -0.000137202 Jy
! Component: 700  -  total flux cleaned = -0.000137416 Jy
! Component: 750  -  total flux cleaned = -0.000164373 Jy
! Component: 800  -  total flux cleaned = -0.000124562 Jy
! Component: 850  -  total flux cleaned = -0.00015078 Jy
! Component: 900  -  total flux cleaned = -0.000111725 Jy
! Component: 950  -  total flux cleaned = -6.06649e-05 Jy
! Component: 1000  -  total flux cleaned = -2.26845e-05 Jy
! Component: 1050  -  total flux cleaned = 2.02795e-06 Jy
! Component: 1100  -  total flux cleaned = -4.734e-05 Jy
! Component: 1150  -  total flux cleaned = 1.52483e-06 Jy
! Component: 1200  -  total flux cleaned = -2.27942e-05 Jy
! Component: 1250  -  total flux cleaned = -2.28196e-05 Jy
! Component: 1300  -  total flux cleaned = -3.46685e-05 Jy
! Component: 1350  -  total flux cleaned = -3.45611e-05 Jy
! Component: 1400  -  total flux cleaned = -2.31292e-05 Jy
! Component: 1450  -  total flux cleaned = -6.89097e-05 Jy
! Component: 1500  -  total flux cleaned = -3.48254e-05 Jy
! Component: 1550  -  total flux cleaned = -1.24624e-05 Jy
! Component: 1600  -  total flux cleaned = -1.24646e-05 Jy
! Component: 1650  -  total flux cleaned = -1.26228e-05 Jy
! Component: 1700  -  total flux cleaned = -2.3671e-05 Jy
! Component: 1750  -  total flux cleaned = -2.36552e-05 Jy
! Component: 1800  -  total flux cleaned = -2.35395e-05 Jy
! Component: 1850  -  total flux cleaned = -5.54536e-05 Jy
! Component: 1900  -  total flux cleaned = -5.53463e-05 Jy
! Component: 1950  -  total flux cleaned = -2.40309e-05 Jy
! Component: 2000  -  total flux cleaned = -6.53185e-05 Jy
! Component: 2050  -  total flux cleaned = -6.52801e-05 Jy
! Component: 2100  -  total flux cleaned = -6.52477e-05 Jy
! Component: 2150  -  total flux cleaned = -6.51149e-05 Jy
! Component: 2200  -  total flux cleaned = -6.51423e-05 Jy
! Component: 2250  -  total flux cleaned = -1.54219e-05 Jy
! Component: 2300  -  total flux cleaned = -1.54486e-05 Jy
! Component: 2350  -  total flux cleaned = -1.53378e-05 Jy
! Component: 2400  -  total flux cleaned = -3.47537e-05 Jy
! Component: 2450  -  total flux cleaned = -2.51271e-05 Jy
! Component: 2500  -  total flux cleaned = -2.50994e-05 Jy
! Component: 2550  -  total flux cleaned = -2.51068e-05 Jy
! Component: 2600  -  total flux cleaned = -3.45246e-05 Jy
! Component: 2650  -  total flux cleaned = -3.4404e-05 Jy
! Component: 2700  -  total flux cleaned = -2.50798e-05 Jy
! Component: 2750  -  total flux cleaned = -4.3472e-05 Jy
! Component: 2800  -  total flux cleaned = -6.16956e-05 Jy
! Component: 2850  -  total flux cleaned = -5.27387e-05 Jy
! Component: 2900  -  total flux cleaned = -7.06809e-05 Jy
! Component: 2950  -  total flux cleaned = -4.39998e-05 Jy
! Component: 3000  -  total flux cleaned = -6.1586e-05 Jy
! Component: 3050  -  total flux cleaned = -5.28009e-05 Jy
! Component: 3100  -  total flux cleaned = -5.27798e-05 Jy
! Component: 3150  -  total flux cleaned = -4.4181e-05 Jy
! Component: 3200  -  total flux cleaned = -2.70371e-05 Jy
! Component: 3250  -  total flux cleaned = -4.40604e-05 Jy
! Component: 3300  -  total flux cleaned = -3.54989e-05 Jy
! Component: 3350  -  total flux cleaned = -1.7954e-06 Jy
! Component: 3400  -  total flux cleaned = 3.17715e-05 Jy
! Component: 3450  -  total flux cleaned = 6.77568e-06 Jy
! Component: 3500  -  total flux cleaned = 6.74376e-06 Jy
! Component: 3550  -  total flux cleaned = 3.96934e-05 Jy
! Component: 3600  -  total flux cleaned = 2.33372e-05 Jy
! Component: 3650  -  total flux cleaned = 7.04555e-06 Jy
! Component: 3700  -  total flux cleaned = 1.52264e-05 Jy
! Component: 3750  -  total flux cleaned = 7.15547e-05 Jy
! Component: 3800  -  total flux cleaned = 6.35878e-05 Jy
! Component: 3850  -  total flux cleaned = 8.74836e-05 Jy
! Component: 3900  -  total flux cleaned = 9.53961e-05 Jy
! Component: 3950  -  total flux cleaned = 7.18128e-05 Jy
! Component: 4000  -  total flux cleaned = 0.000126546 Jy
! Component: 4050  -  total flux cleaned = 0.000118722 Jy
! Total flux subtracted in 4096 components = 0.000165128 Jy
! Clean residual min=-0.000434 max=0.000492 Jy/beam
! Clean residual mean=0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.19652 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 403 components and 0.19652 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1317-1345_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8775 x 2.015 at -2.31 degrees (North through East)
! Clean map  min=-0.00078106  max=0.11312 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1317-1345_X_map.fits
wmodel /image_prod/ug002_uva//J1317-1345_X_map.mod
! Writing 403 model components to file: /image_prod/ug002_uva//J1317-1345_X_map.mod
wobs   /image_prod/ug002_uva//J1317-1345_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1317-1345_X_uvs.fits
wwins  /image_prod/ug002_uva//J1317-1345_X_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1317-1345_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.11312 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000130501 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.346095 0.346095 0.69219 1.38438 2.76876 5.53752 11.075 22.1501 44.3002 88.6003
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  866.814 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1317-1345_X_dfm.log closed on Thu Mar  5 01:08:43 2020