! Started logfile: /image_prod/ug002_uva//J1317+4115_X_dfm.log on Thu Mar 5 01:08:27 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1317+4115_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1317+4115_X_uva.fits ! AN table 1: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.911905 visibilities/baseline/integration-bin. ! Found source: J1317+4115 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 18384 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1317+4115_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003886Jy sigma=9.147176 ! Fit after self-cal, rms=0.964464Jy sigma=8.766512 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6902 mas, bmaj=1.065 mas, bpa=-1.364 degrees ! Estimated noise=1.15157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257973 Jy ! Component: 100 - total flux cleaned = 0.0342038 Jy ! Total flux subtracted in 100 components = 0.0342038 Jy ! Clean residual min=-0.004505 max=0.005441 Jy/beam ! Clean residual mean=0.000005 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.0342039 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0342039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061060Jy sigma=0.543221 ! Fit after self-cal, rms=0.059748Jy sigma=0.531962 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8726 mas, bmaj=1.287 mas, bpa=0.6935 degrees ! Estimated noise=0.581026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010626 Jy ! Component: 100 - total flux cleaned = 0.0166891 Jy ! Component: 150 - total flux cleaned = 0.0207273 Jy ! Component: 200 - total flux cleaned = 0.0235348 Jy ! Total flux subtracted in 200 components = 0.0235348 Jy ! Clean residual min=-0.005174 max=0.007310 Jy/beam ! Clean residual mean=0.000005 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.0577386 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.0577386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058078Jy sigma=0.509511 ! Fit after self-cal, rms=0.057961Jy sigma=0.508068 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8726 x 1.287 at 0.6935 degrees (North through East) ! Clean map min=-0.0049628 max=0.038616 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.74 HN 1.32 KP 0.66 ! MK 1.27 NL 1.70 OV 0.86 SC 1.21 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.79 HN 1.28 KP 0.66 ! MK 1.31 NL 1.87 OV 0.79 SC 1.18 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.82 HN 1.22 KP 0.66 ! MK 1.22 NL 1.90 OV 0.88 SC 1.27 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.79 HN 1.33 KP 0.64 ! MK 1.30 NL 1.82 OV 0.81 SC 1.19 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.79 HN 1.36 KP 0.63 ! MK 1.30 NL 1.89 OV 0.85 SC 1.22 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.81 HN 1.12 KP 0.66 ! MK 1.18 NL 1.64 OV 0.86 SC 1.18 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.75 HN 1.22 KP 0.67 ! MK 1.24 NL 1.77 OV 0.86 SC 1.39 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.81 HN 1.19 KP 0.72 ! MK 1.07 NL 1.70 OV 0.88 SC 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.82 HN 1.16 KP 0.69 ! MK 1.08 NL 1.54 OV 0.84 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.82 HN 1.08 KP 0.67 ! MK 1.24 NL 1.67 OV 0.83 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.86 HN 1.00 KP 0.75 ! MK 1.13 NL 1.56 OV 0.79 SC 1.11 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.78 HN 1.09 KP 0.66 ! MK 1.12 NL 1.68 OV 0.90 SC 0.90 ! ! ! Fit before self-cal, rms=0.057961Jy sigma=0.508068 ! Fit after self-cal, rms=0.069600Jy sigma=0.482616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9322 mas, bmaj=1.352 mas, bpa=2.652 degrees ! Estimated noise=0.601022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457407 Jy ! Component: 100 - total flux cleaned = 0.00501662 Jy ! Component: 150 - total flux cleaned = 0.00527937 Jy ! Component: 200 - total flux cleaned = 0.00514003 Jy ! Total flux subtracted in 200 components = 0.00514003 Jy ! Clean residual min=-0.003543 max=0.004694 Jy/beam ! Clean residual mean=-0.000003 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.0628787 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.0628787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069242Jy sigma=0.477430 ! Fit after self-cal, rms=0.070537Jy sigma=0.471772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070537Jy sigma=0.471772 ! Fit after self-cal, rms=0.079201Jy sigma=0.466877 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8905 mas, bmaj=1.353 mas, bpa=-2.345 degrees ! Estimated noise=0.585679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281663 Jy ! Component: 100 - total flux cleaned = 0.00306104 Jy ! Component: 150 - total flux cleaned = 0.00282179 Jy ! Component: 200 - total flux cleaned = 0.00261249 Jy ! Total flux subtracted in 200 components = 0.00261249 Jy ! Clean residual min=-0.002960 max=0.003139 Jy/beam ! Clean residual mean=-0.000002 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0654912 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.0654911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078964Jy sigma=0.465376 ! Fit after self-cal, rms=0.079153Jy sigma=0.463826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.4, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031985 Jy ! Component: 100 - total flux cleaned = 0.00403017 Jy ! Component: 150 - total flux cleaned = 0.00410185 Jy ! Component: 200 - total flux cleaned = 0.00399523 Jy ! Total flux subtracted in 200 components = 0.00399523 Jy ! Clean residual min=-0.002529 max=0.002912 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0694864 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 86 components and 0.0694864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078867Jy sigma=0.462444 ! Fit after self-cal, rms=0.078531Jy sigma=0.461609 ! Inverting map ! Added new window around map position (-2.8, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320667 Jy ! Component: 100 - total flux cleaned = 0.0045243 Jy ! Component: 150 - total flux cleaned = 0.00525462 Jy ! Component: 200 - total flux cleaned = 0.00562879 Jy ! Total flux subtracted in 200 components = 0.00562879 Jy ! Clean residual min=-0.002899 max=0.002886 Jy/beam ! Clean residual mean=-0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0751152 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.0751152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078205Jy sigma=0.460009 ! Fit after self-cal, rms=0.077899Jy sigma=0.459190 ! Inverting map ! Added new window around map position (6.6, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314494 Jy ! Component: 100 - total flux cleaned = 0.00539173 Jy ! Component: 150 - total flux cleaned = 0.00671229 Jy ! Component: 200 - total flux cleaned = 0.00758698 Jy ! Total flux subtracted in 200 components = 0.00758698 Jy ! Clean residual min=-0.002655 max=0.002637 Jy/beam ! Clean residual mean=-0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.0827021 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.0827021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077491Jy sigma=0.458003 ! Fit after self-cal, rms=0.077202Jy sigma=0.457359 ! Inverting map ! Added new window around map position (-7.6, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282874 Jy ! Component: 100 - total flux cleaned = 0.00399424 Jy ! Component: 150 - total flux cleaned = 0.0045714 Jy ! Component: 200 - total flux cleaned = 0.00502028 Jy ! Total flux subtracted in 200 components = 0.00502028 Jy ! Clean residual min=-0.002613 max=0.002710 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0877224 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 120 components and 0.0877224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076859Jy sigma=0.456370 ! Fit after self-cal, rms=0.076594Jy sigma=0.455865 ! Inverting map ! Added new window around map position (-23.2, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028012 Jy ! Component: 100 - total flux cleaned = 0.00436382 Jy ! Component: 150 - total flux cleaned = 0.00552674 Jy ! Component: 200 - total flux cleaned = 0.00605042 Jy ! Total flux subtracted in 200 components = 0.00605042 Jy ! Clean residual min=-0.002553 max=0.002694 Jy/beam ! Clean residual mean=-0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0937729 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 136 components and 0.0937729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076230Jy sigma=0.454802 ! Fit after self-cal, rms=0.075959Jy sigma=0.454172 ! Inverting map ! Added new window around map position (3.2, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282427 Jy ! Component: 100 - total flux cleaned = 0.00483468 Jy ! Component: 150 - total flux cleaned = 0.00640306 Jy ! Component: 200 - total flux cleaned = 0.00743007 Jy ! Total flux subtracted in 200 components = 0.00743007 Jy ! Clean residual min=-0.002377 max=0.002495 Jy/beam ! Clean residual mean=-0.000001 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.101203 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 157 components and 0.101203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075597Jy sigma=0.452943 ! Fit after self-cal, rms=0.075395Jy sigma=0.452501 ! Inverting map ! Added new window around map position (-3.8, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235839 Jy ! Component: 100 - total flux cleaned = 0.00368345 Jy ! Component: 150 - total flux cleaned = 0.00460577 Jy ! Component: 200 - total flux cleaned = 0.00546263 Jy ! Total flux subtracted in 200 components = 0.00546263 Jy ! Clean residual min=-0.002291 max=0.002402 Jy/beam ! Clean residual mean=-0.000001 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.106666 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 172 components and 0.106666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075068Jy sigma=0.451550 ! Fit after self-cal, rms=0.074878Jy sigma=0.451130 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074878Jy sigma=0.451130 ! Fit after self-cal, rms=0.067536Jy sigma=0.448347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=1.349 mas, bpa=-3.386 degrees ! Estimated noise=0.572875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147748 Jy ! Component: 100 - total flux cleaned = 0.00256125 Jy ! Component: 150 - total flux cleaned = 0.00349708 Jy ! Component: 200 - total flux cleaned = 0.004285 Jy ! Total flux subtracted in 200 components = 0.004285 Jy ! Clean residual min=-0.001983 max=0.002264 Jy/beam ! Clean residual mean=-0.000000 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.110951 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 198 components and 0.110951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067323Jy sigma=0.447298 ! Fit after self-cal, rms=0.066991Jy sigma=0.446512 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018107 Jy ! Component: 100 - total flux cleaned = 0.00275881 Jy ! Component: 150 - total flux cleaned = 0.00354948 Jy ! Component: 200 - total flux cleaned = 0.00428001 Jy ! Total flux subtracted in 200 components = 0.00428001 Jy ! Clean residual min=-0.001943 max=0.002151 Jy/beam ! Clean residual mean=-0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.115231 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 214 components and 0.115231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066770Jy sigma=0.445514 ! Fit after self-cal, rms=0.066590Jy sigma=0.444960 ! Inverting map ! Added new window around map position (-3, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017491 Jy ! Component: 100 - total flux cleaned = 0.00236774 Jy ! Component: 150 - total flux cleaned = 0.0030402 Jy ! Component: 200 - total flux cleaned = 0.00345724 Jy ! Total flux subtracted in 200 components = 0.00345724 Jy ! Clean residual min=-0.001957 max=0.002042 Jy/beam ! Clean residual mean=-0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.118688 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 226 components and 0.118688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066411Jy sigma=0.444143 ! Fit after self-cal, rms=0.066288Jy sigma=0.443839 ! Inverting map ! Added new window around map position (-14, -25.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208769 Jy ! Component: 100 - total flux cleaned = 0.00349232 Jy ! Component: 150 - total flux cleaned = 0.00425146 Jy ! Component: 200 - total flux cleaned = 0.00496068 Jy ! Total flux subtracted in 200 components = 0.00496068 Jy ! Clean residual min=-0.001886 max=0.001964 Jy/beam ! Clean residual mean=-0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.123648 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 242 components and 0.123649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066104Jy sigma=0.443040 ! Fit after self-cal, rms=0.065952Jy sigma=0.442823 ! Inverting map ! Added new window around map position (-11, -18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195108 Jy ! Component: 100 - total flux cleaned = 0.00318694 Jy ! Component: 150 - total flux cleaned = 0.00409286 Jy ! Component: 200 - total flux cleaned = 0.00463691 Jy ! Total flux subtracted in 200 components = 0.00463691 Jy ! Clean residual min=-0.001695 max=0.001691 Jy/beam ! Clean residual mean=-0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.128285 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 254 components and 0.128285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065788Jy sigma=0.442055 ! Fit after self-cal, rms=0.065680Jy sigma=0.441908 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065680Jy sigma=0.441908 ! Fit after self-cal, rms=0.061177Jy sigma=0.440780 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.948 mas, bmaj=2.145 mas, bpa=6.16 degrees ! Estimated noise=0.672609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110595 Jy ! Component: 100 - total flux cleaned = 0.00149248 Jy ! Component: 150 - total flux cleaned = 0.00186623 Jy ! Component: 200 - total flux cleaned = 0.00233687 Jy ! Total flux subtracted in 200 components = 0.00233687 Jy ! Clean residual min=-0.001674 max=0.001660 Jy/beam ! Clean residual mean=-0.000000 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.130622 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 270 components and 0.130622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061092Jy sigma=0.440448 ! Fit after self-cal, rms=0.060846Jy sigma=0.439973 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070497 Jy ! Component: 100 - total flux cleaned = 0.00108042 Jy ! Component: 150 - total flux cleaned = 0.00140716 Jy ! Component: 200 - total flux cleaned = 0.00177302 Jy ! Total flux subtracted in 200 components = 0.00177302 Jy ! Clean residual min=-0.001665 max=0.001455 Jy/beam ! Clean residual mean=-0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.132395 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 281 components and 0.132395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060788Jy sigma=0.439871 ! Fit after self-cal, rms=0.060725Jy sigma=0.439576 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8833 mas, bmaj=1.342 mas, bpa=-2.769 degrees ! Estimated noise=0.560646 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8833 x 1.342 at -2.769 degrees (North through East) ! Clean map min=-0.0032621 max=0.034209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6914 mas, bmaj=1.114 mas, bpa=-4.472 degrees ! Estimated noise=1.12227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246092 Jy ! Component: 100 - total flux cleaned = 0.0382867 Jy ! Component: 150 - total flux cleaned = 0.0482335 Jy ! Component: 200 - total flux cleaned = 0.0562519 Jy ! Total flux subtracted in 200 components = 0.0562519 Jy ! Clean residual min=-0.004631 max=0.005713 Jy/beam ! Clean residual mean=0.000002 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.0562519 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0562519 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8833 mas, bmaj=1.342 mas, bpa=-2.769 degrees ! Estimated noise=0.560646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00962235 Jy ! Component: 100 - total flux cleaned = 0.0167818 Jy ! Component: 150 - total flux cleaned = 0.0220869 Jy ! Component: 200 - total flux cleaned = 0.0266969 Jy ! Total flux subtracted in 200 components = 0.0266969 Jy ! Clean residual min=-0.003778 max=0.004640 Jy/beam ! Clean residual mean=0.000001 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.0829488 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 62 components and 0.0829488 Jy ! Inverting map ! Added new window around map position (9.8, 9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500377 Jy ! Component: 100 - total flux cleaned = 0.0089373 Jy ! Component: 150 - total flux cleaned = 0.0125156 Jy ! Component: 200 - total flux cleaned = 0.0157862 Jy ! Total flux subtracted in 200 components = 0.0157862 Jy ! Clean residual min=-0.002956 max=0.003184 Jy/beam ! Clean residual mean=0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0987351 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 88 components and 0.0987351 Jy ! Inverting map ! Added new window around map position (12.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311344 Jy ! Component: 100 - total flux cleaned = 0.0055629 Jy ! Component: 150 - total flux cleaned = 0.00783135 Jy ! Component: 200 - total flux cleaned = 0.00952696 Jy ! Total flux subtracted in 200 components = 0.00952696 Jy ! Clean residual min=-0.002376 max=0.002531 Jy/beam ! Clean residual mean=0.000001 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.108262 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 105 components and 0.108262 Jy ! Inverting map ! Added new window around map position (25, -13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256866 Jy ! Component: 100 - total flux cleaned = 0.00405474 Jy ! Component: 150 - total flux cleaned = 0.00519524 Jy ! Component: 200 - total flux cleaned = 0.00635688 Jy ! Total flux subtracted in 200 components = 0.00635688 Jy ! Clean residual min=-0.002087 max=0.002102 Jy/beam ! Clean residual mean=0.000000 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.114619 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 127 components and 0.114619 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.948 mas, bmaj=2.145 mas, bpa=6.16 degrees ! Estimated noise=0.672609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132855 Jy ! Component: 100 - total flux cleaned = 0.00324883 Jy ! Component: 150 - total flux cleaned = 0.00505924 Jy ! Component: 200 - total flux cleaned = 0.00660248 Jy ! Total flux subtracted in 200 components = 0.00660248 Jy ! Clean residual min=-0.002320 max=0.002056 Jy/beam ! Clean residual mean=-0.000000 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.121221 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133137 Jy ! Component: 100 - total flux cleaned = 0.00236786 Jy ! Component: 150 - total flux cleaned = 0.00320318 Jy ! Component: 200 - total flux cleaned = 0.00370519 Jy ! Total flux subtracted in 200 components = 0.00370519 Jy ! Clean residual min=-0.002083 max=0.001730 Jy/beam ! Clean residual mean=-0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.124927 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 164 components and 0.124927 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8833 mas, bmaj=1.342 mas, bpa=-2.769 degrees ! Estimated noise=0.560646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223893 Jy ! Component: 100 - total flux cleaned = 0.000531676 Jy ! Component: 150 - total flux cleaned = 0.000818516 Jy ! Component: 200 - total flux cleaned = 0.00135344 Jy ! Total flux subtracted in 200 components = 0.00135344 Jy ! Clean residual min=-0.001711 max=0.001725 Jy/beam ! Clean residual mean=-0.000000 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.12628 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 186 components and 0.12628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060856Jy sigma=0.440665 ! Fit after self-cal, rms=0.060746Jy sigma=0.439137 wmodel J1317+4115_X_map.mod ! Writing 186 model components to file: J1317+4115_X_map.mod wobs J1317+4115_X_uvs.fits ! Writing UV FITS file: J1317+4115_X_uvs.fits wwins J1317+4115_X_map.win ! wwins: Wrote 16 windows to J1317+4115_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017853 Jy ! Component: 100 - total flux cleaned = -0.000315632 Jy ! Component: 150 - total flux cleaned = -0.000419793 Jy ! Component: 200 - total flux cleaned = -0.000444911 Jy ! Component: 250 - total flux cleaned = -0.000445293 Jy ! Component: 300 - total flux cleaned = -0.000492771 Jy ! Component: 350 - total flux cleaned = -0.000539376 Jy ! Component: 400 - total flux cleaned = -0.000630006 Jy ! Component: 450 - total flux cleaned = -0.000696285 Jy ! Component: 500 - total flux cleaned = -0.00076117 Jy ! Component: 550 - total flux cleaned = -0.000803823 Jy ! Component: 600 - total flux cleaned = -0.000824611 Jy ! Component: 650 - total flux cleaned = -0.000906387 Jy ! Component: 700 - total flux cleaned = -0.000947115 Jy ! Component: 750 - total flux cleaned = -0.00102732 Jy ! Component: 800 - total flux cleaned = -0.00118357 Jy ! Component: 850 - total flux cleaned = -0.00124087 Jy ! Component: 900 - total flux cleaned = -0.00131673 Jy ! Component: 950 - total flux cleaned = -0.00135399 Jy ! Component: 1000 - total flux cleaned = -0.00140901 Jy ! Component: 1050 - total flux cleaned = -0.00153552 Jy ! Component: 1100 - total flux cleaned = -0.0016064 Jy ! Component: 1150 - total flux cleaned = -0.0016763 Jy ! Component: 1200 - total flux cleaned = -0.00177974 Jy ! Component: 1250 - total flux cleaned = -0.00177963 Jy ! Component: 1300 - total flux cleaned = -0.00183058 Jy ! Component: 1350 - total flux cleaned = -0.00193065 Jy ! Component: 1400 - total flux cleaned = -0.00201303 Jy ! Component: 1450 - total flux cleaned = -0.00212624 Jy ! Component: 1500 - total flux cleaned = -0.00211035 Jy ! Component: 1550 - total flux cleaned = -0.00217382 Jy ! Component: 1600 - total flux cleaned = -0.00228311 Jy ! Component: 1650 - total flux cleaned = -0.00228294 Jy ! Component: 1700 - total flux cleaned = -0.00229858 Jy ! Component: 1750 - total flux cleaned = -0.00238943 Jy ! Component: 1800 - total flux cleaned = -0.00241937 Jy ! Component: 1850 - total flux cleaned = -0.00244909 Jy ! Component: 1900 - total flux cleaned = -0.00246369 Jy ! Component: 1950 - total flux cleaned = -0.00253634 Jy ! Component: 2000 - total flux cleaned = -0.00256506 Jy ! Component: 2050 - total flux cleaned = -0.00262201 Jy ! Component: 2100 - total flux cleaned = -0.00269257 Jy ! Component: 2150 - total flux cleaned = -0.00273432 Jy ! Component: 2200 - total flux cleaned = -0.0028036 Jy ! Component: 2250 - total flux cleaned = -0.0028994 Jy ! Component: 2300 - total flux cleaned = -0.00293985 Jy ! Component: 2350 - total flux cleaned = -0.00298011 Jy ! Component: 2400 - total flux cleaned = -0.00304688 Jy ! Component: 2450 - total flux cleaned = -0.00307331 Jy ! Component: 2500 - total flux cleaned = -0.00312608 Jy ! Component: 2550 - total flux cleaned = -0.00320404 Jy ! Component: 2600 - total flux cleaned = -0.00322986 Jy ! Component: 2650 - total flux cleaned = -0.00334491 Jy ! Component: 2700 - total flux cleaned = -0.00338305 Jy ! Component: 2750 - total flux cleaned = -0.00345843 Jy ! Component: 2800 - total flux cleaned = -0.0035207 Jy ! Component: 2850 - total flux cleaned = -0.00355784 Jy ! Component: 2900 - total flux cleaned = -0.00358257 Jy ! Component: 2950 - total flux cleaned = -0.00360699 Jy ! Component: 3000 - total flux cleaned = -0.00365533 Jy ! Component: 3050 - total flux cleaned = -0.0037152 Jy ! Component: 3100 - total flux cleaned = -0.00379841 Jy ! Component: 3150 - total flux cleaned = -0.00384567 Jy ! Component: 3200 - total flux cleaned = -0.00386887 Jy ! Component: 3250 - total flux cleaned = -0.00389224 Jy ! Component: 3300 - total flux cleaned = -0.00393829 Jy ! Component: 3350 - total flux cleaned = -0.00390407 Jy ! Component: 3400 - total flux cleaned = -0.00399507 Jy ! Component: 3450 - total flux cleaned = -0.00408534 Jy ! Component: 3500 - total flux cleaned = -0.00406295 Jy ! Component: 3550 - total flux cleaned = -0.00415209 Jy ! Component: 3600 - total flux cleaned = -0.0041521 Jy ! Component: 3650 - total flux cleaned = -0.00416315 Jy ! Component: 3700 - total flux cleaned = -0.00418499 Jy ! Component: 3750 - total flux cleaned = -0.00425001 Jy ! Component: 3800 - total flux cleaned = -0.0042715 Jy ! Component: 3850 - total flux cleaned = -0.00430344 Jy ! Component: 3900 - total flux cleaned = -0.00429289 Jy ! Component: 3950 - total flux cleaned = -0.00433505 Jy ! Component: 4000 - total flux cleaned = -0.00436634 Jy ! Component: 4050 - total flux cleaned = -0.00438711 Jy ! Total flux subtracted in 4096 components = -0.00433557 Jy ! Clean residual min=-0.000627 max=0.000577 Jy/beam ! Clean residual mean=-0.000000 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.121944 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 490 components and 0.121944 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1317+4115_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8833 x 1.342 at -2.769 degrees (North through East) ! Clean map min=-0.0024613 max=0.034282 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1317+4115_X_map.fits wmodel /image_prod/ug002_uva//J1317+4115_X_map.mod ! Writing 490 model components to file: /image_prod/ug002_uva//J1317+4115_X_map.mod wobs /image_prod/ug002_uva//J1317+4115_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1317+4115_X_uvs.fits wwins /image_prod/ug002_uva//J1317+4115_X_map.win ! wwins: Wrote 17 windows to /image_prod/ug002_uva//J1317+4115_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0342817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.56824 1.56824 3.13648 6.27296 12.5459 25.0918 50.1837 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 191.297 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1317+4115_X_dfm.log closed on Thu Mar 5 01:08:33 2020