! Started logfile: /image_prod/ug002_uva//J1316+7226_X_a_dfm.log on Thu Mar  5 01:08:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1316+7226_X_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1316+7226_X_a_uva.fits
! AN table 1: 120 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.902778 visibilities/baseline/integration-bin.
! Found source: J1316+7226
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 58500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1316+7226_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002971Jy  sigma=9.512186
! Fit after  self-cal, rms=0.950931Jy  sigma=9.007540
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7297 mas, bmaj=1.113 mas, bpa=78.86 degrees
! Estimated noise=0.788886 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0377367 Jy
! Component: 100  -  total flux cleaned = 0.0469631 Jy
! Total flux subtracted in 100 components = 0.0469631 Jy
! Clean residual min=-0.002366 max=0.003645 Jy/beam
! Clean residual mean=-0.000001 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.0469631 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0469631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055558Jy  sigma=0.490281
! Fit after  self-cal, rms=0.054433Jy  sigma=0.480018
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451601 Jy
! Component: 100  -  total flux cleaned = 0.00654906 Jy
! Total flux subtracted in 100 components = 0.00654906 Jy
! Clean residual min=-0.002136 max=0.002393 Jy/beam
! Clean residual mean=0.000000 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0535122 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0535122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053985Jy  sigma=0.474455
! Fit after  self-cal, rms=0.053992Jy  sigma=0.474415
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=1.446 mas, bpa=80.84 degrees
! Estimated noise=0.313462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024817 Jy
! Component: 100  -  total flux cleaned = 0.00390391 Jy
! Component: 150  -  total flux cleaned = 0.00450169 Jy
! Component: 200  -  total flux cleaned = 0.00501738 Jy
! Total flux subtracted in 200 components = 0.00501738 Jy
! Clean residual min=-0.001375 max=0.001892 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.0585295 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 38 components and 0.0585295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053865Jy  sigma=0.472996
! Fit after  self-cal, rms=0.053863Jy  sigma=0.472878
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 1.446 at 80.84 degrees (North through East)
! Clean map  min=-0.0013207  max=0.051511 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.00     MK        1.03     NL        1.15     OV        0.90     
!   PT        0.89     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.98     KP        1.03     
!   LA        1.01     MK        1.04     NL        1.20     OV        0.89     
!   PT        0.89     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.95     KP        1.03     
!   LA        1.02     MK        1.00     NL        1.18     OV        0.92     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.00     KP        1.01     
!   LA        1.00     MK        1.05     NL        1.15     OV        0.90     
!   PT        0.90     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.97     KP        1.03     
!   LA        0.98     MK        1.03     NL        1.13     OV        0.91     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.95     KP        1.03     
!   LA        0.99     MK        1.07     NL        1.17     OV        0.81     
!   PT        0.87     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.02     HN        1.00     KP        1.00     
!   LA        0.99     MK        0.95     NL        1.15     OV        0.91     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.95     KP        1.03     
!   LA        0.98     MK        1.08     NL        1.18     OV        0.87     
!   PT        0.90     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.94     KP        1.01     
!   LA        0.98     MK        1.04     NL        1.21     OV        0.89     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        0.99     KP        0.96     
!   LA        0.99     MK        1.07     NL        1.18     OV        0.92     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        0.95     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.16     OV        0.90     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        0.96     KP        1.05     
!   LA        1.03     MK        1.02     NL        1.14     OV        0.90     
!   PT        0.84     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.053863Jy  sigma=0.472878
! Fit after  self-cal, rms=0.052836Jy  sigma=0.469952
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.45 mas, bpa=80.74 degrees
! Estimated noise=0.309128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00042062 Jy
! Component: 100  -  total flux cleaned = 0.00025741 Jy
! Component: 150  -  total flux cleaned = 0.000115995 Jy
! Component: 200  -  total flux cleaned = -1.19163e-05 Jy
! Total flux subtracted in 200 components = -1.19163e-05 Jy
! Clean residual min=-0.000937 max=0.001041 Jy/beam
! Clean residual mean=-0.000000 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0585176 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 53 components and 0.0585176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052789Jy  sigma=0.469671
! Fit after  self-cal, rms=0.052832Jy  sigma=0.469486
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052832Jy  sigma=0.469486
! Fit after  self-cal, rms=0.057070Jy  sigma=0.467351
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=1.442 mas, bpa=80.4 degrees
! Estimated noise=0.31158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032114 Jy
! Component: 100  -  total flux cleaned = -0.000362249 Jy
! Component: 150  -  total flux cleaned = -0.000362734 Jy
! Component: 200  -  total flux cleaned = -0.000363239 Jy
! Total flux subtracted in 200 components = -0.000363239 Jy
! Clean residual min=-0.000614 max=0.000656 Jy/beam
! Clean residual mean=-0.000001 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0581544 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.0581544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057064Jy  sigma=0.467287
! Fit after  self-cal, rms=0.057148Jy  sigma=0.467144
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, 45.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000579645 Jy
! Component: 100  -  total flux cleaned = 0.000697075 Jy
! Component: 150  -  total flux cleaned = 0.000729309 Jy
! Component: 200  -  total flux cleaned = 0.000739595 Jy
! Total flux subtracted in 200 components = 0.000739595 Jy
! Clean residual min=-0.000622 max=0.000621 Jy/beam
! Clean residual mean=-0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.058894 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.058894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057139Jy  sigma=0.467084
! Fit after  self-cal, rms=0.057138Jy  sigma=0.467079
! Inverting map 
! Added new window around map position (12, 21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502123 Jy
! Component: 100  -  total flux cleaned = 0.000544992 Jy
! Component: 150  -  total flux cleaned = 0.000592997 Jy
! Component: 200  -  total flux cleaned = 0.000646845 Jy
! Total flux subtracted in 200 components = 0.000646845 Jy
! Clean residual min=-0.000617 max=0.000578 Jy/beam
! Clean residual mean=-0.000000 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0595408 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 97 components and 0.0595408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057129Jy  sigma=0.467003
! Fit after  self-cal, rms=0.057129Jy  sigma=0.466998
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057129Jy  sigma=0.466998
! Fit after  self-cal, rms=0.057645Jy  sigma=0.466969
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=1.439 mas, bpa=80.37 degrees
! Estimated noise=0.31075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.78697e-05 Jy
! Component: 100  -  total flux cleaned = 7.9968e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100507 Jy
! Component: 200  -  total flux cleaned = 0.000100446 Jy
! Total flux subtracted in 200 components = 0.000100446 Jy
! Clean residual min=-0.000593 max=0.000561 Jy/beam
! Clean residual mean=-0.000000 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0596413 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 0.0596413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057641Jy  sigma=0.466934
! Fit after  self-cal, rms=0.057649Jy  sigma=0.466931
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.8641e-05 Jy
! Component: 100  -  total flux cleaned = 3.79174e-05 Jy
! Component: 150  -  total flux cleaned = 2.93572e-05 Jy
! Component: 200  -  total flux cleaned = 3.79379e-05 Jy
! Total flux subtracted in 200 components = 3.79379e-05 Jy
! Clean residual min=-0.000591 max=0.000563 Jy/beam
! Clean residual mean=-0.000000 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0596792 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 108 components and 0.0596792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057646Jy  sigma=0.466911
! Fit after  self-cal, rms=0.057642Jy  sigma=0.466907
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057642Jy  sigma=0.466907
! Fit after  self-cal, rms=0.057705Jy  sigma=0.466904
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.305 mas, bmaj=2.809 mas, bpa=79.11 degrees
! Estimated noise=0.379873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214414 Jy
! Component: 100  -  total flux cleaned = 0.000247085 Jy
! Component: 150  -  total flux cleaned = 0.000257709 Jy
! Component: 200  -  total flux cleaned = 0.000270479 Jy
! Total flux subtracted in 200 components = 0.000270479 Jy
! Clean residual min=-0.000560 max=0.000580 Jy/beam
! Clean residual mean=-0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0599497 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 120 components and 0.0599497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057704Jy  sigma=0.466900
! Fit after  self-cal, rms=0.057704Jy  sigma=0.466898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.08887e-05 Jy
! Component: 100  -  total flux cleaned = 5.62489e-05 Jy
! Component: 150  -  total flux cleaned = 5.97747e-05 Jy
! Component: 200  -  total flux cleaned = 6.30573e-05 Jy
! Total flux subtracted in 200 components = 6.30573e-05 Jy
! Clean residual min=-0.000565 max=0.000582 Jy/beam
! Clean residual mean=-0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0600127 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.0600127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057704Jy  sigma=0.466897
! Fit after  self-cal, rms=0.057704Jy  sigma=0.466898
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=1.438 mas, bpa=80.34 degrees
! Estimated noise=0.310341 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 1.438 at 80.34 degrees (North through East)
! Clean map  min=-0.00054256  max=0.051033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7364 mas, bmaj=1.102 mas, bpa=78.28 degrees
! Estimated noise=0.782237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0382402 Jy
! Component: 100  -  total flux cleaned = 0.0476755 Jy
! Component: 150  -  total flux cleaned = 0.0514591 Jy
! Component: 200  -  total flux cleaned = 0.0532762 Jy
! Total flux subtracted in 200 components = 0.0532762 Jy
! Clean residual min=-0.001851 max=0.002077 Jy/beam
! Clean residual mean=-0.000001 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0532762 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0532762 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=1.438 mas, bpa=80.34 degrees
! Estimated noise=0.310341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208844 Jy
! Component: 100  -  total flux cleaned = 0.00319063 Jy
! Component: 150  -  total flux cleaned = 0.00402957 Jy
! Component: 200  -  total flux cleaned = 0.00469155 Jy
! Total flux subtracted in 200 components = 0.00469155 Jy
! Clean residual min=-0.000626 max=0.000629 Jy/beam
! Clean residual mean=-0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0579677 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 45 components and 0.0579677 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.305 mas, bmaj=2.809 mas, bpa=79.11 degrees
! Estimated noise=0.379873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077281 Jy
! Component: 100  -  total flux cleaned = 0.00124881 Jy
! Component: 150  -  total flux cleaned = 0.00148838 Jy
! Component: 200  -  total flux cleaned = 0.00160307 Jy
! Total flux subtracted in 200 components = 0.00160307 Jy
! Clean residual min=-0.000589 max=0.000586 Jy/beam
! Clean residual mean=-0.000002 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0595708 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.36717e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128619 Jy
! Component: 150  -  total flux cleaned = 0.000167878 Jy
! Component: 200  -  total flux cleaned = 0.000203346 Jy
! Total flux subtracted in 200 components = 0.000203346 Jy
! Clean residual min=-0.000576 max=0.000572 Jy/beam
! Clean residual mean=-0.000002 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.0597742 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 89 components and 0.0597741 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=1.438 mas, bpa=80.34 degrees
! Estimated noise=0.310341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.38444e-05 Jy
! Component: 100  -  total flux cleaned = 8.34777e-06 Jy
! Component: 150  -  total flux cleaned = -1.88923e-05 Jy
! Component: 200  -  total flux cleaned = -4.43049e-05 Jy
! Total flux subtracted in 200 components = -4.43049e-05 Jy
! Clean residual min=-0.000579 max=0.000579 Jy/beam
! Clean residual mean=-0.000001 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0597298 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 112 components and 0.0597298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057715Jy  sigma=0.466964
! Fit after  self-cal, rms=0.057713Jy  sigma=0.466947
wmodel J1316+7226_X_a_map.mod
! Writing 112 model components to file: J1316+7226_X_a_map.mod
wobs   J1316+7226_X_a_uvs.fits
! Writing UV FITS file: J1316+7226_X_a_uvs.fits
wwins  J1316+7226_X_a_map.win
! wwins: Wrote 5 windows to J1316+7226_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118614 Jy
! Component: 100  -  total flux cleaned = -0.000251733 Jy
! Component: 150  -  total flux cleaned = -0.000301061 Jy
! Component: 200  -  total flux cleaned = -0.000262389 Jy
! Component: 250  -  total flux cleaned = -0.000262353 Jy
! Component: 300  -  total flux cleaned = -0.000224927 Jy
! Component: 350  -  total flux cleaned = -0.000188246 Jy
! Component: 400  -  total flux cleaned = -0.00017022 Jy
! Component: 450  -  total flux cleaned = -0.000134763 Jy
! Component: 500  -  total flux cleaned = -9.9931e-05 Jy
! Component: 550  -  total flux cleaned = -6.5558e-05 Jy
! Component: 600  -  total flux cleaned = -4.8652e-05 Jy
! Component: 650  -  total flux cleaned = -3.18207e-05 Jy
! Component: 700  -  total flux cleaned = -3.17896e-05 Jy
! Component: 750  -  total flux cleaned = -7.03908e-06 Jy
! Component: 800  -  total flux cleaned = 1.73382e-05 Jy
! Component: 850  -  total flux cleaned = 3.34362e-05 Jy
! Component: 900  -  total flux cleaned = 4.13291e-05 Jy
! Component: 950  -  total flux cleaned = 4.92082e-05 Jy
! Component: 1000  -  total flux cleaned = 1.79215e-05 Jy
! Component: 1050  -  total flux cleaned = 4.11567e-05 Jy
! Component: 1100  -  total flux cleaned = 4.10567e-05 Jy
! Component: 1150  -  total flux cleaned = 2.59081e-05 Jy
! Component: 1200  -  total flux cleaned = 1.09321e-05 Jy
! Component: 1250  -  total flux cleaned = 3.51579e-06 Jy
! Component: 1300  -  total flux cleaned = 1.08794e-05 Jy
! Component: 1350  -  total flux cleaned = 3.51194e-06 Jy
! Component: 1400  -  total flux cleaned = 1.07965e-05 Jy
! Component: 1450  -  total flux cleaned = 3.44281e-06 Jy
! Component: 1500  -  total flux cleaned = -1.09877e-05 Jy
! Component: 1550  -  total flux cleaned = -1.08983e-05 Jy
! Component: 1600  -  total flux cleaned = -1.08985e-05 Jy
! Component: 1650  -  total flux cleaned = -3.90928e-05 Jy
! Component: 1700  -  total flux cleaned = -4.60806e-05 Jy
! Component: 1750  -  total flux cleaned = -3.91224e-05 Jy
! Component: 1800  -  total flux cleaned = -3.22478e-05 Jy
! Component: 1850  -  total flux cleaned = -5.28398e-05 Jy
! Component: 1900  -  total flux cleaned = -5.96583e-05 Jy
! Component: 1950  -  total flux cleaned = -5.28892e-05 Jy
! Component: 2000  -  total flux cleaned = -2.59103e-05 Jy
! Component: 2050  -  total flux cleaned = -4.60438e-05 Jy
! Component: 2100  -  total flux cleaned = -6.60471e-05 Jy
! Component: 2150  -  total flux cleaned = -5.26841e-05 Jy
! Component: 2200  -  total flux cleaned = -4.60908e-05 Jy
! Component: 2250  -  total flux cleaned = -1.97756e-05 Jy
! Component: 2300  -  total flux cleaned = -5.24375e-05 Jy
! Component: 2350  -  total flux cleaned = -5.23963e-05 Jy
! Component: 2400  -  total flux cleaned = -4.58995e-05 Jy
! Component: 2450  -  total flux cleaned = -3.30508e-05 Jy
! Component: 2500  -  total flux cleaned = -3.30168e-05 Jy
! Component: 2550  -  total flux cleaned = -6.49231e-05 Jy
! Component: 2600  -  total flux cleaned = -2.0439e-05 Jy
! Component: 2650  -  total flux cleaned = -2.04646e-05 Jy
! Component: 2700  -  total flux cleaned = -3.30482e-05 Jy
! Component: 2750  -  total flux cleaned = -1.42692e-05 Jy
! Component: 2800  -  total flux cleaned = -2.05252e-05 Jy
! Component: 2850  -  total flux cleaned = -2.67515e-05 Jy
! Component: 2900  -  total flux cleaned = -2.6705e-05 Jy
! Component: 2950  -  total flux cleaned = -4.51045e-05 Jy
! Component: 3000  -  total flux cleaned = -5.11885e-05 Jy
! Component: 3050  -  total flux cleaned = -4.50443e-05 Jy
! Component: 3100  -  total flux cleaned = -5.10881e-05 Jy
! Component: 3150  -  total flux cleaned = -3.29675e-05 Jy
! Component: 3200  -  total flux cleaned = -4.50458e-05 Jy
! Component: 3250  -  total flux cleaned = -3.90562e-05 Jy
! Component: 3300  -  total flux cleaned = -5.10089e-05 Jy
! Component: 3350  -  total flux cleaned = -5.69383e-05 Jy
! Component: 3400  -  total flux cleaned = -6.87339e-05 Jy
! Component: 3450  -  total flux cleaned = -5.69209e-05 Jy
! Component: 3500  -  total flux cleaned = -6.8643e-05 Jy
! Component: 3550  -  total flux cleaned = -8.03219e-05 Jy
! Component: 3600  -  total flux cleaned = -5.12645e-05 Jy
! Component: 3650  -  total flux cleaned = -7.44466e-05 Jy
! Component: 3700  -  total flux cleaned = -0.000114879 Jy
! Component: 3750  -  total flux cleaned = -9.75951e-05 Jy
! Component: 3800  -  total flux cleaned = -8.04118e-05 Jy
! Component: 3850  -  total flux cleaned = -0.000103212 Jy
! Component: 3900  -  total flux cleaned = -9.18609e-05 Jy
! Component: 3950  -  total flux cleaned = -0.000114519 Jy
! Component: 4000  -  total flux cleaned = -0.000103264 Jy
! Component: 4050  -  total flux cleaned = -0.000120125 Jy
! Total flux subtracted in 4096 components = -0.000125727 Jy
! Clean residual min=-0.000293 max=0.000318 Jy/beam
! Clean residual mean=0.000000 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.0596041 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 439 components and 0.0596041 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1316+7226_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 1.438 at 80.34 degrees (North through East)
! Clean map  min=-0.000528  max=0.051221 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1316+7226_X_a_map.fits
wmodel /image_prod/ug002_uva//J1316+7226_X_a_map.mod
! Writing 439 model components to file: /image_prod/ug002_uva//J1316+7226_X_a_map.mod
wobs   /image_prod/ug002_uva//J1316+7226_X_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1316+7226_X_a_uvs.fits
wwins  /image_prod/ug002_uva//J1316+7226_X_a_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1316+7226_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0512209 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.49621e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.556192 0.556192 1.11238 2.22477 4.44953 8.89907 17.7981 35.5963 71.1925
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.051 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  539.382 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1316+7226_X_a_dfm.log closed on Thu Mar  5 01:08:16 2020