! Started logfile: /image_prod/ug002_uva//J1313-2722_S_dfm.log on Thu Mar  5 01:06:58 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1313-2722_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1313-2722_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.784722 visibilities/baseline/integration-bin.
! Found source: J1313-2722
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5085 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1313-2722_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013550Jy  sigma=6.115129
! Fit after  self-cal, rms=0.890657Jy  sigma=5.470637
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.708 mas, bmaj=13.37 mas, bpa=-20.04 degrees
! Estimated noise=2.82406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.080437 Jy
! Component: 100  -  total flux cleaned = 0.100681 Jy
! Total flux subtracted in 100 components = 0.100681 Jy
! Clean residual min=-0.007882 max=0.008943 Jy/beam
! Clean residual mean=-0.000021 rms=0.002040 Jy/beam
! Combined flux in latest and established models = 0.100681 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.100681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115988Jy  sigma=0.463763
! Fit after  self-cal, rms=0.115977Jy  sigma=0.463603
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.425 mas, bmaj=14.56 mas, bpa=-19.78 degrees
! Estimated noise=1.74238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121257 Jy
! Component: 100  -  total flux cleaned = 0.0178469 Jy
! Component: 150  -  total flux cleaned = 0.0210034 Jy
! Component: 200  -  total flux cleaned = 0.0227576 Jy
! Total flux subtracted in 200 components = 0.0227576 Jy
! Clean residual min=-0.007518 max=0.005846 Jy/beam
! Clean residual mean=-0.000041 rms=0.001990 Jy/beam
! Combined flux in latest and established models = 0.123438 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 33 components and 0.123438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113666Jy  sigma=0.457614
! Fit after  self-cal, rms=0.113699Jy  sigma=0.457391
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.425 x 14.56 at -19.78 degrees (North through East)
! Clean map  min=-0.0073318  max=0.10501 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.16     KP        1.09     
!   LA        1.07     MK        0.99     NL        1.16     OV        1.06     
!   PT        0.63     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        0.96     HN        1.05     KP        1.07     
!   LA        1.07     MK        1.05     NL        1.06     OV        0.93     
!   PT        0.67     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        0.94     KP        1.10     
!   LA        1.11     MK        0.99     NL        1.10     OV        1.09     
!   PT        0.64     
! 
! 
! Fit before self-cal, rms=0.113699Jy  sigma=0.457391
! Fit after  self-cal, rms=0.095223Jy  sigma=0.442849
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.468 mas, bmaj=14.45 mas, bpa=-20 degrees
! Estimated noise=1.75184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00092713 Jy
! Component: 100  -  total flux cleaned = -0.000984473 Jy
! Component: 150  -  total flux cleaned = -0.00103422 Jy
! Component: 200  -  total flux cleaned = -0.00107682 Jy
! Total flux subtracted in 200 components = -0.00107682 Jy
! Clean residual min=-0.003916 max=0.004006 Jy/beam
! Clean residual mean=-0.000022 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.122362 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.122362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095126Jy  sigma=0.442433
! Fit after  self-cal, rms=0.095088Jy  sigma=0.442026
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095088Jy  sigma=0.442026
! Fit after  self-cal, rms=0.087362Jy  sigma=0.438247
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=14.51 mas, bpa=-20.03 degrees
! Estimated noise=1.74505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105138 Jy
! Component: 100  -  total flux cleaned = -0.00125905 Jy
! Component: 150  -  total flux cleaned = -0.00138006 Jy
! Component: 200  -  total flux cleaned = -0.00146079 Jy
! Total flux subtracted in 200 components = -0.00146079 Jy
! Clean residual min=-0.003343 max=0.003353 Jy/beam
! Clean residual mean=-0.000005 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 0.120901 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 59 components and 0.120901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087327Jy  sigma=0.438119
! Fit after  self-cal, rms=0.087348Jy  sigma=0.438015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150143 Jy
! Component: 100  -  total flux cleaned = -0.000221641 Jy
! Component: 150  -  total flux cleaned = -0.000287325 Jy
! Component: 200  -  total flux cleaned = -0.000346856 Jy
! Total flux subtracted in 200 components = -0.000346856 Jy
! Clean residual min=-0.003345 max=0.003322 Jy/beam
! Clean residual mean=-0.000006 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.120554 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.120554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087333Jy  sigma=0.437962
! Fit after  self-cal, rms=0.087326Jy  sigma=0.437957
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087326Jy  sigma=0.437957
! Fit after  self-cal, rms=0.087700Jy  sigma=0.437909
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.493 mas, bmaj=14.53 mas, bpa=-20.05 degrees
! Estimated noise=1.74356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000869202 Jy
! Component: 100  -  total flux cleaned = -0.00102291 Jy
! Component: 150  -  total flux cleaned = -0.00108945 Jy
! Component: 200  -  total flux cleaned = -0.00115049 Jy
! Total flux subtracted in 200 components = -0.00115049 Jy
! Clean residual min=-0.003357 max=0.003373 Jy/beam
! Clean residual mean=-0.000005 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.119403 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.119403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087682Jy  sigma=0.437844
! Fit after  self-cal, rms=0.087687Jy  sigma=0.437839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.07421e-05 Jy
! Component: 100  -  total flux cleaned = -0.000116838 Jy
! Component: 150  -  total flux cleaned = -0.0001682 Jy
! Component: 200  -  total flux cleaned = -0.000215329 Jy
! Total flux subtracted in 200 components = -0.000215329 Jy
! Clean residual min=-0.003350 max=0.003343 Jy/beam
! Clean residual mean=-0.000005 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.119188 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.119188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087679Jy  sigma=0.437809
! Fit after  self-cal, rms=0.087673Jy  sigma=0.437806
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087673Jy  sigma=0.437806
! Fit after  self-cal, rms=0.087978Jy  sigma=0.437780
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.367 mas, bmaj=22.53 mas, bpa=-7.718 degrees
! Estimated noise=2.08221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000917572 Jy
! Component: 100  -  total flux cleaned = -0.00104673 Jy
! Component: 150  -  total flux cleaned = -0.00111318 Jy
! Component: 200  -  total flux cleaned = -0.00116 Jy
! Total flux subtracted in 200 components = -0.00116 Jy
! Clean residual min=-0.004060 max=0.003684 Jy/beam
! Clean residual mean=-0.000006 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.118028 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 80 components and 0.118028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087973Jy  sigma=0.437800
! Fit after  self-cal, rms=0.087979Jy  sigma=0.437786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.35096e-05 Jy
! Component: 100  -  total flux cleaned = -0.000103421 Jy
! Component: 150  -  total flux cleaned = -0.000124647 Jy
! Component: 200  -  total flux cleaned = -0.00013466 Jy
! Total flux subtracted in 200 components = -0.00013466 Jy
! Clean residual min=-0.004046 max=0.003700 Jy/beam
! Clean residual mean=-0.000006 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.117893 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 83 components and 0.117893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087980Jy  sigma=0.437801
! Fit after  self-cal, rms=0.087979Jy  sigma=0.437797
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.5 mas, bmaj=14.54 mas, bpa=-20.07 degrees
! Estimated noise=1.7418 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.5 x 14.54 at -20.07 degrees (North through East)
! Clean map  min=-0.0033264  max=0.10568 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.752 mas, bmaj=13.25 mas, bpa=-20.44 degrees
! Estimated noise=2.89264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0822279 Jy
! Component: 100  -  total flux cleaned = 0.101672 Jy
! Component: 150  -  total flux cleaned = 0.109787 Jy
! Component: 200  -  total flux cleaned = 0.114274 Jy
! Total flux subtracted in 200 components = 0.114274 Jy
! Clean residual min=-0.005236 max=0.005180 Jy/beam
! Clean residual mean=-0.000010 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.114274 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.114274 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.5 mas, bmaj=14.54 mas, bpa=-20.07 degrees
! Estimated noise=1.7418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035316 Jy
! Component: 100  -  total flux cleaned = 0.00397212 Jy
! Component: 150  -  total flux cleaned = 0.00422344 Jy
! Component: 200  -  total flux cleaned = 0.00438084 Jy
! Total flux subtracted in 200 components = 0.00438084 Jy
! Clean residual min=-0.003477 max=0.003481 Jy/beam
! Clean residual mean=-0.000006 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.118655 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.118655 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.367 mas, bmaj=22.53 mas, bpa=-7.718 degrees
! Estimated noise=2.08221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163034 Jy
! Component: 100  -  total flux cleaned = 8.51109e-05 Jy
! Component: 150  -  total flux cleaned = 1.6937e-05 Jy
! Component: 200  -  total flux cleaned = -4.32058e-05 Jy
! Total flux subtracted in 200 components = -4.32058e-05 Jy
! Clean residual min=-0.004116 max=0.003699 Jy/beam
! Clean residual mean=-0.000010 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.118612 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.65996e-05 Jy
! Component: 100  -  total flux cleaned = -5.44848e-05 Jy
! Component: 150  -  total flux cleaned = -7.17435e-05 Jy
! Component: 200  -  total flux cleaned = -0.000104472 Jy
! Total flux subtracted in 200 components = -0.000104472 Jy
! Clean residual min=-0.004128 max=0.003700 Jy/beam
! Clean residual mean=-0.000009 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.118507 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.118507 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.5 mas, bmaj=14.54 mas, bpa=-20.07 degrees
! Estimated noise=1.7418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.63544e-06 Jy
! Component: 100  -  total flux cleaned = -5.45984e-06 Jy
! Component: 150  -  total flux cleaned = 2.21766e-05 Jy
! Component: 200  -  total flux cleaned = -2.47393e-05 Jy
! Total flux subtracted in 200 components = -2.47393e-05 Jy
! Clean residual min=-0.003443 max=0.003436 Jy/beam
! Clean residual mean=-0.000006 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.118483 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.118483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088023Jy  sigma=0.438005
! Fit after  self-cal, rms=0.087984Jy  sigma=0.437971
wmodel J1313-2722_S_map.mod
! Writing 60 model components to file: J1313-2722_S_map.mod
wobs   J1313-2722_S_uvs.fits
! Writing UV FITS file: J1313-2722_S_uvs.fits
wwins  J1313-2722_S_map.win
! wwins: Wrote 1 windows to J1313-2722_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185672 Jy
! Component: 100  -  total flux cleaned = 0.000353969 Jy
! Component: 150  -  total flux cleaned = 0.000355349 Jy
! Component: 200  -  total flux cleaned = 0.000501745 Jy
! Component: 250  -  total flux cleaned = 0.000773767 Jy
! Component: 300  -  total flux cleaned = 0.000859923 Jy
! Component: 350  -  total flux cleaned = 0.000696563 Jy
! Component: 400  -  total flux cleaned = 0.000618636 Jy
! Component: 450  -  total flux cleaned = 0.000429221 Jy
! Component: 500  -  total flux cleaned = 0.000247519 Jy
! Component: 550  -  total flux cleaned = 0.000140951 Jy
! Component: 600  -  total flux cleaned = 0.000140144 Jy
! Component: 650  -  total flux cleaned = 0.000140057 Jy
! Component: 700  -  total flux cleaned = 0.000140308 Jy
! Component: 750  -  total flux cleaned = 0.000109617 Jy
! Component: 800  -  total flux cleaned = 0.000109903 Jy
! Component: 850  -  total flux cleaned = 0.000109444 Jy
! Component: 900  -  total flux cleaned = 8.08218e-05 Jy
! Component: 950  -  total flux cleaned = 0.000137759 Jy
! Component: 1000  -  total flux cleaned = 8.257e-05 Jy
! Component: 1050  -  total flux cleaned = 0.000110236 Jy
! Component: 1100  -  total flux cleaned = 0.000162532 Jy
! Component: 1150  -  total flux cleaned = 8.44309e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000185526 Jy
! Component: 1250  -  total flux cleaned = 0.000160403 Jy
! Component: 1300  -  total flux cleaned = 0.000159951 Jy
! Component: 1350  -  total flux cleaned = 0.00011151 Jy
! Component: 1400  -  total flux cleaned = 4.12905e-05 Jy
! Component: 1450  -  total flux cleaned = -4.31965e-06 Jy
! Component: 1500  -  total flux cleaned = 4.09648e-05 Jy
! Component: 1550  -  total flux cleaned = -2.61293e-05 Jy
! Component: 1600  -  total flux cleaned = -3.80119e-06 Jy
! Component: 1650  -  total flux cleaned = -3.86555e-06 Jy
! Component: 1700  -  total flux cleaned = 3.86281e-05 Jy
! Component: 1750  -  total flux cleaned = 1.79302e-05 Jy
! Component: 1800  -  total flux cleaned = -2.27988e-06 Jy
! Component: 1850  -  total flux cleaned = 1.81161e-05 Jy
! Component: 1900  -  total flux cleaned = -2.18843e-05 Jy
! Component: 1950  -  total flux cleaned = -4.17831e-05 Jy
! Component: 2000  -  total flux cleaned = -0.000139243 Jy
! Component: 2050  -  total flux cleaned = -0.000196709 Jy
! Component: 2100  -  total flux cleaned = -0.000272725 Jy
! Component: 2150  -  total flux cleaned = -0.000310261 Jy
! Component: 2200  -  total flux cleaned = -0.000384312 Jy
! Component: 2250  -  total flux cleaned = -0.000366079 Jy
! Component: 2300  -  total flux cleaned = -0.000438888 Jy
! Component: 2350  -  total flux cleaned = -0.000438937 Jy
! Component: 2400  -  total flux cleaned = -0.000492409 Jy
! Component: 2450  -  total flux cleaned = -0.000509965 Jy
! Component: 2500  -  total flux cleaned = -0.000492633 Jy
! Component: 2550  -  total flux cleaned = -0.000527398 Jy
! Component: 2600  -  total flux cleaned = -0.000578857 Jy
! Component: 2650  -  total flux cleaned = -0.000561567 Jy
! Component: 2700  -  total flux cleaned = -0.000527993 Jy
! Component: 2750  -  total flux cleaned = -0.000578166 Jy
! Component: 2800  -  total flux cleaned = -0.000594636 Jy
! Component: 2850  -  total flux cleaned = -0.000594602 Jy
! Component: 2900  -  total flux cleaned = -0.000610875 Jy
! Component: 2950  -  total flux cleaned = -0.000675233 Jy
! Component: 3000  -  total flux cleaned = -0.000738681 Jy
! Component: 3050  -  total flux cleaned = -0.000754533 Jy
! Component: 3100  -  total flux cleaned = -0.000754623 Jy
! Component: 3150  -  total flux cleaned = -0.000801274 Jy
! Component: 3200  -  total flux cleaned = -0.00080143 Jy
! Component: 3250  -  total flux cleaned = -0.000816681 Jy
! Component: 3300  -  total flux cleaned = -0.00080148 Jy
! Component: 3350  -  total flux cleaned = -0.000801397 Jy
! Component: 3400  -  total flux cleaned = -0.00077111 Jy
! Component: 3450  -  total flux cleaned = -0.000786016 Jy
! Component: 3500  -  total flux cleaned = -0.000770938 Jy
! Component: 3550  -  total flux cleaned = -0.000770894 Jy
! Component: 3600  -  total flux cleaned = -0.000771024 Jy
! Component: 3650  -  total flux cleaned = -0.000756365 Jy
! Component: 3700  -  total flux cleaned = -0.000800125 Jy
! Component: 3750  -  total flux cleaned = -0.0007856 Jy
! Component: 3800  -  total flux cleaned = -0.000799867 Jy
! Component: 3850  -  total flux cleaned = -0.000799874 Jy
! Component: 3900  -  total flux cleaned = -0.000799849 Jy
! Component: 3950  -  total flux cleaned = -0.000785589 Jy
! Component: 4000  -  total flux cleaned = -0.000799671 Jy
! Component: 4050  -  total flux cleaned = -0.000757372 Jy
! Total flux subtracted in 4096 components = -0.000743456 Jy
! Clean residual min=-0.000777 max=0.000763 Jy/beam
! Clean residual mean=0.000001 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.117739 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 346 components and 0.117739 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1313-2722_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.5 x 14.54 at -20.07 degrees (North through East)
! Clean map  min=-0.002665  max=0.10621 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1313-2722_S_map.fits
wmodel /image_prod/ug002_uva//J1313-2722_S_map.mod
! Writing 346 model components to file: /image_prod/ug002_uva//J1313-2722_S_map.mod
wobs   /image_prod/ug002_uva//J1313-2722_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1313-2722_S_uvs.fits
wwins  /image_prod/ug002_uva//J1313-2722_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1313-2722_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106214 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000253319 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.7155 0.7155 1.431 2.862 5.724 11.448 22.896 45.792 91.584
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  419.287 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1313-2722_S_dfm.log closed on Thu Mar  5 01:07:02 2020