! Started logfile: /image_prod/ug002_uva//J1313+6735_S_dfm.log on Thu Mar  5 01:06:47 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1313+6735_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1313+6735_S_uva.fits
! AN table 1: 100 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.94 visibilities/baseline/integration-bin.
! Found source: J1313+6735
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10152 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1313+6735_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.112941Jy  sigma=7.866817
! Fit after  self-cal, rms=0.828891Jy  sigma=6.197822
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=3.575 mas, bpa=-47.46 degrees
! Estimated noise=1.62794 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142658 Jy
! Component: 100  -  total flux cleaned = 0.230262 Jy
! Total flux subtracted in 100 components = 0.230262 Jy
! Clean residual min=-0.035985 max=0.074333 Jy/beam
! Clean residual mean=-0.000467 rms=0.010209 Jy/beam
! Combined flux in latest and established models = 0.230262 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.230262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.352368Jy  sigma=2.189732
! Fit after  self-cal, rms=0.350826Jy  sigma=2.181734
! Inverting map 
! Added new window around map position (26, 17).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0796694 Jy
! Component: 100  -  total flux cleaned = 0.141059 Jy
! Total flux subtracted in 100 components = 0.141059 Jy
! Clean residual min=-0.032354 max=0.058422 Jy/beam
! Clean residual mean=-0.000408 rms=0.009041 Jy/beam
! Combined flux in latest and established models = 0.371321 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.371321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.307269Jy  sigma=1.923934
! Fit after  self-cal, rms=0.305696Jy  sigma=1.908023
! Inverting map 
! Added new window around map position (32, 21).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0656285 Jy
! Component: 100  -  total flux cleaned = 0.116822 Jy
! Total flux subtracted in 100 components = 0.116822 Jy
! Clean residual min=-0.026423 max=0.044564 Jy/beam
! Clean residual mean=-0.000361 rms=0.008032 Jy/beam
! Combined flux in latest and established models = 0.488143 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 106 components and 0.488143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.272410Jy  sigma=1.703206
! Fit after  self-cal, rms=0.271115Jy  sigma=1.694797
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.917 mas, bmaj=4.349 mas, bpa=-49.13 degrees
! Estimated noise=0.995002 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (26.5, 22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0928914 Jy
! Component: 100  -  total flux cleaned = 0.16797 Jy
! Component: 150  -  total flux cleaned = 0.23052 Jy
! Component: 200  -  total flux cleaned = 0.282972 Jy
! Total flux subtracted in 200 components = 0.282972 Jy
! Clean residual min=-0.032936 max=0.056909 Jy/beam
! Clean residual mean=-0.000489 rms=0.009681 Jy/beam
! Combined flux in latest and established models = 0.771115 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 160 components and 0.771115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.199597Jy  sigma=1.298734
! Fit after  self-cal, rms=0.197334Jy  sigma=1.285033
! Inverting map 
! Added new window around map position (7, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0609189 Jy
! Component: 100  -  total flux cleaned = 0.107619 Jy
! Component: 150  -  total flux cleaned = 0.147232 Jy
! Component: 200  -  total flux cleaned = 0.181622 Jy
! Total flux subtracted in 200 components = 0.181622 Jy
! Clean residual min=-0.027233 max=0.045609 Jy/beam
! Clean residual mean=-0.000279 rms=0.007517 Jy/beam
! Combined flux in latest and established models = 0.952737 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 214 components and 0.952737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.160179Jy  sigma=1.067511
! Fit after  self-cal, rms=0.157592Jy  sigma=1.048883
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.917 x 4.349 at -49.13 degrees (North through East)
! Clean map  min=-0.025783  max=0.19154 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.86     HN        1.05     KP        0.88     
!   LA        0.91     MK        1.12     OV        0.98     PT        0.88     
!   SC        1.30     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.96     HN        1.04     KP        0.87     
!   LA        0.98     MK        1.18     OV        1.05     PT        0.82     
!   SC        2.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.93     HN        1.08     KP        0.91     
!   LA        0.91     MK        1.33     OV        1.04     PT        0.85     
!   SC        1.39     
! 
! 
! Fit before self-cal, rms=0.157592Jy  sigma=1.048883
! Fit after  self-cal, rms=0.150573Jy  sigma=0.930107
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.233 mas, bmaj=4.694 mas, bpa=-45.97 degrees
! Estimated noise=1.0229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140709 Jy
! Component: 100  -  total flux cleaned = 0.0225998 Jy
! Component: 150  -  total flux cleaned = 0.028174 Jy
! Component: 200  -  total flux cleaned = 0.0325641 Jy
! Total flux subtracted in 200 components = 0.0325641 Jy
! Clean residual min=-0.022825 max=0.027014 Jy/beam
! Clean residual mean=0.000058 rms=0.005859 Jy/beam
! Combined flux in latest and established models = 0.985302 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 238 components and 0.985301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.144698Jy  sigma=0.891387
! Fit after  self-cal, rms=0.144709Jy  sigma=0.886392
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.144709Jy  sigma=0.886392
! Fit after  self-cal, rms=0.139636Jy  sigma=0.813112
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.294 mas, bmaj=4.509 mas, bpa=-76.96 degrees
! Estimated noise=1.02001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114333 Jy
! Component: 100  -  total flux cleaned = 0.0138291 Jy
! Component: 150  -  total flux cleaned = 0.016253 Jy
! Component: 200  -  total flux cleaned = 0.0183646 Jy
! Total flux subtracted in 200 components = 0.0183646 Jy
! Clean residual min=-0.018934 max=0.025694 Jy/beam
! Clean residual mean=-0.000247 rms=0.004908 Jy/beam
! Combined flux in latest and established models = 1.00367 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 254 components and 1.00367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136390Jy  sigma=0.793516
! Fit after  self-cal, rms=0.136187Jy  sigma=0.791113
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021309 Jy
! Component: 100  -  total flux cleaned = 0.0290746 Jy
! Component: 150  -  total flux cleaned = 0.0316063 Jy
! Component: 200  -  total flux cleaned = 0.0332309 Jy
! Total flux subtracted in 200 components = 0.0332309 Jy
! Clean residual min=-0.017308 max=0.022015 Jy/beam
! Clean residual mean=-0.000211 rms=0.004517 Jy/beam
! Combined flux in latest and established models = 1.0369 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 274 components and 1.0369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.131246Jy  sigma=0.764321
! Fit after  self-cal, rms=0.130724Jy  sigma=0.761109
! Inverting map 
! Added new window around map position (57, -13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01985 Jy
! Component: 100  -  total flux cleaned = 0.0275036 Jy
! Component: 150  -  total flux cleaned = 0.032414 Jy
! Component: 200  -  total flux cleaned = 0.0347872 Jy
! Total flux subtracted in 200 components = 0.0347872 Jy
! Clean residual min=-0.016195 max=0.021567 Jy/beam
! Clean residual mean=-0.000236 rms=0.004159 Jy/beam
! Combined flux in latest and established models = 1.07168 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 295 components and 1.07168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126510Jy  sigma=0.732463
! Fit after  self-cal, rms=0.126012Jy  sigma=0.730056
! Inverting map 
! Added new window around map position (9.5, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174698 Jy
! Component: 100  -  total flux cleaned = 0.0215783 Jy
! Component: 150  -  total flux cleaned = 0.0254571 Jy
! Component: 200  -  total flux cleaned = 0.028044 Jy
! Total flux subtracted in 200 components = 0.028044 Jy
! Clean residual min=-0.015723 max=0.015803 Jy/beam
! Clean residual mean=-0.000200 rms=0.003752 Jy/beam
! Combined flux in latest and established models = 1.09973 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 319 components and 1.09973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122300Jy  sigma=0.704281
! Fit after  self-cal, rms=0.121921Jy  sigma=0.701946
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121921Jy  sigma=0.701946
! Fit after  self-cal, rms=0.119550Jy  sigma=0.687560
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.29 mas, bmaj=4.543 mas, bpa=-88.1 degrees
! Estimated noise=1.01494 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126468 Jy
! Component: 100  -  total flux cleaned = 0.0195744 Jy
! Component: 150  -  total flux cleaned = 0.0252814 Jy
! Component: 200  -  total flux cleaned = 0.0306865 Jy
! Total flux subtracted in 200 components = 0.0306865 Jy
! Clean residual min=-0.012979 max=0.014528 Jy/beam
! Clean residual mean=-0.000204 rms=0.003439 Jy/beam
! Combined flux in latest and established models = 1.13041 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 337 components and 1.13041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117063Jy  sigma=0.670211
! Fit after  self-cal, rms=0.116836Jy  sigma=0.668831
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, 22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145558 Jy
! Component: 100  -  total flux cleaned = 0.0221741 Jy
! Component: 150  -  total flux cleaned = 0.0256375 Jy
! Component: 200  -  total flux cleaned = 0.027752 Jy
! Total flux subtracted in 200 components = 0.027752 Jy
! Clean residual min=-0.011955 max=0.012425 Jy/beam
! Clean residual mean=-0.000173 rms=0.003073 Jy/beam
! Combined flux in latest and established models = 1.15817 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 370 components and 1.15817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114383Jy  sigma=0.648485
! Fit after  self-cal, rms=0.114179Jy  sigma=0.647111
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114179Jy  sigma=0.647111
! Fit after  self-cal, rms=0.113924Jy  sigma=0.641488
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.827 mas, bmaj=9.801 mas, bpa=68.29 degrees
! Estimated noise=1.24638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153063 Jy
! Component: 100  -  total flux cleaned = 0.0257994 Jy
! Component: 150  -  total flux cleaned = 0.0342782 Jy
! Component: 200  -  total flux cleaned = 0.0389468 Jy
! Total flux subtracted in 200 components = 0.0389468 Jy
! Clean residual min=-0.013449 max=0.014169 Jy/beam
! Clean residual mean=-0.000328 rms=0.004232 Jy/beam
! Combined flux in latest and established models = 1.19711 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 404 components and 1.19711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112359Jy  sigma=0.630768
! Fit after  self-cal, rms=0.112175Jy  sigma=0.629557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00458088 Jy
! Component: 100  -  total flux cleaned = 0.00746324 Jy
! Component: 150  -  total flux cleaned = 0.0096167 Jy
! Component: 200  -  total flux cleaned = 0.0109264 Jy
! Total flux subtracted in 200 components = 0.0109264 Jy
! Clean residual min=-0.012837 max=0.013169 Jy/beam
! Clean residual mean=-0.000322 rms=0.004003 Jy/beam
! Combined flux in latest and established models = 1.20804 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 418 components and 1.20804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111746Jy  sigma=0.625544
! Fit after  self-cal, rms=0.111738Jy  sigma=0.625177
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.235 mas, bmaj=4.586 mas, bpa=87.07 degrees
! Estimated noise=1.0137 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.235 x 4.586 at 87.07 degrees (North through East)
! Clean map  min=-0.021508  max=0.1824 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.374 mas, bmaj=3.685 mas, bpa=-86.2 degrees
! Estimated noise=1.77742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15069 Jy
! Component: 100  -  total flux cleaned = 0.258228 Jy
! Component: 150  -  total flux cleaned = 0.34626 Jy
! Component: 200  -  total flux cleaned = 0.420584 Jy
! Total flux subtracted in 200 components = 0.420584 Jy
! Clean residual min=-0.034684 max=0.045812 Jy/beam
! Clean residual mean=-0.000439 rms=0.008558 Jy/beam
! Combined flux in latest and established models = 0.420584 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 69 model components to the UV plane model.
! The established model now contains 69 components and 0.420584 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.235 mas, bmaj=4.586 mas, bpa=87.07 degrees
! Estimated noise=1.0137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104551 Jy
! Component: 100  -  total flux cleaned = 0.187568 Jy
! Component: 150  -  total flux cleaned = 0.256001 Jy
! Component: 200  -  total flux cleaned = 0.31371 Jy
! Total flux subtracted in 200 components = 0.31371 Jy
! Clean residual min=-0.025653 max=0.042262 Jy/beam
! Clean residual mean=-0.000553 rms=0.007956 Jy/beam
! Combined flux in latest and established models = 0.734294 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 145 components and 0.734294 Jy
! Inverting map 
! Added new window around map position (0, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0502896 Jy
! Component: 100  -  total flux cleaned = 0.0926909 Jy
! Component: 150  -  total flux cleaned = 0.13007 Jy
! Component: 200  -  total flux cleaned = 0.163238 Jy
! Total flux subtracted in 200 components = 0.163238 Jy
! Clean residual min=-0.020316 max=0.026225 Jy/beam
! Clean residual mean=-0.000406 rms=0.005660 Jy/beam
! Combined flux in latest and established models = 0.897532 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 194 components and 0.897532 Jy
! Inverting map 
! Added new window around map position (-2, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311078 Jy
! Component: 100  -  total flux cleaned = 0.0583394 Jy
! Component: 150  -  total flux cleaned = 0.0829879 Jy
! Component: 200  -  total flux cleaned = 0.105368 Jy
! Total flux subtracted in 200 components = 0.105368 Jy
! Clean residual min=-0.016019 max=0.017062 Jy/beam
! Clean residual mean=-0.000314 rms=0.004336 Jy/beam
! Combined flux in latest and established models = 1.0029 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 246 components and 1.0029 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.827 mas, bmaj=9.801 mas, bpa=68.29 degrees
! Estimated noise=1.24638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365164 Jy
! Component: 100  -  total flux cleaned = 0.0653004 Jy
! Component: 150  -  total flux cleaned = 0.0894397 Jy
! Component: 200  -  total flux cleaned = 0.109991 Jy
! Total flux subtracted in 200 components = 0.109991 Jy
! Clean residual min=-0.016690 max=0.014134 Jy/beam
! Clean residual mean=-0.000443 rms=0.005058 Jy/beam
! Combined flux in latest and established models = 1.11289 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149296 Jy
! Component: 100  -  total flux cleaned = 0.0255263 Jy
! Component: 150  -  total flux cleaned = 0.0354886 Jy
! Component: 200  -  total flux cleaned = 0.0438481 Jy
! Total flux subtracted in 200 components = 0.0438481 Jy
! Clean residual min=-0.014349 max=0.012805 Jy/beam
! Clean residual mean=-0.000363 rms=0.004189 Jy/beam
! Combined flux in latest and established models = 1.15674 Jy
! Adding 185 model components to the UV plane model.
! The established model now contains 415 components and 1.15674 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.235 mas, bmaj=4.586 mas, bpa=87.07 degrees
! Estimated noise=1.0137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0092989 Jy
! Component: 100  -  total flux cleaned = 0.0159178 Jy
! Component: 150  -  total flux cleaned = 0.0211711 Jy
! Component: 200  -  total flux cleaned = 0.0259974 Jy
! Total flux subtracted in 200 components = 0.0259974 Jy
! Clean residual min=-0.011541 max=0.011336 Jy/beam
! Clean residual mean=-0.000159 rms=0.002693 Jy/beam
! Combined flux in latest and established models = 1.18274 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 448 components and 1.18274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112082Jy  sigma=0.625905
! Fit after  self-cal, rms=0.111047Jy  sigma=0.617145
wmodel J1313+6735_S_map.mod
! Writing 448 model components to file: J1313+6735_S_map.mod
wobs   J1313+6735_S_uvs.fits
! Writing UV FITS file: J1313+6735_S_uvs.fits
wwins  J1313+6735_S_map.win
! wwins: Wrote 11 windows to J1313+6735_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00334668 Jy
! Component: 100  -  total flux cleaned = -0.00403464 Jy
! Component: 150  -  total flux cleaned = -0.00501682 Jy
! Component: 200  -  total flux cleaned = -0.00564802 Jy
! Component: 250  -  total flux cleaned = -0.00625824 Jy
! Component: 300  -  total flux cleaned = -0.00714032 Jy
! Component: 350  -  total flux cleaned = -0.00742302 Jy
! Component: 400  -  total flux cleaned = -0.00714599 Jy
! Component: 450  -  total flux cleaned = -0.00741653 Jy
! Component: 500  -  total flux cleaned = -0.00728575 Jy
! Component: 550  -  total flux cleaned = -0.00780219 Jy
! Component: 600  -  total flux cleaned = -0.0079278 Jy
! Component: 650  -  total flux cleaned = -0.00817745 Jy
! Component: 700  -  total flux cleaned = -0.00914896 Jy
! Component: 750  -  total flux cleaned = -0.00938741 Jy
! Component: 800  -  total flux cleaned = -0.0100909 Jy
! Component: 850  -  total flux cleaned = -0.0105508 Jy
! Component: 900  -  total flux cleaned = -0.0110048 Jy
! Component: 950  -  total flux cleaned = -0.0111169 Jy
! Component: 1000  -  total flux cleaned = -0.011775 Jy
! Component: 1050  -  total flux cleaned = -0.0117761 Jy
! Component: 1100  -  total flux cleaned = -0.0118845 Jy
! Component: 1150  -  total flux cleaned = -0.0126144 Jy
! Component: 1200  -  total flux cleaned = -0.0125097 Jy
! Component: 1250  -  total flux cleaned = -0.0129142 Jy
! Component: 1300  -  total flux cleaned = -0.0129157 Jy
! Component: 1350  -  total flux cleaned = -0.0135076 Jy
! Component: 1400  -  total flux cleaned = -0.0135074 Jy
! Component: 1450  -  total flux cleaned = -0.0137005 Jy
! Component: 1500  -  total flux cleaned = -0.0138905 Jy
! Component: 1550  -  total flux cleaned = -0.0140777 Jy
! Component: 1600  -  total flux cleaned = -0.0143553 Jy
! Component: 1650  -  total flux cleaned = -0.014265 Jy
! Component: 1700  -  total flux cleaned = -0.014715 Jy
! Component: 1750  -  total flux cleaned = -0.0147143 Jy
! Component: 1800  -  total flux cleaned = -0.0149778 Jy
! Component: 1850  -  total flux cleaned = -0.0150636 Jy
! Component: 1900  -  total flux cleaned = -0.0151498 Jy
! Component: 1950  -  total flux cleaned = -0.0153196 Jy
! Component: 2000  -  total flux cleaned = -0.0152383 Jy
! Component: 2050  -  total flux cleaned = -0.0154048 Jy
! Component: 2100  -  total flux cleaned = -0.0154051 Jy
! Component: 2150  -  total flux cleaned = -0.0152438 Jy
! Component: 2200  -  total flux cleaned = -0.0153239 Jy
! Component: 2250  -  total flux cleaned = -0.0154035 Jy
! Component: 2300  -  total flux cleaned = -0.0154818 Jy
! Component: 2350  -  total flux cleaned = -0.0151724 Jy
! Component: 2400  -  total flux cleaned = -0.0152472 Jy
! Component: 2450  -  total flux cleaned = -0.0147963 Jy
! Component: 2500  -  total flux cleaned = -0.0147229 Jy
! Component: 2550  -  total flux cleaned = -0.0147969 Jy
! Component: 2600  -  total flux cleaned = -0.0150153 Jy
! Component: 2650  -  total flux cleaned = -0.0149425 Jy
! Component: 2700  -  total flux cleaned = -0.0147999 Jy
! Component: 2750  -  total flux cleaned = -0.0145888 Jy
! Component: 2800  -  total flux cleaned = -0.014937 Jy
! Component: 2850  -  total flux cleaned = -0.0148683 Jy
! Component: 2900  -  total flux cleaned = -0.0148011 Jy
! Component: 2950  -  total flux cleaned = -0.0150724 Jy
! Component: 3000  -  total flux cleaned = -0.0153415 Jy
! Component: 3050  -  total flux cleaned = -0.0150774 Jy
! Component: 3100  -  total flux cleaned = -0.015605 Jy
! Component: 3150  -  total flux cleaned = -0.0154089 Jy
! Component: 3200  -  total flux cleaned = -0.0158615 Jy
! Component: 3250  -  total flux cleaned = -0.0158609 Jy
! Component: 3300  -  total flux cleaned = -0.0160508 Jy
! Component: 3350  -  total flux cleaned = -0.0161759 Jy
! Component: 3400  -  total flux cleaned = -0.0164252 Jy
! Component: 3450  -  total flux cleaned = -0.0164251 Jy
! Component: 3500  -  total flux cleaned = -0.0164855 Jy
! Component: 3550  -  total flux cleaned = -0.0166675 Jy
! Component: 3600  -  total flux cleaned = -0.0167878 Jy
! Component: 3650  -  total flux cleaned = -0.0167893 Jy
! Component: 3700  -  total flux cleaned = -0.0172023 Jy
! Component: 3750  -  total flux cleaned = -0.0173193 Jy
! Component: 3800  -  total flux cleaned = -0.017783 Jy
! Component: 3850  -  total flux cleaned = -0.0178974 Jy
! Component: 3900  -  total flux cleaned = -0.0181833 Jy
! Component: 3950  -  total flux cleaned = -0.0181828 Jy
! Component: 4000  -  total flux cleaned = -0.018295 Jy
! Component: 4050  -  total flux cleaned = -0.0186838 Jy
! Total flux subtracted in 4096 components = -0.0189048 Jy
! Clean residual min=-0.003699 max=0.002952 Jy/beam
! Clean residual mean=-0.000090 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 1.16383 Jy
keep
! Adding 354 model components to the UV plane model.
! The established model now contains 799 components and 1.16383 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1313+6735_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.235 x 4.586 at 87.07 degrees (North through East)
! Clean map  min=-0.012644  max=0.1729 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1313+6735_S_map.fits
wmodel /image_prod/ug002_uva//J1313+6735_S_map.mod
! Writing 799 model components to file: /image_prod/ug002_uva//J1313+6735_S_map.mod
wobs   /image_prod/ug002_uva//J1313+6735_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1313+6735_S_uvs.fits
wwins  /image_prod/ug002_uva//J1313+6735_S_map.win
! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1313+6735_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.172901 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0010976 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.90445 1.90445 3.8089 7.6178 15.2356 30.4712 60.9424
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.172 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  157.525 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1313+6735_S_dfm.log closed on Thu Mar  5 01:06:51 2020