! Started logfile: /image_prod/ug002_uva//J1313+5458_X_dfm.log on Thu Mar 5 01:06:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1313+5458_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1313+5458_X_uva.fits ! AN table 1: 100 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.986111 visibilities/baseline/integration-bin. ! Found source: J1313+5458 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 42600 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1313+5458_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011162Jy sigma=9.611148 ! Fit after self-cal, rms=0.896461Jy sigma=8.519070 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8161 mas, bmaj=1.255 mas, bpa=-28.35 degrees ! Estimated noise=0.88829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0667408 Jy ! Component: 100 - total flux cleaned = 0.0938326 Jy ! Total flux subtracted in 100 components = 0.0938326 Jy ! Clean residual min=-0.005792 max=0.013494 Jy/beam ! Clean residual mean=-0.000033 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.0938326 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0938326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080945Jy sigma=0.723056 ! Fit after self-cal, rms=0.080686Jy sigma=0.720494 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169281 Jy ! Component: 100 - total flux cleaned = 0.0284638 Jy ! Total flux subtracted in 100 components = 0.0284638 Jy ! Clean residual min=-0.004703 max=0.010840 Jy/beam ! Clean residual mean=-0.000035 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.122296 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 0.122296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072725Jy sigma=0.640783 ! Fit after self-cal, rms=0.072698Jy sigma=0.640370 ! Inverting map ! Added new window around map position (1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109836 Jy ! Component: 100 - total flux cleaned = 0.0188366 Jy ! Total flux subtracted in 100 components = 0.0188366 Jy ! Clean residual min=-0.004155 max=0.007248 Jy/beam ! Clean residual mean=-0.000038 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.141133 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 66 components and 0.141133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068713Jy sigma=0.602085 ! Fit after self-cal, rms=0.068604Jy sigma=0.600711 ! Inverting map ! Added new window around map position (-23.8, -30.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782624 Jy ! Component: 100 - total flux cleaned = 0.0139537 Jy ! Total flux subtracted in 100 components = 0.0139537 Jy ! Clean residual min=-0.003751 max=0.005566 Jy/beam ! Clean residual mean=-0.000035 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.155087 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 83 components and 0.155087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066338Jy sigma=0.579119 ! Fit after self-cal, rms=0.066293Jy sigma=0.578500 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.123 mas, bmaj=1.553 mas, bpa=-25.87 degrees ! Estimated noise=0.366069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131179 Jy ! Component: 100 - total flux cleaned = 0.0230339 Jy ! Component: 150 - total flux cleaned = 0.0310455 Jy ! Component: 200 - total flux cleaned = 0.0376173 Jy ! Total flux subtracted in 200 components = 0.0376173 Jy ! Clean residual min=-0.004467 max=0.007063 Jy/beam ! Clean residual mean=-0.000094 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.192704 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 151 components and 0.192704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062200Jy sigma=0.540548 ! Fit after self-cal, rms=0.062093Jy sigma=0.539015 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.123 x 1.553 at -25.87 degrees (North through East) ! Clean map min=-0.0042655 max=0.096544 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.03 KP 1.05 ! LA 0.94 MK 1.03 NL 1.18 OV 0.96 ! PT 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.00 KP 1.05 ! LA 0.95 MK 0.99 NL 1.15 OV 0.94 ! PT 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.03 KP 1.05 ! LA 0.95 MK 1.02 NL 1.18 OV 0.94 ! PT 0.82 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.99 KP 1.06 ! LA 0.96 MK 1.05 NL 1.15 OV 0.95 ! PT 0.80 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 1.05 ! LA 0.93 MK 1.01 NL 1.21 OV 0.94 ! PT 0.82 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.02 KP 1.06 ! LA 0.95 MK 1.04 NL 1.19 OV 0.94 ! PT 0.82 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.98 KP 1.06 ! LA 0.94 MK 1.02 NL 1.21 OV 0.95 ! PT 0.81 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.98 KP 1.05 ! LA 0.97 MK 1.02 NL 1.20 OV 0.94 ! PT 0.82 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.03 KP 1.04 ! LA 0.97 MK 0.98 NL 1.16 OV 0.93 ! PT 0.82 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.00 KP 1.07 ! LA 0.94 MK 0.97 NL 1.22 OV 0.93 ! PT 0.82 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 0.94 KP 1.05 ! LA 0.94 MK 1.05 NL 1.20 OV 0.95 ! PT 0.84 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.00 KP 1.06 ! LA 0.95 MK 1.05 NL 1.18 OV 0.93 ! PT 0.82 ! ! ! Fit before self-cal, rms=0.062093Jy sigma=0.539015 ! Fit after self-cal, rms=0.056389Jy sigma=0.513729 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.144 mas, bmaj=1.573 mas, bpa=-25.68 degrees ! Estimated noise=0.355867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.4, -26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726841 Jy ! Component: 100 - total flux cleaned = 0.0119809 Jy ! Component: 150 - total flux cleaned = 0.0156576 Jy ! Component: 200 - total flux cleaned = 0.0186616 Jy ! Total flux subtracted in 200 components = 0.0186616 Jy ! Clean residual min=-0.002517 max=0.003172 Jy/beam ! Clean residual mean=-0.000049 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.211366 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 213 components and 0.211366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055283Jy sigma=0.500764 ! Fit after self-cal, rms=0.055247Jy sigma=0.499616 ! Inverting map ! Added new window around map position (-24.8, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363548 Jy ! Component: 100 - total flux cleaned = 0.00630724 Jy ! Component: 150 - total flux cleaned = 0.00828191 Jy ! Component: 200 - total flux cleaned = 0.009608 Jy ! Total flux subtracted in 200 components = 0.009608 Jy ! Clean residual min=-0.002216 max=0.002650 Jy/beam ! Clean residual mean=-0.000033 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.220974 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 253 components and 0.220974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054907Jy sigma=0.495761 ! Fit after self-cal, rms=0.054882Jy sigma=0.495440 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054882Jy sigma=0.495440 ! Fit after self-cal, rms=0.055666Jy sigma=0.490199 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.141 mas, bmaj=1.572 mas, bpa=-25.56 degrees ! Estimated noise=0.357121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019926 Jy ! Component: 100 - total flux cleaned = 0.00332518 Jy ! Component: 150 - total flux cleaned = 0.00422824 Jy ! Component: 200 - total flux cleaned = 0.00488677 Jy ! Total flux subtracted in 200 components = 0.00488677 Jy ! Clean residual min=-0.001492 max=0.002319 Jy/beam ! Clean residual mean=-0.000007 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.22586 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 293 components and 0.225861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055561Jy sigma=0.489021 ! Fit after self-cal, rms=0.055584Jy sigma=0.488861 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.6, -31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234258 Jy ! Component: 100 - total flux cleaned = 0.00355517 Jy ! Component: 150 - total flux cleaned = 0.00434594 Jy ! Component: 200 - total flux cleaned = 0.00492835 Jy ! Total flux subtracted in 200 components = 0.00492835 Jy ! Clean residual min=-0.001300 max=0.001681 Jy/beam ! Clean residual mean=0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.230789 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 341 components and 0.230789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055472Jy sigma=0.487553 ! Fit after self-cal, rms=0.055462Jy sigma=0.487450 ! Inverting map ! Added new window around map position (6.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155678 Jy ! Component: 100 - total flux cleaned = 0.00227145 Jy ! Component: 150 - total flux cleaned = 0.00279001 Jy ! Component: 200 - total flux cleaned = 0.00325551 Jy ! Total flux subtracted in 200 components = 0.00325551 Jy ! Clean residual min=-0.001311 max=0.001472 Jy/beam ! Clean residual mean=0.000006 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.234044 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 363 components and 0.234044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055405Jy sigma=0.486813 ! Fit after self-cal, rms=0.055400Jy sigma=0.486778 ! Inverting map ! Added new window around map position (2.4, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154112 Jy ! Component: 100 - total flux cleaned = 0.00249515 Jy ! Component: 150 - total flux cleaned = 0.00329939 Jy ! Component: 200 - total flux cleaned = 0.00387716 Jy ! Total flux subtracted in 200 components = 0.00387716 Jy ! Clean residual min=-0.001241 max=0.001236 Jy/beam ! Clean residual mean=0.000005 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.237922 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 392 components and 0.237922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055347Jy sigma=0.486190 ! Fit after self-cal, rms=0.055342Jy sigma=0.486156 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055342Jy sigma=0.486156 ! Fit after self-cal, rms=0.055371Jy sigma=0.485737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.139 mas, bmaj=1.573 mas, bpa=-25.52 degrees ! Estimated noise=0.35649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001096 Jy ! Component: 100 - total flux cleaned = 0.00197861 Jy ! Component: 150 - total flux cleaned = 0.00268019 Jy ! Component: 200 - total flux cleaned = 0.00329923 Jy ! Total flux subtracted in 200 components = 0.00329923 Jy ! Clean residual min=-0.001072 max=0.001180 Jy/beam ! Clean residual mean=-0.000000 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.241221 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 421 components and 0.241221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055335Jy sigma=0.485309 ! Fit after self-cal, rms=0.055336Jy sigma=0.485294 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000990576 Jy ! Component: 100 - total flux cleaned = 0.00159635 Jy ! Component: 150 - total flux cleaned = 0.00212532 Jy ! Component: 200 - total flux cleaned = 0.00262097 Jy ! Total flux subtracted in 200 components = 0.00262097 Jy ! Clean residual min=-0.001029 max=0.001090 Jy/beam ! Clean residual mean=0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.243842 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 446 components and 0.243842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055302Jy sigma=0.484940 ! Fit after self-cal, rms=0.055299Jy sigma=0.484922 ! Inverting map ! Added new window around map position (18.4, -50.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776784 Jy ! Component: 100 - total flux cleaned = 0.00109355 Jy ! Component: 150 - total flux cleaned = 0.00145937 Jy ! Component: 200 - total flux cleaned = 0.00175765 Jy ! Total flux subtracted in 200 components = 0.00175765 Jy ! Clean residual min=-0.000977 max=0.000910 Jy/beam ! Clean residual mean=0.000003 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.245599 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 465 components and 0.245599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055273Jy sigma=0.484656 ! Fit after self-cal, rms=0.055272Jy sigma=0.484646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055272Jy sigma=0.484646 ! Fit after self-cal, rms=0.055143Jy sigma=0.484533 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=2.546 mas, bpa=30.55 degrees ! Estimated noise=0.424015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123302 Jy ! Component: 100 - total flux cleaned = 0.00222762 Jy ! Component: 150 - total flux cleaned = 0.00308738 Jy ! Component: 200 - total flux cleaned = 0.00384763 Jy ! Total flux subtracted in 200 components = 0.00384763 Jy ! Clean residual min=-0.000994 max=0.000986 Jy/beam ! Clean residual mean=0.000005 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.249447 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 508 components and 0.249447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055123Jy sigma=0.484281 ! Fit after self-cal, rms=0.055122Jy sigma=0.484261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766942 Jy ! Component: 100 - total flux cleaned = 0.00141305 Jy ! Component: 150 - total flux cleaned = 0.00198734 Jy ! Component: 200 - total flux cleaned = 0.00234029 Jy ! Total flux subtracted in 200 components = 0.00234029 Jy ! Clean residual min=-0.000946 max=0.000951 Jy/beam ! Clean residual mean=0.000008 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.251787 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 535 components and 0.251787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055114Jy sigma=0.484168 ! Fit after self-cal, rms=0.055114Jy sigma=0.484161 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.139 mas, bmaj=1.573 mas, bpa=-25.7 degrees ! Estimated noise=0.356186 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.139 x 1.573 at -25.7 degrees (North through East) ! Clean map min=-0.00082462 max=0.093311 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8261 mas, bmaj=1.267 mas, bpa=-27.92 degrees ! Estimated noise=0.87976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655916 Jy ! Component: 100 - total flux cleaned = 0.0925959 Jy ! Component: 150 - total flux cleaned = 0.109688 Jy ! Component: 200 - total flux cleaned = 0.122197 Jy ! Total flux subtracted in 200 components = 0.122197 Jy ! Clean residual min=-0.003787 max=0.007381 Jy/beam ! Clean residual mean=-0.000032 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.122197 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.122197 Jy ! Inverting map and beam ! Estimated beam: bmin=1.139 mas, bmaj=1.573 mas, bpa=-25.7 degrees ! Estimated noise=0.356186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190417 Jy ! Component: 100 - total flux cleaned = 0.0324984 Jy ! Component: 150 - total flux cleaned = 0.0431506 Jy ! Component: 200 - total flux cleaned = 0.0520088 Jy ! Total flux subtracted in 200 components = 0.0520088 Jy ! Clean residual min=-0.003482 max=0.005430 Jy/beam ! Clean residual mean=-0.000067 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.174206 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 128 components and 0.174206 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075223 Jy ! Component: 100 - total flux cleaned = 0.0139827 Jy ! Component: 150 - total flux cleaned = 0.0195744 Jy ! Component: 200 - total flux cleaned = 0.0244527 Jy ! Total flux subtracted in 200 components = 0.0244527 Jy ! Clean residual min=-0.002280 max=0.003054 Jy/beam ! Clean residual mean=-0.000041 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.198659 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 216 components and 0.198659 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429941 Jy ! Component: 100 - total flux cleaned = 0.00811759 Jy ! Component: 150 - total flux cleaned = 0.0115408 Jy ! Component: 200 - total flux cleaned = 0.0146255 Jy ! Total flux subtracted in 200 components = 0.0146255 Jy ! Clean residual min=-0.001721 max=0.001960 Jy/beam ! Clean residual mean=-0.000026 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.213284 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 284 components and 0.213284 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=2.546 mas, bpa=30.55 degrees ! Estimated noise=0.424015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504479 Jy ! Component: 100 - total flux cleaned = 0.00914104 Jy ! Component: 150 - total flux cleaned = 0.0125992 Jy ! Component: 200 - total flux cleaned = 0.0156025 Jy ! Total flux subtracted in 200 components = 0.0156025 Jy ! Clean residual min=-0.001935 max=0.001915 Jy/beam ! Clean residual mean=-0.000021 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.228887 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263293 Jy ! Component: 100 - total flux cleaned = 0.00496037 Jy ! Component: 150 - total flux cleaned = 0.00703243 Jy ! Component: 200 - total flux cleaned = 0.00888365 Jy ! Total flux subtracted in 200 components = 0.00888365 Jy ! Clean residual min=-0.001430 max=0.001437 Jy/beam ! Clean residual mean=-0.000008 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.23777 Jy ! Adding 209 model components to the UV plane model. ! The established model now contains 451 components and 0.23777 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.139 mas, bmaj=1.573 mas, bpa=-25.7 degrees ! Estimated noise=0.356186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122866 Jy ! Component: 100 - total flux cleaned = 0.00231456 Jy ! Component: 150 - total flux cleaned = 0.00331506 Jy ! Component: 200 - total flux cleaned = 0.00424629 Jy ! Total flux subtracted in 200 components = 0.00424629 Jy ! Clean residual min=-0.000995 max=0.000986 Jy/beam ! Clean residual mean=-0.000003 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.242017 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 496 components and 0.242017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055166Jy sigma=0.484751 ! Fit after self-cal, rms=0.055153Jy sigma=0.484614 wmodel J1313+5458_X_map.mod ! Writing 496 model components to file: J1313+5458_X_map.mod wobs J1313+5458_X_uvs.fits ! Writing UV FITS file: J1313+5458_X_uvs.fits wwins J1313+5458_X_map.win ! wwins: Wrote 11 windows to J1313+5458_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129486 Jy ! Component: 100 - total flux cleaned = -0.000194785 Jy ! Component: 150 - total flux cleaned = -0.000241986 Jy ! Component: 200 - total flux cleaned = -0.000256733 Jy ! Component: 250 - total flux cleaned = -0.000256771 Jy ! Component: 300 - total flux cleaned = -0.000271036 Jy ! Component: 350 - total flux cleaned = -0.000299047 Jy ! Component: 400 - total flux cleaned = -0.00029898 Jy ! Component: 450 - total flux cleaned = -0.000312273 Jy ! Component: 500 - total flux cleaned = -0.000298986 Jy ! Component: 550 - total flux cleaned = -0.000272923 Jy ! Component: 600 - total flux cleaned = -0.000196334 Jy ! Component: 650 - total flux cleaned = -0.00018394 Jy ! Component: 700 - total flux cleaned = -0.000171513 Jy ! Component: 750 - total flux cleaned = -0.000183704 Jy ! Component: 800 - total flux cleaned = -0.000195596 Jy ! Component: 850 - total flux cleaned = -0.00014798 Jy ! Component: 900 - total flux cleaned = -0.000206887 Jy ! Component: 950 - total flux cleaned = -0.000160169 Jy ! Component: 1000 - total flux cleaned = -0.000183321 Jy ! Component: 1050 - total flux cleaned = -0.000171706 Jy ! Component: 1100 - total flux cleaned = -0.000160466 Jy ! Component: 1150 - total flux cleaned = -0.000160478 Jy ! Component: 1200 - total flux cleaned = -0.000193298 Jy ! Component: 1250 - total flux cleaned = -0.000127689 Jy ! Component: 1300 - total flux cleaned = -0.000116926 Jy ! Component: 1350 - total flux cleaned = -7.4435e-05 Jy ! Component: 1400 - total flux cleaned = -7.4515e-05 Jy ! Component: 1450 - total flux cleaned = -5.36543e-05 Jy ! Component: 1500 - total flux cleaned = -6.40682e-05 Jy ! Component: 1550 - total flux cleaned = -6.41539e-05 Jy ! Component: 1600 - total flux cleaned = -1.33729e-05 Jy ! Component: 1650 - total flux cleaned = -5.36055e-05 Jy ! Component: 1700 - total flux cleaned = -6.36158e-05 Jy ! Component: 1750 - total flux cleaned = -4.38154e-05 Jy ! Component: 1800 - total flux cleaned = -2.42541e-05 Jy ! Component: 1850 - total flux cleaned = -4.35809e-05 Jy ! Component: 1900 - total flux cleaned = 4.4655e-06 Jy ! Component: 1950 - total flux cleaned = 4.24251e-05 Jy ! Component: 2000 - total flux cleaned = 6.13473e-05 Jy ! Component: 2050 - total flux cleaned = 5.21674e-05 Jy ! Component: 2100 - total flux cleaned = 9.84859e-05 Jy ! Component: 2150 - total flux cleaned = 7.08728e-05 Jy ! Component: 2200 - total flux cleaned = 9.83639e-05 Jy ! Component: 2250 - total flux cleaned = 8.93307e-05 Jy ! Component: 2300 - total flux cleaned = 0.000134294 Jy ! Component: 2350 - total flux cleaned = 0.000196671 Jy ! Component: 2400 - total flux cleaned = 0.000196528 Jy ! Component: 2450 - total flux cleaned = 0.000205183 Jy ! Component: 2500 - total flux cleaned = 0.000231208 Jy ! Component: 2550 - total flux cleaned = 0.000222428 Jy ! Component: 2600 - total flux cleaned = 0.000248046 Jy ! Component: 2650 - total flux cleaned = 0.000256648 Jy ! Component: 2700 - total flux cleaned = 0.000239697 Jy ! Component: 2750 - total flux cleaned = 0.000264903 Jy ! Component: 2800 - total flux cleaned = 0.000289874 Jy ! Component: 2850 - total flux cleaned = 0.000314536 Jy ! Component: 2900 - total flux cleaned = 0.000306362 Jy ! Component: 2950 - total flux cleaned = 0.00031443 Jy ! Component: 3000 - total flux cleaned = 0.000338633 Jy ! Component: 3050 - total flux cleaned = 0.000362721 Jy ! Component: 3100 - total flux cleaned = 0.00033893 Jy ! Component: 3150 - total flux cleaned = 0.000378341 Jy ! Component: 3200 - total flux cleaned = 0.000394106 Jy ! Component: 3250 - total flux cleaned = 0.000378395 Jy ! Component: 3300 - total flux cleaned = 0.000394032 Jy ! Component: 3350 - total flux cleaned = 0.000424759 Jy ! Component: 3400 - total flux cleaned = 0.000432354 Jy ! Component: 3450 - total flux cleaned = 0.000447519 Jy ! Component: 3500 - total flux cleaned = 0.000455034 Jy ! Component: 3550 - total flux cleaned = 0.000469988 Jy ! Component: 3600 - total flux cleaned = 0.000484838 Jy ! Component: 3650 - total flux cleaned = 0.000521761 Jy ! Component: 3700 - total flux cleaned = 0.000485 Jy ! Component: 3750 - total flux cleaned = 0.000499531 Jy ! Component: 3800 - total flux cleaned = 0.000521359 Jy ! Component: 3850 - total flux cleaned = 0.000514089 Jy ! Component: 3900 - total flux cleaned = 0.000528453 Jy ! Component: 3950 - total flux cleaned = 0.000542729 Jy ! Component: 4000 - total flux cleaned = 0.000535612 Jy ! Component: 4050 - total flux cleaned = 0.000528557 Jy ! Total flux subtracted in 4096 components = 0.000549638 Jy ! Clean residual min=-0.000434 max=0.000367 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.242566 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 848 components and 0.242566 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1313+5458_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.139 x 1.573 at -25.7 degrees (North through East) ! Clean map min=-0.00069754 max=0.093492 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1313+5458_X_map.fits wmodel /image_prod/ug002_uva//J1313+5458_X_map.mod ! Writing 848 model components to file: /image_prod/ug002_uva//J1313+5458_X_map.mod wobs /image_prod/ug002_uva//J1313+5458_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1313+5458_X_uvs.fits wwins /image_prod/ug002_uva//J1313+5458_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1313+5458_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0934917 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127205 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.408179 0.408179 0.816359 1.63272 3.26543 6.53087 13.0617 26.1235 52.2469 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.093 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 734.971 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1313+5458_X_dfm.log closed on Thu Mar 5 01:06:46 2020