! Started logfile: /image_prod/ug002_uva//J1312-0424_S_dfm.log on Thu Mar  5 01:06:22 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1312-0424_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1312-0424_S_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.979259 visibilities/baseline/integration-bin.
! Found source: J1312-0424
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9915 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1312-0424_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.049207Jy  sigma=7.715587
! Fit after  self-cal, rms=0.699457Jy  sigma=5.197833
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=7.134 mas, bpa=-4.345 degrees
! Estimated noise=1.42602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.237834 Jy
! Component: 100  -  total flux cleaned = 0.289698 Jy
! Total flux subtracted in 100 components = 0.289698 Jy
! Clean residual min=-0.011618 max=0.014951 Jy/beam
! Clean residual mean=-0.000007 rms=0.002948 Jy/beam
! Combined flux in latest and established models = 0.289698 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.289698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110706Jy  sigma=0.609987
! Fit after  self-cal, rms=0.110700Jy  sigma=0.609961
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.317 mas, bmaj=8.307 mas, bpa=-5.07 degrees
! Estimated noise=0.997985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015558 Jy
! Component: 100  -  total flux cleaned = 0.0200468 Jy
! Component: 150  -  total flux cleaned = 0.0212223 Jy
! Component: 200  -  total flux cleaned = 0.0214684 Jy
! Total flux subtracted in 200 components = 0.0214684 Jy
! Clean residual min=-0.010673 max=0.011683 Jy/beam
! Clean residual mean=-0.000017 rms=0.002718 Jy/beam
! Combined flux in latest and established models = 0.311166 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 19 components and 0.311166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107888Jy  sigma=0.585375
! Fit after  self-cal, rms=0.107795Jy  sigma=0.584024
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.317 x 8.307 at -5.07 degrees (North through East)
! Clean map  min=-0.010272  max=0.29478 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.98     HN        1.01     KP        0.97     
!   LA        1.00     MK        1.00     NL        0.97     OV        0.98     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.99     HN        1.02     KP        0.94     
!   LA        1.00     MK        0.97     NL        1.09     OV        1.00     
!   PT        1.01     SC        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        1.00     HN        1.03     KP        0.93     
!   LA        1.02     MK        0.98     NL        1.00     OV        1.07     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.107795Jy  sigma=0.584024
! Fit after  self-cal, rms=0.116795Jy  sigma=0.564802
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.277 mas, bmaj=8.28 mas, bpa=-4.713 degrees
! Estimated noise=1.00226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329625 Jy
! Component: 100  -  total flux cleaned = 0.00113562 Jy
! Component: 150  -  total flux cleaned = 0.00154937 Jy
! Component: 200  -  total flux cleaned = 0.00179933 Jy
! Total flux subtracted in 200 components = 0.00179933 Jy
! Clean residual min=-0.010954 max=0.009646 Jy/beam
! Clean residual mean=-0.000018 rms=0.002518 Jy/beam
! Combined flux in latest and established models = 0.312965 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 0.312965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115716Jy  sigma=0.564149
! Fit after  self-cal, rms=0.115735Jy  sigma=0.563991
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115735Jy  sigma=0.563991
! Fit after  self-cal, rms=0.098859Jy  sigma=0.488658
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=8.324 mas, bpa=-5.052 degrees
! Estimated noise=1.01907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000627549 Jy
! Component: 100  -  total flux cleaned = 0.000176111 Jy
! Component: 150  -  total flux cleaned = -2.09807e-05 Jy
! Component: 200  -  total flux cleaned = -0.000187581 Jy
! Total flux subtracted in 200 components = -0.000187581 Jy
! Clean residual min=-0.005003 max=0.004839 Jy/beam
! Clean residual mean=-0.000012 rms=0.001289 Jy/beam
! Combined flux in latest and established models = 0.312778 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.312778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097555Jy  sigma=0.483799
! Fit after  self-cal, rms=0.097624Jy  sigma=0.483483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036995 Jy
! Component: 100  -  total flux cleaned = -8.93912e-05 Jy
! Component: 150  -  total flux cleaned = 3.84873e-05 Jy
! Component: 200  -  total flux cleaned = 0.000156062 Jy
! Total flux subtracted in 200 components = 0.000156062 Jy
! Clean residual min=-0.004719 max=0.004660 Jy/beam
! Clean residual mean=-0.000012 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.312934 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.312934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097133Jy  sigma=0.481560
! Fit after  self-cal, rms=0.097122Jy  sigma=0.481522
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097122Jy  sigma=0.481522
! Fit after  self-cal, rms=0.091468Jy  sigma=0.455634
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.275 mas, bmaj=8.278 mas, bpa=-4.905 degrees
! Estimated noise=1.01326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176341 Jy
! Component: 100  -  total flux cleaned = 0.000179243 Jy
! Component: 150  -  total flux cleaned = 9.5064e-06 Jy
! Component: 200  -  total flux cleaned = -0.000277748 Jy
! Total flux subtracted in 200 components = -0.000277748 Jy
! Clean residual min=-0.002239 max=0.001817 Jy/beam
! Clean residual mean=-0.000000 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.312656 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 73 components and 0.312656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091354Jy  sigma=0.454818
! Fit after  self-cal, rms=0.091327Jy  sigma=0.454734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.28894e-05 Jy
! Component: 100  -  total flux cleaned = -0.00017143 Jy
! Component: 150  -  total flux cleaned = -0.000245736 Jy
! Component: 200  -  total flux cleaned = -0.000280185 Jy
! Total flux subtracted in 200 components = -0.000280185 Jy
! Clean residual min=-0.002207 max=0.001766 Jy/beam
! Clean residual mean=-0.000001 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.312376 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 86 components and 0.312376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091291Jy  sigma=0.454493
! Fit after  self-cal, rms=0.091287Jy  sigma=0.454485
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091287Jy  sigma=0.454485
! Fit after  self-cal, rms=0.091308Jy  sigma=0.454325
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.633 mas, bmaj=13.66 mas, bpa=-4.597 degrees
! Estimated noise=1.23744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000480973 Jy
! Component: 100  -  total flux cleaned = -0.000479705 Jy
! Component: 150  -  total flux cleaned = -0.000543572 Jy
! Component: 200  -  total flux cleaned = -0.000598937 Jy
! Total flux subtracted in 200 components = -0.000598937 Jy
! Clean residual min=-0.002144 max=0.001885 Jy/beam
! Clean residual mean=-0.000001 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.311777 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.311777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091284Jy  sigma=0.454122
! Fit after  self-cal, rms=0.091277Jy  sigma=0.454098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.39835e-05 Jy
! Component: 100  -  total flux cleaned = -7.64918e-05 Jy
! Component: 150  -  total flux cleaned = -0.000142201 Jy
! Component: 200  -  total flux cleaned = -0.000202491 Jy
! Total flux subtracted in 200 components = -0.000202491 Jy
! Clean residual min=-0.002149 max=0.001841 Jy/beam
! Clean residual mean=-0.000001 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.311574 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 119 components and 0.311574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091267Jy  sigma=0.454015
! Fit after  self-cal, rms=0.091263Jy  sigma=0.454004
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.272 mas, bmaj=8.271 mas, bpa=-4.857 degrees
! Estimated noise=1.01176 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.272 x 8.271 at -4.857 degrees (North through East)
! Clean map  min=-0.0027358  max=0.30527 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.792 mas, bmaj=7.115 mas, bpa=-4.085 degrees
! Estimated noise=1.43197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.238807 Jy
! Component: 100  -  total flux cleaned = 0.290883 Jy
! Component: 150  -  total flux cleaned = 0.302634 Jy
! Component: 200  -  total flux cleaned = 0.306772 Jy
! Total flux subtracted in 200 components = 0.306772 Jy
! Clean residual min=-0.002538 max=0.002733 Jy/beam
! Clean residual mean=-0.000001 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.306772 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.306772 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.272 mas, bmaj=8.271 mas, bpa=-4.857 degrees
! Estimated noise=1.01176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270075 Jy
! Component: 100  -  total flux cleaned = 0.00349303 Jy
! Component: 150  -  total flux cleaned = 0.00366745 Jy
! Component: 200  -  total flux cleaned = 0.00371823 Jy
! Total flux subtracted in 200 components = 0.00371823 Jy
! Clean residual min=-0.002277 max=0.001720 Jy/beam
! Clean residual mean=-0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.31049 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.31049 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.633 mas, bmaj=13.66 mas, bpa=-4.597 degrees
! Estimated noise=1.23744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000510021 Jy
! Component: 100  -  total flux cleaned = 0.000487783 Jy
! Component: 150  -  total flux cleaned = 0.000488291 Jy
! Component: 200  -  total flux cleaned = 0.000488058 Jy
! Total flux subtracted in 200 components = 0.000488058 Jy
! Clean residual min=-0.002127 max=0.001883 Jy/beam
! Clean residual mean=-0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.310978 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.23667e-08 Jy
! Component: 100  -  total flux cleaned = -1.64014e-05 Jy
! Component: 150  -  total flux cleaned = -7.35537e-07 Jy
! Component: 200  -  total flux cleaned = -1.60697e-05 Jy
! Total flux subtracted in 200 components = -1.60697e-05 Jy
! Clean residual min=-0.002125 max=0.001877 Jy/beam
! Clean residual mean=-0.000002 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.310962 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.310962 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.272 mas, bmaj=8.271 mas, bpa=-4.857 degrees
! Estimated noise=1.01176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000160793 Jy
! Component: 100  -  total flux cleaned = -0.000228563 Jy
! Component: 150  -  total flux cleaned = -0.000227186 Jy
! Component: 200  -  total flux cleaned = -0.000225905 Jy
! Total flux subtracted in 200 components = -0.000225905 Jy
! Clean residual min=-0.002231 max=0.001659 Jy/beam
! Clean residual mean=-0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.310736 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 66 components and 0.310736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091269Jy  sigma=0.453921
! Fit after  self-cal, rms=0.091275Jy  sigma=0.453872
wmodel J1312-0424_S_map.mod
! Writing 66 model components to file: J1312-0424_S_map.mod
wobs   J1312-0424_S_uvs.fits
! Writing UV FITS file: J1312-0424_S_uvs.fits
wwins  J1312-0424_S_map.win
! wwins: Wrote 2 windows to J1312-0424_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000907581 Jy
! Component: 100  -  total flux cleaned = -0.00142045 Jy
! Component: 150  -  total flux cleaned = -0.00184291 Jy
! Component: 200  -  total flux cleaned = -0.00213268 Jy
! Component: 250  -  total flux cleaned = -0.00235722 Jy
! Component: 300  -  total flux cleaned = -0.0024661 Jy
! Component: 350  -  total flux cleaned = -0.00259789 Jy
! Component: 400  -  total flux cleaned = -0.00267503 Jy
! Component: 450  -  total flux cleaned = -0.00272537 Jy
! Component: 500  -  total flux cleaned = -0.00277487 Jy
! Component: 550  -  total flux cleaned = -0.00277464 Jy
! Component: 600  -  total flux cleaned = -0.00277441 Jy
! Component: 650  -  total flux cleaned = -0.0027045 Jy
! Component: 700  -  total flux cleaned = -0.0027044 Jy
! Component: 750  -  total flux cleaned = -0.00270431 Jy
! Component: 800  -  total flux cleaned = -0.00268237 Jy
! Component: 850  -  total flux cleaned = -0.00274792 Jy
! Component: 900  -  total flux cleaned = -0.00268304 Jy
! Component: 950  -  total flux cleaned = -0.00268327 Jy
! Component: 1000  -  total flux cleaned = -0.0026203 Jy
! Component: 1050  -  total flux cleaned = -0.00257885 Jy
! Component: 1100  -  total flux cleaned = -0.00249728 Jy
! Component: 1150  -  total flux cleaned = -0.00247742 Jy
! Component: 1200  -  total flux cleaned = -0.0025172 Jy
! Component: 1250  -  total flux cleaned = -0.00245817 Jy
! Component: 1300  -  total flux cleaned = -0.00243877 Jy
! Component: 1350  -  total flux cleaned = -0.0024961 Jy
! Component: 1400  -  total flux cleaned = -0.00243914 Jy
! Component: 1450  -  total flux cleaned = -0.00245804 Jy
! Component: 1500  -  total flux cleaned = -0.00253231 Jy
! Component: 1550  -  total flux cleaned = -0.00258737 Jy
! Component: 1600  -  total flux cleaned = -0.00264194 Jy
! Component: 1650  -  total flux cleaned = -0.00267784 Jy
! Component: 1700  -  total flux cleaned = -0.00267754 Jy
! Component: 1750  -  total flux cleaned = -0.00265992 Jy
! Component: 1800  -  total flux cleaned = -0.00264252 Jy
! Component: 1850  -  total flux cleaned = -0.00259113 Jy
! Component: 1900  -  total flux cleaned = -0.00260838 Jy
! Component: 1950  -  total flux cleaned = -0.00257446 Jy
! Component: 2000  -  total flux cleaned = -0.00254097 Jy
! Component: 2050  -  total flux cleaned = -0.00249134 Jy
! Component: 2100  -  total flux cleaned = -0.0024584 Jy
! Component: 2150  -  total flux cleaned = -0.00245859 Jy
! Component: 2200  -  total flux cleaned = -0.00239391 Jy
! Component: 2250  -  total flux cleaned = -0.00239387 Jy
! Component: 2300  -  total flux cleaned = -0.00234639 Jy
! Component: 2350  -  total flux cleaned = -0.00231492 Jy
! Component: 2400  -  total flux cleaned = -0.00229946 Jy
! Component: 2450  -  total flux cleaned = -0.00222191 Jy
! Component: 2500  -  total flux cleaned = -0.00212958 Jy
! Component: 2550  -  total flux cleaned = -0.00217557 Jy
! Component: 2600  -  total flux cleaned = -0.00209987 Jy
! Component: 2650  -  total flux cleaned = -0.00203963 Jy
! Component: 2700  -  total flux cleaned = -0.00199491 Jy
! Component: 2750  -  total flux cleaned = -0.00190621 Jy
! Component: 2800  -  total flux cleaned = -0.0018914 Jy
! Component: 2850  -  total flux cleaned = -0.00178927 Jy
! Component: 2900  -  total flux cleaned = -0.00176023 Jy
! Component: 2950  -  total flux cleaned = -0.00168845 Jy
! Component: 3000  -  total flux cleaned = -0.00163147 Jy
! Component: 3050  -  total flux cleaned = -0.00163137 Jy
! Component: 3100  -  total flux cleaned = -0.00154697 Jy
! Component: 3150  -  total flux cleaned = -0.00150513 Jy
! Component: 3200  -  total flux cleaned = -0.00151888 Jy
! Component: 3250  -  total flux cleaned = -0.00140877 Jy
! Component: 3300  -  total flux cleaned = -0.00134042 Jy
! Component: 3350  -  total flux cleaned = -0.00129971 Jy
! Component: 3400  -  total flux cleaned = -0.00128637 Jy
! Component: 3450  -  total flux cleaned = -0.00125958 Jy
! Component: 3500  -  total flux cleaned = -0.00120617 Jy
! Component: 3550  -  total flux cleaned = -0.00120616 Jy
! Component: 3600  -  total flux cleaned = -0.00117986 Jy
! Component: 3650  -  total flux cleaned = -0.00120609 Jy
! Component: 3700  -  total flux cleaned = -0.00119303 Jy
! Component: 3750  -  total flux cleaned = -0.00111558 Jy
! Component: 3800  -  total flux cleaned = -0.00115412 Jy
! Component: 3850  -  total flux cleaned = -0.00107784 Jy
! Component: 3900  -  total flux cleaned = -0.00111587 Jy
! Component: 3950  -  total flux cleaned = -0.00109069 Jy
! Component: 4000  -  total flux cleaned = -0.0010407 Jy
! Component: 4050  -  total flux cleaned = -0.000978606 Jy
! Total flux subtracted in 4096 components = -0.00100335 Jy
! Clean residual min=-0.001060 max=0.000904 Jy/beam
! Clean residual mean=0.000000 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.309733 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 331 components and 0.309733 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1312-0424_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.272 x 8.271 at -4.857 degrees (North through East)
! Clean map  min=-0.0016309  max=0.3055 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1312-0424_S_map.fits
wmodel /image_prod/ug002_uva//J1312-0424_S_map.mod
! Writing 331 model components to file: /image_prod/ug002_uva//J1312-0424_S_map.mod
wobs   /image_prod/ug002_uva//J1312-0424_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1312-0424_S_uvs.fits
wwins  /image_prod/ug002_uva//J1312-0424_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1312-0424_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.305501 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000230724 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.22657 0.22657 0.45314 0.90628 1.81256 3.62512 7.25024 14.5005 29.001 58.0019
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.305 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1324.09 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1312-0424_S_dfm.log closed on Thu Mar  5 01:06:26 2020